UPGRADE SERIES CORED ELEMENT
UPGRADE SERIES™ technology was developed to address the
inherent deficiencies of the conventional separators, making it ABOUT US
possible to effectively remove particulate from fluid streams. The
media technology employed is specifically designed to provide the Pentair designs and
desired level of separation, combining chemical compatibility, manufactures advanced
strength, robust performance and cost-effective properties. technologies for the high
performance separation of
The UPGRADE SERIES elements are designed to fit directly into solids, liquids and gases. These
existing separator vessels. The UPGRADE SERIES elements are technologies are used to help
facilitate balanced systems
designed to offer exceptional economic value while assuring superior
that are highly stable, reliable
efficiency. Each element provides maximum separation efficiencies,
and robust, thereby increasing
high integrity, system compatibility, long life and cost effectiveness.
throughput, reducing
UPGRADE SERIES elements were designed to effectively separate operating cost and minimizing
contaminants from process streams therefore are in service waste. The company's
technologies help solve the
protecting critical equipment and high-value systems worldwide.
most critical separation and
extraction issues for the gas,
The element performance is essentially independent of system
refining, chemical and power
pressure and UPGRADE SERIES elements have been used in
generation industries.
particulate removal applications around the world.
Operation above 30 psid (206.8 kPa) is not recommended.
PENTAIR • 4301 West Davis, Conroe, Texas 77304 • Phone (936) 788-1000 • Fax (866) 539-9032 • www.pentairseparations.com
The enclosed information is the property of PENTAIR Ltd. and is furnished in confidence solely for the purpose of evaluating PENTAIR Ltd. technology.
It is not to be copied, communicated or distributed without the expressed written consent of PENTAIR Ltd.
UPGRADE SERIES CORED ELEMENT
FE37390DOGEH
Element Type UPGRADE SERIES cored filter element
Separation Media Proprietary NEXCEL® media formulation comprised of natural
polymeric fibers cross-linked into a Locked Pore Structure™
specifically designed to separate particulate from high flow liquid
(aqueous or hydrocarbon) streams.
Particulate Removal β10 = 5000 (99.98% efficiency @ 10µm)
End Caps Corrosion resistant carbon steel
Center Core Corrosion resistant carbon steel
Seal EPDM
Other Components Proprietary high temperature adhesive
Configuration Single Open End (SOE)
Flow Direction Outside-In
Dimensions Nominal Length: 39” (99cm)
Nominal O. D.: 3.75” (9.5cm)
Ratings Recommended change out 25-30 PSID (172.4-206.8 kPa) based on process limits.
Maximum Operating Temperature is 250 °F. (121.1 C)
Nexcel® Media
PENTAIR • 4301 West Davis, Conroe, Texas 77304 • Phone (936) 788-1000 • Fax (866) 539-9032 • www.pentairseparations.com
The enclosed information is the property of PENTAIR Ltd. and is furnished in confidence solely for the purpose of evaluating PENTAIR Ltd. technology.
It is not to be copied, communicated or distributed without the expressed written consent of PENTAIR Ltd.
