ARIEL HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 24 x 117 stitches (roughly 5cm x 20cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (9 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (2 colours – see colour
key below)
DMC Satin embroidery threads (1 colour – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
PRINCESS AURORA (BLUE) HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 120 stitches (roughly 5cm x 20cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (10 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (3 colours – see colour
key below)
DMC Satin embroidery threads (2 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
PRINCESS AURORA (PINK) HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 120 stitches (roughly 5cm x 18.5cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (9 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (3 colours – see colour
key below)
DMC Satin embroidery threads (3 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
BELLE HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 24 x 125 stitches (roughly 5cm x 18.5cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (12 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (2 colours – see colour
key below)
DMC Satin embroidery threads (2 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key
Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
CINDERELLA HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 106 stitches (roughly 5cm x 16.5cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (10 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (5 colours – see colour
key below)
DMC Satin embroidery threads (2 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
PRINCESS JASMINE HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 123 stitches (roughly 5cm x 18.5cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (8 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (3 colours – see colour
key below)
DMC Satin embroidery threads (2 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
MULAN HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 128 stitches (roughly 5cm x 22cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (10 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (6 colours – see colour
key below)
DMC Satin embroidery threads (2 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
POCAHONTAS HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 110 stitches (roughly 5cm x 17.5cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (12 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (5 colours – see colour
key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
RAPUNZEL HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 136 stitches (roughly 5cm x 22.5cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (11 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (4 colours – see colour
key below)
DMC Satin embroidery threads (2 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
SNOW WHITE HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 25 x 105 stitches (roughly 5cm x 17cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (11 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (4 colours – see colour
key below)
DMC Satin embroidery threads (1 colour – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
TIANA HALF PROFILE BOOKMARK
Cross-Stitch embroidery pattern
Created by Misha (bludelfin) at thegeeksgrotto.etsy.com
Pattern is 22 x 125 stitches (roughly 5cm x 21.5cm)
This pattern uses full cross-stitches, 3/4 cross-stitches, and backstitch.
All cross-stitches are done with 2 ply (strands), and all backstitch is done in 1
ply, unless stated otherwise.
Items required for this project:
14-count Aida cloth
(Preferrably 5cm/2 inch wide banding)
Embroidery needles
DMC Standard embroidery threads (7 colours – see colour key below)
DMC Metallic/Light Effects embroidery threads (4 colours – see colour
key below)
DMC Satin embroidery threads (2 colours – see colour key below)
Fray stop (optional – can sew edges to seal if preferred)
Felt backing (optional)
Time for stitching!
Due to the fact that the back stitch used in this pattern is mostly edging work, I have
provided a view of the backstitch without the rest of the stitching. This is done to try and
make it easier for you to see where all the back stitch is, rather than having it blend into
the rest of the pattern.
Standard Colour Key Metallic Colour Key
Satin Colour Key
Full Cross-Stitch & ¾ Stitch / Backstitch Guides
Combined Guide
