Scribd
Upload
211 views3 pages

466: Drive Shaft, Constant Velocity Joint, Drive Shaft Gear, B4164T, MPS6

This document provides instructions for removing and installing a drive shaft, constant velocity joint, and drive shaft gear for a Volvo vehicle with a B4164T engine and MPS6 transmission. It lists the special tools needed and outlines the steps to remove the wheel, loosen the wheel spindle, and disconnect the drive shaft using the special tools. Reinstallation is described as the reverse of the removal procedure.

Uploaded by

ojopodoabe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
211 views3 pages

466: Drive Shaft, Constant Velocity Joint, Drive Shaft Gear, B4164T, MPS6

This document provides instructions for removing and installing a drive shaft, constant velocity joint, and drive shaft gear for a Volvo vehicle with a B4164T engine and MPS6 transmission. It lists the special tools needed and outlines the steps to remove the wheel, loosen the wheel spindle, and disconnect the drive shaft using the special tools. Reinstallation is described as the reverse of the removal procedure.

Uploaded by

ojopodoabe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

466: Drive shaft, constant velocity joint, drive shaft gear, B4164T, MPS6 Page 1 of 3

466: Drive shaft, constant velocity joint, drive shaft gear, B4164T, MPS6

V40 (13-), 2014, B4164T, MPS6, YV1MV485BE2134709, 134709

30/10/2017 PRINT
466: Drive shaft, constant velocity joint, drive shaft
gear, B4164T, MPS6
Operation number:
46630-2
Driveshaft left

Special tools
951 2923 Hydraulic hole
cylinder
Tool number:951 2923
Tool description:Hydraulic
hole cylinder
Tool boards:65

999 7251 Press tool


Tool number:999 7251
Tool description:Press tool
Tool boards:40

999 5681 Jimmy bar


(Disconnecting/drive
shaft) AW50-42, M56
Tool number:999 5681
Tool description:Jimmy
bar (Disconnecting/drive
shaft) AW50-42, M56
Tool boards:46

Removal

Note! Removal
steps in this
procedure may
contain installation
details.

Warning! Do not
use magnets or
magnetic tools
close to tooth
wheels, drive
shafts or wheel

http://localhost/Vida/jsp/information/xml/xmlDocPrintPreview.jsp 10/30/2017
466: Drive shaft, constant velocity joint, drive shaft gear, B4164T, MPS6 Page 2 of 3

hubs. A magnetized
tooth wheel will
lose its function
and generate
incorrect signals
resulting in fault
codes.

Note! Any
magnetized tooth
wheel, drive shaft
or wheel hub must
be replaced with a
new component.

Remove the wheel

Refer to: Wheels

Torque: Driveshaft to wheel


hub (front)

◾ Stage 1: 35 Nm
◾ Stage 2: 90 °

Loosen wheel spindle

Refer to: Front control


arm

Special Tool: 951 2923

999 7251

http://localhost/Vida/jsp/information/xml/xmlDocPrintPreview.jsp 10/30/2017
466: Drive shaft, constant velocity joint, drive shaft gear, B4164T, MPS6 Page 3 of 3

Special Tool: 999 5681

Installation
To install, reverse the
removal procedure.

30/10/2017 PRINT

http://localhost/Vida/jsp/information/xml/xmlDocPrintPreview.jsp 10/30/2017

You might also like