Scribd
Upload
202 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for pipe according to Saudi Aramco specifications. It lists various tests and inspections that must be performed at different stages of production, including: (1) Visual inspection and review of material certificates by a buyer representative (2) Tests of welding procedures, NDT personnel qualifications, and raw material verification (3) In-process inspections like heat treatment and various mechanical tests such as tensile tests, impact tests, and hydrostatic testing according to various ASTM standards and Saudi Aramco specifications.

Uploaded by

Wael Chouchani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
202 views2 pages

Inspection & Testing Requirements Scope:: Test and Inspection Per

This document outlines inspection and testing requirements for pipe according to Saudi Aramco specifications. It lists various tests and inspections that must be performed at different stages of production, including: (1) Visual inspection and review of material certificates by a buyer representative (2) Tests of welding procedures, NDT personnel qualifications, and raw material verification (3) In-process inspections like heat treatment and various mechanical tests such as tensile tests, impact tests, and hydrostatic testing according to various ASTM standards and Saudi Aramco specifications.

Uploaded by

Wael Chouchani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INSPECTION & TESTING REQUIREMENTS REVISION: 04/27/2017 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 10/31/2016 IR010710 1 of 2


SCOPE: PIPE: ASTM, Carbon Steel for On-Plot Piping, Seamless or Welded, Straight Seam

TEST AND INSPECTION PER: 01-SAMSS-043 & P.O Specifications as Noted Below

(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE


(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010
0010
***
H X
Pre-Fabrication/Production Requirements
Pre Inspection meeting (PIM)
Specification Details / Notes:
Verify company approval of manufacturer’s Inspection and Test
Plan.

0020 R Welding Procedure Specification / Procedure Qualification Per 01-SAMSS-043 and ASME Sec IX.
Records (including repair WPS / PQR)

0030 R Qualification of NDT personnel Per 01-SAMSS-043.

0040 R X Raw Material Verification including Plates Per Applicable ASTM standards.01-SAMSS-043.The HIC
resistant steel plates (HIC/Non HIC resistance as applicable)
shall be procured from Saudi Aramco latest approved steel mills

0020
0010
*** R X
In process inspection & test requirement
Heat Treatment
Specification Details / Notes:
Per 01-SAMSS-043.

0020 Chemical & Mechanical Requirements:

0030 W R Chemical Composition, Heat and Product analysis Per 01-SAMSS-043 and applicable ASTM std.

0040 W R X Mechanical Tests; Tensile, Impact test, Flattening, Hardness, Per 01-SAMSS-043 and applicable ASTM std.
Guided Bends test.

0050 W R X HIC Testing Per 01-SAMSS-043 Annex B (pipes ordered for sour service)
and IR010210.

0060 R Additional requirements for Sour Service Per 01-SAMSS-043

0070 R X Repair welding Per 01-SAMSS-043 (Weld repairs on seamless pipes and
autogenously welded pipes are not permitted).

0080 W X Hydrostatic Test Per 01-SAMSS-043.

0090 R X NDT Examinations: UT, EMI and RT Per 01-SAMSS-043 and applicable ASTM.

0030 *** Final inspection & test requirements Specification Details / Notes:

IR010710 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 04/27/2017 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 10/31/2016 IR010710 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010 H X Visual and Dimensional including Workmanship, Diameter, Wall Per 01-SAMSS-043 and Applicable ASTM Std.
Thickness, Out of roundness, straightness, weld inspection,
Weight, and Lengths

0020 W X Coatings Pipes shall be supplied w/o mill coating unless otherwise
specified in P.O.

0030 W X Marking, Handling, Packing and shipment Per 01-SAMSS-043.

0040 R X Product Material Test Certificate and Quality Data Dossier Per 01-SAMSS-043.

0050 R X Certificate of compliance

0040 *** Additional/Supplemental Requirements Specification Details / Notes:

NOTES:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.

End of IR010710

You might also like