10/12/2016
0 A.D. L.A.N. Tutorial
Basic setup
Stanislas Dolcini
Stanislas Dolcini
0 A.D. L.A.N. TUTORIAL
Prerequisites
Some 0 A.D. knowledge (how to set up a game, choose match, etc).
A working LAN network, with a DHCP router. (Using a switch requires more settings).
Very few knowledge about windows (Where to find the run command Windows key + R).
0 A.D. installed on each machine you want to play with.
The same mods on both side.
Some patience.
Disclaimer: The game is still in Alpha state and is likely to change. While unlikely, I cannot
guarantee that this process will always be applicable.
Summary
Prerequisites ___________________________________________________ 1
Summary ______________________________________________________ 1
Setting up the host side __________________________________________ 2
Gather information___________________________________________________ 2
Configure the game __________________________________________________ 3
Setting up the client side _________________________________________ 5
Configure the game __________________________________________________ 5
1
Stanislas Dolcini
0 A.D. L.A.N. TUTORIAL
Setting up the host side
Gather information
1. Just type ‘cmd’ (without quotes) in it. It will run the command line.
2. Look for the line IPV4 in word it’s the one you’ll need for others on your local network to
connect to you.
Note: DHCP line is the address of the router, it can be nice to know that, should you need
to edit some parameters in it.
3. Close the command line.
4. Look for the game shortcut, and click on it.
2
Stanislas Dolcini
0 A.D. L.A.N. TUTORIAL
Configure the game
1. Click ‘Multiplayer’.
2. Click ‘Host Game’.
3. Set up your player name (All must be different else it won’t work)
3
Stanislas Dolcini
0 A.D. L.A.N. TUTORIAL
Note: Sometimes a pop-up will open because the firewall needs to know how it should
react to the game sending data. Just tick both the checkboxes, the second one is to be
able to play outside your home. Then press the button with the bicolor shield.
4. You should now see this window
5. Done, the host is now configured and he can set up the game.
4
Stanislas Dolcini
0 A.D. L.A.N. TUTORIAL
Setting up the client side
Configure the game
1. Click ‘Multiplayer’.
2. Click ‘Join Game’.
3. Type the IP address you got from the host here ‘192.168.1.100’
5
Stanislas Dolcini
0 A.D. L.A.N. TUTORIAL
4. Press ‘Continue’.
5. You should now be connected to your friend.
6. Have fun!