0% found this document useful (0 votes)
168 views2 pages

High Temperature UV Unitised Flame Detector: Features Benefits

The document summarizes a high temperature UV flame detector that can operate at up to 125°C. It has a wide 110° field of view, continuous optical path monitoring to check for blockages, and a fast response time of under 100 milliseconds. The flame detector is suitable for applications involving gas turbines, power generation, and drying processes where high temperatures are present.

Uploaded by

s mura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
168 views2 pages

High Temperature UV Unitised Flame Detector: Features Benefits

The document summarizes a high temperature UV flame detector that can operate at up to 125°C. It has a wide 110° field of view, continuous optical path monitoring to check for blockages, and a fast response time of under 100 milliseconds. The flame detector is suitable for applications involving gas turbines, power generation, and drying processes where high temperatures are present.

Uploaded by

s mura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

High Temperature UV

Unitised Flame Detector


Features Benefits

• Operates at high temperatures • Suitable for gas turbine applications


(125°C)

• Wide field of view • Greater coverage for detecting fires


(110° Horizontal) utilising fewer detectors

• Continuous Optical Path • Checks optical path integrity and


Monitoring (COPM) detector’s electronic circuitry once
every minute

• Stainless steel construction • High level of corrosion resistance for


marine environments

• Exe wiring compartment • Ease of field wiring connection

• Fast response • 100 milliseconds for critical


applications

Description Applications

General Monitors’ Model FL3111HT is a high temperature • Gas Turbines


rated UV-only flame detector designed to detect unwanted
fires while maintaining false alarm immunity. The FL3111HT
detects in only the ultraviolet (UV) spectral range for optimized • Compressor Stations
speed of response.

The detector can withstand ambient temperatures up to 125°C • Power Generation


maximum. This is achieved by the use of a specially selected
detector and electronic components and very low power
consumption to reduce self-heating. • Generator Sets

The detector’s electronics are integral within an explosion –


proof housing, allowing detector information to be processed • Solvent Extraction
at the point of detection. The electronics are fully separated
from the Exe wire compartment, offering protection during
installation and service. The FL3111HT is available with 4-20 • Drying Processes
mA stepped output.

The COPM (Continuous Optical Path Monitoring) self test • Paint Booths
feature checks the optical path integrity (window cleanliness)
and the detector’s electronic circuitry once every minute.
System Specifications Electrical Specifications General Monitors
Wave Lengths: 185 to 260 nm Input Power: 20-36 VDC Worldwide
24 VDC @ 60 mA typ / 85 mA max.
Field of View: 110° horizontal
115° vertical Analogue
Signal: 4-20 mA (350 Ohms max.)
Sensitivity: Approved performance Fault Signal: 0 mA
specifications – 15.2 m (50 ft) COPM Fault: 2.0 ± 0.4 mA
2
distance for a 1 sq. ft. (0.092 m ) Ready Signal: 4.0 ± 0.4 mA
N-heptane fire. WARN Signal: 16.0 ± 0.4 mA
ALARM Signal: 20.0 ± 0.4 mA
Typical Response
www.generalmonitors.com
Time: <1s @ 50 ft (FL3111HT)
Selectable Lake Forest, CA
Minimum Sensor Options: Sensitivity: 100%, 75%, 50% 26776 Simpatica Circle
Response Time: <100 ms Alarm Time Delay: 2, 4, 8 or 10 Lake Forest, California 92630
seconds Tel: +1-949-581-4464
Fax: +1-949-581-1151
Classification: II 2 GD Ex de IIC T3, IP66 RFI/EMI Email: info@generalmonitors.com
Protection: Complies with EN50270, Type 2
Warranty: Two years Houston, TX
2 9776 Whithorn Drive
Approvals: ATEX and CE Marking Exe Terminal: 0.75 – 2.5 mm (12-22 AWG)
Houston, Texas 77095
Tel: +1-281-855-6000
Cable Fax: +1-281-855-3290
Requirements: 3 wire shielded cable minimum Email: gmhou@generalmonitors.com
Environmental Specifications configuration. Maximum distance
between FL3111HT and power
source or remote sensor @ 24 VDC Ireland
Operating Temperature Ballybrit Business Park
Range: -40°C to +125°C nominal (20 Ohms loop):
Galway
(-40°F to +257°F) Republic of Ireland
14 AWG – 2,250 m (7,400 ft)
Tel: +353-91-751175
Storage Temperature Fax: +353-91-751317
Range: -40°C to +125°C Maximum distance for analog output
(250 Ohms termination max): Email: info@gmil.ie
(-40°F to +257°F)

Operating Humidity 14 AWG – 2,750 m (9,000 ft) Singapore


No. 2 Kallang Pudding Road
Range: 0% to 100% RH,
Status #09-16 Mactech Building
non-condensing
Indicators: Two LED’s with status and fault cues Singapore 349307
Tel: +65-6748-3488
Pressure Range: 80 kPa (0.8 bar) to
Fault Fax: +65-6748-1911
110 kPa (1.1 bar)
Monitoring: Optics failure/blockage and low Email: genmon@gmpacifica.com.sg
supply voltage
United Arab Emirates
Standard P.O. Box 61209
Mechanical Specifications Configuration: FL3111HT-1-3-1 Jebel Ali
100% sensitivity, 4 second time delay Dubai
Housing: Stainless steel
United Arab Emirates
Tel: +971-4-8815751
Diameter: 84 mm (3.3 in)
Fax: +971-4-8817927
Email: gmme@emirates.net.ae
Length: 136 mm (5.3 in)
Specifications subject to change without notice. United Kingdom
Weight: 2.27 kg (5 lbs)
Heather Close
Cable Entries: 2 x M20 Lyme Green Business Park
Represented by: Macclesfield, Cheshire
United Kingdom, SK11 0LR
Tel: +44-1625-619583
Fax: +44-1625-619098
Email: info@generalmonitors.co.uk

Publication #: DS-FL3111HT-D0308-EU

You might also like