Scribd
Upload
5K views2 pages

1.0 Cable Tray Technical Data Sheet

The document provides a technical data sheet for cable trays including ladder and perforated types. It lists specifications for material, thickness, dimensions, loading capacity, fittings and accessories. Key details include the cable trays being made of hot dip galvanized MS sheet, having a maximum deflection of 7mm under load, and zinc coating of minimum 610 grams per square meter and 75 microns in thickness.

Uploaded by

Rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5K views2 pages

1.0 Cable Tray Technical Data Sheet

The document provides a technical data sheet for cable trays including ladder and perforated types. It lists specifications for material, thickness, dimensions, loading capacity, fittings and accessories. Key details include the cable trays being made of hot dip galvanized MS sheet, having a maximum deflection of 7mm under load, and zinc coating of minimum 610 grams per square meter and 75 microns in thickness.

Uploaded by

Rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ANNEXURE-1

TECHNICAL DATA SHEET

SL. NO ITEM DESCRIPTION


1.0 Cable tray Technical Data Sheet

1.1 Type Ladder & Perforated Type


1.2 Material MS sheet as per IS – 2062, Hot dip galvanized as per
IS - 2629
1.3 Thickness of 2 mm up to 450 mm wide tray and
Material 2.5 mm above 450 mm wide tray
1.4 Standard length 2.5 Mtrs
of each cable
tray
1.5 Rung spacing 250 mm
1.6 Rung width Min. 50 mm
1.7 Height of Cable 50 mm upto 100 mm wide cable tray and
tray 100 mm above 100 mm wide cable tray
1.8 Holes in cable Four circular holes on both the faces of each side
tray straight run of rail.
1.9 Elliptical hole size 20x10 mm
for Along the length @ 40mm center to center
perforated cable distance
tray Along the width @30mm center to center
distance
1.10 Max deflection in 7mm
centre of
cable tray at the
time of max
loading.
1.11 Max. loading
capacity on the
cable tray
2.0 Coupler Plate
2.1 Material MS sheet as per IS – 2062, Hot dip galvanized as per
IS - 2629
2.2 Thickness of 3mm
coupler plate
2.3 Holes Four circular and four elliptical in coupler plate
3.0 Zinc Coating
3.1 Weight of Zinc 610 gms / Sq. mtr (Min.)
coating
3.2 Thickness of Zinc 75 Microns. (min.)
deposit
4.0 Accessories
(Bend, Reducer,
Tee,
Y section, Tray
cover and
Clamp)
4.1 Type Ladder Type & Perforated Type
4.2 Material MS sheet as per IS – 2062, Hot dip galvanized as per
IS - 2629
5.0 Fittings (Nuts,
Bolts &
Washers)
5.1 Material MS (as per requirement)
Hot dip galvanized as per IS 2629
6.0 Fiber
Reinforced
Plastic (FRP)
Tray (If,
applicable)
Max deflection in
centre of
cable tray at the
time of max
loading.
Max. loading
capacity on the
cable tray
UV protection
coating details
Flame retardant
property
Chemical
resistance
property

You might also like