Rough Terrain Crane 150-ton | 135 mt

Rough Terrain Crane 130-ton | 120 mt

SERIES II
Rough Terrain Crane 110-ton | 100 mt

The industry’s most

innovative solution to big
rough terrain cranes
maneuverability and
transportability!
• Revolutionary hydrostatic
drive on a six-wheeled carrier for
the ultimate in job site mobility
• Maneuverability redefined with over
45 tons (40.8 mt) of on-tire capacity Right side
viewing camera

• Unprecedented transportability
SERIES II

Folding viewing
Rough Terrain Crane 110-ton | 100 mt Rough Terrain Crane 130-ton | 120 mt Rough Terrain Crane 150-ton | 135 mt mirror for travel

Tilting cab 20º

Complete lighting
package

Flat deck design

and non-slip surface
strips on deck

Repositionable ladders Pullout

on front and back Cabwalk™

The Confined Area Lifting Capacities (CALC)

system provides three outrigger positions:
• full retraction
• intermediate extension
• full extension
Retracted Intermediate Full
Outrigger pins eliminate guesswork by automatically
positioning outriggers at midpoint position.
Revolutionary hydrostatic
drive on a 6-wheel carrier
Not only are these cranes easy to get from jobsite to jobsite, they also have
extraordinary creep control and jobsite maneuverability, thanks to their hydrostatic
powered motors in each wheel. The smaller tires give them an overall height that
is ideal for hauling, along with their individual six-wheel hydrostatic drive. There is
no crane in the world, any size, that can come close to the job site maneuverability
and performance of Link-Belt's large RTC Series II machines.

On the job, Link-Belt's large RTC Series II cranes have outstanding on-tire capacity Because of the innovative 6x6x6 hydrostatic drive/steer on each wheel,
coupled with a long reach, maneuverability, incredible gradeability and low height, the turning radius of the 30' 2" (9.2 m) long carrier is a remarkable
making them truly an ideal solution for industrial sites. 21' 10" (6.66 m).

Independent front Independent rear

Coordinated six wheel drive Six wheel "crab"

Operator’s cab provides
ergonomic comfort
and control
• Extra large windows throughout for excellent visibility
• Excellent ventilation via a large sliding door, side
and rear windows, and hinged roof window
• Single or dual axis, electronic operated controller
mounted on armrest for outstanding operator comfort
• Tilting and Telescoping steering column
• 6-way adjustable power tilting seat
• All gauges, switches, indicators, and controls are located
in the operator’s forward line of sight
• All gauges and switches are backlit for excellent
visibility in low light conditions
• Winch and right side swing view cameras
• In cab comfort is maintained by the standard heater
and air conditioning
• Available - Internal and external rated capacity limiter light bars
• Available - Cab mounted warning lights
• Available - LED working light on top of cab

Swing-out doors provide exceptional access to engine components.

Designed for easy access and service

Access is superb with strategically-located
ladders, steps, catwalks and CabWalk.
 Powerful hydraulics
• Removable auxiliary (rear) winch has
hydraulic quick disconnects
• For greater productivity and control,
multiple pump hydraulic circuit allows
simultaneous function
• Piston winch motor provides smooth
and precise hoisting
• Main and available auxiliary winch are
equally matched in size and performance
• Provisions for the future installation
of the auxiliary winch are standard

Work platform & Removable

folding guard rails auxiliary winch

Total crane operating system

with hydraulic
disconnects

Winch viewing
camera
Link-Belt Pulse is the Link-Belt
Partial counterweight and
designed total crane operating
zero counterweight charts
system. It includes the rated
capacity limiter, boom extend
mode controller (EMC),
self-diagnostic capabilities
and continuous monitoring
of multiple crane functions
and conditions. To aid
operators in a safe and
efficient operation, its
high-resolution, color-intense
graphic display provides
excellent contrast even
in direct sunlight.

Folding catwalks on
Telematics. You own the data!
both sides of upper Cellular-based data logging and monitoring system that provides:
• Viewing options for sharing data with distributor and Link-Belt
6x2 and 6x6 drive with • Location and operational settings
23.5R25 tires • Monitor routine maintenance intervals
• Crane and engine monitoring
• Diagnostic and fault codes
 Innovative 10 ft (3.0m) fly is integral
to one of the on-board fly options.
Over 25 tons (22.6 mt) capacity and
one-load two-line lift procedures.

Manual offsets: 2°, 15°, 30°, 45°

Hydraulic offsets: 2°–45°
RTC-80130 II / RTC-80150 II only
No charted capacity deductions
for telescoping loads
18 ft (5.48 m) lattice fly is
interchangeable between models.

The only greaseless,

high-capacity formed
booms designed and
built in North America!

Quick reeve boom head eliminates the

Lighting packages and flood need to remove the becket when it
lights available becomes necessary to change the reeving
Superior capacities and extension ranges

SERIES II
Five section Five section Six section
Full power boom Latching boom Latching boom
STANDARD T1 T2 T3 T4 T1 T2 T3 T4 T5

Amax2 T1 T2 T3 T4 T1 T2 T3 T4 T5

Amax1 T1 T2 T3 T4 T1 T2 T3 T4 T5

T1 T2 T3 T4 T1 T2 T3 T4 T5

T1 T2 T3 T1 T2 T3 T4

FIXED FIXED

55 ft| 16.8 m

31ft | 9.4 m

10 ft | 3 m
Main boom length

RTC-80150 II 195.3 ft | 59.5 m RTC-80150 II 258 ft | 78.6 m 234 ft | 71.3 m 214 ft | 65.2 m
RTC-80130 II 162 ft | 49.3 m RTC-80130 II 225 ft | 68.7 m 202 ft | 61.5 m 181 ft | 55.1 m
RTC-80110 II 150 ft | 45.7 m RTC-80110 II 214 ft | 65.2 m 190.2 ft | 58 m 168.5 ft | 51.3 m

Boom length Tip-Heights – Optional On-board Lattice Fly

Option 1: 31 ft – 55 ft|9.4 – 16.8 m two piece, bi-fold, on-board lattice attachment with 2°, 15°, 30°, and 45°
manual offsets. Option 2: 10-31-55 ft (3.0-9.4-16.8m) three piece, bi-fold, on-board lattice attachment

18 ft +18 ft + 18 ft + 55 ft | 5.5 + 5.5 + 5.5 + 16.8 m

18 ft + 18 ft + 55 ft | 5.5 + 5.5 + 16.8 m

18 ft + 55 ft | 5.5 + 16.8 m

18 ft | 5.5 m

RTC-80150 II 311 ft | 94.8 m 293 ft | 89.3 m 276 ft | 84.1 m 222 ft | 67.7 m

RTC-80130 II* 278 ft | 84.7 m 260 ft | 79.2 m 243 ft | 74.1 m 189 ft | 57.6 m
RTC-80110 II N/A 250 ft | 76.2 m 232 ft | 70.7 m 177.5 ft | 54.1 m

Tip-Heights – Optional Lattice Fly Extension

*The optional 55 ft (16.8m) two or three-piece offsettable bi-fold fly can be extended by adding up to three optional 18 ft (5.5 m) lattice inserts
 Because it is under 10 ft (3 m) wide and features
low overall height, the six-wheel RTC Series II
transports easier than the competition.

Jobsite ready in
less than an hour
Main unit transports under 100,000 lbs (45 mt)

Unlike other big RT’s, boom and tires do not need to

be removed. Therefore, the six-wheel RTC Series II
is ready to be driven off the transport trailer and
begin self-assembly.

The RTC installs its own counterweight

and outrigger boxes to be jobsite ready.

In less than an hour and without

a helper crane, the six-wheel
Rough Terrain Crane Series II
cranes are ready for work.

Lexington, Kentucky | www.linkbelt.com

® Link-Belt is a registered trademark
Copyright 2014 All rights reserved.
We reserve the right to change
designs and specifications at any time.
Litho in U.S.A 12/14 #4458