Revision date: 09/06/2015 Revision: 3a
SAFETY DATA SHEET
NITOBOND AR
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name NITOBOND AR
Product number 1703006UK9,1703010UK9,1703103UK9
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Acrylic Primer
1.3. Details of the supplier of the safety data sheet
Supplier FOSROC Limited
Drayton Manor Business Park
Coleshill Road
Tamworth
Staffordshire
B78 3XN
enquiryuk@fosroc.com
Tel. +44 (0) 1827 262222
Fax. +44 (0) 1827 262444
1.4. Emergency telephone number
Emergency telephone +44 (0) 1827 265 279 (08.30 to 17.00hrs Mon - Thu; 08.30 to 16.00hrs Fri)
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification
Physical hazards Not Classified
Health hazards Not Classified
Environmental hazards Not Classified
Human health See Section 11 for additional information on health hazards.
Environmental The product is not expected to be hazardous to the environment.
2.2. Label elements
Hazard statements NC Not Classified
2.3. Other hazards
This product does not contain any substances classified as PBT or vPvB.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
Composition comments None of the ingredients are required to be listed.
SECTION 4: First aid measures
1/7
Revision date: 09/06/2015 Revision: 3a
NITOBOND AR
4.1. Description of first aid measures
General information No specific recommendations. Move affected person to fresh air and keep warm and at rest in
a position comfortable for breathing.
Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable for
breathing. Keep affected person under observation.
Ingestion Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse
mouth thoroughly with water. Get medical attention if any discomfort continues.
Skin contact Remove affected person from source of contamination. Remove contaminated clothing
immediately and wash skin with soap and water.
Eye contact Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15
minutes.
4.2. Most important symptoms and effects, both acute and delayed
General information No specific symptoms noted.
Inhalation No specific symptoms known.
Ingestion May cause discomfort if swallowed.
Skin contact No specific symptoms known.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media Extinguish with foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media
5.2. Special hazards arising from the substance or mixture
Specific hazards Material can splatter above 100'C. Polymer film can burn. Irritant fumes.
Hazardous combustion Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or
products vapours. Oxides of carbon.
5.3. Advice for firefighters
Protective actions during Move containers from fire area if it can be done without risk. No specific firefighting
firefighting precautions known. Control run-off water by containing and keeping it out of sewers and
watercourses.
Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions For personal protection, see Section 8.
6.2. Environmental precautions
Environmental precautions Avoid the spillage or runoff entering drains, sewers or watercourses.
2/7
Revision date: 09/06/2015 Revision: 3a
NITOBOND AR
6.3. Methods and material for containment and cleaning up
Methods for cleaning up Absorb spillage with non-combustible, absorbent material. Collect and place in suitable waste
disposal containers and seal securely.
6.4. Reference to other sections
Reference to other sections For waste disposal, see section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions Good personal hygiene procedures should be implemented.
7.2. Conditions for safe storage, including any incompatibilities
Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place.
Storage class Chemical storage.
7.3. Specific end use(s)
Specific end use(s) The identified uses for this product are detailed in Section 1.2.
SECTION 8: Exposure Controls/personal protection
8.1. Control parameters
Ingredient comments No exposure limits known for ingredient(s).
8.2. Exposure controls
Protective equipment
Appropriate engineering Provide adequate general and local exhaust ventilation.
controls
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible. The following protection should be worn: Chemical splash goggles.
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if
a risk assessment indicates skin contact is possible. It is recommended that gloves are made
of the following material: Polyvinyl chloride (PVC). Rubber (natural, latex).
Other skin and body Wear appropriate clothing to prevent any possibility of skin contact. Wear apron or protective
protection clothing in case of contact.
Hygiene measures Do not smoke in work area. Wash hands at the end of each work shift and before eating,
smoking and using the toilet. Wash promptly if skin becomes contaminated. Promptly remove
any clothing that becomes contaminated. When using do not eat, drink or smoke.
Respiratory protection No specific recommendations.
SECTION 9: Physical and Chemical Properties
9.1. Information on basic physical and chemical properties
Appearance Liquid.
Colour White.
Odour Acrylic
3/7
Revision date: 09/06/2015 Revision: 3a
NITOBOND AR
Odour threshold Not determined.
pH pH (concentrated solution): 9.5 - 10
Melting point 0°C
Initial boiling point and range 100°C @ 1 atm
Flash point Not applicable.
Flammability (solid, gas) Not applicable.
Upper/lower flammability or The product is not flammable.
explosive limits
Other flammability Not applicable.
Vapour pressure 2.3 kPa @ 20°C
Vapour density Not determined.
Relative density 1.06 @ 20°C
Bulk density Not applicable.
Solubility(ies) Emulsible in water.
Auto-ignition temperature Not applicable.
Viscosity 50 - 200 mPa s @ 23°C
Explosive properties Not considered to be explosive.
Explosive under the influence Not considered to be explosive.
of a flame
Oxidising properties Does not meet the criteria for classification as oxidising.
9.2. Other information
Other information Not available.
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stability Stable at normal ambient temperatures.
10.3. Possibility of hazardous reactions
Possibility of hazardous None known.
reactions
10.4. Conditions to avoid
Conditions to avoid Temperatures below 2'C.
10.5. Incompatible materials
Materials to avoid None known.
10.6. Hazardous decomposition products
Hazardous decomposition Thermal decomposition may yield acrylic monomers.
products
4/7
Revision date: 09/06/2015 Revision: 3a
NITOBOND AR
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Toxicological effects This product has low toxicity.
Acute toxicity - oral
Acute toxicity oral (LD₅₀ 5,000.0
mg/kg)
Species Rat
Notes (oral LD₅₀) The toxological assessment is based on a knowledge of the toxicity of the product's
components.
Acute toxicity - dermal
Acute toxicity dermal (LD₅₀ 5,000.0
mg/kg)
Species Rabbit
Notes (dermal LD₅₀) The toxological assessment is based on a knowledge of the toxicity of the product's
components.
General information No specific health hazards known.
Inhalation Low volatility makes inhalation unlikely at ambient temperature.
Ingestion Low order of acute toxicity. May cause irritation of mouth, throat and digestive tract.
Skin contact Unlikely to irritate on brief or occasional exposure.
Medical symptoms No specific symptoms noted, but this chemical may still have adverse health impact, either in
general or on certain individuals.
SECTION 12: Ecological Information
Ecotoxicity The product components are not classified as environmentally hazardous. However, large or
frequent spills may have hazardous effects on the environment.
12.1. Toxicity
Toxicity Not expected to be ecotoxic to fish/daphnia/algae
12.2. Persistence and degradability
Persistence and degradability The product is biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential Not expected to be bioaccumulative
12.4. Mobility in soil
Mobility The product is miscible with water. May spread in water systems.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB This substance is not classified as PBT or vPvB according to current EU criteria.
assessment
12.6. Other adverse effects
Other adverse effects Not applicable.
5/7
Revision date: 09/06/2015 Revision: 3a
NITOBOND AR
SECTION 13: Disposal considerations
13.1. Waste treatment methods
General information When handling waste, the safety precautions applying to handling of the product should be
considered.
Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority.
SECTION 14: Transport information
General The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
No transport warning sign required.
14.4. Packing group
Not applicable.
14.5. Environmental hazards
Environmentally hazardous substance/marine pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations The Control of Substances Hazardous to Health Regulations 2002 (SI 2002 No. 2677) (as
amended).
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (SI 2009
No. 716).
EU legislation Commission Regulation (EU) No 453/2010 of 20 May 2010.
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).
Guidance Workplace Exposure Limits EH40.
6/7
Revision date: 09/06/2015 Revision: 3a
NITOBOND AR
Authorisations (Title VII No specific authorisations are known for this product.
Regulation 1907/2006)
Restrictions (Title VIII No specific restrictions on use are known for this product.
Regulation 1907/2006)
15.2. Chemical safety assessment
No chemical safety assessment has been carried out.
SECTION 16: Other information
Revision comments NOTE: Lines within the margin indicate significant changes from the previous revision.
Revision date 09/06/2015
Revision 3a
SDS number 12509
Risk phrases in full NC Not classified.
This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
7/7
