Nigeria Oil and Gas Industry Content Development Act (NOGICD), 2010

SCHEDULE

Instruction to Users:
- This Sheet contains Schedule A of the NOGICD Act, 2010. Please refer to this as a guide for Nigerian Content (NC) targets where
Certificate (NCCC) has not been signed.
- Where the description of your activity is not on this list, please include the Description and Measured Unit

ITEM No.
1

3
4

6
7

9
10

11
12

13
14
15

16
17

18
 Nigeria Oil and Gas Industry Content Development Act (NOGICD), 2010
SCHEDULE

ruction to Users:
is Sheet contains Schedule A of the NOGICD Act, 2010. Please refer to this as a guide for Nigerian Content (NC) targets where a Nigerian Conten
ificate (NCCC) has not been signed.
here the description of your activity is not on this list, please include the Description and Measured Unit

DESCRIPTION
FEED AND DETAILED ENGINEERING AND OTHER ENGINEERING SERVICE
FEED and Detailed engineering on Onshore facilities
FEED and Detailed engineering on Offshore facilities
Shallow Water
FEED and Detailed engineering on LNG Facility
FEED and Detailed engineering on Gas gathering Facilities
FEED and Detailed engineering on Deep offshore facilities - Hull and topside modules
FEED and Detailed engineering on Deep offshore Floating concrete structure

FABRICATION AND CONSTRUCTION

Terminal/Oil Movement Systems
Drilling Modules/Packages
Piles, Anchors, Buoys, Jackets, Bridges, Flare Booms, Storage Tanks, Pressure Vessels
Umbilical
Topside module (process modules and storage Modules
Accommodation module
Subsea systems
Pipeline System
Risers
Utilities module / Packages

MATERIALS & PROCUREMENT

Steel plates, Flat sheets, sections
Steel pipes
Low Voltage Cables
High Voltage Cables
Valves
Drilling mud - Baryte, Bentonite
Cement (Portland)
Cement (Hydraulic)
Heat exchangers
Steel ropes
Protective paints
Glass Reinforced Epoxy (GRE) pipes
Well & Drilling Services / Petroleum Technology
Reservoir services
Well completion services (permanent gauges & intelligent wells)
Wire line services (electric open holes, electric cased hole, slickline)
Logging While Drilling (LWD) services
Measurement While Drilling (MWD) (direction and inclination / Gamma ray)
Production drilling service
Performance services (T&P)
2D Seismic data acquisition services
Well Overhauling/Stimulation Services
Wellhead Services
Directional Surveying Services
Cutting Injections/Cutting Disposal Services
Recutting Inspection Services
Cased Hole Logging Services (Gyro, Perforation, Gauges, Gyro, PLT, Perforation, PLT, Gauges)
Well Wash Services
Cement services
Coiled Tubing Services
Pumping Services
Fluid/Bottom Hole Sampling Services
OCTG Services (Cleaning, hardbanding, recutting, rethreading, storage)
Well Crisis Management Services
Directional Drilling Services
Other Drilling Services
Petrophysical Interpretation Services

Extended Well Test/Early Production Services including Provision of Floating or Jackup Production Unit
Provision of Catering, Cleaning, Office and Security Service at Location/Platform
Rental of Drill Pipe
Electric Open Hole
Electric Ceased Holes
Slickline
Well Head Safety Panels

CHEMICAL
Drilling, Process, Maintenance

Research & Development Services

Engineering Studies - Reservoir, Facilities, Drilling etc.
Geological and Geophysical Services
Safety and Environmental Studies
Local Materials Substitution studies
Exploration, Subsurface, Petroleum Engineering & Seismic
3D Seismic data acquisition services
4D Seismic data processing services
2D Seismic data processing services
Geophysical interpretation services
Geological evaluation services (Organic Geochemistry, Petrology, Digenesis, Giostratigraphy, Fluid
Characterization, PVT, Core Analysis, Flooding)
Mud logging services
Coring services
Well testing service
Drilling rigs (swamp)
Drilling Rigs (Semi submersibles/Jack ups/Others)
Drilling Rigs (Land)
Work-over Rigs (Swamp)
Snubbing Services
Liner Float, Hangers and Running Equipment Services
Field Development Plan
2D Seismic Data Interpretation Services
3D Seismic Data Interpretation Services
4D Seismic Data Interpretation Services
Drilling rigs (land)

Transportation/Supply/Disposal Services
Tugs / Remotely Operated Vehicle (ROV) support / diving support vessels
Barges
Accommodation platforms / vessels
Disposal / distribution and waste transport services
Rental of Cranes and Special Vehicles
Freight Forwarding/Logistics Management Services
Supply Base/Warehouse/Storage Services
Truck Package/Product Transportation Services

Health, Safety & Environment

Site clean up service
Pollution control
Waste Water Treatment Services
Fire and Gas Protection System Services
Ventilation/Heating/Sanitary Services
Waste Disposal/Drainage Services
Industrial Cleaning Services
Disposal/Distribution and Waste Transport Services etc.
Safety/Protection/Security/firefighting System Services
Preservation of Mechanical and Electrical Components Services
Equipment brokerage services
Temporary Accommodation/Camp Services
Catering Services
Cleaning and Laundry Services
Security Services
Medical Services
Equipment Brokerage Services
Other Supporting Services
Pollution Control

INFORMATION SYSTEMS/INFORMATION TECHNOLOGY/COMMUNICATION SERVICES

Network Installation/Support Services
Software Development and Support Services
Computer Based Modeling Services
Computer Based Simulation/Training Programs Services
CAL/CAP Services
Hardware Installation Support Services
Operating System Installation/Support Services
User Support/Help Desk Services
Library Services
IT Management Consultancy Services
Data Management Services
General IS/IT Consultancy Services
Telecommunication Installation/Support Services
Data and Message transmitting Services
Rental of Telecommunication Lines
Telecommunication Subscription Services
Public Address System Services
Other Information Systems (IS)/Information Technology (IT) Services

MARINE, OPERATIONS & LOGISTICS SERVICES

Telecommunication Services
Supply of crew men for domestic coastal services
Diving/ROV/Submersible operations
Hook-up and Commissioning including Marine Installation Services
Dredging Services
Gravel and Rock Dumping Services
Floating Storage Units (FSU)
Subsea Pipeline Protection Services
Installation of Subsea Packages
Mooring System Services
Other Installation Services
Ship Chandler Services
Moving Services
Supply Vessels
Stand-by Vessels
Domestic Clearing of Cargos
Bunkering Services
Marine Insurance
Marine Consulting
Marine Logistics

FINANCE & INSURANCE

General Banking Services
Monetary Intermediation Services
Credit Granting Services
Security Broking and Fund Management Services
Financial Management Consultancy Services
Accounting Services
Auditing Service
Life Insurance Services
Pension Funding Services
Non-Life Insurance Services
Insurance Broking Services

INSTALLATION, HOOKUP & COMMISSIONING

Surface treatment, sandblasting, painting, coating & fire proofing services
Subsea construction services
Hookup & commissioning including marine installation services
Installation of subsea packages
Electrical/Instrument Services
Insulation Services
Diving/ROV/Submersible operations
Subsea Construction Services
Pipe Cutting and Bending Services
Catalyst Handling/Regeneration Services
Bolt Tensioning Services
Rope Access Services
Welding and Jointing Services
Maintenance and Modification of Pumps and Rotating Equipment
Heat Treating and Demagnetising Services
Tank Bottom Sludge Treatment Services
Valve Management Services including testing and repair
Crane Management Services
Other Construction/Maintenance Services
Pipe laying/Cable Laying Services
Trenching and Excavation Services
Cranes/Crane Barges/Heavy Lift Vessels
Marine Services
Subsea Services
Well Services
Cutting Services
Site Services
Other Decommissioning and Abandonment Services
Service station tank maintenance / services
Electrical/Electronic System Integration
Process Testing including Helium and Nitrogen Services

INSPECTION, TESTING & CERTIFICATION

Material Technology/Anti-Corrosion/Surface Protection Services
Non-Destructive Testing (NDT) Services
Pipeline Flushing, External/Internal Inspection, Pigging Services
Surface Treatment Inspection Services
Pressure Testing Services
Instrument Testing/Calibration Services
Load Testing Services
Diving/ROV operations
Laboratory Testing Services
Dimensional Control/Verification Services
Third Party Measurement Services
Other Inspection Services
Quality Management Systems Certificate
Environmental Management Systems Certificate
Safety Management System Certification
Information Security Management Systems Certificate
Certification of Welders
Certification by NDT personnel
Certification of machinery & equipment
Certification on NDT Personnel
Certificate of Machinery
Pollution and Pollution Control Works and Consultancy
Certification of Cranes and Lifting Appliances
Certification of Pressurized Equipment
Evaluation and Certification of Software and Electronics (IT)
Notified Body for Machinery
Notified Body for simple Pressure Vessels
Notified Body for Telecommunication Terminal Equipment
Notified Body for Medical Equipment
Notified Body for Personal Protection Equipment
Notified Body for Lifts
Notified Body for Pressure Containing Equipment
Integrity Management Services
Other Certification Services
Other Testing Services

PROJECT MANAGEMENT / CONSULTING SERVICES

Construction Management and Supervision Services
Project Administration services / Project Management
Quality Assurance QA / QC Consultancy
Safety, Health and Environment Consultancy
Risk Analysis Consultancy
Personnel/Training System Consultancy (For training courses select 3.99.13)
Legal Consultancy
Cost and Planning Consultancy
Material Administration Consultancy
Technical Documentation/Document Control Consultancy
Advertising/Public Affairs/Public Relations Consultancy
Marketing and Market Research Consultancy
Translation and Manual Writing Consultancy
Welding and Jointing Consultancy
Warranty Surveyors
Third Party Evaluation/Verification Consultancy
Energy Conservation Consultancy
Decommissioning and Abandonment Consultancy
Meteorological Consultancy
Staff Search/Selection Consultancy
Sub-surface Consultancy (Geological, Geophysical, Reservoir)
Design Consultancy (Industrial Design, Web Design etc.)
Marine Consultancy
Subsea Consultancy
Career/Outplacement Consultancy
General Management and Business Development Consultancy
Other Consultancy Services
Pollution and Pollution Control Works and Consultancy

SURVEYING/POSITIONING SERVICES
Soil Investigation Services
Geotechnical Services
Geophysical and Hydrographic Site Survey
Oceanographic Services
Rig Positioning Services
Photogrammetric Surveying Services
Chart and Map Production Services
Rental of Surveying/Positioning Equipment Services
Survey and Positioning Support Services
Aeromagnetic Survey

MODIFICATION & MAINTENANCE

Car Wash Equipment Maintenance/Services
Canopy Equipment Maintenance/Services
Dredging services
Signs and Accessories Maintenance/Services
Services Station Pumps Maintenance/Services
Payment Terminal Maintenance/Services
Service Station Tanks Maintenance/Services
Subsea systems
Pipeline Systems
Risers
Umbilical
Terminal/Oil Movement Systems
Accommodation/Office/Workshop/Storage Modules
Process Modules/Packages
Utilities Modules/Packages
Drilling Modules/Packages

Buildings including Services Stations Engineering Modification and Maintenance Services for a Site/Platform

SHIPPING
Domestic coastal carriage of petroleum products
Tow of oil & gas infrastructure & vessels conveying oil & gas products from or to any port or point in Nigerian
waters
Supply of very large crude carriers (VLCC)
OGICD), 2010

NC) targets where a Nigerian Content Compliance

NC% MEASURED UNIT

90% Man-Hour
90% Man-Hour
90% Man-Hour
50% Man-Hour
90% Man-Hour
80% Man-Hour
80% Man-Hour

80% Volume
75% Tonnage
80% Tonnage
60% Tonnage
50% Tonnage
70% Tonnage
60% Tonnage
100% Tonnage
100% Tonnage
50% Tonnage

75% Tonnage
55% Tonnage
90% Length
45% Length
60% Number
60% Tonnage
80% Tonnage
60% Tonnage
50% Number
60% Tonnage
60% Liters
60% Tonnage
75% Spend
80% Spend
45% Spend
60% Man-Hour
70% Man-Hour
85% Man-Hour
90% Length
85% Man-Hour
85% Man-Hour
85% Man-Hour
100% Man-Hour
100% Man-Hour
85% Man-Hour
90% Man-Hour
70% Man-Hour
75% Man-Hour
75% Man-Hour
95% Man-Hour
80% Man-Hour
95% Man-Hour
90% Man-Hour
90% Man-Hour
80% Man-Hour
75% Volume/Man-Hour

50% Spend
80% Spend
75% Spend
45% Spend
100% Spend
100% Spend
100% Spend

90% Spend

60% Spend
80% Spend
75% Spend
75% Spend
100% Spend
55% Spend
100% Spend
90% Spend
80% Spend
90% Spend
90% Spend
55% Spend
60% Man-Hour
55% Man-Hour
70% Man-Hour
70% Spend
80% Spend
55% Spend
100% Spend
100% Spend
100% Spend
55% Spend
70% Man-Hour

65% Spend
95% Spend
90% Spend
100% Spend
75% Spend
65% Spend
70% Spend
100% Spend

100% Man-Hour
45% Spend
65% Man-Hour
50% Man-Hour
85% Man-Hour
100% Man-Hour
100% Man-Hour
100% Spend
90% Man-Hour
95% Man-Hour
75% Spend
 80% Spend
100% Spend
100% Spend
95% Spend
60% Spend
75% Spend
85% Spend
90% Man-Hour/Spend

CES
85% Spend
45% Spend
51% Spend
51% Spend
51% Spend
50% Spend
50% Spend
60% Spend
70% Spend
50% Spend
50% Spend
50% Spend
60% Spend
60% Spend
75% Spend
85% Spend
95% Spend
75% Spend

90% Man-Hour
80% Man-Hour
70% Man-Hour
75% Man-Hour
55% Man-Hour
65% Man-Hour
45% Man-Hour
55% Man-Hour
60% Man-Hour
50% Man-Hour
85% Man-Hour
90% Man-Hour
100% Man-Hour/Spend
45% Man-Hour/Spend
55% Spend
30% Spend
60% Spend
40% Spend
40% Spend
30% Spend

100% Usage
70% Usage
50% Loan Amount
100% Spend
70% Spend
70% Man-hours
100% Spend
100% Spend
100% Spend
70% Spend
100% Spend

80% Man-Hour
45% Man-Hour
75% Man-Hour
45% Man-Hour
45% Man-Hour
50% Man-Hour
75% Man-Hour
45% Man-Hour
100% Man-Hour
85% Man-Hour
75% Man-Hour
70% Man-Hour
60% Man-Hour
65% Man-Hour
80% Man-Hour
85% Man-Hour
85% Man-Hour
80% Man-Hour/Rate
80% Man-Hour/Tonnage Rate
50% Man-Hour
100% Man-Hour
100% Man-Hour
65% Man-Hour/Spend
45% Man-Hour/Spend
70% Man-Hour/Spend
75% Man-Hour/Spend
85% Man-Hour/Spend
90% Man-Hour/Spend
75% Spend
55% Spend
65% Spend

85% Man-Hour
60% Man-Hour
85% Man-Hour/Rate
90% Man-Hour
90% Man-Hour
85% Man-Hour
75% Man-Hour
65% Man-Hour
55% Man-Hour
45% Man-Hour
45% Man-Hour
45% Man-Hour
55% Nos. of Certificate Obtained
45% Nos.
45% Nos.
45% Nos.
50% Nos.
45% Man-Hour
45% Numbers
50% Nos.
50% Nos.
65% Spend
45% Nos.
45% Nos.
45% Nos.
45% Nos.
45% Nos.
45% Nos.
50% Nos.
45% Nos.
50% Nos.
45% Nos.
50% Nos.
50% Nos.
49% Nos.

80% Man-Hour
80% Man-Hour
45% Man-Hour
45% Man-Hour
45% Man-Hour
45% Man-Hour
50% Contracts
75% Man-Hour
75% Man-Hour
85% Man-Hour
80% Man-Hour
75% Man-Hour
45% Man-Hour
45% Man-Hour
45% Man-Hour
50% Spend
65% Spend
90% Spend
55% Spend
80% Spend
90% Spend
85% Man-Hour
50% Spend
45% Spend
70% Spend
80% Spend
55% Spend
65% Spend

80% Spend
60% Spend
100% Spend
60% Spend
65% Spend
45% Spend
45% Spend
45% Spend
75% Spend
45% Area

90% Spend
90% Spend
55% Spend
80% Spend
65% Spend
80% Spend
75% Spend
45% Spend
60% Spend
49% Tonnage
51% Tonnage
70% Volume
80% Spend
65% Tonnage
80% Tonnage
70% Tonnage

90% N/A

60% Spend

90% Spend
90% Spend
 Name of Company :
Registered Address :
Period of Submission :
Project Title/No :
Client :
Project Start Date:
Project Completion Date:
NCDF 1% Remittance & Date:

Instruction to Users:
- This Sheet is used to obtain a General Overview of the project. Please note that all fields are mandatory
- Bullet points may be used to provide information on Scope
- Filling out your Project Details at the head of this sheet populates the information for all the other sheets

List of Contractor(s)
 Sample
123, Sample, Lagos
Quarter 4 Sample
Sample
Sample
The contract effective start date (CED)
Company’s stewardship date
Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

General Overview of the project. Please note that all fields are mandatory
rovide information on Scope
s at the head of this sheet populates the information for all the other sheets

GENERAL OVERVIEW

Project Scope
Main Scope of Work (Provide a description of scope in
the contract)
L OVERVIEW

Project NC Scope Project non-NC Scope

(Provide a description of the NC (Provide a description of the non-NC Project End
Project Start Date
components in contract according to components in contract according to Date
the main/critical items) the main/critical items)
 NCCC Approval Date
(Date of NCDMB
endorsement of Project
NCCC)
Instruction to Users:
- This Sheet is used to obtain information on the Nigerian Content percentage planned for each aspect of the project (based on cont
- Please edit the details under the Description column to match your contractual Scope of Work
- If your Unit of Measurement (UoM) is not in the drop down menu please select other and explain the remarks column

WORK BREAKDOWN

No. Description Quantity

1 MOBILIZATION

(a) Engineering
(b) Procurement
(c) Equipment (Crane, Truck or Service Rig etc.)
(d) Transportation (Plant, Equipment and Materials)
(e) Transportation of Personnel
(f) Security
(g) Facilities and Infrastructure (including Site and Camp)

2 PROJECT MANAGEMENT
(a) Project & Site management
(b) Office & Field Personnel
(c) Legal / Finance

3 DESIGN & ENGINEERING

1) Basic Engineering
(a) Topographical & Geotechnical Surveys
(b) Soil Investigation and Report
(c) Process review
2) Detail Engineering
(a) Mech, Civil, Electrical, etc.
3) Field Engineering
(a) Field Method Engineering
(b) Well Casting Design
e.t.c
Instruction to Users:
- This Sheet is used to obtain information on the Nigerian Content percentage planned for each aspect of the project (based on cont
- Please edit the details under the Description column to match your contractual Scope of Work
- If your Unit of Measurement (UoM) is not in the drop down menu please select other and explain the remarks column

WORK BREAKDOWN

No. Description Quantity

4 FABRICATION

(a) Civil works (concrete works, earth moving, buildings, dredging,

foundations, marine and shore protection, fencing, re-vegetation, roads)

(b) Structural / Mechanical fabrication assembling and erection works

(c) Hull / L/Q
(d) Fabrication of Topsides Modules
(e) Integration of Modules into Hull
(f) Hook-up & Outfitting
(g) Fixed Platforms
(h) Steel Structures (Piles, Anchors, Etc.)
(i) Process Equip
(j) Pressure Vessels
(k) Storage Tanks
(l) FPSO Integration
(m) Painting, Coating and Insulation
(n) Electrical and Instrumentation
(o) Filling of inert, purging, preservation
Others

5 PROCUREMENT
(a)   Materials
(b)   Procurement Services
(c)   Local Transport
(d)   Custom Clearing
(e)   Fixed Platforms
(f)    Steel Structures (Piles, Anchors, Etc.)
(g)   Process Equip
(h)   Pressure Vessels
(i)     Storage Tanks
(j)     FPSO Integration
(k)    Drilling Equip
(l)     Compressors & Accessories
Instruction to Users:
- This Sheet is used to obtain information on the Nigerian Content percentage planned for each aspect of the project (based on cont
- Please edit the details under the Description column to match your contractual Scope of Work
- If your Unit of Measurement (UoM) is not in the drop down menu please select other and explain the remarks column

WORK BREAKDOWN

No. Description Quantity

(m)  Pumps & Accessories

(n)   Electrical Equipment & Materials
(o)   Instrumentation & Process Control Equipment
(p)   Other Mechanical Equip.
(q)   Pipes / Tubes / Hoses And Fittings
(r)    Valves And Accessories
(s)    Steel / Metal Materials
(t)     Non-Metal Materials (Plastics, Composites)
(u)   Automobiles And Associated Equipment
(v)    Chemical / Oils / Paints
(w)   Civil Bulk / Building Materials
(x)    Other Products / Equipment And Materials

6 CONSTRUCTION AND INSTALLATION

(a) Direct & Indirect Manpower
(b) Construction Equipment
(c) Fuel & Lubricants
(d) Camp Running Cost
(e) Catering & Accommodation
(f) Security Service
(g) NDT
(h) External Coating
(i) Concrete Coating

7 SERVICES
(a)   Seismic Data Processing
(b)   Reservoir Management Services
(c)   Calibration Services
(d)   Construction Services
(e)   Consultancy Services
(f)    Diving Services
(g)   Dredging Services
(h)   Drilling Services
(i)    Equip Supply Services
Instruction to Users:
- This Sheet is used to obtain information on the Nigerian Content percentage planned for each aspect of the project (based on cont
- Please edit the details under the Description column to match your contractual Scope of Work
- If your Unit of Measurement (UoM) is not in the drop down menu please select other and explain the remarks column

WORK BREAKDOWN

No. Description Quantity

(j)    Exploration Services

(k)   Laboratory Services
(l)    Marine Surveys
(m)  Marine/Trspt Services
(n)   Supporting Services
(o)   Other Services (Specify)

8 EQUIPMENT
Service Equipment
Completion Equipment

9 PRE-COMMISSIONING & COMMISSIONING

(a) Direct & Indirect Manpower
(b) Construction Equipment

10 DEMOBILIZATION
(a) Construction Equipment
(b) Transportation
(c) Site & Camp Facilities

11 ANY OTHER AREAS

h aspect of the project (based on contractual Work Breakdown Structure)
k
plain the remarks column

WORK BREAKDOWN

Unit of Nigerian Content Nigerian Content

Contract Value
Measurement (%) as in Value Remarks
F$
(UoM) Contract F$
h aspect of the project (based on contractual Work Breakdown Structure)
k
plain the remarks column

WORK BREAKDOWN

Unit of Nigerian Content Nigerian Content

Contract Value
Measurement (%) as in Value Remarks
F$
(UoM) Contract F$
h aspect of the project (based on contractual Work Breakdown Structure)
k
plain the remarks column

WORK BREAKDOWN

Unit of Nigerian Content Nigerian Content

Contract Value
Measurement (%) as in Value Remarks
F$
(UoM) Contract F$
h aspect of the project (based on contractual Work Breakdown Structure)
k
plain the remarks column

WORK BREAKDOWN

Unit of Nigerian Content Nigerian Content

Contract Value
Measurement (%) as in Value Remarks
F$
(UoM) Contract F$
 Name of Company : Sample
Registered Address : 123, Sample, Lagos
Period of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
Project Completion Date: Company’s stewardship date
F 1% Remittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users:
- This Activity Breakdown Sheet is used to obtain information on the initial/planned Contract and Nigerian Content value at the sta
- Please also provide information on the cumulative value of work done (VOWD) and Nigerian Content value achieved to date

PROJECT ACTIVITIES

PLAN

Main Scope of Work CONTRACT VALUE NC VALUE

F US $ F US $
Scope 1
Scope 2
Scope 3
Scope 4
Scope 5
Scope 6
Scope 7
Scope 8
Scope 9
Scope 10
Scope 11
ny (Project Start to Date)

and Nigerian Content value at the start of the project

n Content value achieved to date

IES

ACTUAL (Up to XX-XX-XXXX)

Value of Work Done NC
(as of XX-XX-XXXX) (as of XX-XX-XXXX)
F US $ F US $

`
 Company : Sample
ed Address : 123, Sample, Lagos
Submission : Quarter 4 Sample
ct Title/No : Sample
Client : Sample
t Start Date: The contract effective start date (CED)
letion Date: Company’s stewardship date
ce & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users:
- This Sheet is used to obtain information on Manpower working on the project
- Please provide periodic information on all personnel Headcount, Man-hours and Spend on Man-hours

Personnel As at Dec 2010 As at Dec 2011 As at Dec 2012

Permanent Personnel
Contract Personnel
Expatriates
Permanent Personnel
Contract Personnel
Personnel (Others/HCDI)
Nigerians
Permanent Personnel
Contract Personnel
Total Personnel

Man-hours As at Dec 2010 As at Dec 2011 As at Dec 2012

Permanent Personnel
Contract Personnel
S/Total Expatriates
Permanent Personnel
Contract Personnel
Personnel (Others/HCDI)
S/Total Nigerians
Permanent Personnel
Contract Personnel

Total Man-hours

Man-hours - Spend As at Dec 2010 As at Dec 2011 As at Dec 2012

Permanent Personnel
Contract Personnel
S/Total Expatriates
Permanent Personnel
Contract Personnel
Personnel (Others/HCDI)
S/Total Nigerians
Permanent Personnel
Contract Personnel

Total Man-hours Spend

ect Start to Date)

oject
urs and Spend on Man-hours

MAN

As at Dec 2013 As at Dec 2014 As at Dec 2015 As at Dec 2016 As at Dec 2017 As at Dec 2018

As at Dec 2013 As at Dec 2014 As at Dec 2015 As at Dec 2016 As at Dec 2017 As at Dec 2018
As at Dec 2013 As at Dec 2014 As at Dec 2015 As at Dec 2016 As at Dec 2017 As at Dec 2018
 MANPOWER

Jan-19 Feb-19 Mar-19 Apr-19 May-19 Jun-19

Jan-19 Feb-19 Mar-19 Apr-19 May-19 Jun-19

Jan-19 Feb-19 Mar-19 Apr-19 May-19 Jun-19
 AVERAGE
Jul-19 Aug-19 Sep-19 Oct-19 Nov-19 Dec-19
2019
-
-

-
-
-

-
-

TOTAL
Jul-19 Aug-19 Sep-19 Oct-19 Nov-19 Dec-19
2019
 TOTAL
Jul-19 Aug-19 Sep-19 Oct-19 Nov-19 Dec-19
2019
 TOTAL
AVERAGE
-
-

-
-
-
-

TOTAL
PROJECT
 TOTAL
PROJECT
 Name of Company : Sample
Registered Address : 123, Sample, Lagos
Period of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
Project Completion Date: Company’s stewardship date
F 1% Remittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users:
- This Sheet is used to obtain information on Engineering Scope, Man-hours and Spend
- All fields are mandatory. Bullet points may be used to provide information on Scope
ENGINEERING
Scope
Contractor Description of Project Engineering Scope
S/No
1
2
3
4
5
6
7
8
9
10
11
12

Man-Hours

Total Project
S/No Contractor
Engineering Man-Hours

1 Contractor 1
2 Contractor 2
 3 Contractor 3
4 Contractor 4
5 Contractor 5
6 Contractor 6
7
8
9
10
11
12

Spend

Total Engineering Cost

S/No Contractor
F$

1 Contractor 1
2 Contractor 2
3 Contractor 3
4 Contractor 4
5 Contractor 5
6 Contractor 6
7
8
9
10
11
12
Start to Date)

ENGINEERING
Scope
Description of Eng. NC Achieved
Description of Eng. NC Scope Description of Eng. non-NC Scope
to Date

Man-Hours

In-Country Out-Country
Total Project Eng. Man-Hours Utilized to Date Man-Hours Utilized to Date
Eng. NC Scope
Man-Hours
Man-Hours
Utilized to Date
Expatriate Nigerian Expatriate Nigerian
MH MH MH MH
Spend
In-Country Engineering Out-Country Engineering
Total NC Engineering Total Project Spend to Date Spend to Date
Cost Engineering Spend
F$ to Date Expatriate Nigerian Expatriate Nigerian
MH Spend MH Spend MH Spend MH Spend
 Name of Company : Sample
Registered Address : 123, Sample, Lagos
Period of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
Project Completion Date: Company’s stewardship date
F 1% Remittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users:
- This Sheet is used to obtain information on the Project Management Team
- Please provide information per personnel

PM Personnel

Use "1" to indicate if Permanent or

Contract
S/No Project Management Personnel Role

Permanent Contract
oject Start to Date)

PROJECT ORGANIZATION PMT RESOURCES

Personnel Man - Hours

In-Country
Total Project Management Man-Hours Total Project Management Man-Hours Utilized to Date
(Plan) NC Scope (Plan)
MH MH
Expatriate Nigerian
MH MH
MT RESOURCES

Spend

Out-Country In-Country Project Manageme

Man-Hours Utilized to Date Total Project Mangement Total NC Project Management Spend to Date
Cost (Plan) Cost (Plan)
F$ F$
Expatriate Nigerian Expatriate MH
MH MH Spend
 Spend

Country Project Management Out-Country Project Management

Spend to Date Spend to Date

Nigerian Expatriate MH Nigerian

MH Spend Spend MH Spend
 Name of Company : Sample
Registered Address : 123, Sample, Lagos
Period of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
Project Completion Date: Company’s stewardship date
F 1% Remittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users: This Sheet is used to obtain information on Fabrication and Construction. Kindly note that only the Manhour

TOTAL SCOPE TOTAL SCOPE

S/No. DESCRIPTION TONNAGE NC TONNAGE

1 DRILLING MODULES/PACKAGES
PILES, ANCHORS, BUOYS, JACKETS,
2 BRIDGES, FLARE BOOMS, STORAGE
TANKS, PRESSURE VESSELS

3 UMBILICAL

TOPSIDE MODULE (PROCESS

4
MODULES AND STORAGE MODULES)
5 ACCOMODATION MODULES
6 SUBSEA SYSTEMS
7 PIPELINE SYSTEMS
8 RISERS
9 UTILITIES MODULE/PACKAGES
10 TERMINAL/OIL MOVEMENT SYSTEMS
11 OTHER (*PLEASE SPECIFY)
12 OTHER (*PLEASE SPECIFY)
 Start to Date)

y note that only the Manhour cost makes up the Spend. The Spend on all Materials (direct and indirect) should be recorded in the Materials shee

FABRICATION AND CONSTRUCTION

TOTAL
TOTAL EXECUTED EXECUTED NC NC SCOPE TOTAL PROJECT
PROJECT
TONNAGE TONNAGE (MAN-HOURS) SPEND TO DATE ($)
MAN-HOURS
d be recorded in the Materials sheets

NAME/LOCATION
TOTAL NC SPEND TO
OF FABRICATION REMARKS
DATE ($)
YARD
 Company : Sample
ed Address : 123, Sample, Lagos
Submission : Quarter 4 Sample
ct Title/No : Sample
Client : Sample
t Start Date: The contract effective start date (CED)
letion Date: Company’s stewardship date
ce & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users: This Sheet is used to obtain inform

MATERIAL
Vendor NCEC
Category
S/No. Material Description
(Select from Category
A,B or None)
pany (Project Start to Date)

nstruction to Users: This Sheet is used to obtain information on Free Issued Materials. Spend on all free-issued Materials (direct and indirect) sh

MATERIALS BREAK-DOWN (FROM PROJECT INCEPTION TO DATE)

Original
Name of Procurement Source
Manufacturer
ued Materials (direct and indirect) should be recorded in this sheet

CEPTION TO DATE)

Measured Amount
1% NCDF Remitted Last Date of Remittance
Unit USD $
Comments
Name of Company : Sample
Registered Address : 123, Sample, Lagos
riod of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
ct Completion Date: Company’s stewardship date
emittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instructio

MATERIALS
Vendor NCEC
Category
S/No. Material Description
(Select from Category
A, B or None)
unt by Company (Project Start to Date)

Instruction to Users: This Sheet is used to obtain information on Materials.

MATERIALS BREAK-DOWN (FROM PROJECT INCEPTION TO DATE)

Original
Procurement Source
Manufacturer
n Materials.

TION TO DATE)

Measured
Amount USD $ 1% NCDF Remitted Last Date of Remittance
Unit
Comments
 Name of Company : Sample
Registered Address : 123, Sample, Lagos
Period of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
Project Completion Date: Company’s stewardship date
NCDF 1% Remittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Sta

Instruction to Users: This Sheet

SU

ENGINEERING AND OTHER ENGINEERING SERVICES

S/No.

FABRICATION

S/No.
WELL & DRILLING SERVICES / PETROLEUM TECHNOLOGY

S/No.

RESEARCH & DEVELOPMENT

S/No.

TRANSPORTATION/SUPPLY/DISPOSAL SERVICES

S/No.
QHSE

S/No.

INFORMATION SYSTEMS/TECHNOLOGY/COMMUNICATION

S/No.

MARINE, OPERATIONS & LOGISTICS

S/No.
FINANCE AND INSURANCE

S/No.

INSTALLATION, HOOK-UP & COMMISIONING

S/No.

PROJECT MANAGEMENT AND CONSULTING SERVICES

S/No.
SURVERYING & POSITIONING

S/No.

MODIFICATION AND MAINTENANCE

S/No.

SHIPPING

S/No.
act effective start date (CED)
s stewardship date
CDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users: This Sheet is used to obtain information on all Sub-contracts and Services

SUB-CONTRACT / SERVICES

Use "1" to indicate where service is

Vendor Name Service Description performed

In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country
 Use "1" to indicate where service is
performed
Vendor Name Service Description
In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country

HIJ Nig. Limited

 Use "1" to indicate where service is
performed
Vendor Name Service Description
In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country
 Use "1" to indicate where service is
performed
Vendor Name Service Description
In Country

Total 0

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country
 Use "1" to indicate where service is
performed
Vendor Name Service Description
In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country

Use "1" to indicate where service is

performed
Vendor Name Service Description
In Country
 `

contracts and Services

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country
"1" to indicate where service is
performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country
"1" to indicate where service is
performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country
"1" to indicate where service is
performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

0 - -

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country
"1" to indicate where service is
performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country

"1" to indicate where service is

performed Amount 1% NCDF Last Date of
Measured Unit Comments
USD $ Retention Remittance
Out country
 ame of Company : Sample
egistered Address : 123, Sample, Lagos
iod of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
t Completion Date: Company’s stewardship date
mittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users: This Sheet is u

EQUI

Equipment
Owner Category
S/No. Project Number
(Select from
Category C, D or
None)
ce) paid into NCDF account by Company (Project Start to Date)

Instruction to Users: This Sheet is used to obtain information on all leased Equipment

EQUIPMENT LISTING

Company Name (Equipment Owner) Project Name

ll leased Equipment

Lease Value Lease Period

Equipment
Main SoW Contract
Name/Description
USD Months
 13NC Capacity Building Training
Name of CompaSample
Registered Addr123, Sample, Lagos
Period of SubmiQuarter 4 Sample
Project Title/NoSample
Client : Sample
Project Start DaThe contract effective start date (CED)
Project CompletCompany’s stewardship date
NCDF 1% Remit Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Activity Description Planned Man-Hours

S/No. (Select from theNumber
drop-down
of Trai
menu)
(Trainer) Contractual Man-
Planned TraininName of Trainer

Engineering

Project Management

HSE & Security

Page 113
 13NC Capacity Building Training

Supply Management

Construction

Fabrication/Welding

Other Training Types

0 0

Page 114
 13NC Capacity Building Training

ct Start to Date)

Qualification / Certification (YES or NO)

Type of TraininACTUAL Man-hour
CUMULATIVECUMULATIVE
Ma *please
T use "1" to indicate eitherType
yes or
of no
Qualific

Yes No

Page 115
13NC Capacity Building Training

0 0

Page 116
 13NC Capacity Building Training

COMMENT

Supply Management
Construction
Fabrication/Welding
Other NC Commitments

Page 117
 13NC Capacity Building Training
A

Engineering
Project Management
HSE & Security
Supply Management
Construction
Fabrication/Welding
Other Training Types

Page 118
 Name of Company : Sample
Registered Address : 123, Sample, Lagos
Period of Submission : Quarter 4 Sample
Project Title/No : Sample
Client : Sample
Project Start Date: The contract effective start date (CED)
roject Completion Date: Company’s stewardship date
1% Remittance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users: This Sheet is used to obtain information on Res

RESEARCH AND DEVELOPME

Activity Description
S/No.
(List as Milestones and provide key activites per Milestone)
by Company (Project Start to Date)

rs: This Sheet is used to obtain information on Research and Development Activities

RESEARCH AND DEVELOPMENT

Vendors/ Contractors Planned Expenditure Actual Expenditure to Date Planned Completion Date
 Percentage
Completion (based
on Work Plan)
 e of Company : Sample
stered Address : 123, Sample, Lagos
of Submission : Quarter 4 Sample
roject Title/No : Sample
Client : Sample
oject Start Date: The contract effective start date (CED)
ompletion Date: Company’s stewardship date
ttance & Date: Actual NCDF( 1% of paid invoice) paid into NCDF account by Company (Project Start to Date)

Instruction to Users: This Sheet is used to obtain information on Com

RESEARCH AND DEVELOPME

Activity Description
S/No. (List as Milestones and provide key activites per Milestone)
mpany (Project Start to Date)

ers: This Sheet is used to obtain information on Community Development Initiatives

RESEARCH AND DEVELOPMENT

Vendors/Contractors Planned Expenditure Actual Expenditure to Date Planned Completion Date

 Percentage
Completion (based
on Work Plan)