JVD-HR4

VERTICAL DUAL DIPOLE FLAT PANEL

ANTENNA
The JAMPRO JVD-HR4 antenna is a half wave spaced dual
dipole vertically polarized flat panel antenna system. Galva-
nized steel panel construction & stainless steel dipole insures
many years of dependable performance. The JHD antenna
has been proven to have excellent bandwidth, with typical
VSWR of <1.05:1 on carrier, and <1.1:1 across the channel.
Many standard and custom directional patterns are available
to fit any of your coverage requirements.

Designed for high band VHF

0
(Ch 7-13) band III (174-230 MHz) 340
350
0 dB
10
20
330 30
-3
320 40
Typical single channel VSWR <1.1:1 on channel 310 -6 50

300 -9 60

Omni-directional or custom 290

-12
70
directional patterns -15
280 80

Hot dipped galvanized steel construction 270 90

260 100

Stainless steel dipoles 250 110

240 120

Custom mounting brackets available for 230 130

easy installation 220 140

210 150
200 160

Single panel gain 7.5 dBd is at mid-band 8.0 dB

190 170
180

Gain at high end of band III

Standard 4 Around Omni Azimuth Pattern

6340 Sky Creek Dr, Sacramento, CA 95828 | T: 916.383.1177 | F: 916.383.1182 JAMPRO.com

 JVD-HR4

JAMPRO JVD HR4 BROADCAST ANTENNA 

# Bays  Panels per Bay  Gain ( mes)  Gain (dBd)  Height ( ) / m  Net Weight/Windload 
2  6.6  82 
1  3  4.5  6.5  9.7 ft / 2.96 m 
4  3.3  5.2 
2  13.2  11.2 
2  3  8.9  9.5  20.3 ft / 6.19 m 
4  6.6  8.2 
2  26.3  14.2 
4  3  17.8  12.5  41.9 ft / 12.77 m  Contact Factory 
4  13.2  11.2 
2  39.8  16.0 
6  3  26.9  14.3  62.5 ft / 19.05m 
4  20.0  13.0 
2  55.0  17.4 
8  3  35.5  15.5  85.1 ft / 25.94 m 
4  26.3  14.2 
All stated gains are Peak gains. Gains do not include losses for feed system, beam tilt or null fill.

Notes: 7. VSWR for individual panels and complete

systems typical < 1.1:1
1. Weights and windloads contact factory.
8. Power rating per panel varies with input power
2. All input EIA flange, female 50 ohm
9. Total number of frequencies/channels limited only by total
3. Input N, 7/16 or 7/8 (other type of connectors input power.
on request).
10. In an omni-directional configuration typical circularity +/-
4. Frequency range one channel in Band III 1.5 dBor better. Directional patterns available
(174-230 MHz).
Options
5. Null fill and beam tilt on request. Options available include FCC-Directionalization, Pattern
Measurement Service, beam tilt, null fill, and special mount-
6. Specifications are based on one wave spaced bays.
ing brackets.
Other spacing available.

Non-ionizing Radiation

Since many factors contribute to a station’s compliance with the FCC exposure guidelines for radio frequency
radiation, JAMPRO Antennas, Inc. cannot accept any responsibility in this matter. The station must examine and determine its
status based on each individual situation.

*All specifications are subject to change.

6340 Sky Creek Dr, Sacramento, CA 95828 | T: 916.383.1177 | F: 916.383.1182 JAMPRO.com