Passenger Terminal Expansion Works –

Central Concourse Building and Early Works (HIAEP-0013)

Material Submittal Approval Request for

(GROOVED FITTINGS)

(NATIONAL- INDIA)

Document No. : ME-00013-A7120-CN-MTT-A-MAR-0003-R Rev.0

Issue Status : For Approval

Prepared Checked and Reviewed by: Approved by:

by:

Name Volkan Nazlim Ashraf Allam Salah Al Moukhtar

Technical Technical Office QA/QC

Subcontractor Discipline
Job Title Name Engineer
Manager OR Coordinator Project Director
MEP Manager Manager Manager

Signature

Date

Document No. ME-00013-A7120-CN-MTT-S-PQD-0003-R Rev.0 Page 1 of 2

Current version of this document is available online on the local intranet in electronic format.
 REVISION HISTORY

Rev. Date Change Description

Document No. ME-00013-A7120-CN-MTT-S-PQD-0003-R Rev.0 Page 2 of 2

Current version of this document is available online on the local intranet in electronic format.
 Sub: SUBMITTAL FOR NATIONAL FITTINGS- INDIA

PROJECT NAME

Passenger Terminal Expansion Works - Central Concourse Building

and Early Works (HIAEP-0013)

CONSULTANT

HALL-DAR

MAIN CONTRACTOR

TAV Construction

MEP CONTRACTOR

MIDMAC WLL
 TABLE OF CONTENTS

1. MANUFACTUERE’S COMPANY PROFILE

2. MANUFACTURER’S ISO
3. DATASHEET & PRODUCT CATALOGUE
4. QCS 2014 EXTRACTED SPECIFICATIONS
5. COMPLIANCE STATEMENT
6. MATERIAL TEST REPORTS
7. QCDD APPROVAL
8. UL-FM APPROVALS
9. PREVIOUS APPROVALS
10. AUTHARIZATION LETTER
11. COUNTRY OF ORIGIN
12. WARRANTY
1. MANUFACTURER’S COMPANY PROFILE
2. MANUFACTURER’S ISO
3. DATASHEET & PRODUCT CATALOGUE
4. QCS-2014 EXTRACTED SPECIFICATIONS
5. COMPLIANCE STATEMENT
 COMPLIANCE STATEMENT
PROJECT : Passenger Terminal Expansion Works
SUBJECT : Compliance Statement
DESCRIPTION : GENERAL COMPLIANCE STATEMENT FOR GROOVED FITTINGS AS PER QCS
CONSULTANT : HILL-DAR 26/5/2020
MEP CONTRACTOR : MIDMAC WLL
Reason for Deviations
QCS STD. EQUIPMENT DETAILS- QCS STD. CONTRACT REQUIREMENT CETC Proposal
, if any
DUCTILE IRON GROOVED FITTINGS "NATIONAL" INDIA (QCS-2014- SECTION 23 PART 4.6.2)

4.6 PIPES & FITTINGS

Pipes shall be UL listed and FM approved. They shall be exterior

galvanized steel to ASTM A 135 with a working pressure of
14.5 bar. Couplings may be of the rolled groove type or the
4.6.1 GENERAL Not in Our Scope
mechanical locking type (push-on). Pipe end preparation for the
mechanical locking type couplings will be in accordance with the
manufacturer‟s recommendations

Fittings shall be UL listed and FM approved. Mechanical grooved

4.6.2 pipe couplings and fittings as manufactured by specialised Complied UL FM Approved
manufacturers shall be used for all stand pipe systems

couplings shall be ductile iron to ASTM A 536, or malleable iron

to ASTM A 47, withchlorinated butyl gaskets suitable for an
4.6.2 (A) operating temperature of 95oC and heat treated carbon steel
Complied Ductile Iron
bolts and nuts to ASTM A 183

fittings shall be malleable iron to ASTM A 47 or ductile iron to

4.6.2 (B) Complied Ductile Iron
ASTM A 536 with grooved or shouldered ends

Flanges shall be malleable iron to ASTM A 47 or ductile iron

to ASTM A 536, with a hinged, two-piece design, suitable for
4.6.2 (C ) opening and engaging the groves, and shall be secured in position Complied Ductile Iron
with a tight-fitting lock bolt. Cast iron flanges shall comply with
ANSI B.16.1 and steel flanges steel shall comply with ANSI B 16.5

valves shall be grooved end design with encapsulated body

and disc. Neck design shall readily accommodate insulation.
4.6.2 (D) Valves shall have pressure assisted double seal and be capable Complied
of 12 bar bubble tight shutoff. Butterfly valves shall be with
gear actuator

SUPPLIER: City Electrical Trading & Contracting Doha, Qatar. Email: info@cetcqatar.com M/S. MIDMAC

NAME: DINESH CHAUDHARY NAME :

Signature: Signature :

Page 1 of 1
 COMPLIANCE STATEMENT
PROJECT : Passenger Terminal Expansion Works
SUBJECT : Compliance Statement
DESCRIPTION : COMPLIANCE STATEMENT FOR GROOVED FITTINGS AS PER PROJECT SPECIFICATIONS
CONSULTANT : HILL-DAR 28/5/2020
MAIN CONTRACTOR : TAV CONSTRUCTION
MEP CONTRACTOR : MIDMAC WLL
Reason for Deviations ,
QCS STD. EQUIPMENT DETAILS- QCS STD. CONTRACT REQUIREMENT CETC Proposal
if any
SECTION 21 13 13 PROJECT SPECIFICATIONS

2.02 STEEL PIPES & FITTINGS

2.02 (J) Grooved-Joint, Steel-Pipe Appurtenances:

1 Pressure Rating 1200 kPa minimum. Complied

Galvanized and Uncoated, Grooved- ASTM A 47/A 47M, malleable-iron casting or ASTM A 536, ductile-iron ASTM A 536 DUCTILE
2 Complied
End Fittings for Steel Piping casting; with dimensions matching steel pipe. IRON

AWWA C606 and UL 213, rigid pattern, unless otherwise

Grooved-End-Pipe Couplings for AWWA C606 & UL
3 indicated, for steel-pipe dimensions. Include ferrous housing Complied
Steel Piping APPROVED
sections, EPDM-rubber gasket, and bolts and nuts.

SUPPLIER: City Electrical Trading & Contracting Doha, Qatar. Email: info@cetcqatar.com M/S. MIDMAC

NAME: DINESH CHAUDHARY NAME :

Signature: Signature :

Page 1 of 1
6. MATERIAL TEST REPORTS
7. QCDD APPROVAL
8. UL-FM APPROVALS
010213405 6789
 35

56789:;<=>?
@NBD@:DM
ABCCBDEFG@HIJJKLM@NDM@OP
QRSTUVWXXWY

ABCCBDEFG@HIJJKLM@NDM@OPNBD@:DM
U
ZTTU[T\T]R^U_\`W]YRXaW\U`W]UbaXXa\ScdU[]WWeTfUR\fUQ^Ra\Ug\f
U
h8i6jh8k@A6ii6hHl@kim gnopqr
ZUbUsWtuupUvRfwRxy]UzWRf
{R\a|y]dUZy^y]U}R^y~
WaY€RXW]TdU}\UouqrU_s‚_ƒ
}wTU`W^^W„a\SU`aXXa\ScUR]TUa\XT\fTfU`W]UycTU„aXwUsƒ}_…sƒ†Ub_}}_s[ZU†}‚U]y€€T]USRc~TXTfU`aXXa\Sct
HIJJKLM
‹NCLM
@ @ @ OILFFŒIL
‡JMLP iˆ‰L lBŠL@6D9 ‰FBEŽ @
ZX|^TUu rUfTS]TTUT^€W„ uu‘odUuu‘pdUpdUpu‘pd q
’dU’u‘pdUodUqdUdU“
ZX|^TUu rUfTS]TTUT^€W„ udUupdUu“ u”q
ZX|^TUu rUfTS]TTUT^€W„ ’•…‚–dUqtq•…‚–dUtq•…‚–dUuodUu ’
ZX|^TUuu oqUfTS]TTUT^€W„ uu‘odUuu‘pdUpdUpu‘pd q
’dU’u‘pdUodUqdUdU“
ZX|^TUuu oqUfTS]TTUT^€W„ udUup u”q
ZX|^TUuu oqUfTS]TTUT^€W„ ’•…‚–dUqtq•…‚–dUtq•…‚–dUuodUu ’
ZX|^TUuu }TT uu‘odUuu‘pdUpdUpu‘pd q
’dU’u‘pdUodUqdUdU“
ZX|^TUuu }TT udUupdUu“ u”q
ZX|^TUuu }TT ’•…‚–dUqtq•…‚–dUtq•…‚–dUuodUu ’
ZX|^TUuuu Vy^^wTRfU}TT uu‘p—uu‘p—pdUp—p—pu‘p ’
p—p—’dUpu‘p—pu‘p—’
p—p—odUpu‘p—pu‘p—o
’—’—odUo—o—
ZX|^TUuuq zTfy˜TfU}TTc “—“—pd ’
“—“—’dU“—“—odU“—“—
“—“—pu‘pdUp—p—udUp—p—uu‘od
p—p—uu‘pdUpu‘p—pu‘p—u
ZX|^TUuuq zTfy˜TfU}TTc pu‘p—uu‘p—uu‘pd ’
’…‚n’…‚nuu‘pd
!"#11$
%
&'1&$1(61'"1)7*+10,9-1!."
!'/'06789
 351&&!022223 014
010213405 6789
 35
56565789:;6;65789
57865786<9:=>?@<786=>?@<7865
ABCDE:??= FEGHIEG:JEEK =>?@<786=>?@<786;9 5LL
M>?@<786M>?@<786<9
M>?@<786M>?@<786<>?@<9
M>?@<786M>?@<7865789
M>?@<786M>?@<78659:M6M6=9
M>?@<786M>?@<786;9:M6M6=>?@<9
M>?@<786M>?@<786=>?@<789
?L6?L6MN=789:M>?@<786M>?@<786=
ABCDE:??= FEGHIEG:JEEK OPOP5789:O6O6=9 5LL
O6O6=>?@<789:?L6?L6O9
?L6?L6M9:?L6?L6=9
?L6?L6;9:?L6?L659
O6O6M>?@<9
?<6?<6;9:?<6?<6=9
?<6?<6M9:?<6?<6O
ABCDE:??= FEGHIEG:JEEK <>?@<:P:<>?@<P:<9:5:P:5:P:<9:5:P:5:P:<>?@<9:;:P:;:P:<9:;:P:;:P:<>?@<9:; =LL
P:;:P:59
=:P:=:P:<>?@<9:=:P:=:P:59:=:P:=:P:;9:M:P:M:P:<9:M:P:M:P:<>?@<9:M:P:M:P:59
M:P:M:P:;
ABCDE:?;L QRSIESBTUI <>?@<P<9:5P<9:5P<>?@<9 5LL
FEGHIETK ;P<9:;P<>?@<9:;P59
=P59:=P;9:MP<9:MP<>?@<9
MP59:MP;9:OP<>?@<9:OP59
OP;9:OPM
ABCDE:?;L QRSIESBTUI ?LP;9:?LPM9:?LPO9 ?V=
FEGHIETK ?<P;9:?<PM9:?<PO9:?<P?L
ABCDE:?=L QWX ?>?@;9:?>?@<9:<9:<>?@<9 =LL
59:5>?@<9:;9:=9:M9:O
ABCDE:?=L QWX ?L9:?< ?V=
ABCDE:?YL ZDWS[E:\GWXBRT <9:<>?@<9:59:;9:=9:M9:O ?V=
ABCDE:?LY FEGHIUS[:ZDWS[E MP;9:OP;9:OPM ?V=
\GWXBRT
ABCDE:?L= YL:GE[TEE ?>?@;9:?>?@<9:<9:<>?@<9 5LL
59:5]78^9:;9:=9:M9:MN=]78^9:O
ABCDE:?LM ;=:GE[TEE ?>?@;9:?>?@<9:<9:<>?@<9 5LL
59:5]78^9:;9:=9:M9:MN=]78^9:O
ABCDE:?LV JEE ?>?@;9:?>?@<9:<9:<>?@<9 5LL
59:5]78^9:;9:=9:M9:MN=]78^
ABCDE:?LV JEE O 5LL
ABCDE:?== QWX ?9:?>?@;9:?>?@<9 5LL
5]78^9:=N=]78^9:MN=]78^
!"#11$
%
&'1&$1(61'"1)7*+10,9-1!."
!'/'06789
 351&&!022223 314
010213405 6789
 35
6789:;<== >?@;ABC DE;DF<GDE;HE;IE;=E;J =KK
6789: LK;@:MN:: <F<GIE;<F<GDE;DE;DF<GDE HKK
<K=K
HE;IE;=E;JE;O
6789:;<IK AP?Q:?7NRQ;S:@TQ:NU DVDF<GDE;HWXYZVDE;HV<F<GIE HKK
HVHWXYZE;IVHWXYZE;JV=E;JF<GDWXYZVDE
J[=WXYZVHWXYZE;OVHWXYZE;OVJ[=WXYZ
6789:;<IK AP?Q:?7NRQ;S:@TQ:NU DV<F<GIEHXY\<F<GIE;HXY\<F<GDE HKK
=F<GDXY\IEJF<GDXY\HE;JF<GDXY\I
6789:;<IK AP?Q:?7NRQ;S:@TQ:NU JF<GDXY\=F<GDXYE;J\HXYE HKK
O\=E;<D\JF<GDXYE;J\=F<GDXYE;;
<K\HE;<K\=F<GDE
<K\=E;<K\JF<GDXY
6789: I=;@:MN:: <F<GIE;<F<GDE;DE;DF<GDE HKK
<KJK
HE;IE;=E;JE;O
<K]K ^:: <F<GIE;<F<GDE;DE;DF<GDE HKK
HE;IE;=E;JE;O
6789: ABC <F<GIE;<F<GDE;DE;DF<GDE HKK
<==K
HE;IE;=E;JE;O
_<K=FY LK;@:MN:: DE;DF<GDE;HE;I HKK
YNBR?;>9̀Pa
_<K=FY LK;@:MN:: J D=K
YNBR?;>9̀Pa
_<D] 67B?@CRC: IVIVDF<GDE;IVIVHWXYZ HKK
^::
_<D] 67B?@CRC: JVJVDF<GDE;JVJVHWXYZ D=K
^::
_<D] 67B?@CRC: OVOVDF<GDE;OVOVHWXYZ <]=
^::
<H= ANPUU DE;DF<GDE;HE;HWXYZE;IE;JE;J[=WXYZE;= HKK
<JK ABC <IE;<J HKK
<KD DDF<GD;Y:MN::;>9̀Pa <F<GIE;<F<GDE;DE;DF<GDE;HE;I HKK
<KD DDF<GD;Y:MN::;>9̀Pa =E;JF<GD;WXYZE;JE;O HKK
<KH <<F<GI;Y:MN::;>9̀Pa <F<GIE;<F<GDE;DE;DF<GDE;HE;I HKK
<KH <<F<GI;Y:MN::;>9̀Pa =E;JF<GD;WXYZE;JE;O HKK
<<=^_ ^bN:B@:@;S:@TQR?M;^:: DF<GD;V;DF<GD;V;<E;<F<GIE;<F<GDE;D HKK
H;V;H;V;<E;<F<GIE;<F<GDE;D
I;V;I;V;<E;<F<GIE;<F<GDE;D
<DK S:@TQR?M;^::;F;6bPN7 D;V;D;V;<F<GD HKK
SB@RTU
DF<GD;V;DF<GD;V;<F<GDE;D

!"#11$
%
&'1&$1(61'"1)7*+10,9-1!."
!'/'06789
 351&&!022223 415
010213405 6789
 35
56765676898:;<6;<6;98:;
=676=676898:;<6;<6;98:;<65
8;> ?@ABCDEF6G@@696HIJKL 5676567656OPQR 5>>
?MADBN
=676=67656OPQR
S676S676;<6;98:;<65<6=
T676T676;<6;98:;<656OPQR<65<6=<6S98:;6OPQR<6S
8=> GIK@MA@A6UJEC@ELKDC ;6768<6898:=<6898:; V>>
?@ABC@K
;98:;6768<6898:=<6898:;<6;
56768<6898:=<6898:;<6;
=6768<6898:;<6898:;<6;
S676898:=<6898:;<6;
8=> GIK@MA@A6UJEC@ELKDC 5676;98:;<66 5>>
?@ABC@K 56OPQR6768<6898:=<6898:;<6;
8=V WCC@ELKDC6?@ABC@K ;676898:=<6898:; 5>>
;98:;676;
5676898:=<6;<6;98:;
=676;<6;98:;<65
8=V WCC@ELKDC6?@ABC@K V676;<6;98:;<65<6= 5>>
S676;<6;98:;<65<6=<6V
T6765<6=<6V<6S
8=V WCC@ELKDC6?@ABC@K 8>6765<6=<6V<6S<6T 8XV
8;676=<6S<6T<68>
8=676S<6T<68><68;
8=VGY GIK@MA@A6WCC@ELKDC ;98:;676898:;<6; 5>>
?@ABC@K
5676898:;<6;
=676898:;<6;
Z[\\]^_
lmn^_
` ` ` o[^ppq[^
a\_^b cde^ fgh^`ijk repgst `
uv8>V w>6Q@FK@@ 8<6898:=<6898:;<6;<6;98:;<656PQ<65<6=98:=6PQ<6= =>>
WxyJz
uv8>V w>6Q@FK@@ V98:=6PQ<6V98:;6PQ<6V<6S98:=6PQ<6S98:;6PQ<6S<6T<68><68; 5>>
WxyJz
uv8>8 =V6Q@FK@@ 8<6898:=<6898:;<6;<6;98:;<656PQ<65<6=98:=6PQ<6= =>>
WxyJz
uv8>8 =V6Q@FK@@ V98:=6PQ<6V98:;6PQ<6V<6S98:=6PQ<6S98:;6PQ<6S<6T<68><68; 5>>
WxyJz
uv8>; ;;vV 8<6898:=<6898:;<6;<6;98:;<656PQ<65<6=98:=6PQ<6= =>>
WxyJz
uv8>; ;;vV V98:;6PQ<6V<6S98:=6PQ<6S98:;6PQ<6S<6T<68><68; 5>>
WxyJz
uv8>5 88v;V 8<6898:=<6898:;<6;<6;98:;<656PQ<65<6=98:=6PQ<6= =>>
WxyJz
uv8>5 88v;V V98:;6PQ<6V<6S98:=6PQ<6S98:;6PQ<6S<6T<68><68; 5>>
WxyJz
!"#11$
%
&'1&$1(61'"1)7*+10,9-1!."
!'/'06789
 351&&!022223 14
010213405 6789
 35
56789 :;; 7<=7>7?@<=7>7?A<=A<=A>7?A<=B=CD<=B<=@>7?@=CD<=@ @88
56789 :;; E>7?@=CD<=E>7?A=CD<=E<=F>7?@=CD<=F>7?A=CD<=F<=G<=78<=7A B88
567A8 H;IJKLMN B=CDOA<=BOB=CD<=EOA<=EOB=CD<=EOB<=GOB=CD<=GOB<=GOE ABA
:;;
567A8 H;IJKLMN AO7<=AO7>7?@<=AO7>7?A<=A>7?AO7<=A>7?AO7>7?@<=A>7?AO7>7?A<=A>7?AOA<=B=CDO7<=B=CDO7>7?@<=B @88
:;; CDO7>7?A<=BO7<=BO7>7?@<=BO7>7?A<=BOA<=BOA>7?A<=@O7<=@O7>7?@<=@O7>7?A<=@OA<=@OA>7?A<=@OB
CD<=@OB
567A8 H;IJKLMN E>7?A=CDO7<=E>7?A=CDO7>7?@<=E>7?A=CDO7>7?A<=E>7?A=CDOA<=E>7?A=CDOB=CD<=E>7?A=CDOB<=F> B88
:;; 7?A=CDO7<=F>7?A=CDO7>7?@<=F>7?A=CDO7>7?A<=F>7?A=CDOA<=F>7?A=CDOB=CD<=F>7?A=CDOB<=F>
7?A=CDO@<=FO7<=FO7>7?@<=FO7>7?A<=FOA<=FOB=CD<=FOB<=FO@<=GO@<=GOF>7?A=CD<=GOF<=78OF<=78OG<
7AO@<=7AOF<=7AOG<=7AO78
567A8 H;IJKLMN 7>7?@O7<=7>7?AO7<=7>7?AO7>7?@<=B=CDOA<=BOB=CD<=@OB=CD<=EO7<=EO7>7?@<=EO7>7?A<=EOA<=EOB ABA
: :;; CD
:PQ;RI;I
567A8 H;IJKLMN AO7<=AO7>7?@<=AO7>7?A<=B=CDO7<=B=CDO7>7?@<=B=CDO7>7?A<=BO7<=BO7>7?@<=BO7>7?A<=BOA<=@O7< B88
: :;; @O7>7?@<=@O7>7?A<=@OA<=@OB=CD<=@OB<=E>7?A=CDO7<=E>7?A=CDO7>7?@<=E>7?A=CDO7>7?A<=E>7?A
:PQ;RI;I CDOA<=E>7?A=CDOB=CD<=E>7?A=CDOB<=F>7?A=CDO7<=F>7?A=CDO7>7?@<=F>7?A=CDO7>7?A<=F>7?A
CDOA<=F>7?A=CDOB=CD<=F>7?A=CDOB<=F>7?A=CDO@<=FO7<=FO7>7?@<=FO7>7?A<=FOA<=FOB=CD<=FOB<
FO@
567A8 H;IJKLMN A>7?AO7<=A>7?AO7>7?@<=A>7?AO7>7?A<=A>7?AOA @88
: :;;
:PQ;RI;I
567BE SQTUU 7<=7>7?@<=7>7?A<=A<=A>7?A<=B=CD<=B<=@>7?@=CD<=@ @88
567BE SQTUU E>7?@=CD<=E>7?A=CD<=E<=F>7?@=CD<=F>7?A=CD<=F<=G<=78<=7A B88
567EE SRV 7<=7>7?@<=7>7?A<=A<=A>7?A<=B=CD<=B<=@>7?@=CD<=@ @88
567EE SRV E>7?@=CD<=E>7?A=CD<=E<=F>7?@=CD<=F>7?A=CD<=F<=G<=78<=7A B88
567@8 STMK;MWQLK 7>7?AO7>7?@<=BOB=CD<=EOA<=EOB=CD<=EO@<=F>7?A=CDOE<=GOE<=GOF>7?A=CD ABA
H;IJK;Q
XQTTY;I
CJWZ;W
567@8 STMK;MWQLK AO7<=AO7>7?@<=AO7>7?A<=A>7?AO7>7?@<=A>7?AO7>7?A<=A>7?AOA<=B=CDO7>7?@<=B=CDO7>7?A<=BO7> @88
H;IJK;Q 7?@<=BO7>7?A<=BOA<=BOA>7?A<=BOB=CD<=@O7>7?@<=@O7>7?A<=@OA<=@=O=A>7?A<=@OB=CD<=@OB
XQTTY;I
CJWZ;W
567@8 STMK;MWQLK E>7?A=CDO7>7?@<=E>7?A=CDO7>7?A<=E>7?A=CDOA<=E>7?A=CDOB=CD<=E>7?A=CDOB<=F>7?A=CDOA<=F> B88
H;IJK;Q 7?A=CDOB=CD<=F>7?A=CDOB<=F>7?A=CDO@<=FOA<=FOA>7?A<=FOB=CD<=FOB<=FO@<=GOA<=GOA>7?A<=GOB
XQTTY;I CD<=GOB<=GO@<=GOF<=78O@<=78OF<=78OG
CJWZ;W
567@8 STMK;MWQLK 7>7?AO7<=BOB=CD<=EO7<=EO7>7?@<=EOA<=EOB=CD ABA
:[ H;IJK;Q
:PQ;RI;I
CJWZ;W
567@8 STMK;MWQLK AO7<=AO7>7?@<=AO7>7?A<=B=CDO7<=B=CDO7>7?@<=B=CDO7>7?A<=B=CDOA<=BO7<=BO7>7?@<=BO7>7?A< B88
:[ H;IJK;Q BOA<=@O7<=@O7>7?@<=@O7>7?A<=@OA<=@OB=CD<=@OB<=E>7?A=CDO7<=E>7?A=CDO7>7?@<=E>7?A=CDO7>
:PQ;RI;I 7?A<=E>7?A=CDOA<=E>7?A=CDOB=CD<=E>7?A=CDOB<=F>7?A=CDO7<=F>7?A=CDO7>7?@<=F>7?A=CDO7>
CJWZ;W 7?A<=F>7?A=CDOA<=F>7?A=CDOB=CD<=F>7?A=CDOB<=F>7?A=CDO@<=FO7<=FO7>7?@<=FO7>7?A<=FOA<=FOB
CD<=FOB<=FO@<=GO7<=GO7>7?@<=GO7>7?A<=GOA<=GOB=CD<=GOB<=GO@
567@8 STMK;MWQLK A>7?AO7<=A>7?AO7>7?@<=A>7?AO7>7?A<=A>7?AOA @88
:[ H;IJK;Q
:PQ;RI;I
CJWZ;W
567@E \KK;MWQLK BOA<=BOA>7?A<=BOB=CD<=@OA<=@OA>7?A<=@OB=CD<=@OB @88
H;IJK;Q
567@E \KK;MWQLK E>7?A=CDOB=CD<=E>7?A=CDOB<=E>7?A=CDO@<=F>7?@=CDOA<=F>7?@=CDOB=CD<=F>7?@=CDOB<=F>7?@ B88
H;IJK;Q CDO@>7?@=CD<=F>7?@=CDO@<=F>7?A=CDOB=CD<=F>7?A=CDOB<=F>7?A=CDO@<=F>7?A=CDOE>7?A=CD<
FOB<=FO@<=FOE>7?A=CD<=GOB<=GO@<=GOE>7?A=CD<=GOF>7?A=CD<=GOF<=78OF>7?A=CD<=78OF<=78OG
567]8 [ZRMN; A<=A>7?A<=B=CD<=B<=@>7?@=CD<=@<=E>7?@=CD<=E>7?A=CD<=E<=F>7?@=CD<=F>7?A=CD<=F<=G<=78<=7A B88
^_ `IRVWTQ<
XQTTY;I
567]8 [ZRMN; A<=B=CD<=B<=@ B88
:[ `IRVWTQ<
:PQ;RI;I
!"#11$
%
&'1&$1(61'"1)7*+10,9-1!."
!'/'06789
 351&&!022223 14
010213405 6789
 35
56778 9:;<=>? 7E7FGH7F8IJ7E7FGHKFGIJ7E7FGH7IJ7E7F8H7F8IJ7E7F8HKFGIJ7E7F8H7IJ8H7F8IJ8HKFGIJ8H7IJ8E LMM
@ABCD 7F8H7F8IJ8E7F8HKFGIJ8E7F8H7
56KL 9:;<=>? 7E7F8IJ8 LMM
NO<<A>
56KLJP P>:QROST 7E7F8H7IJ8H7E7F8 LMM
9:;<=>?
NO<<A>
567LL U?;OSJV;< 8H7IJ8E7F8H7IJKH7IJGH7IJWH7 KMM
U
567XM YA;ST> 8IJ8E7F8IJKIJGIJLIJWIJZIJ7MIJ78 KMM
9:;<=>?
J
[?;:>\;?]J;S:FC?J[?;:>S;\>^J
_;`=Ja<:;=>:JCSJ8M7ZE77E7K
bQ>`=OCS`c d?OS=J=eÒJ<;T> [>?\`JCfJa`> d;T>J[C<
gJ8M7XJa_J__V
[e>J;<<>;?;SR>JCfJ;JRC\<;ShìJS;\>JC?J<?C:QR=JOSJ=eÒJ:;=;B;`>J:C>`JSC=JOSJO=`>AfJ;``Q?>J=e;=J<?C:QR=`J`CJO:>S=OfO>:Je;j>JB>>SJ\;SQf;R=Q?>:
QS:>?Ja_ìJYCAACDEa<Jk>?jOR>6JlSAhJ=eC`>J<?C:QR=`JB>;?OSTJ=e>Ja_Jm;?]J`eCQA:JB>JRCS`O:>?>:J=CJB>JV>?=OfO>:J;S:JRCj>?>:JQS:>?Ja_ìJYCAACDEa<
k>?jOR>6J9AD;h`JACC]JfC?J=e>Jm;?]JCSJ=e>J<?C:QR=6
a_J<>?\O=`J=e>J?><?C:QR=OCSJCfJ=e>J\;=>?O;AJRCS=;OS>:JOSJ=e>JlSAOS>JV>?=OfOR;=OCSJUO?>R=C?hJ`QBn>R=J=CJ=e>JfCAACDOSTJRCS:O=OCS`^J76J[e>JoQO:>
5SfC?\;=OCSIJ9``>\BAO>`IJVCS`=?QR=OCS`IJU>`OTS`IJkh`=>\`IJ;S:FC?JV>?=OfOR;=OCS`JpfOA>`qJ\Q`=JB>J<?>`>S=>:JOSJ=e>O?J>S=O?>=hJ;S:JOSJ;JSCSE\ÒA>;:OST
\;SS>?IJDO=eCQ=J;ShJ\;SO<QA;=OCSJCfJ=e>J:;=;JpC?J:?;DOST`q6J86J[e>J`=;=>\>S=JrP><?OS=>:Jf?C\J=e>JlSAOS>JV>?=OfOR;=OCS`JUO?>R=C?hJDO=eJ<>?\Ò`OCS
f?C\Ja_rJ\Q`=J;<<>;?J;:n;R>S=J=CJ=e>J>H=?;R=>:J\;=>?O;A6J5SJ;::O=OCSIJ=e>J?><?OS=>:J\;=>?O;AJ\Q`=JOSRAQ:>J;JRC<h?OTe=JSC=OR>JOSJ=e>JfCAACDOST
fC?\;=^JrgJ8M7XJa_J__Vr6

!"#11$
%
&'1&$1(61'"1)7*+10,9-1!."
!'/'06789
 351&&!022223 414
FITTINGS, RUBBER GASKETED | UL Product iQ Page 1 of 11

VIZM.EX4260 - FITTINGS, RUBBER GASKETED

Fittings, Rubber Gasketed

See General Information for Fittings, Rubber Gasketed

NATIONAL FITTINGS LTD EX4260

S F No.112 Madhapur Road
Kaniyur, Sulur Taluk
Coimbatore, Tn 641659 INDIA
Rated
Coupling Groove Pipe Pressure
Model Type Schedule Size In. (psig)

Coupling

Style 2 Rolled 10 2, 2-1/2, 3, 4, 6, 8 300

Style 2 Cut 40 2, 2-1/2, 3, 4, 6, 8 300

Style 5 Rolled, 40 1, 1-1/4, 1-1/2, 2, 2, 2-1/2, 3, 4, 5, 6, 8, 10, 12, 300

Cut 14, 16, 18

Style 5 Rolled 10 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 300

Style 5 Rolled 5 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 5 Rolled EL 1-1/4, 1-1/2, 2-1/2 300

Style 5 Rolled XL, SF 2-1/2, 3 300

Style 5 Rolled DF 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 300

Style 5 Rolled EL, G7, FL, SL, TL, 1-1/4, 1-1/2, 2 300
XL

Style 5 Rolled STF 1-1/2, 2, 2-1/2, 3 300

Style 5 Rolled TF 2-1/2, 3, 6 300

Style 5 Rolled EZF 3, 4, 6 300

Style 5 Rolled SF 4 300

Style 5 Rolled FLF 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 5 Rolled FLT 1, 1-1/4, 1-1/2, 2 300

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 2 of 11

Style 5 Rolled SPS 1-1/4, 2, 2-1/2, 3 175

Style 5 Rolled WLS 1, 1-/14, 1-1/2,2 175

Style 5 Rolled, 3.25 mm 1-1/4, 1-1/2 300

Cut

Style 5 Rolled, 3.65 mm 2 300

Cut

Style 5 Rolled, 4.05 mm 3 300

Cut

Style 5 Rolled, 4.50 4 300

Cut

Style 5 Cut BS1387 3.65mm 1 300

Style 5 Rolled BS1387 3.65mm 3 OD, 5.5 OD 300

Style 5 Rolled BS1387 5.4mm 3 OD, 5.5 OD 300

Style 5 Rolled BS1387 5.4mm 6.5 OD 300

Style 5 Rolled, 5.40 mm 8 300

Cut

Style 10 Rolled, 40 1-1/4, 1-1/2, 2, 2-1/2, 3 500

Cut

Style 10 Rolled, 40 4 400

Cut

Style 10 Rolled, 40 5, 6, 8 300

Cut

Style 10 Cut 40 10, 12 175

Style 10 Rolled 10 1-1/4, 1-1/2, 2, 2-1/2, 3 500

Style 10 Rolled 10 4 400

Style 10 Rolled 10 5, 6, 8 300

Style 10 Rolled EL 1-1/4, 1-1/2, 2-1/2 300

Style 10 Rolled DF 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 10 Rolled DT 1, 1-1/4, 1-1/2, 2 300

Style 10 Rolled TL, XL, SF, SL, EL 1-1/4, 1-1/2, 2 300

Style 10 Rolled XL, SF 2-1/2, 3 300

Style 10 Rolled EZF, SF, DF 4, 6 300

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 3 of 11

Style 10 Rolled FLF 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 10 Rolled FLT 1, 1-1/4, 1-1/2, 2 300

Style 10 Rolled BS1387 3.65mm 3 OD 300

Style 10 Cut BS1387 3.65mm 5.5 OD, 6.5 OD 300

Style 11 Rolled, 40 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6 500

Cut

Style 11 Rolled, 40 8 300

Cut

Style 11 Rolled 40 10 300

Style 11 Cut 40 12 300

Style 11 Rolled 10 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 500

Style 11 Rolled 10 5, 6, 8 300

Style 11 Rolled EL 1-1/4, 1-1/2, 2-1/2 300

Style 11 Rolled DF 1-1/4, 1-1/2, 2, 2-1/2, 3 175

Style 11 Rolled XL, SF, SL, TL, EL 1-1/4, 1-1/2, 2 300

Style 11 Rolled XL, SF 2-1/2, 3 300

Style 11 Rolled SF 4 300

Style 11 Rolled BS1387 3.65mm 3 OD 300

Style 11 Cut BS1387 5.4mm 6.5 OD 300

Style 12 Rolled, 40 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 300

Cut

Style 12 Rolled 40 18 300

Style 12 Rolled 10 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 300

Style 12 Rolled EL 1-1/4, 1-1/2, 2-1/2 300

Style 12 Rolled 5, WLS 1-/14, 1-1/2, 2 175

Style 12 Rolled STF 1-1/2, 2, 2-1/2, 3 300

Style 12 Rolled TF 2-1/2, 3, 6 300

Style 12 Rolled EZF 3, 4, 6 300

Style 12 Rolled DF, 5 1 300

Style 12 Rolled WLS 1 175

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 4 of 11

Style 12 Rolled XL, SF, DF, SL, TL, 1-1/4, 1-1/2, 2 300
G7, EL

Style 12 Rolled XL, SF 2-1/2, 3, 4 300

Style 12 Rolled DF 2-1/2, 3, 4 300

Style 12 Rolled DF 6 175

Style 12 Rolled FLF 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 12 Rolled FLT 1, 1-1/4, 1-1/2, 2 300

Style 12 Rolled EF 1-1/2, 2, 2-1/2, 3, 4 175

Style 12 Rolled EF 1-1/2, 2, 2-1/2, 3, 4 175

Style 12 Rolled 5 1-1/4, 1-1/2, 2 175

Style 12 Rolled, 3.25 mm 1-1/4, 1-1/2 300

Cut

Style 12 Rolled, 3.65 mm 2 300

Cut

Style 12 Rolled, 4.05 mm 3 300

Cut

Style 12 Rolled, 4.50 4 300

Cut

Style 12 Rolled, 5.4 mm 8 175

Cut

Style 12 Cut BS1387, 3.65mm 1 300

Style 12 Cut BS1387, 5.4 mm 5.5 OD 300

Style 12 Rolled, 0.144 in. 3 (0.D) 300

Cut

Style 12 Rolled, 0.192 in. 6.5 (0.D) 300

Cut

Style 12 Rolled, 40 2x1-1/2, 2-1/2x1-1/2, 2-1/2x2, 3x2, 3x2-1/2, 300

Cut 4x2, 4x2-1/2, 4x3

Style 25 Rolled, 40 2-1/2 x 2, 3 x 2, 3 x 2-1/2, 4 x 2, 4 x 2-1/2, 4 x 500

Cut 3, 6 x 4

Style 25 Rolled, 40 8x6 175

Cut

Style 25 Cut 40 8x6.5 OD 175

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 5 of 11

Style 25 Rolled 10 2x1-1/2, 2-1/2x1-1-2, 2-1/2x2, 3x2, 3x2-1/2, 300

3ODX2, 4x2, 4x2-1/2, 4x3

Style 25 Rolled 10 6x4 250

Style 25 Rolled 10 8x6 175

Style 25 Rolled XL, SF, TL, SL, DF, 2x1-1/2 300

EL

Style 25 Rolled XL, SF, DF 2-1/2x2, 3x2 300

Style 25 Rolled SF, DF 3x2-1/2,4x2, 4x2-1/2,4x3 300

Style 25 Rolled, 4.05 mm 3x2-1/2 300

Cut

Style 25 Rolled, 4.50 mm 4x2, 4x2-1/2,4x3 300

Cut

Style 25 Rolled, 3.25mm, 3.65mm, 2x1-1/2, 2-1/2x1-1/2, 2-1/2x2, 3x2 300

Cut 4.05mm

Style 25 Cut 3.65mm 4x3OD 300

Style 25 Rolled, 4.50mm 6(6.50 O.D)x4 250

Cut

Flange Adapter

Style 14 Rolled, 40 2, 2-1/2, 3, 4, 6, 8 300

Cut

Style 14 Rolled 10 2, 2-1/2, 3, 4, 6, 8 300

Style 14 Rolled TL 2 300

Style 14 Cut BS1387, 5.4mm 6.5 OD 300

Style 14 Rolled BS1387, 3.65mm 3 OD 300

Style Cut 40 2, 4, 6, 8, 10, 12 300

14PN

Style Rolled 10 2-1/2 300

14PN

Style Cut BS1387, 4.05mm 3, 6.5 OD 300

14PN

Style Cut BS1387, 5.4mm 3, 5-1/2, 6.5 OD 300

14PN

Style Rolled BS1387, 3.65mm 3 OD 300

14PN

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 6 of 11

Side Outlets

Rated
Outlet Pressure
Model type Pipe Size (in.) (psig)

Style Threaded 40 3 x 1/2, 3/4, 1; 4 x 1/2, 3/4, 1 300

13-U

Style Threaded XL, DF, 5, 10 1-1/4 x 1/2, 3/4, 1; 1-1/2 x 1/2, 3/4, 1; 2 x 1/2, 300
13-U 3/4, 1; 2-1/2 x 1/2, 3/4, 1

Style Threaded EL 1-1/4 x 1/2, 3/4, 1; 1-1/2 x 1/2, 3/4, 1; 2 x 1/2, 300
13-U 3/4, 1

Style Threaded BS1387, 3.65mm 3 OD x 1/2, 3/4, 1 300

13-U

Style Grooved 10 2 x 1-1/4, 1-1/2; 300

15G 3 x 1-1/4, 1-1/2, 2;
4 x 1-1/4, 1-1/2, 2, 2-1/2, 3;
5 x 1-1/4, 1-1/2, 2, 2-1/2, 3;
6 x 1-1/4;
6-1/2OD x 2, 2-1/2, 3;
8 x 2, 2-1/2, 3, 4

Style Grooved 40 2 x 1-1/4, 1-1/2; 300

15G 3 x 1-1/4, 1-1/2;
4 x 1-1/4, 1-1/2;
5 x 1-1/4, 1-1/2;
6 x 1-1/4;
8 x 2, 2-1/2, 3, 4

Style Grooved 40 3 x 2, 4 x 2, 2-1/2, 3; 500

15G 5 x 2, 2-1/2, 3;
6 x 2, 2-1/2, 3, 4

Style Grooved SF, XL, DF 3 x 1-1/2, 2 300

15G

Style Grooved SF, DF 4 x 1-1/2, 2, 2-1/2, 3 300

15G

Style Grooved BS1387, 3.65mm 2 x 1-1/4, 1-1/2 300

15G

Style Grooved BS1387, 3.65mm 3 x 1-1/4, 4 x 1-1/4, 5 x 1-1/4 300

15G

Style Grooved BS1387, 4.05mm, 3 x 1-1/4, 4 x 1-1/4, 6 x 1-1/4 300

15G 4.5mm

Style Grooved BS1387, 3.65mm 6.5 OD x 1-1/4, 6.5 OD x 1-1/2 300

15G

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 7 of 11

Style Grooved BS1387, 4.5mm 6.5 OD x 3 OD 300

15G

Style Grooved BS1387, 4.5mm 8 x 3 OD 300

15G

Style Grooved 4.05mm 3 x 1-1/2, 2 300

15G

Style Grooved 4.50mm 4 x 1-1/2, 2, 2-1/2, 3 300

15G

Style Grooved 4.85mm 6 x 1-1/2, 2, 2-1/2, 3, 4 300

15G

Style 16 Threaded 10 2 x 1/2, 3/4, 1, 1-1/2; 300

2-1/2 x 1/2, 3/4, 1, 1-1/4, 1-1/2;
3 x 1/2, 3/4, 1, 1-1/4, 1-1/2;
4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3;
6 x 1, 1-1/2, 2, 2-1/2, 3, 4

Style 16 Threaded 40 2 x 1/2, 3/4; 300

2-1/2 x 1/2, 3/4;
3 x 1/2, 3/4;
4 x 1/2, 3/4, 2-1/2, 3;
5 x 2-1/2, 3;
6 x 2-1/2, 3, 4;
6.5 OD x 1-1/2, 2, 2-1/2, 3, 2, 3OD, 4;
8 x 2, 2-1/2, 3, 4

Style 16 Threaded 40 2 x 1, 1-1/4, 1-1/2; 500

2-1/2 x 1, 1-1/4, 1-1/2;
3 x 1, 1-1/4, 1-1/2, 2;
4 x 1, 1-1/4, 1-1/2, 2;
5 x 1-1/4, 1-1/2, 2;
6 x 1, 1-1/4, 1-1/2, 2

Style 16 Threaded XL, SF, DF TL, SL, 2 x 1/2, 3/4, 1, 1-1/2 300
DF, EL

Style 16 Threaded XL, SF, DF 2-1/2 x 1/2, 3/4, 1, 1-1/4, 1-1/2 300

Style 16 Threaded XL, SF, DF 3 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 300

Style 16 Threaded SF, DF 4 x 1/2, 3/4, 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 16 Threaded EZF 4x2 300

Style 16 Threaded 3.65 2 x 1/2, 3/4, 1, 1-1/2 300

Style 16 Threaded 4.05mm 3 x 1/2, 3/4, 1, 1-1/4, 1-1/2 300

Style 16 Threaded 4.50mm 4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 16 Threaded 3.65mm 2-1/2 x 1/2, 3/4, 1-1/4, 1-1/2 300

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 8 of 11

Style 16 Threaded 4.50mm 4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 300

Style 16 Threaded 4.85mm 6 x 1-1/2, 2, 2-1/2, 3, 4 300

Style 16 Threaded 5.40mm 8 x 2, 2-1/2, 3, 4 300

Style 16 Threaded 0.144mm 3 OD x 1, 1-1/4, 1-1/2 300

Style 16 Threaded BS1387, 3.65mm 6 x 3 OD 300

Style 16 Threaded BS1387, 4.05mm 6.5 OD x 1-1/4, 1-1/2 300

Style 16 Threaded BS1387, 4.05mm 8 x 3 OD 300

Style Threaded 40 2-1/2 x 1/2, 3/4, 1, 1-1/2; 3 x 1/2, 3/4, 1, 1-1/2; 300
16A 4 x /2, 3/4, 1, 1-1/2

Style Threaded 40 3x2 300

16A

Coupling

Rated Pressure
Model Groove Type Pipe Size (in.) (psig)

I.5 Rolled T3091 1, 1-1/4, 1-1/2, 2, 3 OD, 3, 4 400

I.5 Rolled T3091 5-1/2 OD, 6, 8 / 6 mm, 10 / 8 mm, 12 / 8 mm 300

I.5 Rolled T3091-1993 6-1/2 OD 300

I.5 Rolled T17395 2-1/2 / 4 mm, 4-1/4 OD / 4.5 mm 400

I.5 Rolled T17395 5-1/4 OD / 5 mm, 5 / 4 mm, 6-1/4 OD / 6 mm 300

Flexible Coupling

Rated Pressure
Model Groove Type Pipe Size (in.) (psig)

I.11 Rolled T3091 1, 1-1/4, 1-1/2, 2, 3 OD, 3, 4 400

I.11 Rolled T3091 5-1/2 OD, 6, 8 / 6 mm, 10 / 8 mm, 12 / 8 mm 300

I.11 Rolled T3091-1993 6-1/2 OD 300

I.11 Rolled T17395 2-1/2 / 4 mm, 4-1/4 OD / 4.5 mm 400

I.11 Rolled T17395 5-1/4 OD / 5 mm, 5 / 4 mm, 6-1/4 OD / 6 mm 300

I.12 Rolled 10 2, 3, 4, 6 500

I.12 Rolled 10 8 400

I.12 Cut 40 2, 3, 4, 6 500

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 9 of 11

I.12 Cut 40 8, 10, 12 400

Reducing Coupling

Rated
Groove Pressure
Model Type Pipe Size (in.) (psig)

I.25 Rolled T3091 2x1-1/2, 3 ODx1-1/2, 3 ODx2, 3x1-1/2, 3x2, 3x3 OD, 300
4x1-1/2, 4x2, 4x3 OD, 4x3, 6x3, 6x4, 8 / 6 mm x6

I.25 Rolled T17395xT3091 2-1/2 / 4 mm x1-1/2, 2-1/2 / 4 mm x2 300

I.25 Rolled T3091xT17395 3x2-1/2 / 4 mm, 4x2-1/2 / 4 mm 300

Flange Adaptor

Rated
Groove Pressure
Model Type Pipe Size (in.) (psig)

I.14 Rolled T3091 2, 3 OD, 3, 4, 5-1/2 OD, 6, 8 / 6 mm 300

PN

I.14 Rolled T3091- 6-1/2 OD 300

PN 1993

I.14 Rolled T17395 2-1/2 / 4 mm, 4-1/4 OD / 4.5 mm, 5-1/4 OD / 5 mm, 5 / 300
PN 4 mm, 6-1/4 / 6 mm

I.14 Rolled 10, 40 2, 2-1/2, 3, 4, 5, 6, 8 300

Side Outlet

Rated
Groove Pressure
Model Type Pipe Size (in.) (psig)

I.15 Rolled T3091 2x1, 2x1-1/4, 2x1-1/2, 3 ODx1, 3 ODx1-1/4, 3 ODx1-1/2, 3x1, 300
3x1-1/4, 3x1-1/2, 3x2, 4x1, 4x1-1/4, 4x1-1/2, 4x2

I.15 Rolled T3091 5-1/2 ODx1, 5-1/2 ODx1-1/4, 5-1/2 ODx1-1/2, 5-1/2 ODx2, 5-1/2 300
ODx3 OD, 6-1/2 ODx1, 6-1/2 ODx1-1/4, 6-1/2 ODx1-1/2, 6-1/2
ODx2, 6-1/2 ODx3 OD, 6-1/2 ODx3, 6x1, 6x1-1/4, 6x1-1/2, 6x2,
6x3 OD, 6x3, 8 / 6 mm x1, 8 / 6 mm x1-1/4, 8 / 6 mm x1-1/2, 8 /
6 mm x2, 8 / 6 mm x3 OD, 8 / 6 mm x3, 8 / 6 mm x4

I.16 Threaded T3091 1-1/2x1, 3 ODx2, 5x1, 5x1-1/4, 5x1-1/2, 5x2 232

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 10 of 11

I.16 Threaded T3091 2x1, 2x1-1/4, 2x1-1/2, 3 ODx1, 3 ODx1-1/4, 3 ODx1-1/2, 3x1, 300
3x1-1/4, 3x1-1/2, 3x2, 4x1, 4x1-1/4, 4x1-1/2, 4x2, 5-1/2 ODx1,
5-1/2 ODx1-1/4, 5-1/2 ODx1-1/2, 5-1/2 ODx2, 5-1/2 ODx3 OD,
6-1/2 ODx1, 6-1/2 ODx1-1/4, 6-1/2 ODx1-1/2, 6-1/2 ODx2, 6-1/2
ODx3 OD, 6-1/2 ODx3, 6x1, 6x1-1/4, 6x1-1/2, 6x2, 6x3 OD, 6x3,
8 / 6 mm x1, 8 / 6 mm x1-1/4, 8 / 6 mm x1-1/2, 8 / 6 mm x2, 8 /
6 mm x3 OD, 8 / 6 mm x3, 8 / 6 mm x4

I.13 Threaded T3091 1x1/2, 1x3/4, 1-1/4x1/2, 1-1/4x3/4, 1-1/4x1, 1-1/2x1/2, 300
1-1/2x3/4, 1-1/2x1, 2x1/2, 2x3/4, 2x1, 3 ODx1/2, 3 ODx3/4, 3
ODx1

I.13 Threaded T17395 2-1/2 / 4 mm x1/2, 2-1/2 / 4 mm x3/4, 2-1/2 / 4 mm x1 300

Models I.16 with 2 in. and larger main run size and 1 in. nominal outlets are intended for direct connection to sprinklers.

Models I.13 in the 1/2, 3/4, 1 in. nominal outlets are intended for direct connection to sprinklers.

Models I.15, I.16, I.13 in the 1 in. and larger nominal outlet sizes are intended for connection to system piping.

Note:

10 refers to Schedule 10 steel pipe in accordance with NFPA 13.

40 refers to Schedule 40 steel pipe in accordance with NFPA 13.

T3091 refers to GB/T3091-2001 ordinary steel pipe.

T3091-1993 refers to GB/T3091-1993 ordinary steel pipe.

T17395 refers to GB/T17395-1998 steel ordinary pipe.

6-1/2 OD pipe is GB/T3091-1993 pipe, 2-1/2", 4-1/4 OD, 5-1/4 OD, 5" and 6-1/4 OD pipes are GB/T17395-1998 pipes, the
rest pipes are GB/T3091-2001 pipes.

Models 16 and 16A in the 1/2, 3/4, and 1 in. nominal outlet sizes are intended for direct connection to sprinklers.

Models 13U in 1/2 and 3/4 in. nominal outlet sizes are intended for direct connection to sprinklers.

Models 13U in the 2, 2-1/2, 3, 4, and 3 OD x 1 in. nominal outlet sizes are intended for direct connection to sprinklers.

Models 16, 16A, 15G and 13U in the 1 in. and larger nominal outlet sizes are intended for connection to system piping.

Styles 5, 10, 11, 12, 15G, and 16 rubber gasketed fittings are suitable for use in dry pipe systems for temperatures to -40°F
(-40°C).

Styles 5, 10, 11 and 12 are suitable for use with flush seal gaskets.

40 refers to Schedule 40 steel pipe

10 refers to Schedule 10 steel pipe

5 refers to Listed Schedule 5 steel pipe

DF refers to Listed DYNA-FLOW steel pipe manufactured by Allied Tube & Conduit Corp

DT or CT refers to Listed DYNA-Thread and Central Thread steel pipe manufactured by Allied Tube & Conduit Corp

EF refers to Listed EDDY FLOW steel pipe manufactured by Bull Moose Tube Co

EL refers to Listed EDDYLITE steel pipe manufactured by Bull Moose Tube Co

EZF refers to Listed EZ-Flow steel pipe manufactured by Northwest Pipe Co

FLF refers to Listed Fire-Line Flow steel pipe manufactured by Western International Forest Products Inc

FLT refers to Listed Fire-Line Threadable steel pipe manufactured by Western International Forest Products Inc

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
FITTINGS, RUBBER GASKETED | UL Product iQ Page 11 of 11

G7 or GF refers to Listed GAL 7 and GAL-FLO steel pipe manufactured by Idod Systems L C

SF refers to Listed Super-Flo steel pipe manufactured by Allied Tube & Conduit Corp

SL refers to Listed SL steel pipe manufactured by Wheatland Tube Co

STF refers to Listed Steady Flow steel pipe manufactured by AMS Tube Corp

SPS refers to Listed SPS Flow steel pipe manufactured by Yieh Phui Enterprise Co Ltd

SuXL, Su40 refers to Listed Super XL, Super 40 steel pipe manufactured by Allied Tube & Conduit Corp

TF refers to Listed Tex-Flow steel pipe manufactured by Tex-Tube Co

TL refers to Listed TL steel pipe manufactured by Allied Tube & Conduit Corp

WLS refers to Listed WLS steel pipe manufactured by Wheatland Tube Co

XL or XL-II refers to Listed XL and XL-II steel pipe manufactured by Allied Tube & Conduit Corp

The 3.25, 3.65, 4.05, 4.50, 5.40 mm refer to pipe wall thickness as specified in the British Standard for steel tubes, BS1387,
BS3601 respectively

Trademark and/or Tradename:

Last Updated on 2019-03-06

The appearance of a company's name or product in this database does not in itself assure that products so identified have
been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions:
1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in
their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement
"Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material.
In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC"

https://iq.ulprospector.com/en/profile?e=159895 3/15/2019
9. PREVIOUS APPROVALS
SUPPLIER: PIPELINE SUPPLIES & SERVICES CO WLL.
ET[5å, Doha Metro - Red Line North Underground
Lot 1.4 and Lot 1.5
4;>
Hed Lrn€ North Underground

Material Submittal Sheet MSS

Contr. No. RTC/038/2012 MSS No. M00l rsc MEP MAR 10095

From: ISG JV Qatar Rail Rev.: 1

Subject GROOVED FITTINGS FOR CHILLED WATER IN STATIONS BY MIS BECON TRADING
wBs RNST wBs NIA Lot No. 't.4 & 1.5
wBs M001

be aftached to this

Products: Grooved Fittings for Chilled Water

Supplier: BECON Trading
Manufacturer: National Fittings Limited
RAM Targefi Failure Rate: NA MART*: NA RAltl Code: NA
* Mean Active Repah Time (MARq îs the lime to repair the assof on6e the ma¡ntaíner is on s¡te includ¡ng lailure diagnosis,
removing covers, repair of asæt, reptac¡ng covers, test¡ng and reslart¡ng the asset back inlo seruice. lt refers 1o the average
correctiie action repair time of a unit aI its asset locat¡on. The measure is ôased on the time taken to d¡agnose the fault and
restoreing the asset back into a serviceable condiction'

Attachments: Discipline(s) MEP Stat¡ons

1. BECON Company Profile

2. ManufacturersCompany
Specific.
Volume 7, Com¡che & Al Qassar Technicel
Profile & Catalogue SÞeclfi câtion, VAC System

3. Country of Origin
4, List of Materials &
M001 -rsG-MHV-SPE-76633 /
Technical Data Sheet
tÞvg. Ref. M001 -tsG-MHV-SPE-76793
5. Compliance Statement W 6. Test Certif¡cate & ISO Sectlon
,l0,
Chilled Water Pipework
Proiect Soecification Cert¡ficate
7. Quality Management L Authority Approvals
Svstem QCS 2010, Section 22, Part 5, Chilled Water Pipework
9. Project Reference

Requester
--Z --
Frlñcesca
10.

ProJect Hílio
MEP Design
/v'
ConJáctor's Author¡sed Date:
NamelPoslt¡on: Ëerrari Manaoer Mariani Manaoer Siqnatory:
(Urgent as noted below subject to Engineer's agreement) Barry Crouchman 9-Oct-2016
Urgenl v Normal Copies to: Aconex Eng. M. PM Subcontr
Material is included ¡n the List Materlals by:
Sample(s) is {are} provided herew¡th: Yes/No Description:

For Designe/s Use Date Received: Reviewed by:

RESPONSE:

Attachments: Reference Documents:

1

2.

For DVE'S Use Date Received: Reviewed by:

RESPONSE:

Please flnd enclosed DVE repl¡es.

Attachments: Reference Documents:

1
2.

For Eng¡neer's U9e Date Rôceived: Revlewed by:

RESPONSE:

Atlachmentsi Reference Documents:

1

2.

llPage
10. AUTHORIZATION LETTER
 - NATIONAL FITTINGS LIMITED
■ """""'
t i)
(Formerly Interfit Techno Products Limited)
NATIONALM CIN : L29199TZ1993P.LC008034

Date: 15.1.2020

To
CITY ELECTRICAL ( SUB : BCMS LEBANON)

Po.Box-82535
Doha, Qatar

Sir,
R
We hereby confirm that CITY ELECTRICAL TRADING & CONTRACTING
WLL , PO.BOX-82535, Doha, Qatar is an authorised distributor of
"National" brand of grooved couplings and fittings manufactured by us
under UL listing & FM approvals.

Yours Sincerely

For National Fittings Limited

A. V. Palaniswamy
Managing Director

112, Madhapur Road, Kaniyur, Karumathampatti(Via), Coimbatore - 641 659, Tamilnadu, India.
. Phone: 99432 93000, 99439 93001 Fax: 0421 - 2333317
TIN No. 3368188127S, CST No. 629030, Dt. 07.02.94
11. COUNTRY OF ORIGIN
12. DRAFT WARRANTY
Ref :- CETC/BARWA / WC / 2020 /526 26/05/2020

WARRANTY CERTIFICATE

TO.
MIDMAC WLL
Subject : Warranty Certificate for Grooved Fittings – NATIONAL INDIA.

Project Name : Passenger Terminal Expansion Works

- Central Concourse Building and Early Works (HIAEP-0013)

Consultant : HILL-DAR

MAIN Contractor : TAV Construction

MEP Contractor : MIDMAC WLL

We City Electrical Trading And Contracting WLL(CETC) , the authorized supplier for
NATIONAL-INDIA fittings, hereby to declare it Certified, that the materials dispatched to
you conform to the quality as per the specifications specified in our Technical Data Sheet
and are guaranty/warranty for 1 years from the date of commissioning.

Thanks & Best Regards

Dinesh Chaudhary

(Electrical Engineer)