Scribd
Upload
181 views2 pages

Router Interface Card For Loop-AM3440: Features

This document describes a router interface card for the Loop-AM3440 access DCS-MUX series. The card combines router and DTE functions, allowing access from LAN to WAN within a single device. It features 2 LAN ports, supports up to 31 WAN ports, and common protocols including TCP/IP, PPP, and HDLC. Management is enabled through VT-100 and SNMP. When ordered, the card can be used within AM3440-A/B/C devices to add routing, bridging, or in-band management capabilities.

Uploaded by

jorge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
181 views2 pages

Router Interface Card For Loop-AM3440: Features

This document describes a router interface card for the Loop-AM3440 access DCS-MUX series. The card combines router and DTE functions, allowing access from LAN to WAN within a single device. It features 2 LAN ports, supports up to 31 WAN ports, and common protocols including TCP/IP, PPP, and HDLC. Management is enabled through VT-100 and SNMP. When ordered, the card can be used within AM3440-A/B/C devices to add routing, bridging, or in-band management capabilities.

Uploaded by

jorge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Router Interface Card

for Loop-AM3440

Features
 10 BaseT, 10 /100 BaseT interfaces
 Routing protocols RIP-I, RIP-II
 Software field upgradable
 Data rates channelized N x 64 kbps up to T1/ E1 capacity
 Supports TCP/IP, PPP, HDLC protocols
 Management through VT-100 and SNMP
 RJ45 connectors

Description
The router plug-in card is designed for the Loop-AM3440 Access DCS-MUX series. When used with the
Loop-AM3440 series, this card combines the function of a router and an DTE. With this card, access from
LAN to WAN is accomplished within one box, saving both space and money.

Ordering Information
Note: RoHS compliant units are identified by the letter G appearing immediately at the end of ordering code.

Model Model Description Note


(non RoHS compliant) (RoHS compliant)
Loop-AM3440-RT Loop-AM3440-RT-G Router / Bridge Card This card can be used in
AM3440-A/B/C only

Router Interface Card for Loop-AM3440 Product Specifications


Router Interface
Number of ports 2 LAN ports, Max. 31 WAN ports
Physical Interface 10 Base T x 1, 10/100 BaseT x 1
Connector RJ45
Routing protocol RIP-I, RIP-II
Data Rates Channelized N x 64 Kbps up to T1/E1 capacity
Supporting Protocols TCP/IP, PPP, HDLC
Management VT-100, SNMP

Remote Bridge Interface


Ethernet functions Up to 8K MAC table
Cisco ISL packet transparent
VLAN packet transparent
Padding/un-padding Ethernet FCS

1
Router Interface for Loop-AM3440 Plug-in Modules

Application Illustration

As a Router
WAN

Loop-AM 3440 E1/ T1

Router

LAN 1 LAN 2

As an Inband Management Element

Loop-AM3440
Router E1/ T1

LAN Network
WAN
Element
Network
Management
Workstation

As a LAN Bridge
LAN LAN

Loop-AM 3440 Loop-AM 3440


Bridge E1/ T1 WAN E1/ T1 Bridge

LOOP TELECOMMUNICATION INTERNATIONAL, INC.


www.looptelecom.com ISO 9001 / ISO 14001
Worldwide Europe Americas Australia & New Zealand
6F, No. 8, Hsin Ann Road Rue de Culot, 13 8 Carrick Road 3 Imperial Ave, Mount
Hsinchu Science Park BE-1402 Nivelles Palm Beach Gardens Waverley, Victoria 3149,
Hsinchu, Taiwan 30078 Belgique Florida 33418, U.S.A. Australia
+886-3-578-7696 +32-496-54-27-44 +1-561-627-7947 +61-413-382-931
sales@looptelecom.com eu_sales@looptelecom.com ncsa_sales@looptelecom.com aus_sales@looptelecom.com

 2007 Loop Telecommunication International, Inc. All Rights Reserved


Version 3 28 November 2007 Subject to change without notice

You might also like