Scribd
Upload
146 views2 pages

TETRA Base Station T-3845 Specs

T-3845 is a modular Tetra base station that can support 1, 2, 4, 6, or 8 carriers with a maximum output power of 30W and operating frequencies between 380-430MHz. It features 3-way receiver diversity, IP over Ethernet interface, support for GPS or PTP for time synchronization, and complies with relevant ETSI standards. The base station provides a redundant configuration of critical modules and is fully compatible with TETRA network and service standards.

Uploaded by

Solomon Gebreselassie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
146 views2 pages

TETRA Base Station T-3845 Specs

T-3845 is a modular Tetra base station that can support 1, 2, 4, 6, or 8 carriers with a maximum output power of 30W and operating frequencies between 380-430MHz. It features 3-way receiver diversity, IP over Ethernet interface, support for GPS or PTP for time synchronization, and complies with relevant ETSI standards. The base station provides a redundant configuration of critical modules and is fully compatible with TETRA network and service standards.

Uploaded by

Solomon Gebreselassie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

T-3845

TETRA BASE STATION

www.aselsan.com
HBT-T-3845/ E001 / 03-2017
T-3845
Tetra Base Station

Specifications are subject to change without any notice. | All tolerances are within ±10%.
Technical Specifications • Redundant configuration of critical modules (Power supply, Site
controller etc.).
1 / 2 / 4 / 6 or 8 Carrier, Modular Design • Fully compatible with ETSI standards (ETSI EN 300 392-xx)
Frequency Band 380-430 MHz
Maximum Output Power 30W • ETSI EN 300 392-2 V3.4.1 (2010-08) TETRA Voice +Data
Sensitivity - Static –118 dBm (V+D); Part 2: Air Interface (AI) (Class-2 & π/4 DQPSK
Sensitivity - Dynamic –112 dBm modulation)
Operating Temperature -30°C /+60°C • ETSI EN 300 392-1 V1.4.1 (2009-01) TETRA (V+D); Part 1:
Storage Temperature -40°C /+70°C General network design
• ETSI EN 300 394-1 V3.2.1 (2012-10) TETRA Conformance
• 3 way “Receiver Diversity” testing specification; Part 1: Radio
• “IP over Ethernet” interface. (Unicast and Multicast IP • ETSI EN 300 392-9 V1.5.1 (2012-04) TETRA (V+D); Part 9:
Switching) General requirements for supplementary services
• Support of “GPS disciplined clocks” or “Centralized clock • ETSI EN 300 392-3-1 V1.3.1 (2010-08) TETRA (V+D); Part
& PTP [Precision Time Protocol]” for time syncronization. 3: Interworking at the Inter-System Interface (ISI); General
design
• EN 301 489-1,EMI/EMC standard

3 Way Antenna &


Tetra Base Station – 8 Carrier Transceiver Receiver Diversity

P: +90 (312) 592 10 00 | F: +90 (312) 354 13 02 | hbtmarketing@aselsan.com.tr ASELSAN A.Ş. is a Turkish Armed Forces Foundation company.

You might also like