0% found this document useful (0 votes)
39 views2 pages

Agreement: United Nations

This document outlines amendments made to regulations regarding retro-reflecting devices installed on vehicles. The key change is an update to paragraph 4.3 to clarify that the markings on retro-reflecting devices must be visible from outside the vehicle when installed. This document revises an earlier agreement between parties concerning adopting uniform technical standards for vehicle equipment and parts.

Uploaded by

M
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
39 views2 pages

Agreement: United Nations

This document outlines amendments made to regulations regarding retro-reflecting devices installed on vehicles. The key change is an update to paragraph 4.3 to clarify that the markings on retro-reflecting devices must be visible from outside the vehicle when installed. This document revises an earlier agreement between parties concerning adopting uniform technical standards for vehicle equipment and parts.

Uploaded by

M
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

E/ECE/324/Add.2/Rev.3/Amend.4−E/ECE/TRANS/505/Add.2/Rev.3/Amend.

4
6 August 2013

Agreement

Concerning the Adoption of Uniform Technical Prescriptions for


Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be
Used on Wheeled Vehicles and the Conditions for Reciprocal
Recognition of Approvals Granted on the Basis of these Prescriptions*

(Revision 2, including the amendments which entered into force on 16 October 1995)

_________

Addendum 2 – Regulation No. 3

Revision 3 - Amendment 4

Supplement 13 to the 02 series of amendments – Date of entry into force: 15 July 2013

Uniform provisions concerning the approval of retro-reflecting devices


for power-driven vehicles and their trailers

_________

UNITED NATIONS

* Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of
Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at
Geneva on 20 March 1958.

GE.13-
E/ECE/324/Add.2/Rev.3/Amend.4
E/ECE/TRANS/505/Add.2/Rev.3/Amend.4

Paragraph 4.3., amend to read:


"4.3. The markings must be visible from the outside when the retro-reflecting
device is fitted on the vehicle."

You might also like