Comitrol® Processor Model 1700

Controlled Particle Size Reduction

COMITROL® PROCESSOR MODEL 1700

SPECIFICATIONS OPERATING PRINCIPLE

Length:. . . . . . . . . . . . . . . . . . . . . . 50.69" (1288 mm) Product [ 1 ] is guided to the high speed, rotating impeller. When product
Width:. . . . . . . . . . . . . . . . . . . . . . . . 33.31" (846 mm) reaches the impeller [ 2 ], it revolves at a high speed inside the cutting
Height:. . . . . . . . . . . . . . . . . . . . . *72.13" (1832 mm) head [ 3 ]. Centrifugal force propels the product outward past the cutting
Net Weight:. . . . . . . . . . . . . . . . . . . . 1100 lb (499 kg) edges of the stationary reduction head. Small portions of product
Motor:. . . . . . . 15, 30, or 40 HP (11.2, 22.4, or 30 kW) projecting into the spaces between the separators are cut off into flakes
by spaced columns of vertical knives. These flakes fly outward and away
from the cutting head. The wall surfaces between the vertical knives are
APPLICATIONS relieved to eliminate rubbing friction that would produce heat.
The Comitrol Processor Model 1700 accommodates all three types of
reduction heads which enables a broad spectrum of product processing
capabilities. It is recommended for free-flowing dry and semi-dry product 1. Impeller
2. Horizontal
applications including textured vegetable protein, peanut butter, chicken 2
Separators
3
slurries, surimi, baby food, dehydrated potato flakes, fruit and vegetable 3. Vertical
pastes, horseradish and dressings, extruded products, biscuits and Knives
cookies, nuts, fruit pulp, various spices, corn masa, hard cheeses, and
1
a variety of gels, ointments, and creams.
This preci­sion cutting principle has proven to be a processing CUTTING HEAD ASSEMBLY
breakthrough, with the versatility to meet your size reduction needs
from coin size particles to fine emulsions. Standard operations include 1. Impeller
2. Blades
comminuting, granulating, milling, flaking, slicing, liquefying, dispersing,
and pureeing. 2
Sealed enclosure deters escape of dust, vapor, and liquid when the
Comitrol Processor is installed in conjunction with a collec­tion system. 1
Stainless steel construction ensures maximum durability and sanitation.
The machine features continuous operation for uninterrupted production, MICROCUT HEAD ASSEMBLY
and is designed for easy cleanup and maintenance.
Product 1. Impeller
2. Knife
TYPES OF CUTS
Particle sizes ranging from coarse to fine emulsions are possible. To 1 2
ensure the proper combination of cutting parts, Urschel Laboratories,
Inc. recommends your product be tested in one of our worldwide Product
Test Facilities free-of-charge to find the most efficient solution to your size
SLICING HEAD ASSEMBLY
reduction needs.
If your product application is not mentioned on this page, contact your local Urschel representative to determine the most effective solution to your size reduction needs.
(over)
 Comitrol® Processor Model 1700
Dimensional Drawing

*USUAL HEIGHT WITH 40 H.P. MOTOR IS SHOWN. THIS HEIGHT WILL VARY
DEPENDING ON HORSEPOWER AND MOTOR MANUFACTURER. CONSULT
URSCHEL LABORATORIES, INC. TO DETERMINE SPECIFIC HEIGHT.

You Are Invited to Test Cut Your Product

Urschel Laboratories has a complete network of test facilities and ®
experienced service and sales representatives around the world
ready to work for you on any size reduction application. Con-
tact your local Urschel Laboratories’ representative to schedule www.urschel.com | info@urschel.com
a comprehensive, no-obligation test today at www.urschel.com.
®Comitrol and Urschel are registered trademarks of Urschel Laboratories, Inc.
L2591 DEC 2013 (s.s. L2056)