AC-3 ANFO Charger
The Mine-Mate™ AC-3 is a safe, reliable and cost effective solution for quality explosives
charging of bulk ANFO in underground trackless mines.
Features
• Up to 3,000 lbs (1360 kg) ANFO carrying capacity • Heavy duty frame construction
• Single or dual tank configurations • Clean high powered, electronically controlled
• Compact multi-stage extension boom engines
• Two person basket with wide face coverage • Reliable, proven power train components
• Ample storage for blasting accessories • Four wheel drive, articulated steer carrier
• Two stabilizing jacks • Canopy and enclosed cab option
Benefits
• Complete drift coverage from single set-up • Ease of maintenance with electronic engine
• One or two person operation diagnostics, accessible fuel filling and grease
• Rapid travel between work locations points
• Cost benefits in materials handling and in use of • Superior traction due to four wheel drive and
bulk explosives powershift transmission
• Clean burning, fuel-efficient engine minimizes
harmful emissions
Applications
• Production blasthole and long hole charging • Bulk ANFO transport
• Development drifting and breasting • Accurate explosives charging for precision blasting
Page 1 of 4 SB-0137•MEM-AC3 Spec sheet•2011-05-05•JB
Shown with optional equipment included
Weights and Dimensions
Empty vehicle weight – 35,000 lbs (15,900 kg) +/- 40 degrees steering angle
Width- 96” (2.44 m) Inside turning radius – 227” (5.77 m)
Length – 397” (10.1 m) Outside turning radius – 341” (8.66 m)
Tramming height – 102” (2.59 m)
Speed Range
Empty on 0% grade Empty on 15% grade
• •
st
1 gear on flat – 2.5 mph (4.1 km/h) 138– 156 hp (103- 116 kW) - 4.5 mph (7.2 km/h)
• •
nd
2 gear on flat – 5.4 mph (8.7 km/h) 201– 213 hp (150- 158 kW) - 7.0 mph (11.3 km/h)
•
rd
3 gear on flat – 9.4 mph (15.0 km/h)
Page 2 of 4 SB-0137•MEM-AC3 Spec sheet•2011-05-05•JB
Power End Standard Equipment
Frames;
Deutz TCD 2012 L4 liquid cooled diesel engine: • Heavy duty plate construction with modular tear
• Rated 138 hp (103 kW) – Tier 3 down capability
• 4 cylinder – 4 stroke – Electronically controlled • 40 degrees steering angle with dual steering
• Turbo charged / Air to air charge cooled cylinders
• 40 US gal (150 L) diesel tank • Grouped grease fittings for articulation joint,
steering pins and oscillating axle
Dana / Clark-Hurth 32000 powershift transmission; • Heavy duty front and rear bumpers with towing
• 3 speeds forward and reverse capability
• Electric shift control • Articulation lock bar
• Wheel chock holders
Dana / Clark-Hurth 113 axles;
• Rated 33,000 lbs (15,000 kg) capacity each Hydraulic system;
• Internal wet disk brakes – hyd apply • Closed center hydraulic circuit
• Internal SAHR emergency/park brakes • 30 gpm (110 L/min) piston pump
• Limited slip differential • 3000 psi (200 bar) system pressure
• Outboard planetary gears • 25 US gal (95 L) hydraulic tank
• +/- 10 degrees oscillation on power end axle • 10 micron return filter
• Fixed mounting on application end axle
Electrical system;
Brake system; • 24 Volt with master disconnect with lock out
• Independent front/rear hydraulically operated feature
service brakes • 95 amp / 24 volt alternator
• Spring applied, hydraulic released • 800 CCA batteries
emergency/park brakes • 500 amp fuse starter protection
• Automatic Brake Application (ABA) with manual • Re-settable circuit breakers
reset • 6 headlights forward and 4 reverse
• Back-up alarm
Wheels and Tires; • Strobe light
• 12.00 x 20 tire size • Stainless steel enclosures
• 20 ply pneumatic, lugged thread design
Exhaust system;
Driver and passenger compartments; • Purifier and muffler assembly
• Side entry away from articulation joint • Insulation blankets on exposed components
• Driver’s position – Center seated facing outward • Emission test port
• Passenger position – Side seated facing forward
• Deluxe suspension seats with seat belts for driver
and passenger
• Stick steering controls
• Anti-slip dimple plate on all step surfaces
Page 3 of 4 SB-0137•MEM-AC3 Spec sheet•2011-05-05•JB
Application End Standard Equipment
Heavy duty hydraulic aerial lift; Stainless steel ANFO tank;
• Two stage compact boom • 750 lbs (340 kg) or 1000 lb (450 kg) tank size with
• 34 ft x 24 ft (10.3 m x 7.3 m) face coverage remote loading controls
• 38” x 72” (0.97 m x 1.83 m) two person basket • Tank mounted on removable cassette
• 1000 lbs (450 kg) basket payload capacity • 3 point contact from ground level
• Hydraulic cylinders with load holding valves • Vibrator mount on tank side
• Emergency power down from basket
• Remote engine start/stop from basket Stainless steel piping and anti-static loading hose
High powered LED flood lights Storage for blasting accessories
Two 16” (0.41 m) stroke stabilizing jacks
Optional Equipment
Deutz TCD 2012 L6 engine upgrade: Fire suppression, checkfire, and hand held extinguisher
• 6 cylinder rated 208 hp (155 kW)
Auto lube system
Mercedes engine upgrade;
• 4 cylinder rated 147 hp (110 kW) Choice of tires;
• 6 cylinder rated 201 hp (150 kW) with exhaust • Pneumatics, solids and filled
brake and convertor lock-up • Aircraft retreads
Caterpillar power train components; Dual tank configuration
• Cat C6.6 rated 156 hp (116 kW) or 213 hp (158
kW) Dual loading systems
• Cat 535C powershift transmission with convertor
lock-up Upgrade ANFO tanks to;
• Cat 938G drive axles • 1200 lbs (540 kg) or 1500 lbs (680 kg)
Exhaust blankets and shielding Brake inter-locking for stabilizer jacks
HTI coated exhaust manifold and turbo on Deutz/Cat Air operated hydraulics and/or alternator
engines (standard on Mercedes)
Basket pivot with +/- 45 degrees swing
Certified ROPS & FOPS open canopy
Telescopic canopy for basket
Certified ROPS & FOPS enclosed cabin;
“Explosives” back lit sign
• Heating and AC systems
• Pressurized air and sound suppression
Additional options available upon request
• Windshield wiper and washer systems
Manuals and Warranty
Parts, Operators and Maintenance manuals MAC-10 Warranty
• 3 sets of hardcopies • 1 year standard warranty
• “Catbase” or “Link One” electronic parts books • Extended to 2 years on power train
• French and Spanish parts manuals available • Extended to 7 years on frame
*The manufacturer reserves the right to change the specifications or design of this machine at any time without notification.
Page 4 of 4 SB-0137•MEM-AC3 Spec sheet•2011-05-05•JB
