Scribd
Upload
335 views2 pages

User Guide For Software BMS

This document is a user guide for a smart battery management system produced by Shenzhen SmarTec Technology Co., Ltd. It provides instructions on how to read battery data from the BMS by connecting an EV2300 or EV2400 communication tool to the BMS terminals and downloading battery management software. Any changes to technical parameters should be done by a professional or by contacting SmarTec directly.

Uploaded by

Alex Reznichenko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
335 views2 pages

User Guide For Software BMS

This document is a user guide for a smart battery management system produced by Shenzhen SmarTec Technology Co., Ltd. It provides instructions on how to read battery data from the BMS by connecting an EV2300 or EV2400 communication tool to the BMS terminals and downloading battery management software. Any changes to technical parameters should be done by a professional or by contacting SmarTec directly.

Uploaded by

Alex Reznichenko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Smart Battery Management System

- Enjoy A Easy Life-

( User Guide)

Shenzhen SmarTec Technology Co.,ltd


(Dongguan SmarTec New Energy Technology Co.,ltd)

Shenzhen office:
Add:4/F,Block A,Huiqing Technology Park,Guanguang Road,Guanlan,Longhua
District,Shenzhen city,China, PostCode: 518110

Dongguan Factory:
Add:1-5/F,Unit 2,Block 10,ZijingZhizao Center,Liheshuangqing Innovation Base,Qingxi
Town,Dongguan City,China,Postcode:523650

Tel: +(00) 86-755-29588990 29588991


Fax: + (00)86-755-29588995
Website: www.szsmartec.com / www.en.szsmartec.com

* PCM /BMS / Battery Pack Solution*


3. Download the upper software “ Battery Managment Studio” on website
How to read the battery data of BMS ? www.ti.com (or to be provided by our company) , then set up the
1. Need a communication tool- EV2300 or EV2400 parameters based on specifications.

2. With EV2300: First, Connect the battery terminals of GND, SMBC,SMBD


through data cable to the above tools’ (SMB interface) GND,
SMBC,SMBD., and then the tool and PC should be connected with USB Remark: if you want to make any changes of technical parameters , just
wire. (pls noted: the B+ can not be connected when communicated with find the correct “user guide” based on your IC of BMS from website:
upper computer.) – as figure 1 (For EV2400: connect the VSS,SDA,SCL) www.ti.com . For example, bq40z50 will be done like this-

** pls noted: Any changes of technical parameters setting should be made


by a professional engineer ,otherwise it will done from our side**

For more questions, kindly contact with us ! E-mail: smartec@szsmartec.com www.szsmartec.com

You might also like