29/12/2019                                          Enoons Cold Caapi Tek - DMT-Nexus Wiki
Enoons Cold Caapi Tek
From DMT-Nexus Wiki
       Note:      This page is a transcription of Enoon's Cold Acetic Acid Extraction of Caapi Tek [1]. The
                  content is to remain accurate as such.
 Contents
         1 Initial Notes
         2 Method
                2.1 Step 1 - Shred Vine
                2.2 Step 2 - Collect and Add Acid
                2.3 Step 3 - Soak
                2.4 Step 4 - Filter and Collect
                2.5 Step 5 - Repeat
                2.6 Step 6 - Filter
         3 Yield & Conclusion
         4 Reference
Initial Notes
I performed a cold acetic acid extraction of white Caapi. A previous extraction via Easy Caapi Vine Alkaloid
Extraction Guide [2] boiling 5x45min yielded ~ 1.2% alkaloids after several prufication steps. So I want to see
if I can reach the same with a cold extraction.
Method
Step 1 - Shred Vine
Begin with whole or partially shredded vine and shred it up as much as possible. This will allow the alkaloids
to migrate to the solution easier.
Step 2 - Collect and Add Acid
This is added to my favorite PP container and approx. 300ml of 3% acetic acid is added.
https://wiki.dmt-nexus.me/Enoons_Cold_Caapi_Tek                                                                  1/6
29/12/2019                                        Enoons Cold Caapi Tek - DMT-Nexus Wiki
  Before shredding.
                                                         After shredding.
  Vine and Acid combined.
Step 3 - Soak
Allow this to soak at room temperature (RT) for 3 days / 72 hours with occasional shaking.
Step 4 - Filter and Collect
After soaking for 72 hours, filter the liquid and set aside. Add another 300ml of 3% acetic acid to the vine and
allow to soak for another 72 hours.
https://wiki.dmt-nexus.me/Enoons_Cold_Caapi_Tek                                                                2/6
29/12/2019                                        Enoons Cold Caapi Tek - DMT-Nexus Wiki
  Shredded Vine in Container.
                                                         300ml of 3% acetic acid.
https://wiki.dmt-nexus.me/Enoons_Cold_Caapi_Tek                                            3/6
29/12/2019                                                Enoons Cold Caapi Tek - DMT-Nexus Wiki
  Fresh acid added on the left, the first pull on the right.
Step 5 - Repeat
Repeat step 4 again 4 times for a total of 5 x 3 day soaks.
Combine the pulls and reduce a bit. After you have reduced the pulls to a manageable level, base with sodium
carbonate or lye.
The orange liquid is decanted off and the alkaloids are washed with fresh distilled water 4 times. Using sodium
carbonate will require you to perform more cleaning steps than using lye but it will work in the end
nonetheless. Your end product should be white or off white. If it's darker like in the pic below, another A/B step
for getting rid of the impurities is in order. Please refer to Easy Caapi Vine Alkaloid Extraction Guide for
purification procedures.
https://wiki.dmt-nexus.me/Enoons_Cold_Caapi_Tek                                                                 4/6
29/12/2019                                              Enoons Cold Caapi Tek - DMT-Nexus Wiki
  From left to right: Na2CO3, decanted water, free-base harmalas
  in suspension after 2 washes. Notice the based alks (using
  Na2CO3) - to get a cleaner product A/B steps are required.
Step 6 - Filter
After you are finished rinsing/washing the alkaloids, it's time to filter them. If you do not have a food
dehydrator it is recommended to hang the filter to allow it to dry from all sides. Alternately you can try to
decant as much water as possible and let the rest evaporate on a pyrex dish.
  Alkaloids caught in filter. These are before final cleaning, hence
  the slightly darker color.
Yield & Conclusion
Yield: After 5 x 3 day pulls, the yield was 1.2% which is the same yield as doing 5 boils.
Conclusion: Save some energy and soak your vine at RT!
Note: I suggest using lye as in Gibran's tek, for several reasons: a) precipitates usually settle in a way that
makes decanting easier. using Na2CO3 can cause a strange kind of emulsion. b) precipitates are much cleaner
and require much less A/B steps. Using Na2CO3 is possible for those that wish to avoid lye for whatever
reason, as I've demonstrated above. But you will have to put in more effort to get the same purity, because for
some reason the precipitation with Na2CO3 catches a lot of insoluble stuff that colors your product and adds
dead/inactive weight to it making dosing more inexact.
https://wiki.dmt-nexus.me/Enoons_Cold_Caapi_Tek                                                                   5/6
29/12/2019                                        Enoons Cold Caapi Tek - DMT-Nexus Wiki
Please remember safety precautions when working with dangerous chemicals!
Reference
     1. ↑ Cold Acetic Acid Extraction of Caapi[1] (https://www.dmt-nexus.me/forum/default.aspx?
        g=posts&t=18043)
     2. ↑ Easy Caapi Vine Alkaloid Extraction Guide Easy Caapi Vine Alkaloid Extraction Guide
Retrieved from "https://wiki.dmt-nexus.me/w/index.php?title=Enoons_Cold_Caapi_Tek&oldid=14150"
Categories: Extraction Tek Allies and Associated Alkaloids
        This page was last modified on 26 July 2015, at 17:43.
https://wiki.dmt-nexus.me/Enoons_Cold_Caapi_Tek                                                   6/6