09_M_ERT_02(config-test)#?
---------------------------------------------
Command of test Mode:
---------------------------------------------
display Display information
ont <Group> ont command group
pots Analog subscriber test
quit Exit from current mode and enter prior mode
return Enter the privileged mode
switch Switch language mode
undo Negate a command or set its defaults
wetting-current Wetting-current
xdsl MELT
09_M_ERT_02(config-test)#ont ?
---------------------------------------------
Command of test Mode:
---------------------------------------------
emulational Emulation test
pots-test ONT POTS test
pots-test-threshold ONT POTS test threshold
09_M_ERT_02(config-test)#ont
{ emulational<K>|pots-test-threshold<K>|pots-test<K> }:pots-test-threshol
Command:
ont pots-test-threshold ?
---------------------------------------------
Command of test Mode:
---------------------------------------------
restore Restore threshold value
set Set ONT POTS test threshold
09_M_ERT_02(config-test)#ont pots-test-threshold q
% Unknown command, the error locates at '^'
09_M_ERT_02(config-test)#
09_M_ERT_02(config-test)#display ont pots-test-threshold ?
---------------------------------------------
Command of test Mode:
---------------------------------------------
<cr> Please press ENTER to execute command
09_M_ERT_02(config-test)#display ont pots-test-threshold
----------------------------------------------------------------------
ont pots test threshold item Value
----------------------------------------------------------------------
Dial tone: T1 slow dial tone threshold(ms) :default
Dial tone: T2 no dial tone threshold(ms) :default
Dial tone: T3 slow break dial tone threshold(ms) :default
Dial tone: T4 no break dial tone threshold(ms) :default
Dial tone: Dial type(0:DTMF(default),1:pulse) :default
Dial tone: Dial digit(0-9:'0'-'9',10:'*',11:'#',12:default) :default
Dial tone: Dial tone frequency 1 (Hz) :default
Dial tone: Dial tone frequency 2 (Hz) :default
Dial tone: Dial tone frequency 3 (Hz) :default
Dial tone: Dial tone power
threshold (0x01-0xFD:-0.1~-25.3(step:0.1dBm0)) :default
Dial tone: Idle channel power
threshold(0x01-0x5A:-1~-90(step:1dBm0)) :default
DC hazardous voltage threshold(Volt) :default
AC hazardous voltage threshold(Volt) :default
DC foreign voltage threshold(Volt) :default
AC foreign voltage threshold(Volt) :default
Tip-ground and ring-ground resistance threshold(kilohm) :default
Tip-ring resistance threshold(kilohm) :default
Ringer equivalence minimum threshold(REN) :default
09_M_ERT_02(config-test)#?
---------------------------------------------
Command of test Mode:
---------------------------------------------
display Display information
ont <Group> ont command group
pots Analog subscriber test
quit Exit from current mode and enter prior mode
return Enter the privileged mode
switch Switch language mode
undo Negate a command or set its defaults
wetting-current Wetting-current
xdsl MELT
09_M_ERT_02(config-test)#ont ?
---------------------------------------------
Command of test Mode:
---------------------------------------------
emulational Emulation test
pots-test ONT POTS test
pots-test-threshold ONT POTS test threshold
09_M_ERT_02(config-test)#ont
{ emulational<K>|pots-test-threshold<K>|pots-test<K> }:pots-test-threshol
Command:
ont pots-test-threshold ?
---------------------------------------------
Command of test Mode:
---------------------------------------------
restore Restore threshold value
set Set ONT POTS test threshold
09_M_ERT_02(config-test)#ont pots-test-threshold q
% Unknown command, the error locates at '^'
09_M_ERT_02(config-test)#
09_M_ERT_02(config-test)#display ont pots-test-threshold ?
---------------------------------------------
Command of test Mode:
---------------------------------------------
<cr> Please press ENTER to execute command
09_M_ERT_02(config-test)#display ont pots-test-threshold
----------------------------------------------------------------------
ont pots test threshold item Value
----------------------------------------------------------------------
Dial tone: T1 slow dial tone threshold(ms) :default
Dial tone: T2 no dial tone threshold(ms) :default
Dial tone: T3 slow break dial tone threshold(ms) :default
Dial tone: T4 no break dial tone threshold(ms) :default
Dial tone: Dial type(0:DTMF(default),1:pulse) :default
Dial tone: Dial digit(0-9:'0'-'9',10:'*',11:'#',12:default) :default
Dial tone: Dial tone frequency 1 (Hz) :default
Dial tone: Dial tone frequency 2 (Hz) :default
Dial tone: Dial tone frequency 3 (Hz) :default
Dial tone: Dial tone power
threshold (0x01-0xFD:-0.1~-25.3(step:0.1dBm0)) :default
Dial tone: Idle channel power
threshold(0x01-0x5A:-1~-90(step:1dBm0)) :default
DC hazardous voltage threshold(Volt) :default
AC hazardous voltage threshold(Volt) :default
DC foreign voltage threshold(Volt) :default
AC foreign voltage threshold(Volt) :default
Tip-ground and ring-ground resistance threshold(kilohm) :default
Tip-ring resistance threshold(kilohm) :default
Ringer equivalence minimum threshold(REN) :default
09_M_ERT_02(config-test)#
09_M_ERT_02(config-test)#
