MA5608T>?
---------------------------------------------
Command of user Mode:
---------------------------------------------
bandwidth Modify bandwidth
cls Clear screen
display Display information
echo Echo
enable Turn on privileged EXEC mode commands
help Description of the interactive help system
history-command Enable and control the command history function
idle-timeout Set the interval of terminal timeout
interactive Enable or disable command execute confirm function
mmi-mode Activating the machine-machine mode
quit Exit from current mode and enter prior mode
scroll Set auto or manual scroll function
smart Enable or disable smart function
stelnet Establish an Stelnet connection
super Modify super password parameters
switch Switch language mode
telnet Open a telnet connection
terminal Operation of config terminal
undo Negate a command or set its defaults
------------------------------------------------------
MA5608T>enable
MA5608T#?
---------------------------------------------
Command of privilege Mode:
---------------------------------------------
active Enable configuration
alarm <Group> alarm command group
alarm-event Alarm and event
autosave <Group> autosave command group
backup <Group> backup command group
baudrate Set serial baudrate
clear <Group> clear command group
client Users information
config Configuration from terminal
debugging <Group> debugging command group
dhcp DHCP
diagnose Change into diagnose mode
disable Turn off privileged mode commands
display Display information
duplicate <Group> duplicate command group
erase Erase command
event <Group> event command group
file File system command word
file-server File server information
ftp FTP user and password configuration
infoswitch Set output switch of information terminal
load <Group> load command group
local-user Local-user
loghost Log server configuration operation
mpls MPLS parameters
patch Patch operation
ping <Group> ping command group
pppoe PPPoE
quit Exit from current mode and enter prior mode
reboot Reboot system,active board or standby board
refresh Do soft reset
reset <Group> reset command group
resource System resources(mem,message,cpu)
rollback System rollback command
save The command of saving immediately
serial-mode Set access-mode: console/CQT/112/SPL
set Set the operative time of undo rollback function
ssh Specify SSH (secure shell) configuration information
super Modify super password parameters
syslog <Group> syslog command group
sysman Configuration of the management channel
sysname Set system network name
system <Group> system command group
terminal <Group> terminal command group
time <Group> time command group
timezone Set time zone
tracert <Group> tracert command group
trap <Group> trap command group
trap-sync Set trap synchronization switch
undo Negate a command or set its defaults
vlan VLAN
---------------------------------------------
Command of user Mode:
---------------------------------------------
bandwidth Modify bandwidth
cls Clear screen
display Display information
echo Echo
help Description of the interactive help system
history-command Enable and control the command history function
idle-timeout Set the interval of terminal timeout
interactive Enable or disable command execute confirm function
mmi-mode Activating the machine-machine mode
quit Exit from current mode and enter prior mode
scroll Set auto or manual scroll function
smart Enable or disable smart function
stelnet Establish an Stelnet connection
super Modify super password parameters
switch Switch language mode
telnet Open a telnet connection
terminal Operation of config terminal
undo Negate a command or set its defaults
------------------------------------------------------
MA5608T#config
MA5608T(config)#?
---------------------------------------------
Command of config Mode:
---------------------------------------------
aaa AAA(Authentication,Authorization,Accounting) view
acl <Group> acl command group
active Activate state of the bonding group
adsl <Group> adsl command group
ancp ANCP configuration command
ancp-alike ANCP-alike
anti-rogueont Anti rogue ONT
arp <Group> arp command group
arp-detect Arp Detect
as-notation The AS notation
auto-backup Auto backup
auto-vccv Config the auto vccv
autounloop Automatic unloop
bfd Specify BFD(Bidirectional Forwarding Detection)
configuration information
bgp Border Gateway Protocol(BGP)
bind <Group> bind command group
bit-error-define PRA Bit Threshold parameters
board <Group> board command group
bonding-group Bonding group
bpdu BPDU
bra-alarm-threshold BRA Alarm Threshold parameters
bra-degrade-threshold BRA Degrade Threshold parameters
bra-error-define BRA Define Threshold parameters
braport Enter braport command mode
btv Broadband TV
build-configuration Configuration file build mode
bulk-stat Set the bulk statistic module
car-group Car-Group
car-threshold Priority CAR threshold
cesop <Group> cesop command group
cesop-connect CESoP connect
cfm Continuity Fault Management
classification <Group> classification command group
clear <Group> clear command group
clip Clip parameters configuration
clock <Group> clock command group
command <Group> command command group
config System config
cos-group-table CoS-group table
cos-queue-map 802.1p priority and queue map
cos-queue-map-profile Cos queue map profile
cos-remark Set CoS remark
cpe-management <Group> cpe-management command group
cpu-overload-control Set bucket parameters
dba-profile <Group>DBA profile configuration command group
deactive Deactivate state of the bonding group
debugging <Group> debugging command group
default Configure default MAC pool
default-policy Configure default policy
defaultvlan Configure default VLAN type
dhcp <Group> dhcp command group
dhcp-option82 DHCP-option82
dhcp-server Add DHCP server IP addresses
dhcpv6 DHCPv6 command group
dhcpv6-option DHCPv6-option permit-forwarding
dhcpv6-server Add DHCPv6 server IPv6 addresses
dns Specify domain name system
dot1x 802.1X
double-tag Double tag
dpbo-esel DPBO-ESEL
dpoe DPOE
dscp-to-pbits DSCP mapping table
dsp DSP attributer configure
dsp-para-template DSP parameters template configuration
dtmf DTMF parameter configure
e1-degrade-threshold PRA Degrade Threshold parameters
e1-error-define PRA Define Threshold parameters
e1port Enter e1port command mode
e2etrace End to end signalling trace
early-drop <Group> early-drop command group
efm <Group> efm command group
emu <Group> EMU command group
encapsulation Set encapsulation type
epon <Group>EPON command group
erps Ethernet ring protection switching
esl Enter ESL(Ethernet Subscriber Line) user command
mode
eth <Group> eth command group
exchange-weight Overload control weight exchange
explicit-path Configure explicit path
F5 Set F5 oam configuration of port data
fax FAX parameter configure
fax-modem Fax and modem parameter configuration
firewall <Group> firewall command group
flush Smart Link FLUSH packet
frame Set frame attribute
gpon <Group> gpon command group
h248statistics H248 message statistic
hwtacacs-server Set HWTACACS server
igmp <Group> igmp command group
info-center Specify message output configuration information
interface <Group> interface command group
io-packetfile Activate the patch file of the board software packet
ip <Group> ip command group
ip-aware Ip aware feature command
ipoa IPoA config
ipprec-to-pbits IP precedence mapping table
ipv6 <Group> ipv6 command group
isis Intermediate System to Intermediate System (ISIS)
routes
isolate <Group> isolate command group
lacp Configure LACP Protocol
line-rate Limit the rate of the outbound packets of the interface
link-aggregation <Group> link-aggregation command group
linktrap Link trap switch of the port
lldp Link Layer Discovery Protocol
local-digitmap Config local digitmap
lspv Lsp verification
mac-address <Group> mac-address command group
mac-count-zero Maximum MAC address learning number is zero
mac-pool Configure/display MAC pool
manual-set Manual set PW fault configuration information
mass-sip-alarm Mass sip alarm info
merge HQoS merge queue
meth Meth routing
mg-overload-control MG overload control parameters
mgc-overload-control MGC overload control parameters of the MG
interface
mirror Add mirror
mmi-mode Activating the machine-machine mode
modem MODEM parameter configure
monitor-link Monitor link group
mpls <Group> mpls command group
multi-pw-ac-binding Multi PW AC binding
multi-r2-adapt <Group> multi-r2-adapt command group
multi-service-port Add multi-service-port
multicast <Group> multicast command group
multicast-unknown Multicast-unknown keyword
multicast-vlan Setup and enter multicast VLAN mode
nac <Group> nac command group
narrow Enter into the narrow resource mode
ntp-service Specify NTP (Network Time Protocol) configuration
information
ont <Group> ont command group
ont-alarm-policy Alarm policy profile
ont-digitmap-profile Ont digitmap profile
ont-ethoam Enter ONT ETHOAM mode
ont-if-h248 Ont h248 interface
ont-if-mgcp Ont MGCP interface
ont-if-sip Ont SIP interface
ont-lineprofile <Group>ONT line profile command group
ont-mg-attribute-profile
Ont mg attribute profile
ont-mgc-profile Ont mgc profile
ont-pots-profile Config pots profile
ont-pstnport Ont pstnport config
ont-sipagent-profile ONT SIP agent profile
ont-sippstnuser Sippstnuser
ont-siprightflag-profile
ONT SIP right flag Profile
ont-slaprofile Ont-slaprofile
ont-srvprofile <Group>ONT service profile command group
ont-voip-media Ont voip media
onu Set the function of managing the ONU through the
NAT proxy for the OLT
optical-alarm-profile Optical alarm profile
ospf Open Shortest Path First (OSPF)
ospfv3 OSPF version 3 for IPv6
overload-aware <Group> overload-aware command group
oversea Oversea parameters
packet Packet
packet-filter Filter packets based on acl
pbits-to-pbits Priority mapping table
pim Specify PIM(Protocol Independent Multicast)
configuration information
pitp <Group> pitp command group
pm Performance measurement
pmbs Enter pmbs user command mode
port <Group> port command group
power-dialer-control Power dialer control parameters
pppoa <Group> pppoa command group
pppoe <Group> pppoe command group
protect Protect group
protect-group Protect group
protocol <Group> protocol command group
pstnport Enter pstnport command mode
ptp <Group> ptp command group
pw PW information
pw-ac-append PW AC append
pw-ac-binding PW AC binding
pw-description PW description
pw-para <Group> pw-para command group
pw-protect PW protect
pw-redundancy PW redundancy
pw-revertive-mode Recovery mode
qos-policy-profile QoS policy profile
queue-buffer <Group> queue-buffer command group
queue-scheduler CoS queue scheduling mode
queue-shaping Queue shaping
queue-wred Set WRED profile of the queue(s)
quit Exit from current mode and enter prior mode
r2 R2 profile set
rack Set Rack description attribute
radius-server Add or delete radius-server template
raio <Group> raio command group
raio-anid ANID
raio-anip ANIP
raio-format Set user-defined RAIO format string
raio-mode Set relay agent info option mode
raio-profile RAIO profile
reset <Group> reset command group
return Enter the privileged mode
rfc2198 <Group> rfc2198 command group
ring Configure/display ring check information
rip <Group> rip command group
ripng RIPng (Routing Information Protocol next generation)
route-policy Route-policy
route-policy-change Specify route policy change parameter
router <Group> router command group
rrpp Rapid ring protection protocol
rsa Specify RSA module configuration information
sctp Sctp protocol
security <Group> security command group
service-num Service number configuration
service-port <Group> service-port command group
service-port-bundle Service virtual port bundle
shdsl <Group> shdsl command group
shutdown Deactivate the port on the standby board
sigtran Into sigtran module
simulate <Group> simulate command group
snmp-agent <Group> snmp-agent command group
snmp-profile <Group>SNMP profile command group
spc Enter spc user command mode
spm-profile Smart power management profile
ssh Specify SSH (secure shell) configuration information
stacking VLAN stacking
start Start keyword
static-lsp Static LSP configuration
stop Stop keyword
stp Spanning tree protocol
subboard <Group> subboard command group
subscriber HQoS subscriber
super Modify super password parameters
supervlan VLAN aggregation
syslog <Group> syslog command group
sysman <Group> sysman command group
system <Group> system command group
tag-mode Tag mode
tcont T-CONT
tcp Specify TCP(Transmission Control Protocol)
configuration information
tdm-connect TDM connect
tdm-vcl TDM VCL
tei-check TEI check parameters
temperature <Group> temperature command group
terminal <Group> terminal command group
test Enter test mode
tid-template TID template
time Set system time
time-range Specify time-range configuration information
trace Set TRACE transmission encryption switch
traffic Configure traffic table
traffic-limit <Group> traffic-limit command group
traffic-mirror Mirror the packets
traffic-priority Specify new priority of the packets
traffic-redirect Redirect the packets
traffic-statistic Count the packets
traffic-suppress Set traffic suppression
tunnel-policy Tunnel policy
undo Negate a command or set its defaults
upgrade Software upgrade
upward-bandwidth Set upward bandwidth parameters
user User define ring
userdef-template-port-para
User-defined config template
userdef-template-user-para
User-defined template user parameters config
vdsl VDSL
vlan <Group> vlan command group
vmac Configure/display VMAC information
voice-para-template Parameter template config
voice-spec VOIP specification
voip Enter voip mode
vrrp-snoop <Group> VRRP-SNOOPING command group
vsi Virtual switch instance
vsqm Enter the VSQM mode
vtp-cdp VTP-CDP
wred-profile WRED profile
xdsl <Group> xdsl command group
xpon <Group> xpon command group
xpon-profile-copy XPON profile copy
---------------------------------------------
Command of privilege Mode:
---------------------------------------------
active Enable configuration
alarm <Group> alarm command group
alarm-event Alarm and event
autosave <Group> autosave command group
backup <Group> backup command group
baudrate Set serial baudrate
clear <Group> clear command group
client Users information
debugging <Group> debugging command group
dhcp DHCP
diagnose Change into diagnose mode
disable Turn off privileged mode commands
display Display information
duplicate <Group> duplicate command group
erase Erase command
event <Group> event command group
file File system command word
file-server File server information
ftp FTP user and password configuration
infoswitch Set output switch of information terminal
load <Group> load command group
local-user Local-user
loghost Log server configuration operation
mpls MPLS parameters
patch Patch operation
ping <Group> ping command group
pppoe PPPoE
quit Exit from current mode and enter prior mode
reboot Reboot system,active board or standby board
refresh Do soft reset
reset <Group> reset command group
resource System resources(mem,message,cpu)
rollback System rollback command
save The command of saving immediately
serial-mode Set access-mode: console/CQT/112/SPL
set Set the operative time of undo rollback function
ssh Specify SSH (secure shell) configuration information
super Modify super password parameters
syslog <Group> syslog command group
sysman Configuration of the management channel
sysname Set system network name
system <Group> system command group
terminal <Group> terminal command group
time <Group> time command group
timezone Set time zone
tracert <Group> tracert command group
trap <Group> trap command group
trap-sync Set trap synchronization switch
undo Negate a command or set its defaults
vlan VLAN
---------------------------------------------
Command of user Mode:
---------------------------------------------
bandwidth Modify bandwidth
cls Clear screen
display Display information
echo Echo
help Description of the interactive help system
history-command Enable and control the command history function
idle-timeout Set the interval of terminal timeout
interactive Enable or disable command execute confirm function
mmi-mode Activating the machine-machine mode
quit Exit from current mode and enter prior mode
scroll Set auto or manual scroll function
smart Enable or disable smart function
stelnet Establish an Stelnet connection
super Modify super password parameters
switch Switch language mode
telnet Open a telnet connection
terminal Operation of config terminal
undo Negate a command or set its defaults
