Scribd
Upload
144 views1 page

High Strength Low Alloy Steel Welding Wire

This document summarizes the specifications of Automig 110S-G and Tigfil 110S-G welding wires, which are copper coated medium alloy steel wires for welding high strength low alloy steels. The wires exhibit high strength and low temperature toughness with excellent welding characteristics. They are suitable for welding applications such as large vehicles, cranes, pipelines and containers.

Uploaded by

Jagannath Sahu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
144 views1 page

High Strength Low Alloy Steel Welding Wire

This document summarizes the specifications of Automig 110S-G and Tigfil 110S-G welding wires, which are copper coated medium alloy steel wires for welding high strength low alloy steels. The wires exhibit high strength and low temperature toughness with excellent welding characteristics. They are suitable for welding applications such as large vehicles, cranes, pipelines and containers.

Uploaded by

Jagannath Sahu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AUTOMIG 110S-G / GMAW/GTAW

LOW ALLOY STEEL


TIGFIL 110S-G (High Strength)

COPPER COATED MEDIUM ALLOYED WIRE FOR HIGH STRENGTH APPLICATION

CLASSIFICATION : AWS A/SFA 5.28


ER110S-G

KEY FEATURES :
• Copper coated medium alloy steel wire • Exhibit excellent out of position characteristics
• Exhibit high strength as well as low temperature • Radiographic quality
toughness
• Excellent welding characteristics

GMAW: DCEP
WELDING POSITION :
GTAW: DCEN
Shielding Gas Gas Flow Rate, LPM Stickout, mm
GMAW: 80Ar+20CO2 15-25 15-25
GTAW: Ar 10-15 -

TYPICAL APPLICATIONS :

• Welding of high strength low alloy steels • Joining large vehicles and crane manufacturing
• Welding of HY 80 and other similar grade materials • Pipelines, tankers, containers

STORAGE / HANDLING :

Keep dry during storage and handling

CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :


C Mn Si Cr Ni Mo Cu S P
Typical 0.09 1.6 0.6 0.3 1.4 0.3 0.1 0.015 0.015

MECHANICAL PROPERTIES OF ALL WELD METAL :


YS at 0.2% CVN Impact at
Condition UTS, MPa EL%
offset, MPa -40°C, J
Typical As Welded 830 735 23 70
Mechanical properties of weld metal will vary with the type of shielding gas used

PACKING DATA :
Ø, mm Kg/Spool
Automig 110S-G 1.2 15
1.6 15
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
1.6 x 1000 5 4 20
Tigfil 110S-G
2.0 x 1000 5 4 20
2.5 x 1000 5 4 20

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

27

You might also like