4-559-901-14(1)

Basic Operations
 Folder names can be displayed with up to 32 characters, Listening to music
including quotation marks.
Listening to music wirelessly on a Listening to the radio
 File names can be displayed with up to 32 characters,
including quotation marks and file extensions. BLUETOOTH device Check the following before operating the unit.
 The BLUETOOTH function of the BLUETOOTH 1 Press FM/AM  repeatedly to turn on the
 Characters and symbols that cannot be displayed by the
unit will appear as “_”. device is turned on. radio function and select the band “FM” or
Using the BLUETOOTH connection, you can listen to

Personal Audio System  This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the music from wirelessly connected BLUETOOTH  Pairing has been completed. (See “Pairing this unit “AM.”
ID3 tag format for MP3 files, the WMA tag format defined with a BLUETOOTH device”.)
by the ASF specification (Advanced Systems Format) for
devices such as mobile phones, smartphones, music 2 Hold down TUNE + or   until the frequency
players, etc. digits begin to change on the display.
WMA files, and the AAC tag format for AAC files. 1 Make the BLUETOOTH connection between
Operating Instructions When a file has the ID3, WMA or AAC tag information, the
song title, artist name, and album name will be displayed. the unit and the device. The unit automatically scans the radio
frequencies and stops when it finds a clear
If a file does not have the tag information, the unit
For an NFC-incompatible BLUETOOTH station.
displays as follows:
 File name instead of the song title. device If you cannot tune to a station using automatic
 “NO ARTIST” message instead of the artist name. Press BLUETOOTH  to turn on the BLUETOOTH tuning mode, press TUNE + or   repeatedly to
 “NO ALBUM” message instead of the album name. function. change the frequency step by step.
ID3, WMA and AAC tag information can be displayed up to The last connected device will be connected When an FM stereo broadcast is received, “ST”
64 characters. automatically. lights up on the display.
Note
For an NFC-compatible smartphone The unit of frequency of tuned stations is MHz for the FM
Transferring music from a disc to a Pairing this unit with a
Touch the smartphone to the N-Mark  on the
unit.
band and kHz for the AM band.
©2014 Sony Corporation Printed in China *   and VOL +  have a tactile dot.
USB device BLUETOOTH device Notes on handling the FM antenna
2 Start playback of an audio source such as
 WMA files encoded in WMA DRM, WMA Lossless and  When adjusting the length, hold
You can transfer a whole disc (CD SYNC transfer) or music, videos, games, etc., on the device.
ZS-RS60BT Before using the unit WMA PRO formats cannot be played back.
the currently playing track or file (REC1 transfer) to a
BLUETOOTH devices must be “paired” with each
other beforehand. Once BLUETOOTH devices are Refer to the instruction manual of your device for
the antenna by the thickest part
and top, and extend/retract it
 This unit cannot play audio files on a disc in the following
USB device (digital music player or USB storage details on playback operations. slowly.
cases: paired, there is no need for pairing again, unless the
To turn the power on or off  When the total number of audio files exceeds 999. media, etc.). pairing information is cleared.
When transferring from a CD, the tracks are Tip
Press POWER . You can also turn on the power of  When the total number of folders on a single disc Choose the pairing method below depending on To adjust the volume, set the volume of the BLUETOOTH
The following FCC/IC statement applies this unit using the direct power-on function (below). exceeds 256 (including the “ROOT” folder). transferred as MP3 files with a sampling frequency your device. device or the smartphone to the moderate level, and then  When adjusting the direction,
 When the directory level (folder depths) exceeds 8 of 44.1 kHz at 128 kbps (CBR). When transferring press VOL  or +  on the unit. hold the antenna by the
only to the version of this model In this manual, operations are mainly explained
using the direct power-on function.
(including the “ROOT” folder). from an MP3/WMA disc, MP3/WMA files are Pairing with an NFC-incompatible BLUETOOTH thickest part and rotate it. If you
manufactured for sale in the USA and  Folder names can be displayed with up to 32 characters, transferred with the same bit rate as the original device: To terminate a BLUETOOTH connection
move the antenna by the top or
apply strong force, it may break.
Canada. Other versions may not comply including quotation marks. MP3/WMA files. see Pattern A Do any of following.
To use the direct power-on function  File names can be displayed with up to 32 characters,
with FCC/IC technical regulations.  Turn off the BLUETOOTH function of the
Press CD , USB , BLUETOOTH , FM/AM , including quotation marks and file extensions. 1 Connect the USB device to the  (USB) port . Pairing with an NFC-compatible smartphone:
AUDIO IN  or FAVORITE RADIO STATIONS (1-3)  see Pattern B BLUETOOTH device. For details, refer to the
NOTE:
 Characters and symbols that cannot be displayed by the 2 Press CD  to turn on the CD function.
operating instructions supplied with the device. To improve radio reception
while the unit is turned off. The power turns on with unit will appear as “_”.
For United States customers. Not applicable in the relevant function selected.  This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the
3 Place the disc you want to transfer in the CD
 Turn off the BLUETOOTH device.
Use the radio in a place where
Canada, including in the province of Quebec. ID3 tag format for MP3 files and the WMA tag format compartment. radio signals can be easily
Pattern A  Change the function of the unit.
Owner’s Record defined by the ASF specification (Advanced Systems received, such as near a window.
This equipment has been tested and found to To adjust the volume Format) for WMA files. When a file has the ID3 or WMA tag ĄĄCD SYNC transfer  Turn off the unit. Also, adjust the antenna (FM) or
The model and serial numbers are located on the comply with the limits for a Class B digital device, Press VOL + or  .
Pairing with an NFC-incompatible
information, the song title, artist name, and album name To transfer a whole disc  Touch the unit with the smartphone again to reorient the unit itself (AM) for
bottom of the unit. Record these numbers in the pursuant to Part 15 of the FCC Rules. These limits are will be displayed. If a file does not have the tag BLUETOOTH device disconnect (NFC-compatible smartphones only).
space provided below. Refer to them whenever you Proceed to step 4. good reception.
designed to provide reasonable protection against information, the unit displays as follows: Keep the BLUETOOTH device and the unit within 1
call upon your Sony dealer regarding this product. To listen through headphones meter (39 3/8 in) of each other for this operation.
harmful interference in a residential installation.  File name instead of the song title. To clear the paired device information Adjust the antenna to
Connect headphones to the  (headphones) jack To transfer MP3/WMA files in a specific
This equipment generates, uses and can radiate  “NO ARTIST” message instead of the artist name. improve FM reception. If the
Model No. ZS-RS60BT radio frequency energy and, if not installed and
.
 “NO ALBUM” message instead of the album name.
folder 1 Press BLUETOOTH  to turn on the 1 Hold down ERASE  until “BT RESET” appears stereo FM reception is noisy,
Serial No. used in accordance with the instructions, may cause ID3 and WMA tag information can be displayed up to 64 Set the play mode to folder play ( ) or folder BLUETOOTH function. on the display. press FM MODE  repeatedly
To reinforce the bass repeat play ( , ), and then press  + or  
harmful interference to radio communications. characters.
repeatedly to select the folder you want.
If no devices have been paired, such as when you 2 Press ENTER . until “MONO” appears on the
However, there is no guarantee that interference will Press MEGA BASS . press BLUETOOTH  for the first time after you display. You will lose the
When the paired device information is cleared,
not occur in a particular installation. If this “MEGA BASS” lights up on the display. purchase the unit, the unit automatically enters stereo effect, but the
WARNING equipment does cause harmful interference to radio To return to normal sound, press the button again.
Listening to music on a USB device
To transfer only your favorite tracks/files
Perform step 1 to 5 of “Creating your own
pairing mode, and the BLUETOOTH indicator ( )
“COMPLETE” appears on the display. To cancel
the reset operation, press  . reception will be improved.
or television reception, which can be determined by and “PAIRING” flash on the display.
turning the equipment off and on, the user is program (Program Play)” on the back page.
To reduce the risk of fire or electric shock, do not
You can listen to audio files stored on a USB device
expose this apparatus to rain or moisture. encouraged to try to correct the interference by one
or more of the following measures:
Playing a music disc (a digital music player or USB storage media). ĄĄREC1 transfer
Reorient the unit
itself to improve AM
To reduce the risk of fire, do not cover the ventilation  Reorient or relocate the receiving antenna. Audio files in MP3, WMA and AAC formats* can be To transfer a single track/file reception. (A ferrite
opening of the appliance with newspapers,  Increase the separation between the equipment 1 Press CD  to turn on the CD function. played on this unit.
Select and start playback of the track/file you bar antenna is built
tablecloths, curtains, etc. Do not expose the and receiver. 2 Press PUSH OPEN/CLOSE  , place a disc in * Files with copyright protection (Digital Rights want to transfer. When pairing with two or more in the unit.)
appliance to naked flame sources (for example,  Connect the equipment into an outlet on a the CD compartment and then close the Management) cannot be played on this unit. BLUETOOTH devices
lighted candles). circuit different from that to which the receiver is
compartment cover.
4 Press REC .
Hold down BLUETOOTH (–PAIRING)  until two
To reduce the risk of fire or electric shock, do not connected. 1 Connect the USB device to the  (USB) port . “REC” flashes on the display and the unit starts If the reception problem still persists, try changing
beeps are heard.
expose this apparatus to dripping or splashing, and  Consult the dealer or an experienced radio/TV 2 Press USB  to turn on the USB function. calculating the amount of free space on the USB the installation location.
technician for help. The volume label scrolls once, then the total device. Avoid places such as the following:
do not place objects filled with liquids, such as 2 Turn on the BLUETOOTH function of the
vases, on the apparatus. This device complies with Part 15 of the FCC Rules. number of folders appears on the display.
Label side up BLUETOOTH device.
Operation is subject to the following two conditions:
As the main plug is used to disconnect the unit from 3 Perform the pairing procedure on the
(1) this device may not cause harmful interference,
the mains, connect the unit to an easily accessible
and (2) this device must accept any interference BLUETOOTH device to detect the unit.
AC outlet. Should you notice an abnormality in the
unit, disconnect the main plug from the AC outlet
received, including interference that may cause 4 Select “ZS-RS60BT” shown on the display of
undesired operation. Between
immediately. Total number of folders If “LOW ***M” appears on the display, there is not the BLUETOOTH device.
buildings
The unit is not disconnected from the AC power sufficient space on the device. To cancel the If “ZS-RS60BT” does not appear on the device’s
CAUTION The disc is loaded and the disc information transferring, press  . To continue transferring display, repeat from step 2.
source (mains) as long as it is connected to the wall 3 Press   to start playback.
outlet, even if the unit itself has been turned off. You are cautioned that any changes or modifications appears on the display.
The folder name and song title are displayed, and
anyway, proceed to step 5. 5 If Passcode* input is required on the display of
not expressly approved in this manual could void 5 Press ENTER . Nearby
Do not install the appliance in a confined space, Audio CD then the file number and playing time appear. the BLUETOOTH device, input “0000.”
your authority to operate this equipment. mobile
such as a bookcase or built-in cabinet. Transferring starts. The BLUETOOTH connection is established.
This equipment must not be co-located or operated Total number of tracks File number When transferring is completed, playback stops phones,
“BT AUDIO” appears on the display.
Excessive sound pressure from earphones and in conjunction with any other antenna or transmitter. automatically (CD SYNC transfer) or proceeds to electrical
* “Passcode” may be referred to as “Passkey,” “PIN code,”
headphones can cause hearing loss. the next track/file (REC1 transfer). “PIN number,” or “Password.”
appliances
This equipment complies with FCC/IC radiation
Do not expose the batteries (battery pack or exposure limits set forth for an uncontrolled
batteries installed) to excessive heat such as environment and meets the FCC radio frequency To stop transferring
sunshine, fire or the like for a long time. (RF) Exposure Guidelines and RSS-102 of the IC radio Press  .
Total playing time Playing time* When the transferring source is a CD-DA track, the On steel desks
The nameplate is located on the bottom exterior. frequency (RF) Exposure rules.
audio file is generated up to the point the or tables
This equipment has very low levels of RF energy
Important Safety Instructions that is deemed to comply without maximum MP3/WMA disc * If the playing time is longer than 100 minutes, “--:--” transferring was stopped. When the source is an Tip
permissive exposure evaluation (MPE). But it is appears on the display. MP3 or WMA file, the file that is currently being You can pair up to 8 BLUETOOTH devices. If the 9th
1) Read these instructions.
desirable that it should be installed and operated transferred is not generated. BLUETOOTH device is paired, the oldest paired device will be
2) Keep these instructions. Other operations
keeping the radiator at least 20 cm or more away deleted.
3) Heed all warnings.
4) Follow all instructions. from person’s body. To Do this Folder and file generation rules
Notes
5) Do not use this apparatus near water. Pause playback Press  . To return to When first transferring to a USB device, a “MUSIC”
 Pairing mode of the unit is cancelled after about Presetting stations to FAVORITE
This symbol is intended to alert the Total number of folders* playback, press the button folder and its sub folder “SONY” are created directly
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in user to the presence of uninsulated again*. below the “ROOT” folder.
5 minutes, and the BLUETOOTH indicator ( ) flashes. If
pairing mode is cancelled while performing this
RADIO STATIONS
“dangerous voltage” within the * If MP3/WMA files are present only in the root directory Folders and files are generated within the “CD” procedure, start over from step 1.
accordance with the manufacturer’s instructions. Stop playback Press  . When you press 
product’s enclosure that may be of (“ROOT” folder), “1FLDR” appears on the display. folder under the “SONY” folder based on the You can preset up to three favorite stations to
8) Do not install near any heat sources such as  after playback is stopped,  The passcode of the unit is fixed as “0000.” The unit
radiators, heat registers, stoves, or other sufficient magnitude to constitute a 3 Press   to start playback. following rules. cannot be paired with a BLUETOOTH device whose FAVORITE RADIO STATIONS (1-3) buttons. Assign one
risk of electric shock to persons. playback starts from the point Passcode is not “0000.” FM or AM program for each button.
apparatus (including amplifiers) that produce Track number or MP3/WMA file where you stopped playback CD SYNC transfer
heat.
This symbol is intended to alert the number (Resume Play).
Transferring Pattern B
1 Press FM/AM  repeatedly to turn on the
9) Do not defeat the safety purpose of the Folder name File name
user to the presence of important Select a folder Press  + or  . source radio function and select the band “FM” or
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
operating and maintenance
MP3/WMA Same as the transferring source*1, 2
Pairing with an NFC-compatible “AM.”
(servicing) instructions in the Select a file Press  or  . You can
other. A grounding type plug has two blades smartphone 2 Tune to the station you want to preset.
literature accompanying the skip files one by one. CD-DA “ALBUM001”*3 “TRACK001”*4
and a third grounding prong. The wide blade or By just touching the unit with an NFC-compatible
appliance. To skip files continuously, hold
smartphone, the unit is turned on and switched to
3 Press and hold the desired FAVORITE RADIO
the third prong are provided for your safety. If down  or   and
This graphical symbol is located on the bottom of Playing time REC1 transfer the BLUETOOTH function automatically and then STATIONS (–SET) (1-3) button  until you hear
the provided plug does not fit into your outlet, release the button at the desired
consult an electrician for replacement of the the unit. paired and connected to the smartphone. a beep.
file. Transferring
obsolete outlet. When you play an MP3/WMA disc, the folder Folder name File name The tuned station is preset to the selected button
source Compatible smartphones
10) Protect the power cord from being walked on or Notice for the customers in Canada name*1 and song title are displayed before the Find a point in a Hold down  or   of FAVORITE RADIO STATIONS (1-3) and the same
playing time*2 appears. file during playback, and release the Same as the NFC-compatible smartphones with Android™ 4.1 or later
pinched particularly at plugs, convenience This device complies with Industry Canada installed number as that of the button will light up on the
button at the desired point. MP3/WMA transferring
receptacles, and the point where they exit from licence-exempt RSS standard(s). *1 If MP3/WMA files are present only in the root directory, “REC1”*5 display.
“ROOT” appears on the display. When locating a point while source*2
the apparatus. Operation is subject to the following two conditions: What is “NFC”?
11) Only use attachments/accessories specified by (1) this device may not cause interference, and (2) *2 If the playing time is longer than 100 minutes, “--:--” paused, press   to start CD-DA “TRACK001”*4 NFC (Near Field Communication) is a (Example: Presetting FM 87.5 MHz to number )
the manufacturer. this device must accept any interference, including appears on the display. playback after the desired point technology enabling short-range wireless
is found. *1 In Program Play mode, the folder name is “FLDRxxx,” and
12) Use only with the cart, stand, tripod, interference that may cause undesired operation of Other operations the file name depends on the transferring source. communication between various devices,
bracket, or table specified by the the device. *2 Up to 32 characters (including a file extension for a file such as mobile phones and IC tags. Thanks to
* When playing a VBR MP3/WMA/AAC file, playback may
manufacturer, or sold with the To Do this the NFC function, data communication can be
restart from a different point. name) can be displayed.
apparatus. When a cart is used, use Pause playback Press  . To return to *3 Folder names are assigned in sequential order up to a achieved easily just by touching the relevant
caution when moving the cart/ Personal Audio System is designed to be used playback, press the button Note maximum of 256 (including the “ROOT” and “MUSIC” symbol or designated location on NFC
apparatus combination to avoid injury for playing back music sources on CDs or USB again. When removing a USB device, hold down   until “NO folders). compatible devices.
from tip-over. devices, transferring music to USB devices, DEV” appears, and then turn off the unit or switch to other
*4 File names are assigned in sequential order. To change the preset station
13) Unplug this apparatus during lightning storms or listening to radio stations, and listening to music Stop playback Press  . When you press  functions beforehand. Removing the USB device without Repeat steps 1 to 3.
*5 A new file is transferred to the “REC1” folder each time
 after playback is stopped, performing these steps may corrupt the data on the USB
when unused for long periods of time. on BLUETOOTH® devices.
device or damage the device itself.
single track transfer is performed. 1 Turn on the NFC function of the smartphone. The preset station on the button will be replaced by
14) Refer all servicing to qualified service personnel. playback starts from the point the new one.
where you stopped playback For details, refer to the operating instructions
Servicing is required when the apparatus has Example of folder structure and playing order To erase audio files or folders from the USB supplied with the smartphone.
been damaged in any way, such as power- (Resume Play).
The playing order of the folders and files is as device 2
supply cord or plug is damaged, liquid has been Select a folder Press  + or  . follows. However, the playing order may differ from
Touch the unit with the smartphone. Listening to preset stations with
spilled or objects have fallen into the apparatus, on an MP3/WMA the original order on the USB device, depending on
1 Press  or   repeatedly to select an Keep touching the smartphone to the N-Mark 
FAVORITE RADIO STATIONS
the apparatus has been exposed to rain or audio file, or press  + or –  repeatedly to on the unit until the smartphone responds.
disc the recording method used.
moisture, does not operate normally, or has select a folder. Note Press the desired FAVORITE RADIO STATIONS (1-3)
Select a track/ Press  or  . You can USB device
been dropped. Folder 2 Press ERASE . If your smartphone screen is locked, the smartphone will button .
file skip tracks/files one by one.
MP3/WMA/AAC file not function. Release the lock, then touch the
“ERASE?” appears on the display.
Find a point in a Hold down  or   smartphone to the N-Mark  again. Note
track/file during playback, and release the 3 Press ENTER . To prevent the preset from being changed by mistake, do
Smartphone responds not hold down the button. If doing so, the preset on the
button at the desired point. “TRACK ERASE?” or “FOLDER ERASE?” appears on
(unit recognized) button will be replaced by the currently tuned station.
When locating a point while the display.
paused, press   to start 4 Press ENTER .
playback after the desired point The selected audio file or folder is erased, and
is found. “COMPLETE” appears on the display.

Power Sources Tip Notes

To cancel the Resume Play, press   while the CD is  If you start transferring in shuffle play or repeat play
stopped. mode, the selected play mode is automatically changed
Connect the AC power cord , or insert six R14 (size C) batteries (not supplied) into the battery compartment . to normal play.
Note  Do not remove the USB device during transferring or erase
Resume Play is cancelled in the following cases: operations. Doing so may corrupt the data on the device 3 Follow the on-screen instructions to establish
 When you open the CD compartment. or damage the device itself.
the connection.
 When you turn off the power.  While transferring, no sound is output and “HI-SPEED”
appears on the display. When the BLUETOOTH connection is established,
To a wall outlet Example of folder structure and playing order  CD-TEXT information is not transferred in the created MP3 “BT AUDIO” appears on the display.
The playing order of the folders and files is as files.
Notes on the USB device
follows. However, the playing order may differ from  Transferring stops automatically if:
 It may take a long time before playback starts when:
the original order on the disc, depending on the  the USB device runs out of space during transferring.
AC power cord (supplied) To AC IN  the folder structure is complex.
recording method used.  the number of audio files and folders on the USB device
 the USB device is close to capacity.
reaches the limit that the unit can recognize.
 Do not save non-MP3/WMA/AAC files or unnecessary
Folder folders to a USB device that contains MP3/WMA/AAC files.  Non-MP3/WMA/AAC format files or sub folders in the Tips
MP3/WMA file folder are not erased.
 During playback, audio files other than MP3, WMA and  If it is difficult to establish the connection, try the
AAC files are skipped even if those files are included in a  Radio sound and sound from an optional component following.
Rear The batteries are oriented folder. cannot be transferred to a USB device.  Move the smartphone over the N-Mark  on the
in different directions.  The audio formats supported by this unit are as follows: unit slowly.
Note on copyright-protected content
Insert them in the correct  MP3: file extension “.mp3”  If the smartphone is in a case, remove it.
The transferred music is limited to private use only. Use of
orientation as illustrated  WMA: file extension “.wma” the music beyond this limit requires permission from the  Touch the unit with the smartphone again to
here.  AAC: file extension “.m4a,” “.3gp” and “.mp4” copyright holders. disconnect.
Avoid using old batteries Note that even if the file name has the correct file  If you have multiple NFC-compatible devices, just
with new ones or mixing extension but the actual file was created in a different touch the smartphone to a different device to switch
different type of batteries. audio format, this unit may produce noise or may the connection to that device. For example, when your
malfunction. smartphone is connected with NFC-compatible
headphones, just touch the smartphone to the unit to
 MP3 PRO format is not supported.
change the BLUETOOTH connection to the unit
 WMA files encoded in WMA DRM, WMA Lossless and (One-touch connection switching).
WMA PRO formats cannot be played back.
 AAC files encoded in copyright-protected AAC format
Notes cannot be played back.
 When using the radio on batteries and the battery power drops to a certain level, the OPR/BATT indicator  dims or the power  This unit supports the AAC-LC (AAC Low Complexity)
of the radio may go off during playback. If this happens, replace all the batteries with new ones. Even after the OPR/BATT profile.
indicator  becomes dim, you can use the radio function for some time, although you cannot use the CD player. Before you  This unit cannot play audio files on a USB device in the
replace the batteries, be sure to remove any CD and disconnect any USB devices or optional components from the unit. Notes on MP3/WMA discs following cases:
 To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.  When a disc is loaded, the unit reads all the files on that  When the total number of audio files in a single folder
disc. During this time, “READING” is flashing. If there are exceeds 999.
 Batteries have a recommended use-by date for proper use. When using expired batteries, battery life will be extremely short. many folders or non-MP3/WMA files on the disc, it may
Check the use-by date on the batteries and if they are expired, replace them with new ones.  When the total number of audio files on a single USB
take a long time for play to begin or for the next MP3/ device exceeds 5,000.
 In standby mode with the AC power cord connected, “STANDBY” appears on the display. WMA file to start to play.  When the total number of folders on a single USB
 We recommend that non-MP3/WMA files or unnecessary device exceeds 256 (including the “ROOT” folder).
folders are excluded when creating MP3/WMA discs.  When the directory level (folder depths) exceeds 8
 During playback, audio files other than MP3 and WMA (including the “ROOT” folder).
files are skipped even if those files are included in a folder. These numbers may vary depending on the file and folder
 The audio formats supported by this unit are as follows: structure.
 MP3: File extension “.mp3”  Compatibility with all encoding/writing software is not
 WMA: File extension “.wma” guaranteed. If audio files on the USB device were
Note that even if the file name has the correct file originally encoded with incompatible software, those files
extension but the actual file was created in a different may produce noise or interrupted sound, or may not be
audio format, this unit may produce noise or may played back at all.
malfunction.
 MP3 PRO format is not supported.
 4 Press ENTER . The USB device is not recognized.
Other Operations The track/file is programmed. Additional Information Precautions Troubleshooting  Turn off the unit and reconnect the USB device, Specifications License and Trademark Notice
The program step number appears, followed by then turn on the unit.
the total playing time.  The USB device is not functioning properly. Refer AUDIO POWER SPECIFICATIONS  MPEG Layer-3 audio coding technology and
Discs that this unit CAN play General to the USB device operation manual for details on
Using the display
(Example: audio CD)
Compatible devices  Audio CD (CD-DA*1 tracks) how to deal with this problem.
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
(The United States model only)
patents licensed from Fraunhofer IIS and
Thomson.
The power does not turn on. With 6-ohm loads, both channels driven from 150 Hz 
 CD-R/CD-RW that contains MP3/WMA files and  Windows Media is either a registered trademark
Compatible USB devices is finalized*2 correctly. Play does not start. 10,000 Hz; rated 1.5 W per channel-minimum RMS power,
or trademark of Microsoft Corporation in the
Checking the information of an audio CD  Make sure the AC power cord is connected to the with no more than 10 % total harmonic distortion in AC
Compatibility requirements for the USB devices are *1 wall outlet securely.  Turn off the unit and reconnect the USB device. operation. United States and/or other countries.
Press   twice to cancel Resume Play. CD-DA is the abbreviation for Compact Disc Digital Audio.
The total number of tracks and total playing time
as follows. Before using a device with this unit, It is a recording standard used for audio CDs.  Make sure the connector of AC power cord is CD player section  This product is protected by certain intellectual
Step number check that it meets the requirements. *2 Finalizing is the process to make the CD-R/CD-RW discs inserted into the AC IN jack securely. Play does not start from the first track. property rights of Microsoft Corporation. Use or
appear on the display. System
playable on the consumer disc player products, and the  Check if the batteries are inserted correctly,  Set the play mode to Normal Play. Compact disc digital audio system distribution of such technology outside of this
 Compliance with USB 2.0 (Full Speed) finalizing can be enabled or disabled as optional settings product is prohibited without a license from
matching the polarities. Laser diode properties
Checking MP3/WMA/AAC file information  Supports Mass Storage mode* during disc creation in most recording software. MP3/WMA/AAC files cannot be played Emission duration: Continuous Microsoft or an authorized Microsoft subsidiary.
Last programmed track number  Replace all the batteries with new ones when the
Press DISPLAY  repeatedly while playing an * Mass Storage mode is a mode that allows a USB device OPR/BATT indicator  dims.
back. Laser output: Less than 44.6 μW  The BLUETOOTH® word mark and logos are
to become accessible to a host device, enabling file Discs that this unit CANNOT play  The audio files may have inappropriate file (This output is the value measurement at a distance of registered trademarks owned by the Bluetooth
MP3/WMA file on the disc or an MP3/WMA/AAC 200 mm from the objective lens surface on the optical
transfers. Most USB devices support Mass Storage  CD-R/CD-RW other than those recorded in audio extensions. The file extensions supported by this SIG, Inc. and any use of such marks by Sony
file on the USB device. mode.
There is no sound. pick-up block with 7 mm aperture.)
CD format or formats conforming to ISO 9660 unit are as follows: Corporation is under license.
The display changes as follows: Level 1/Level 2 or Joliet  Make sure the appropriate function is selected for Number of channels
Notes on the USB device the music or sound source you want to listen to.  MP3: file extension “.mp3” 2  The N-Mark is a trademark or registered
 Song title ( )*1, 2  When a USB device is connected, the unit reads all the  CD-R/CD-RW of poor recording quality, CD-R/  WMA: file extension “.wma” trademark of NFC Forum, Inc. in the United States
Total playing time* CD-RW with scratches or that is dirty, or CD-R/  Unplug the headphones when listening through Frequency response

files on the device. If there are many folders or files on the
speakers.  AAC: file extension “.m4a,” “.3gp” and “.mp4” 20 Hz  20,000 Hz +1/–2 dB and in other countries.
device, it may take a long time for the unit to finish CD-RW recorded using an incompatible recording
Artist name ( )*1 * “--:--” appears when programming an MP3/WMA  The audio files may have been created in formats Wow and flutter  Android is a trademark of Google LLC.
reading them. device other than MP3/WMA/AAC formats.
disc/USB device or when the total playing time is The sound is noisy. Below measurable limit  Other trademarks and trade names are those of
  Do not connect a USB device to the unit through a USB  CD-R/CD-RW that is unfinalized or finalized
longer than 100 minutes.
hub.  Is someone using a mobile phone or other  The USB storage device uses a file system other BLUETOOTH section their respective owners.
Album name ( )*1 incorrectly
5 Repeat steps 3 and 4 to program additional  With some connected USB devices, after an operation is equipment emitting radio waves near the unit? If than FAT16 or FAT32.* Communication System  ™ and ® marks are omitted in the documents.
 tracks/files. performed, there may be a delay before it is performed by so, move the unit and the BLUETOOTH device  The files are encrypted or protected by passwords. BLUETOOTH Specification Version 2.1 + EDR
Notes on discs
Current file number and playing time*3 6 Press   to start Program Play. this unit. away from such devices. Devices such as mobile Output
 This unit may not support all the functions provided with
 Clean the CD with a cleaning cloth if phones, etc., can affect BLUETOOTH * This unit supports FAT16 and FAT32, but some USB storage BLUETOOTH Specification Power Class 2
To play the same program again, press  .
*1 If the file does not have corresponding ID3, WMA or AAC
tag information, the file name, “NO ARTIST,” and “NO Note that the created program is cleared in the
a connected USB device. the disc is dirty. Wipe the disc from
the center out. If there are scratches,
communication. media may not support both file systems.
For details, refer to the operation manual of the USB
Maximum communication range
Line of sight approx. 10 m (33 feet)*1
For customers in the USA
 The playback order on this unit may differ from the
ALBUM” scroll on the display instead of the song title, following cases: playback order on a connected USB device. dirt or fingerprints on the disc, a A small humming noise is heard from the storage device in question or contact the manufacturer. Frequency band
artist name, and album name.  When you open the CD compartment. tracking error may occur. 2.4 GHz band (2.4000 GHz  2.4835 GHz) Please register this product on line at the following
radio.
*2 The function name is displayed for 2 seconds before the  When you connect another USB device.  Do not use solvents such as Modulation method website.
song title appears. Compatible BLUETOOTH devices  This is not a malfunction. You may hear a small BLUETOOTH device FHSS
 When you turn off the power of the unit in the benzine, thinner, commercially humming noise from the radio depending on the https://www.sony.com/productregistration
*3 The artist name or album name will change to this in a Compatibility requirements for the devices are as Supported BLUETOOTH Profiles*2
CD function. available cleaners or anti-static status of the power supply. There is no sound.
few seconds. follows. Before using a device with this unit, check A2DP (Advanced Audio Distribution Profile) Proper registration will enable us to send you
spray intended for vinyl LPs.
Note that it meets the requirements.  Make sure that this unit is not too far from the AVRCP*3 (Audio/Video Remote Control Profile) periodic mailings about new product, services and
 Do not expose the CD to direct sunlight or heat “NOT IN USED” appears. BLUETOOTH device (or smartphone), or that this other important announcements. Registering your
Checking the connected BLUETOOTH If you try to program 26 tracks/files or more, “FULL” flashes  Devices must conform to BLUETOOTH Standard Supported codec*4
sources such as hot air ducts, or leave it in a car unit is not receiving interference from a wireless
on the display. version 2.1 + EDR.  You pressed an invalid button. SBC (Subband Codec) product will also allow us to contact you in the
device name parked in direct sunlight as there can be a LAN, another 2.4 GHz wireless device, or a *1 The actual range will vary depending on factors such as unlikely event that the product needs adjustment or
 Devices must support A2DP (Advanced Audio considerable rise in temperature inside the car.
Press DISPLAY  while connecting the To display programmed track/file Distribution Profile) and AVRCP (Audio/Video CD/MP3/WMA player microwave oven. obstacles between devices, magnetic fields around a
modification. Thank you.
microwave oven, static electricity, reception sensitivity,
BLUETOOTH device. information Remote Control Profile).  Do not stick paper or a sticker on the CD, or  Check that the BLUETOOTH connection was aerial performance, operating system, application software,
After creating your own program, you can check scratch the surface of the CD. completed properly between this unit and the etc.
 NFC capability (required only when using the NFC The CD player does not play even when a
Checking the radio information information about programmed tracks/files. pairing function of the unit).  After playing, store the CD in its case. CD is in place. BLUETOOTH device (or smartphone). 2
* BLUETOOTH standard profiles provide the specifications for
BLUETOOTH communication between devices.
Press DISPLAY  repeatedly and the display  Place the CD with the label side up.  Perform pairing again (See “Pairing this unit with a
Press DISPLAY  repeatedly while listening to Note on DualDiscs BLUETOOTH device”).
*3 Some operations may not be available depending on the
the radio. changes as follows:  Clean the CD. device.
 A DualDisc is a two sided disc product which  Keep away from metal objects or surfaces. *4 Codec: Audio signal compression and conversion format.
Total number of steps  Last programmed track/
The display changes as follows:
file number and the total playing time*
What is BLUETOOTH wireless mates DVD recorded material on one side with
digital audio material on the other side. However,
 Take out the CD and leave the CD compartment
open for about an hour to dry moisture  Make sure that the BLUETOOTH function is Radio section
Preset number*1, 2  Frequency
* “--:--” appears for MP3/WMA discs and USB devices.
technology? since the audio material side does not conform to condensation. activated on the BLUETOOTH device (or
smartphone).
Frequency range
FM: 87.5 MHz  108 MHz (100 kHz step)
*1 Apreset number is displayed only when you are listening the Compact Disc (CD) standard, playback on this  The CD-R/CD-RW is blank or unfinalized. AM: 530 kHz  1,710 kHz (10 kHz step)
to the preset radio station.
To cancel Program Play BLUETOOTH wireless technology is a short-range product is not guaranteed.  There are no playable MP3/WMA files on the disc. The sound skips or the correspondence Intermediate frequency
*2 The display automatically returns to the frequency display
Press   to stop playback, and then press PLAY wireless technology that enables wireless data  There is a problem with the quality of the CD-R/ distance is short. FM: 128 kHz
after 2 seconds have elapsed.
MODE  repeatedly until “PGM” disappears from communication between digital devices, such as a Music discs encoded with copyright CD-RW, recording device or application software. AM: 45 kHz
computer and digital camera. BLUETOOTH wireless protection technologies  If a device that generates electromagnetic
the display.  Replace all the batteries with new ones when the radiation, such as a wireless LAN, other Antennas
technology operates within a range of about 10 m  This product is designed to playback discs that OPR/BATT indicator  dims. FM: Telescopic antenna
BLUETOOTH device(s), or a microwave oven is
Selecting play mode To delete all tracks/files in the current (33 feet). conform to the Compact Disc (CD) standard. nearby, move away if possible. Or use the device
AM: Built-in ferrite bar antenna
program Connecting two devices as necessary is common, Recently, various music discs encoded with “NO CD” appears when the disc is loaded. Input
and the unit away from such sources.
You can set the unit to play tracks or files repeatedly Stop playback, and then press  . “NO STEP” but some devices can be connected to multiple copyright protection technologies are marketed AUDIO IN
devices at the same time.  No disc is set in the CD compartment. Set a disc.  Remove any obstacle between this unit and the Stereo mini jack
or in random order while a disc/USB device is appears and you can create a new program, by some record companies. Please be aware that
You do not need to use a cable for connection, nor is among those discs, there are some that do not  The CD may have a reading problem. Replace the device or move the device and the unit away from
 (USB) port
stopped. following the procedure “Creating your own disc. the obstacle.
program (Program Play).” it necessary for the devices to face one another, conform to the CD standard and may not be Type A, maximum current 500 mA, USB 2.0 Full Speed
Press PLAY MODE  repeatedly. such is the case with infrared technology. For playable by this product.  The CD may be placed upside down. Place the  Locate this unit and the device as close to each compatible
example, you can use such a device in a bag or disc with the label side up. other as possible.
Output
pocket. On safety  An unplayable disc (DVD, BD, etc.) is loaded.  Re-position this unit.  (headphones) stereo mini jack
Presetting radio stations BLUETOOTH standard is an international standard
 As the laser beam used in the CD player section is
Replace the disc.  Try using the BLUETOOTH device or smartphone in For 16   32  impedance headphones
supported by thousands of companies all over the harmful to eyes, do not attempt to disassemble another position. Supported audio formats
You can store radio stations in the unit’s memory. world, and employed by various companies the casing. Refer servicing to qualified personnel “NO TRACK” appears on the display when Supported bit rates
Each time you press the button, the indication
You can preset up to 30 radio stations, 20 for FM and worldwide. only. the disc is loaded. A connection cannot be established. MP3 (MPEG 1 Audio Layer-3):
changes as follows: 32 kbps  320 kbps, VBR
10 for AM.  No audio files recorded in supported formats, or a  Depending on the device to be connected, it may
Maximum communication range  Should any solid object or liquid fall into the unit, WMA:
 Normal play (None) unplug the unit, and have it checked by qualified file to be played back has an unsupported file require some time to start communication.
1 Press FM/AM  repeatedly to turn on the Maximum communication range may shorten under extension.
48 kbps  192 kbps, VBR
 personnel before operating it any further.  Perform pairing again (See “Pairing this unit with a AAC*:
radio function and select the band “FM” or the following conditions. 8 kbps  320 kbps, VBR
Single repeat ( 1)  Discs with non-standard shapes (e.g., heart, BLUETOOTH device”).
“AM.”  There is an obstacle such as a person, metal, or “DISC ERR” appears when the disc is loaded. * USB function only
 square, star) cannot be played on this unit.
2 Hold down FM/AM  until “AUTO” flashes on wall between the unit and BLUETOOTH device.  The CD may be dirty. Clean the disc. Pairing fails. Sampling frequencies
Attempting to do so may damage the unit. Do not
All repeat ( )  A wireless LAN device is in use near the unit. MP3 (MPEG 1 Audio Layer-3):
the display. use such discs.  The CD may have scratches. Replace the disc.  Bring the BLUETOOTH device closer to the unit. 32/44.1/48 kHz
  A microwave oven is in use near the unit.  The CD may have a reading problem. Replace the  Delete the model name of this unit from the WMA:
Selected folder play ( )*  A device that generates electromagnetic radiation On power sources disc. BLUETOOTH device and perform pairing again 32/44.1/48 kHz
 is in use near the unit.  For AC operation, use the supplied AC power cord;  A blank disc may be set in the CD compartment. (See “Pairing this unit with a BLUETOOTH device”). AAC*:
32/44.1/48 kHz
Selected folder repeat play ( , )*  The unit is placed on a shelf made of steel. do not use any other cord.
* USB function only
 Unplug the unit from the wall outlet if it is not to The sound drops out. Pairing using the NFC function fails.

3 Press ENTER  to store the station. be used for an extended period of time.  Reduce the volume.  Try pairing manually (See “Pairing this unit with a General
Shuffle play ( ) BLUETOOTH device”). Some NFC-compatible Speaker
The stations are stored in memory from lower The unit  When not using the batteries, remove them to  Clean the CD, or replace it if the CD is badly Full range, 8 cm (3 1/4 in) dia., 6 , cone type (2)
 frequencies to higher ones. avoid damage that can be caused by battery damaged. smartphones may not be paired using the NFC
leakage or corrosion. function of this unit, depending on the features or Power output
Program play (PGM)  Place the unit in a location free from vibrations. 2.0 W + 2.0 W (at 6 , 10% harmonic distortion)
specifications of the device.
 If a station cannot be preset  Clean the lens with a commercially available Power requirements
On placement blower.  Move the smartphone over the N-Mark  on the
Program repeat play ( , PGM) automatically unit slowly.
120 V AC, 60 Hz (AC power supply)
 To avoid malfunction, do not leave the unit under  The sound may drop out or noise may be heard 9 V DC (6 R14 (size C) batteries)
You need to preset a station with a weak signal the following conditions. when using a poor quality CD-R/CD-RW or if there  Check that the smartphone meets the Power consumption
* These functions are available only when playing MP3/ manually.
 At high temperatures such as in direct sunlight, is a problem with the recording device or compatibility requirements (See “Compatible 15 W
WMA files on an MP3/WMA disc or MP3/WMA/AAC files
on a USB device.
1 Press FM/AM  repeatedly to select a band. Steel cabinet near a heat source, or under lighting equipment. application software. smartphones”). 0.9 W (during standby mode)
2 Tune to the desired station.  In a car with the windows closed (especially in Battery Life*1, *2
summer). Starting playback takes more time than Radio Playback of CD
Playing tracks/files repeatedly (Repeat 3 Hold down ENTER  until “FM-xx” or “AM-xx” Optimal performance Approx. 9 hours
 Do not place anything within 10 mm (13/32 in) of usual.
Play) flashes on the display. Playback of USB device
Limited performance the rear of the cabinet.  The following discs take a longer time to start The sound is weak or reception is poor. Approx. 11 hours (at 100 mA load)
You can set the unit to repeatedly play CD-DA tracks (Example: FM)  Near objects susceptible to magnetism Approx. 3 hours (at 500 mA load)
playback.  Replace all the batteries with new ones.
on an audio CD, MP3/WMA files on a CD-R/CD-RW (watches, credit cards).  A disc recorded with a complicated tree
FM reception
 Move the unit away from nearby TVs. Approx. 26 hours
disc, or MP3/WMA/AAC files on a USB device in  Subject to heavy vibration. structure.
Interference from other devices  For FM reception, extend the antenna to its full BLUETOOTH
normal and program play modes.
Because BLUETOOTH devices and wireless LAN  A disc that has many folders or non-MP3/WMA length, and reorient it for best FM reception. For Approx. 13 hours
1 Press CD  or USB  to turn on the CD or (IEEE802.11b/g/n) use the same frequency, On operation files. AM reception, reorient the unit itself to find the *1 Measured by Sony standards. The actual battery life
microwave interference may occur and resulting in  If the unit is brought directly from a cold to a best reception.
USB function. 4 Press PRESET + or   until the preset
communication speed deterioration, noise, or invalid warm location, or is placed in a very damp room,
may vary depending on the circumstances of the unit
2 Proceed as follows. number for the station you want flashes on USB device  If you are in a building, listen near a window. or operating conditions.
connection if the unit is used near a wireless LAN moisture may condense on the lens inside the CD *2 When using Sony alkaline batteries.
player section. Should this occur, the unit will not  If a mobile phone is placed close to the unit, a
the display. device. In such a case, perform the following. The USB device does not work properly. loud noise may be heard from the unit. Keep the Dimensions
To repeat Do this operate properly. In this case, remove the CD and Approx. 320 mm × 133 mm × 215 mm (12 5/8 in × 5 1/4 in ×
5 Press ENTER  to store the station.  Use the unit at least 10 m (33 feet) away from the  If you connect an incompatible USB device, the phone away from the unit.
A single track/ 1 Press PLAY MODE  wireless LAN device. wait about an hour for the moisture to evaporate. 8 1/2 in) (W/H/D) (incl. projecting parts)
If another station is already assigned to the following problems may occur.
file repeatedly until “ 1” appears. Mass
selected preset number, that station is replaced  If the unit is used within 10 m (33 feet) of a  The USB device is not recognized. The TV picture is unstable.
2 Press  or   to select On handling the unit Approx. 2.3 kg (5 lb 1 1/8 oz) (incl. batteries)
by the new one. wireless LAN device, turn off the wireless LAN  File or folder names are not displayed on this  If you are listening to an FM program near a TV
a track/file that you want to  Do not leave the CD compartment open to avoid Supplied accessories
device. unit. with an indoor antenna, move the unit away from
repeat. Tip dust and debris contamination. AC power cord (1)
3 Press  . The preset radio stations remain in the unit’s memory even
 Use the BLUETOOTH device as close to the unit as  Playback is not possible. the TV.
in the following situations. possible.  The sound skips. Design and specifications are subject to change without
All tracks/files 1 Press PLAY MODE  On cleaning the cabinet notice.
The AC power cord is unplugged.  There is noise. After trying the suggested remedies, if the problem
repeatedly until “ ” appears. The batteries are removed. Interference to other devices  Clean the cabinet, panel and controls using a soft
2 Press  . cloth slightly moistened with a mild detergent  The sound output is distorted. persists, unplug the AC power cord or remove all the
Microwaves emitting from a BLUETOOTH device may
solution. Do not use any type of abrasive pad, batteries. After all the indications on the display
A selected folder 1 Press PLAY MODE  affect the operation of electronic medical devices.
disappear, plug in the AC power cord again, or
Turn off the unit and other BLUETOOTH devices in scouring powder, or solvent, such as alcohol or “OVER CURRENT” appears and the unit
on an MP3/WMA repeatedly until “ ” and “ ”
disc or USB appear. Listening to preset radio stations the following locations, as it may cause an accident. benzine. turns off automatically. re-insert the batteries. If the problem persists,
consult your nearest Sony dealer.
device 2 Select a folder by pressing  +  where inflammable gas is present, in a hospital,  An abnormal level has been detected in the
or  . 1 Press FM/AM  repeatedly to turn on the train, airplane, or a gas station
If you have any questions or problems concerning electrical current from the  (USB) port . In this
3 Press  . radio function and select the band “FM” or your unit, consult your nearest Sony dealer. case, remove the USB device from the  (USB) port
 near automatic doors or a fire alarm  and reconnect the USB device, and then turn
Programmed 1 Program tracks/files (see “AM.”
Notes on the unit again. If this problem persists after
tracks/files “Creating your own program 2 Press PRESET + or   to select a stored turning on the power of the unit, contact your
(Program Play)”).  To be able to use the BLUETOOTH function, the
preset number for the desired radio station. BLUETOOTH device to be connected requires the same nearest Sony dealer.
2 Press PLAY MODE  until profile as the unit’s.
“PGM” and “ ” appear on the Note also that even if the same profile exists, devices may There is no sound.
display. vary in function depending on their specifications.
3 Press  . Using the Sleep Timer  Due to the characteristic of BLUETOOTH wireless
 The USB device may be connected incorrectly.
Turn off the unit and reconnect the USB device.
technology, the sound played on the unit is slightly
Then turn on the unit.
You can set the unit to turn off automatically after a delayed from the sound played on the BLUETOOTH device
To cancel Repeat Play during listening to the music.
Press   to stop playback, and then press PLAY set time has elapsed.
There is noise, skipping, or distorted sound.
 This unit supports security capabilities that comply with
MODE  repeatedly until “ ” (or “ 1”) disappears
from the display.
1 Press SLEEP . the BLUETOOTH standard to provide a secure connection  Turn off the unit and reconnect the USB device.
when the BLUETOOTH wireless technology is used, but Then turn on the unit again.
The default setting (“90”) appears and the
security may not be enough depending on the setting. Be
“SLEEP” indicator lights up on the display.  The music data itself contains noise, or the sound
Playing tracks/files in random order careful when communicating using BLUETOOTH wireless
is distorted. Noise may have entered during the
2 Press SLEEP  repeatedly to select the technology.
creation of audio files. Try re‑creating audio files
(Shuffle Play)
desired setting.  We do not take any responsibility for the leakage of and use them to play on this unit.
You can set the unit to play CD-DA tracks on an information during BLUETOOTH communication.
audio CD, MP3/WMA files on a CD-R/CD-RW disc or  A device featuring the BLUETOOTH function is required to
MP3/WMA/AAC files on a USB device in random conform to the BLUETOOTH standard specified by
The USB device cannot be connected to the
order. Bluetooth SIG, and be authenticated. Even if the  (USB) port .
connected device conforms to the above mentioned  The connector on the USB device or the USB cable
1 Press CD  or USB  to turn on the CD or BLUETOOTH standard, some devices may not be is being inserted backwards. Insert it to the 
USB function. Each time you press the button, the duration (in connected or work correctly, depending on the features or (USB) port  in the correct direction.
minutes) changes on the display, and the specifications of the device.
2 Press PLAY MODE  repeatedly until “ ”
selected setting is confirmed automatically after  Noise or sound skips may occur depending on the “READING” is displayed for an extended
appears on the display. about 4 seconds. BLUETOOTH device connected with the unit, the
time, or it takes a long time before playback
3 Press   to start Shuffle Play. communication environment or the usage environment.
starts.
Tip
To cancel Shuffle Play You can check the time left until the unit turns off by  The reading process can take a long time in the
pressing SLEEP  again after setting the sleep timer. following cases:
Press   to stop playback, and then press PLAY
MODE  repeatedly until “ ” disappears from the  There are many folders or files on the USB
display. device.

Tip Connecting optional components  The file structure is complex.

 The memory is almost full.
During Shuffle Play, you cannot select the previous track/file
by pressing  . You can enjoy the sound from an optional  The internal memory is fragmented.
component, such as a portable digital music player, To avoid the above problems, we recommend that
through the speakers of this unit. you adhere to the following guidelines:
Creating your own program (Program
Be sure to turn off the power of each component  Keep the total number of folders on a USB
Play) before making any connections. device to 100 or less.
You can arrange the playing order of up to 25 For details, refer to the instruction manual of the  Keep the total number of files per folder to 100
tracks/files on a disc/USB device. or less.
component to be connected.
1 Press CD  or USB  to turn on the CD or
USB function.
1 Connect the AUDIO IN jack  to the line Erroneous display
output jack of the portable digital music  The data stored on the USB device may be
2 Press PLAY MODE  repeatedly until “PGM”
corrupted. Send the music data to the USB device
player or other component using an audio
appears on the display. again.
connection cable (not supplied).
3 Press  or   to select a track/file.  This unit can display only numbers and letters of
When you want to specify a folder that contains
2 Turn the connected component on.
the alphabet. Other characters will not be
MP3/WMA/AAC files, press  + or   first to 3 Press AUDIO IN  and start playing sound on displayed correctly.
select a folder, and then press  or   to the connected component.
select a file. The sound from the connected component is “REC ERROR” appears.
output from the speakers.  An error occurred during transferring. Turn off the
To connect the unit to a TV or video recorder/ unit and remove the USB device from the unit.
player, use an extension cable (not supplied) with Then check the following:
a stereo-mini jack on one end and two phono  Check the remaining storage space on the USB
plugs on the other end. device. If there is insufficient space for the
transferring, delete any unnecessary files or
folders.
 Check that the data to be transferred is not
corrupted.
 Check that the file format to be transferred is
compatible with the unit.
If the message still persists, contact your nearest
Sony dealer.