Nooie Smart Plug
PA10
Quick Start Guide
Product Overview
LED Indicator
ON/OFF Button
Reset: Press and hold for 5 seconds.
Warning
Nooie Plug only supports 2.4GHz Wi-Fi network.
1. Use your smart plug only in indoor environments.
2. Keep away from water and flames that may cause fire, electric shock, or other damage.
3. Make sure the appliance is off before you plug it into the smart plug.
4. Do not use the plug to operate appliances (e.g. stoves, heaters) where continuous or unsupervised
operation could be dangerous.
Setup
1. Scan the QR codes or go to the App Store to
download the Nooie Home app. Create an account
to add your device.
2. Plug your device directly into a three-pronged
grounded outlet.
3. Follow the instructions in the app to connect the device
to your network.
LED Indicator
Flashing White Steady White
Connecting in progress. The device is working properly.
Specification Customer Care
Model PA10 Have any questions?
Color White Check out the FAQ on our website：
www.nooie.com/support
Working Temp -10 ~ 60° C
Wi-Fi Requirement 2.4GHz Want to give your feedback?
Input Voltage AC 120V Tag us #nooie on social media.
Maximum Output 10A
Compatibility iOS, Android
Product Weight 52.6g
Need more help?
Contact us at support@nooie.com
Warranty Terms
1. 30-day return policy and a two-year limited warranty.
2. Timely customer service via support@nooie.com
3. Lifetime technical support provided by Nooie.
FCC ID & IC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
“Please note that changes or modifications of this product is not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.”
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
his device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Scienceand
Economic Development Canada's licenseexemptRSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L'émetteur/récepteur exempt de licencecontenu dans le présentappareilestconforme aux CNR d'Innovation,
Sciences et Développementécono-mique Canada applicables aux appareils radioexempts de licence.
L’exploitationestautorisée aux deux conditions suivantes :
1) L 'appareil ne doit pas produire de brouillage;
2) L 'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le
brouillageestsusceptible d 'encom promettre le fonctionnement.
This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled
environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation
distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any
other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between
the device (excluding its handset) and users.
Cetappareilestconforme aux limitesd’exposition au rayonnement RF stipulées par la FCC et l’IC pour
uneutilisation dans un environnement non contr?lé. Les antennesutilisées pour
cetémetteurdoiventêtreinstallées et doiventfonctionner à au moins 20 cm de distance des utilisateurs
et ne doivent pas êtreplacéesprèsd’autresantennesouémetteursoufonctionner avec ceux-ci.
Les in-stallateursdoivents’assurerqu’une distance de 20 cm séparel’appareil (à l’exception du combiné)
des utilisateurs.
Works with
Website: www.nooie.com
Email: support@nooie.com
Designed in USA Made in China
