ZAXIS-3 series

HYDRAULIC EXCAVATOR
Model Code : ZX200 -3 / ZX200LC-3 / ZX210H-3 / ZX210LCH-3 /
ZX210K-3 / ZX210LCK-3
Engine Rated Power : 122 kW (164 HP)
Operating Weight : ZX200 -3 : 19 800 kg / ZX200LC-3 : 20 400 kg
ZX210H-3 : 21 000 kg / ZX210LCH-3 : 21 400 kg
ZX210K-3 : 21 900 kg / ZX210LCK-3 : 22 300 kg
Backhoe Bucket : SAE, PCSA Heaped: 0.51 - 1.20 m3
CECE Heaped: 0.45 - 1.00 m3
The Power to Perform
The ZAXIS-3 series is a new generation of excavators designed
to provide more efficient power, productivity and improved
operator comfort. By listening carefully to the wishes of the
end-user, HITACHI not only understands your business, but also
provides the reliable solutions you’ve been looking for.

NEW AND IMPROVED

Performance:
12 % higher production

Comfort:
Excellent visibility
Enhanced controllability
Lower noise level

Reduced running costs:

Lower fuel consumption per m3
Improved durability and reliability

New equipment:
Rear view camera (optional)
Theft deterrent system


Productivity Multi function monitor Safety measures
New E-mode Maintenance support CRES II cab
New hydraulic system HIOS III Attachment support system Cab right protection bars
Hydraulic boosting system Rear view camera (optional) Pilot control shut-off lever
Enhanced boom recirculation system Theft deterrent system Engine shut-off switch
New electronic controlled diesel engine Fuel consumption monitoring Page 14
Page 4-5 Page 8-9
Environment measures
Operator comfort Durability and reliability Array of low noise mechanisms
High visibility inside cab Strengthened undercarriage Ecological design
Short stroke levers Strengthened X beam Page 15
Wide foot space Improved idler brackets
Comfort designed seat Strengthened front attachment Parts & service
Improved controllability and operator Page 10-11 Page 16-17
comfort
Page 6-7 Maintenance Various versions
Parallel arrangement of the cooling Heavy-duty version H-series
pack Demolition version K-series
Conveniently located inspection points Page 18-19
Page 12-13
Specifications
Page 20-27

The new engine complies

with the Emission Regulations
U.S EPA Tier 3, and EU Stage III A

The advanced low noise

design complies with
the EU noise
regulation 2000 / 14 / EC,
STAGE II

Notes : Some of the pictures in this catalog show an unmanned machine with attachments in an operating position. These were taken
for demonstration purposes only and the actions shown are not recommended under normal operating conditions.

Boosted Productivity
New hydraulic system HIOS III and new OHC 4-valve diesel engine were developed for ZAXIS-3.
These advanced technologies are at work to yield bigger output with higher fuel efficiency.


 More production, less fuel consumption

Increased Production New E-mode Increase in Swing Torque and

A combination of the hydraulic system The new E mode, H / P mode and Traction Force
(HIOS*III) and new OHC** 4-valve P mode can be selected to suit job Swing torque and traction force are
engine allows the efficient use of needs. The new E mode can save fuel increased significantly.
hydraulic pressure to increase speeds consumption by up to 13 % compared -Swing torque 13 % UP
of actuators and boost production with to the previous P mode, while yielding -Traction force 11 % UP
higher fuel efficiency. The productivity similar production. Sophisticated Travel Control; At
is increased 12 % in comparison to climbing or steering, when the machine
previous model ZAXIS-1. needs more traction force, the engine
speed automatically increases which
*Human & Intelligent Operation System
**OverHead Camshaft makes the machine faster.

Efficient hydraulic control - HIOS III

ZAXIS-1 adapted HIOS II hydraulic The Hydraulic Boosting System Enhanced Boom Recirculation System
system that is suitable for fine In arm roll-in and boom raise operation, In combined operation of boom lower
controllability by the operators. excess pressurized oil is delivered and arm, pressurized oil from boom
Continuously HITACHI developed new from boom cylinder rod side to arm cylinder bottom side is delivered to
advanced hydraulic technology HIOS III cylinder bottom side to increase flow boom cylinder rod side, assisted by
for ZAXIS-3. rate giving 20 % higher arm roll-in boom weight, for boom lowering. At the
In addition to the fine controllability this speed. Excess pressurized oil from same time, pressure oil from the pump
new system increases the efficiency of boom cylinder rod side is delivered to is delivered to the arm cylinder for arm
hydraulic circuit and increases speed of arm cylinder bottom side through a movement.
actuators. regenerative valve to increase flow rate This mechanism allows an increase of
for productive operation. speed in combined operation of 15 %.

Development concept of new engine

OHC 4-Valve Engine Common Rail Type Fuel Injection Cooled EGR** System
The new OHC -valve diesel engine is System The cooled EGR system lets part
developed and built to comply with the Electronic control common rail type fuel of exhaust gasses mix with intake
rigorous Emission Regulations enforced injection system drives an integrated air for re-combustion to reduce
in 2006 in U.S. and EU. This new fuel pump at an ultrahigh pressure to oxygen concentration in the air in the
engine contributes to environmental distribute fuel to each injector per combustion chamber. This design
preservation. At the same time it cylinder through a common rail. lowers combustion temperature in the
realizes high durability and low fuel This enables optimum combustion to cylinder, reducing fuel consumption and
consumption by adapting the latest generate big horsepower, and reduce NOx while yielding more horsepower.
advanced engine technology. PM* (diesel plume) and fuel *Exhaust Gas Recirculation
consumption.
*Particulate Matter

Fuel Filter Common Rail Pressure Sensor

Fuel Pump Common Rail Coolant Control
Unit
EGR Cooler
EGR
Control Valve

Intake

Cylinder Head

Fuel Tank Control Unit Injector Exhaust


A New Standard in Operator Comfort
The operator’s seat of the ZAXIS-3 series gives the operator
an excellent view of the jobsite. On the widescreen color LCD
monitor the operator can see machine conditions. Ample
legroom, short stroke levers and a large seat ensure optimum
working conditions for the operator during long hours.


The ZAXIS-3 series cab has been
redesigned to meet demands of
customers. From the operator’s seat
the operator has an excellent view of
the jobsite. On the widescreen color
LCD monitor the operator can see
machine conditions and with the rear
view camera (optional), what is behind
the machine. Ample legroom, short
stroke levers and a suspension seat
(optional) with heating ensure optimum
working conditions. The seat features
horizontal, vertical adjustments and
has a backrest contoured for comfort,
with a HITACHI logo.

Wide adjustable armrests and a retractable seat belt are included. Short stroke levers
allow for continuous operation with less fatigue. Three switches on the lever (optional)
can be set to operate attachments other than buckets. The cab is pressurized to keep
out dust. Noise and vibrations are kept to a minimum due to the elastic mounts, filled
with silicone oil, the cab rests on.

Visibility is improved especially for the right downward view. Sliding windows on the
front and side enable direct communication between operator and other workers. Foot
space has increased and travel pedals have been redesigned for easier operation.
A flat floor allows for easy cleaning. Ergonomic controls and switches, fully automatic
air conditioner and a radio complete the package.


Embedded Information Technology
The ZAXIS-3 series is equipped with a widescreen color LCD
monitor with adjustable contrast for day and night shifts. With
the monitor the operator can check maintenance intervals,
select work modes, monitor fuel consumption, and connect to
the rear view camera (optional). A theft deterrent system and
multi-language selection is also available.

Multi function monitor

Attachment support system

(work mode selector)

The color LCD monitor, located in the

cab, indicates coolant temperature,
fuel level, and maintenance data. It also
allows one-touch adjustment of the
attachment. The display can also be When replacing the attachment, oil
adjusted to day or night shift. flow adjustment can automatically be
done by one touch on the work mode
selection display on the LCD monitor.
Maintenance support Minor adjustments of oil flow is possible
if necessary.

Multi-language selection

Replacement timing of hydraulic oil

and fuel filters is alerted to the operator
through the LCD monitor according to
the schedule preset by the user each
time when turning the key switch. The menu allows selection from 12
The scheduled maintenance can languages.
prevent the failure of the machine.


 Rear view camera (optional)

Theft deterrent system

The widescreen color LCD, in tandem

with the rear view camera on the
counterweight, provides a convenient
view of the area behind the unit.
The electronic immobiliser requires The rear view camera automatically
the entry of a password to the works when travelling backward, and
multifunctional monitor each time when can also be manually turned on with a
starting the engine to prevent theft and select switch on the monitor.
vandalism.

Fuel consumption monitoring

Fuel consumption per operating hour is

computed, and the result is displayed
on the LCD monitor. This information
suggests refuelling timing, and guides
energy-saving operation and efficient
job management.

*The indicated values are examples and could differ from

those in actual operation.


A Solid Base for a Long Life
HITACHI’s technology is built on a wealth of experience and
know-how from limestone sites and quarries around the world.
The undercarriage of the ZAXIS 200 has become much stronger.
Improved construction and enlarged box sections, a track
undercover plate that protects the center joint and hydraulic
hoses make this machine more durable.

10
 Strengthened undercarriage

Upper rollers and upper roller brackets are increased in size for higher durability.
Track links are thickened and reshaped for higher durability and rigidity.

Strengthened X beam and side frames

The X-beam is strengthened by the improved construction and enlarged box sections.
The section is increased in strength up to 35 % (maximum). Top and bottom plates
of the X-beam use monolithic plates, instead of conventional welded four plates. This
eliminates welding to strengthen the X-beam.

Improved idler brackets

The idler bracket reinforcing plate is thickened greatly for higher durability to prevent
Idler bracket
the opening of the idler bracket. The track link disengagement preventive plate, reinforcing plate
located immediately behind the idle bracket, extends its top to prevent track link
Increased
disengagement and increase durability. bracket width

Track link
disengagement
preventive plate

Strengthened front attachment

The boom top bracket is strengthened by using high-tensile steel.

At arm-bucket joint, the arm top is hardened with WC thermal spraying (Tungsten-
Carbide) for greater wear resistance at its contact surface with bucket, reducing
jerking. Reinforced resin thrust plates designed to reduce noise and resist wear.

The new HN bushings, containing “solid molybdenum-based lubricant”, are utilized at

the boom-arm joint and arm cylinder mounting area for better lubrication and higher
durability. (At other joints, conventional HN bushings are also utilized.)

The boom foot is enlarged for higher strength. This improvement increases the
durability and reliable under heavy-duty operation.

New HN bushing

WC Thermal spraying Reinforced resin thrust plates

11
Simplified Maintenance
The ZAXIS-3 series meet customer demands for simplified
maintenance. Regular maintenance is the key for keeping
equipment in top condition, which can help to prevent costly
downtime. In addition, a regularly serviced machine has higher
residual value. There are many service features to be found on
the ZAXIS-3 series.

12
Parallel arrangement of the cooling pack

Easy removal of
debris and dirt
from blower, etc.

Engine

Oil Cooler Radiator Intercooler

The oil cooler, radiator and intercooler are laid out in a parallel arrangement, instead
of the conventional in-line arrangement. This parallel arrangement is significantly
easier to clean around the radiator. The air conditioner condenser can be opened for Parallel Arrangement

easy cleaning of the condenser and the radiator located behind.

Conveniently located servicing points

Wide doors give access, from ground level, to the fuel filter, water separator and The fresh air filter for the air conditioner
engine oil filter. A large handrail, steps and anti-skid plates lead to the engine cover. is relocated to cab door side from
The engine oil pan is fitted with a drain coupler. When draining, an associated drain conventional location behind the
hose is connected to the drain coupler. The drain coupler is reliable, avoiding oil operator seat. This allows easy cleaning
leakage and vandalism. and replacement of the fresh air filter,
like the air circulation filter inside the
cab.

Extended oil and filter change intervals

Front Pin Lubricating Intervals and Consumables Replacement The oil and filter change intervals have
been extended considerably, reducing
New ZAXIS 200
maintenance time and expenses.
Lubricant Bucket 500 h Engine oil consumption is lower.
Boom Foot 500 h Hydraulic oil can be used up to 5 000
Front 500 h hours.

Consumables Engine Oil 500 h

Engine Oil Filter 500 h

Hydraulic Oil 5 000 h
Hydraulic Oil Filter 1 000 h
Fuel Filter 500 h

13
Safety Features
Ensuring the safety of the operator and other workers on the
jobsite is an important concern for HITACHI. That is why the
ZAXIS-3 series has a number of safety features including
a new reinforced cab and shut-off mechanisms for engine and
pilot controls.

CRES II cab

The CRES II cab is designed to help with “just in case” protection for the operator.
Safety in case of tipping is improved. The cab top, for instance, can withstand about
2.5 times conventional load when side load is applied to the cab top until its
deformation reaches 200 mm.

Withstanding load : 2.5-fold increase

Additional features

Cab right protection bars Evacuation hammer Pilot control shut-off lever

Other features include a retractable seat belt, evacuation hammer and emergency
engine shut-off switch. A shut-off lever for pilot control helps to prevent unintentional
movements. In addition, a Falling Object Protective Structure (FOPS) guard is
optionally available. For the cab windows there is a choice of laminated or tempered
glass.

14
Environmental Features
HITACHI takes its responsibility when it comes to the
environment.
Our production facilities have ISO 14001 certification.
The HITACHI machine is lead free and has a low-noise
design, therefore HITACHI customers get one of the most
environmentally considerate hydraulic excavators available
today.

A cleaner machine

The ZAXIS-3 series is equipped with a clean but powerful engine to comply with
Tier 3, and Stage III A. An engine emission regulations effective in the U.S. EPA and
European Union from 2006. Exhaust gas is partly re-combusted to reduce particulate
matter (PM) output and lower nitrogen oxide (NOx) levels.

A quieter machine

A number of features make this machine quieter. First, isochronous control of the
engine speed means a restriction of engine speed during no-load and light-duty
operation to suppress sound. Second, a fan with curved blades reduces air resistance
and air flow noise. Third, a time-tested muffler suppresses engine noise significantly.

A recyclable machine

All resin parts are marked to facilitate recycling. The machine is completely lead-
free. The radiator and oil cooler are made from aluminium and all wires are lead-
less. In addition, biodegradable hydraulic oil is available for jobsites where special
environmental care is required.

15
Parts & Service
Over the years, we have gained experience in one of the most
competitive service markets in the world - Japan.
Using our know-how in dealing directly with customers, we have
created a worldwide support system that is highly capable.

Machine includes optional equipment installed by customer.

16
Parts

HITACHI only offers genuine high

quality parts. We guarantee that these
parts have high performance and long
life. We manage around 1 000 000
types of parts all around the world. They
are designed and built to be the best
match for your HITACHI equipment.
HITACHI has a global parts distribution
network that makes sure you get what
you need as quickly as possible. We
have more than 150 dealers worldwide
who provide the closest support for
your needs. In most cases, your dealer
will have the replacement part that
you require. If a dealer does not have
a certain part, he can order it from
four fully stocked parts depots located
across the world. These distribution
centres are all connected by a on-
line system that gives them access to
shared information on stocks, such as
the number and type of available parts.
The depots, which in turn are stocked
by a parts center in Japan, minimize
delivery time and enable you to get
your parts as efficiently and quickly as
possible.

Service

Our goal is to “keep customer To minimize downtime during If you would like more information
equipment at a maximum performance troubleshooting, we developed a PDA regarding parts and/or service, please
level”. To fulfil this goal, we have based diagnostic system called “Dr.ZX”. ask your nearest HITACHI dealer. Not all
set more than 150 dealers all over To keep our customers’ equipment programs and/or services are available
the world. They have highly trained in top running shape, good service is in every market or region.
technicians, and provide a number of indispensable. We believe personnel
support programs. training is the key to providing the best
HITACHI provides a unique extended service.
warranty program called HITACHI
Extended Life Program, or HELP.

17
Base Machine for Doing a Wide Range of Jobs.
Can be used with a wide range of hydraulic attachments.
Options include large-capacity additional pump along with
piping and components for the attachments.

Heavy-Duty Version H-Series

ZAXIS210H / ZAXIS210LCH

5
2
3
6
11
10 7
4
9
8

Full track guard (Optional)

1 Reinforced thick steel front 5 4 750 kg counterweight.

section. (H-boom / H-arm)
Thicker steel arm end. 6 6.0 mm thickness undercover.
Damage prevention plate and
square bars. 7 Reinforced side step. (bolt
mounted)
2 Reinforced link B.
8 Reinforced lower flange.
3 Front glass lower guard.
9 Reinforced track guard. (2 units
4 H-reinforced bucket. each side)
Thicker steel.
Additional lateral plate. 10 Reinforced idler bracket.
Additional reinforcement plates
on cutting edge section. 11 600 mm reinforced triple
grouser shoe.

18
Demolition Version K-Series
ZAXIS210K / ZAXIS210LCK

1
2
3
4
10

5 11
12

6 13

7
14
8

9
15
16

1 Reinforced bucket cylinder. 9 600 mm reinforced triple grouser 14 Reinforced side step. (bolt
shoe. mounted)
2 Attachment basic piping.
10 K-cab. (CRES ll cab with 15 Reinforced lower flange.
3 Damage prevention plate. overhead window & guard)
16 Track undercover.
4 Reinforced link B for demolition.

5 K-reinforced bucket.
OPTION
Accessories for breaker
Accessories for breaker &
crusher
Accessories for 2 speed
selector
Front glass upper guard
Small radius swing bracket
Pilot accumulator

11 Twin wiper.
Notes : Photo shown model equipped
12 High-performance full-flow filter. with optional accessories for
(with restriction indicator) breaker and crusher.
6 Front glass lower guard. Total weight of attachments to
13 5 350 kg counterweight. be mounted is from a standpoint
7 6.0 mm thickness undercover. of machine stability. For more
details, contact your distributor.
8 Reinforced idler bracket.

19
SPECIFICATIONS

ENGINE UPPERSTRUCTURE
Model�������������������������� Isuzu AI-4HK1X Revolving Frame
Type���������������������������� 4-cycle water-cooled, direct injection Welded sturdy box construction, using heavy-gauge steel plates for
Aspiration�������������������� Turbocharged, intercooled ruggedness. D-section frame for resistance to deformation.
No. of cylinders����������� 4
Rated power Swing Device
Axial piston motor with planetary reduction gear is bathed in oil. Swing
ISO 9249, net ��������� 122 kW (164 HP) at 2 000 min-1
(rpm)
circle is single-row, shear-type ball bearing with induction-hardened
EEC 80/1269, net��� 122 kW (164 HP) at 2 000 min-1 (rpm)
internal gear. Internal gear and pinion gear are immersed in lubricant.
SAE J1349, net ������ 122 kW (164 HP) at 2 000 min-1 (rpm) Swing parking brake is spring-set/hydraulic-released disc type.
Maximum torque��������� 655 Nm (67 kgf m) at 1 500 min-1 (rpm) Swing speed��������������� 13.3 min-1 (rpm)
Piston displacement���� 5.193 L Swing torque��������������� 68.0 kN·m (5 020 kgf·m)
Bore and stroke���������� 115 mm x 125 mm
Batteries���������������������� 2 x 12 V / 88 Ah
Operator’s Cab
Independent spacious cab, 1 005 mm wide by 1 675 mm high,
HYDRAULIC SYSTEM conforming to ISO* Standards. Reinforced glass windows on 4 sides
for visibility. Front windows (upper and lower) can be opened. Reclining
• Work mode selector seat with armrests; adjustable with or without control levers.
Digging mode / Attachment mode * International Standardization Organization
• Engine speed sensing system
Main pumps���������������� 2 variable displacement axial piston pumps UNDERCARRIAGE
Maximum oil flow��� 2 x 212 L/min
Tracks
Pilot pump������������������� 1 gear pump Tractor-type undercarriage. Welded track frame using selected materials.
Maximum oil flow��� 30 L/min Side frame welded to track frame. Lubricated track rollers, idlers, and
 sprockets with floating seals.
Hydraulic Motors Track shoes with triple grousers made of induction-hardened rolled alloy.
Heat-treated connecting pins with dirt seals. Hydraulic (grease) track
Travel�������������������������� 2 variable displacement axial piston motors
adjusters with shock-absorbing recoil springs.
Swing�������������������������� 1 axial piston motor
Numbers of Rollers and Shoes on Each Side
Relief Valve Settings Upper rollers���������������� 2
Implement circuit��������� 34.3 MPa (350 kgf/cm2) Lower rollers��������������� 7 : ZX200-3 / ZX210H-3 / ZX210K-3
Swing circuit���������������� 34.3 MPa (350 kgf/cm2) 8 : ZX200LC-3 / ZX210LCH-3 / ZX210LCK-3
Travel circuit���������������� 34.3 MPa (350 kgf/cm2) Track shoes����������������� 46 : ZX200-3 / ZX210H-3 / ZX210K-3
Pilot circuit������������������ 3.9 MPa (40 kgf/cm2) 49 : ZX200LC-3 / ZX210LCH-3 / ZX210LCK-3
Power boost��������������� 36.3 MPa (370 kgf/cm2) Track guard����������������� 1 : ZX200-3 / ZX200LC-3 / ZX210K-3 /
ZX210LCK-3
Hydraulic Cylinders 2 : ZX210H-3 / ZX210LCH-3
High-strength piston rods and tubes. Cylinder cushion mechanisms
provided in boom and arm cylinders to absorb shock at stroke ends. Travel Device
Each track driven by 2-speed axial piston motor through planetary
Dimensions reduction gear for counterrotation of the tracks. Sprockets are replaceable.
Quantity Bore Rod diameter
Parking brake is spring-set/hydraulic-released disc type. Travel shockless
relief valve built in travel motor absorbs shocks when stopping travel.
Boom 2 120 mm 85 mm Automatic transmission system: High-Low.
Arm 1 135 mm 95 mm Travel speeds��������������� High : 0 to 5.5 km/h
Bucket 1 115 mm 80 mm Low : 0 to 3.5 km/h

Maximum traction force���� 203 kN (20 700 kgf)

Hydraulic Filters
Hydraulic circuits use high-quality hydraulic filters. A suction filter is
incorporated in the suction line, and full-flow filters in the return line and Gradeability�������������������� 70 % (35 degree) continuous
swing / travel motor drain lines.

CONTROLS
Pilot controls. Hitachi's original shockless valve.
Implement levers��������� 2
Travel levers with
pedals������������������������� 2

20
WEIGHTS AND GROUND PRESSURE SERVICE REFILL CAPACITIES
ZX200 -3: Fuel tank�������������������������������������������������������������������������������� 400.0 L
Equipped with 5.68 m boom, 2.91 m arm and 0.80 m3 bucket (SAE, 26.0 L
Engine coolant�����������������������������������������������������������������������
PCSA heaped).
Engine oil������������������������������������������������������������������������������� 23.0 L
Shoe type Shoe width Operating weight Ground pressure
Swing device ������������������������������������������������������������������������� 6.2 L
600 mm 19 800 kg 44 kPa (0.45 kgf/cm2)
Triple Travel device (each side)�������������������������������������������������������� 6.8 L
700 mm 20 200 kg 39 kPa (0.40 kgf/cm2)
grouser Hydraulic system�������������������������������������������������������������������� 240.0 L
800 mm 20 500 kg 34 kPa (0.35 kgf/cm2)
Hydraulic oil tank�������������������������������������������������������������������� 135.0 L
Triangular 760 mm 20 900 kg 36 kPa (0.37 kgf/cm2)

Flat 600 mm 20 700 kg 46 kPa (0.47 kgf/cm2)

ZX200LC-3:
Equipped with 5.68 m boom, 2.91 m arm and 0.80 m3 bucket (SAE,
PCSA heaped).
Shoe type Shoe width Operating weight Ground pressure

600 mm 20 400 kg 42 kPa (0.43 kgf/cm2)

Triple
700 mm 20 800 kg 37 kPa (0.38 kgf/cm2)
grouser
800 mm 21 100 kg 32 kPa (0.33 kgf/cm2)

Triangular 760 mm 21 500 kg 34 kPa (0.35 kgf/cm2)

Flat 600 mm 21 300 kg 44 kPa (0.45 kgf/cm2)

ZX210H-3:
Equipped with 5.68 m H-boom, 2.91 m H-arm and 0.80 m3 H-bucket
(SAE, PCSA heaped).
Shoe type Shoe width Operating weight Ground pressure

Reinforced
600 mm 21 000 kg 47 kPa (0.48 kgf/cm2)
Triple grouser

ZX210LCH-3:
Equipped with 5.68 m H-boom, 2.91 m H-arm and 0.80 m3 H-bucket
(SAE, PCSA heaped).
Shoe type Shoe width Operating weight Ground pressure

Reinforced
600 mm 21 400 kg 44 kPa (0.45 kgf/cm2)
Tripe grouser

ZX210K-3:
Equipped with 5.68 m K-boom, 2.91 m K-arm and 0.80 m3 K-bucket
(SAE, PCSA heaped).
Shoe type Shoe width Operating weight Ground pressure

Reinforced
600 mm 21 900 kg 49 kPa (0.50 kgf/cm2)
Triple grouser

ZX210LCK-3:
Equipped with 5.68 m K-boom, 2.91 m K-arm and 0.80 m3 K-bucket
(SAE, PCSA heaped).
Shoe type Shoe width Operating weight Ground pressure

Reinforced
600 mm 22 300 kg 46 kPa (0.47 kgf/cm2)
Triple grouser

Weight of the basic machines [including 4 350 kg, 4 750 kg H-type,

or 5 350 kg K-type counterweight and triple grouser shoes, excluding
frontend attachment, fuel, hydraulic oil, engine oil and coolant etc.] are:
ZX200-3���������������������� 15 400 kg with 600 mm shoes
ZX200LC-3������������������ 16 000 kg with 600 mm shoes
ZX210H-3�������������������� 16 400 kg with 600 mm reinforced shoes
ZX210LCH-3��������������� 16 800 kg with 600 mm reinforced shoes
ZX210K-3�������������������� 17 100 kg with 600 mm reinforced shoes
ZX210LCK-3���������������� 17 500 kg with 600 mm reinforced shoes

21
SPECIFICATIONS

BACKHOE ATTACHMENTS
Boom and arms are of welded, box-section design. 5.68 m boom, and 2.42 m and 2.91m arms are available.
Bucket is of welded steel structure. Side clearance adjust mechanism provided on the bucket joint bracket.

Buckets
Recommendation
Capacity Width ZX210H-3 ZX210K-3
No. of ZX200-3 ZX200LC-3
Weight ZX210LCH-3 ZX210LCK-3
teeth
Without With 2.42 m 2.91 m 2.42 m 2.91 m 2.91 m 2.91 m
SAE, PCSA heaped CECE heaped
side cutters side cutters arm arm arm arm H-arm K-arm

0.51 m3 0.45 m3 720 mm 830 mm 3 530 kg

0.80 m3 0.70 m3 1 030 mm 1 140 mm 5 660 kg

0.91 m3 0.80 m3 1 150 mm 1 260 mm 5 700 kg

1.10 m3 0.90 m3 1 330 mm 1 440 mm 6 770 kg — — —

1.20 m3 1.00 m3 1 450 mm — 6 690 kg — — — — — —

0.80 m3 0.70 m3 1 030 mm 1 140 mm 5 750 kg

*1 0.91 m3 0.80 m3 1 150 mm 1 260 mm 5 800 kg
*2 0.80 m3 0.70 m3 1 040 mm 1 150 mm 5 760 kg
*3 0.80 m3 0.70 m3 1 030 mm 1 140 mm 5 660 kg
*4 0.80 m3 0.70 m3 1 040 mm 1 150 mm 5 760 kg
*5 0.60 m3 0.50 m3 800 mm — 3 950 kg — — — — — —

One-point ripper 1 540 kg — — — — — —

Slope-finishing blade: Width 1 100 mm, length 1 800 mm — 590 kg — —

V shape Bucket: — 520 kg — —

Center-pull type clamshell bucket: 0.60 m3 (CECE heaped), Width 940 mm — 1 130 kg

Shell-push type clamshell bucket: 0.60 m3 (CECE heaped), Width 870 mm —

*1 Reinforced bucket Suitable for materials with density of 2 000 kg/m3 or less
*2 H-bucket Suitable for materials with density of 1 600 kg/m3 or less
*3 Level-pin-type reinforced bucket Suitable for materials with density of 1 100 kg/m3 or less
*4 Super V teeth type reinforced bucket Heavy-duty service
*5 Ripper bucket Slope-finishing service
— Not applicable

22
 DIMENSIONS

Unit: mm
ZX200-3 ZX200LC-3 ZX210H-3 ZX210LCH-3 ZX210K-3 ZX210LCK-3
A Distance between tumblers 3 370 3 660 3 370 3 660 3 370 3 660
B Undercarriage length 4 170 4 470 4 170 4 470 4 170 4 470
* C Counterweight clearance 1 030 1 030 1 030 1 030 1 030 1 030
D Rear-end swing radius 2 750 2 750 2 750 2 750 2 750 2 750
D’ Rear-end length 2 750 2 750 2 750 2 750 2 750 2 750
E Overall width of upperstructure 2 710 2 710 2 710 2 710 2 710 2 710
F Overall height of cab 2 950 2 950 2 950 2 950 3 080 3 080
* G Min. ground clearance 450 450 450 450 450 450
H Track gauge 2 200 2 390 2 200 2 390 2 200 2 390
I Track shoe width G 600 G 600 G 600 G 600 G 600 G 600
J Undercarriage width 2 800 2 990 2 800 2 990 2 800 2 990
K Overall width 2 860 2 990 2 860 2 990 2 860 2 990
L Overall length
With 2.42 m arm 9 605 9 605 9 605 9 605 9 605 9 605
With 2.91 m arm 9 520 9 520 9 520 9 520 9 520 9 520
With 4.41 m arm 9 420 9 420 9 420 9 420 9 420 9 420
M Overall height of boom
With 2.42 m arm 3 180 3 180 3 180 3 180 3 180 3 180
With 2.91 m arm 2 940 2 940 2 940 2 940 2 940 2 940
With 4.41 m arm 3 510 3 510 3 510 3 510 3 510 3 510
N Track height with triple grouser shoes 920 920 920 920 920 920
* Excluding track shoe lug
G: Triple grouser shoe

WORKING RANGES
Unit: mm
ZX210H-3 / ZX210K-3 /
ZX200-3 / ZX200LC-3
ZX210LCH-3 ZX210LCK-3

5.68 m H-boom 5.68 m K-boom

Arm length 2.42 m 2.91 m
2.91 m H-arm 2.91 m K-arm

A Max. digging reach 9 430 9 920 9 920

A’ Max. digging reach (on ground) 9 250 9 750 9 750

B Max. digging depth 6 180 6 670 6 670

B’ Max. digging depth (8' level) 5 950 6 490 6 490

C Max. cutting height 9 670 10 040 10 040

D Max. dumping height 6 830 7 180 7 180

E Min. swing radius 3 280 3 180 3 180

F Max. vertical wall 5 300 5 990 5 990

Bucket digging force* ISO 151 kN (15 400 kgf)

Bucket digging force* SAE : PCSA 129 kN (13 200 kgf)

133 kN 109 kN
Arm crowd force* ISO 109 kN (11 100 kgf)
(13 600 kgf) (11 100 kgf)

124 kN 102 kN
Arm crowd force* SAE : PCSA 102 kN (10 400 kgf)
(12 700 kgf) (10 400 kgf)
Excluding track shoe lug
* At power boost

23
LIFTING CAPACITIES
Notes: 1. Ratings are based on SAE J1097. A A: Load radius
2. Lifting capacity of the ZAXIS Series does not exceed 75% of tipping load with the
machine on firm, level ground or 87% full hydraulic capacity. B: Load point height
3. The load point is a hook (not standard equipment) located on the back of the bucket. C: Lifting capacity
B
4. *Indicates load limited by hydraulic capacity.
5. 0 m = Ground. C

ZX200–3 Rating over-side or 360 degrees Rating over-front  Unit: 1 000 kg

Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

Mono Boom 7.0 m *3.58 *3.58 *2.45 *2.45 8.09

5.68 m 6.0 m *3.93 *3.93 3.26 *4.04 2.18 *2.39 8.69
Arm 2.91 m 5.0 m *4.20 *4.20 3.22 *4.14 2.47 *3.04 1.94 *2.37 9.11
Bucket
4.0 m *5.15 *5.15 4.11 *4.70 3.14 *4.41 2.44 3.86 1.79 *2.40 9.40
SAE, PCSA: 0.80 m3
Counterweight 3.0 m *7.89 *7.89 5.27 *6.23 3.93 *5.34 3.03 4.77 2.38 3.80 1.70 *2.47 9.55
4 350 kg 2.0 m 6.87 *9.94 4.96 *7.35 3.75 5.97 2.92 4.65 2.31 3.72 1.65 *2.57 9.58
Shoe 600 mm 1.0 m 6.49 *7.44 4.70 7.75 3.58 5.79 2.81 4.53 2.24 3.65 1.66 *2.72 9.48
0 (Ground) 6.34 *7.97 4.54 7.56 3.46 5.65 2.72 4.43 2.19 3.59 1.71 2.84 9.26
-1.0 m *4.43 *4.43 6.30 *10.65 4.46 7.46 3.38 5.57 2.66 4.37 2.15 3.55 1.82 3.02 8.90
-2.0 m *5.14 *5.14 *8.27 *8.27 6.32 11.03 4.43 7.44 3.35 5.53 2.64 4.34 2.14 3.54 2.03 3.33 8.40
-3.0 m *9.15 *9.15 *10.49 *10.49 6.38 *10.44 4.46 7.47 3.36 5.54 2.65 4.36 2.37 3.86 7.69
-4.0 m *9.64 *9.64 10.70 *11.44 6.49 *9.37 4.53 7.55 3.42 5.61 3.02 *4.37 6.71
-5.0 m *9.25 *9.25 6.66 *7.70 4.67 *6.31

Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

Mono Boom 7.0 m *3.04 *3.04 2.93 *3.70 7.48

5.68 m 6.0 m 4.26 *4.44 2.46 *3.62 8.13
Arm 2.42 m 5.0 m *4.93 *4.93 4.18 *4.67 3.17 *4.55 2.18 3.45 8.59
Bucket
4.0 m *6.90 *6.90 5.45 *5.77 4.04 *5.14 3.10 *4.78 2.41 3.82 1.99 3.20 8.89
SAE, PCSA: 0.80 m3
Counterweight 3.0 m 5.14 *6.84 3.87 *5.75 3.00 4.73 2.36 3.77 1.89 3.06 9.05
4 350 kg 2.0 m 4.85 *7.89 3.69 5.91 2.89 4.62 2.30 3.71 1.84 3.00 9.08
Shoe 600 mm 1.0 m 4.63 7.66 3.54 5.74 2.80 4.51 2.24 3.64 1.84 3.03 8.98
0 (Ground) 4.51 7.52 3.44 5.63 2.72 4.43 2.20 3.60 1.91 3.14 8.75
-1.0 m 6.34 *8.98 4.46 7.46 3.39 5.57 2.68 4.39 2.18 3.58 2.06 3.36 8.37
-2.0 m *8.61 *8.61 6.39 *10.67 4.47 7.47 3.38 5.56 2.68 4.38 2.32 3.76 7.81
-3.0 m *8.64 *8.64 6.46 *9.82 4.52 7.53 3.41 5.60 2.72 4.43 2.78 4.49 7.03
-4.0 m *10.02 *10.02 6.60 *8.54 4.62 *7.13 3.51 5.70
-5.0 m *6.50 *6.50 4.81 *5.21

ZX200LC–3
Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

Mono Boom 7.0 m *3.58 *3.58 *2.45 *2.45 8.09

5.68 m 6.0 m *3.93 *3.93 3.64 *4.04 *2.39 *2.39 8.69
Arm 2.91 m 5.0 m *4.20 *4.20 3.60 *4.14 2.79 *3.40 2.21 *2.37 9.11
Bucket
4.0 m *5.15 *5.15 4.59 *4.70 3.52 *4.41 2.76 *4.26 2.04 *2.40 9.40
SAE, PCSA: 0.80 m3
Counterweight 3.0 m *7.89 *7.89 5.91 *6.23 4.41 *5.34 3.41 *4.79 2.69 4.35 1.94 *2.47 9.55
4 350 kg 2.0 m 7.80 *9.94 5.59 *7.35 4.22 *6.01 3.29 *5.22 2.62 4.27 1.90 *2.57 9.58
Shoe 600 mm 1.0 m 7.41 *7.44 5.33 *8.26 4.05 *6.62 3.18 5.21 2.55 4.19 1.90 *2.72 9.48
0 (Ground) 7.25 *7.97 5.16 8.80 3.92 6.53 3.09 5.11 2.50 4.13 1.96 *2.93 9.26
-1.0 m *4.43 *4.43 7.21 *10.65 5.07 8.70 3.84 6.44 3.04 5.05 2.46 4.09 2.09 *3.22 8.90
-2.0 m *5.14 *5.14 *8.27 *8.27 7.22 *11.13 5.05 8.67 3.81 6.41 3.01 5.02 2.45 4.08 2.32 *3.65 8.40
-3.0 m *9.15 *9.15 *10.49 *10.49 7.29 *10.44 5.07 *8.48 3.82 6.42 3.02 5.03 2.70 *4.37 7.69
-4.0 m *9.64 *9.64 *11.44 *11.44 7.40 *9.37 5.15 *7.69 3.88 *6.30 3.02 *4.37 6.71
-5.0 m *9.25 *9.25 7.58 *7.70 5.29 *6.31

Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

Mono Boom 7.0 m *3.04 *3.04 3.28 *3.70 7.48

5.68 m 6.0 m *4.44 *4.44 2.77 *3.62 8.13
Arm 2.42 m 5.0 m *4.93 *4.93 4.66 *4.67 3.55 *4.55 2.46 *3.62 8.59
Bucket
4.0 m *6.90 *6.90 *5.77 *5.77 4.52 *5.14 3.48 *4.78 2.72 4.37 2.27 *3.67 8.89
SAE, PCSA: 0.80 m3
Counterweight 3.0 m 5.78 *6.84 4.34 *5.75 3.38 *5.12 2.67 4.32 2.15 *3.77 9.05
4 350 kg 2.0 m 5.47 *7.89 4.16 *6.37 3.27 5.31 2.61 4.26 2.10 3.46 9.08
Shoe 600 mm 1.0 m 5.25 *8.64 4.01 6.63 3.17 5.19 2.55 4.19 2.11 3.49 8.98
0 (Ground) 5.12 8.76 3.91 6.51 3.09 5.11 2.51 4.14 2.18 3.62 8.75
-1.0 m 7.25 *8.98 5.08 8.70 3.85 6.45 3.05 5.06 2.49 4.12 2.35 3.87 8.37
-2.0 m *8.61 *8.61 7.29 *10.67 5.08 8.71 3.84 6.43 3.05 5.05 2.64 4.33 7.81
-3.0 m *8.64 *8.64 7.37 *9.82 5.13 *8.15 3.88 6.47 3.09 5.10 3.15 *4.72 7.03
-4.0 m *10.02 *10.02 7.51 *8.54 5.24 *7.12 3.97 *5.77
-5.0 m *6.49 *6.50 *5.20 *5.20

24
 ZX210H–3 Rating over-side or 360 degrees Rating over-front  Unit: 1 000 kg

Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

H-Boom 5.68 m 7.0 m *3.58 *3.58 *2.34 *2.34 8.09

H-Arm 2.91 m 6.0 m *3.79 *3.79 3.41 *3.90 2.26 *2.28 8.69
Bucket 5.0 m *4.07 *4.07 3.37 *3.99 2.58 *3.29 2.02 *2.27 9.11
SAE, PCSA: 0.80 m3
4.0 m *5.01 *5.01 4.31 *4.56 3.29 *4.27 2.54 4.03 1.85 *2.29 9.40
Counterweight
4 350 kg 3.0 m *7.74 *7.74 5.56 *6.08 4.13 *5.19 3.17 *4.65 2.48 3.97 1.76 *2.36 9.55
Shoe 600 mm 2.0 m 7.28 *9.77 5.23 *7.19 3.94 *5.86 3.05 4.87 2.41 3.89 1.71 *2.46 9.58
1.0 m 6.88 *7.27 4.97 *8.10 3.77 6.09 2.94 4.75 2.34 3.81 1.71 *2.61 9.48
0 (Ground) 6.73 *7.80 4.80 7.97 3.64 5.94 2.85 4.65 2.28 3.75 1.77 *2.82 9.26
-1.0 m *4.27 *4.27 6.69 *10.49 4.71 7.87 3.56 5.86 2.79 4.59 2.24 3.71 1.89 *3.12 8.90
-2.0 m *4.98 *4.98 *8.11 *8.16 6.70 *8.11 4.69 7.85 3.53 5.82 2.77 4.56 2.24 3.70 2.11 3.48 8.40
-3.0 m *8.99 *8.99 *10.49 *10.49 6.77 *10.49 4.71 7.88 3.54 5.83 2.78 4.57 2.48 4.04 7.69
-4.0 m *9.64 *9.64 *11.24 *11.24 6.88 *11.24 4.79 *7.52 3.60 5.90 3.17 *4.22 6.71
-5.0 m *9.06 *9.06 7.06 *9.06 4.93 *6.14

ZX210LCH–3
Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

H-Boom 5.68 m 7.0 m *3.58 *3.58 *2.34 *2.34 8.09

H-Arm 2.91 m 6.0 m *3.79 *3.79 3.83 *3.90 *2.28 *2.28 8.69
Bucket 5.0 m *4.07 *4.07 3.79 *3.99 2.93 *3.29 *2.27 *2.27 9.11
SAE, PCSA: 0.80 m3
4.0 m *5.01 *5.01 *4.56 *4.56 3.71 *4.27 2.89 *4.11 2.13 *2.29 9.40
Counterweight
4 750 kg 3.0 m *7.74 *7.74 *6.08 *6.08 4.66 *5.19 3.59 *4.65 2.83 *4.31 2.03 *2.36 9.55
Shoe 600 mm 2.0 m 8.30 *9.77 5.93 *7.19 4.46 *5.86 3.47 5.07 2.76 4.50 1.98 *2.46 9.58
1.0 m *7.27 *7.27 5.66 *8.10 4.29 *6.47 3.36 5.47 2.68 4.42 1.99 *2.61 9.48
0 (Ground) 7.73 *7.80 5.48 *8.65 4.16 *6.90 3.27 5.40 2.63 4.36 2.06 *2.82 9.26
-1.0 m *4.27 *4.27 7.69 *10.49 5.39 *8.85 4.07 6.83 3.21 5.33 2.59 4.31 2.19 *3.12 8.90
-2.0 m *4.98 *4.98 *8.11 *8.16 7.71 *8.11 5.37 *8.73 4.04 6.79 3.18 5.30 2.58 4.31 2.43 *3.55 8.40
-3.0 m *8.99 *8.99 *10.49 *10.49 7.77 *10.49 5.40 *8.31 4.05 6.80 3.20 5.32 2.84 *4.20 7.69
-4.0 m *9.64 *9.64 *11.24 *11.24 7.89 *11.24 5.47 *7.52 4.12 *6.14 3.61 *4.22 6.71
-5.0 m *9.06 *9.06 *7.52 *9.06 5.62 *6.14

ZX210K–3
Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

K-Boom 5.68 m 7.0 m *3.71 *3.71 *2.94 *2.94 *2.32 *2.32 8.09
K-Arm 2.91 m 6.0 m *3.76 *3.76 3.70 *3.87 *2.26 *2.26 8.69
Bucket 5.0 m *4.03 *4.03 3.66 *3.96 2.82 *3.27 2.23 *2.25 9.12
SAE, PCSA: 0.80 m3
4.0 m *4.98 *4.98 *4.52 *4.52 3.58 *4.23 2.79 *4.08 2.06 *2.28 9.40
Counterweight
5 350 kg 3.0 m *7.70 *7.70 6.01 *6.04 4.49 *5.15 3.46 *4.61 2.73 *4.28 1.95 *2.34 9.55
Shoe 600 mm 2.0 m 7.89 *9.71 5.68 *7.14 4.29 *5.82 3.34 *5.03 2.65 *4.21 1.91 *2.45 9.58
1.0 m *7.26 *7.26 5.41 *8.05 4.12 *6.42 3.23 5.13 2.58 4.13 1.91 *2.60 9.48
0 (Ground) 7.33 *7.79 5.24 8.59 3.99 6.42 3.14 5.03 2.52 4.07 1.97 *2.81 9.26
-1.0 m *4.26 *4.26 7.29 *10.48 5.15 8.49 3.91 6.33 3.08 4.97 2.48 4.03 2.11 *3.10 8.91
-2.0 m *4.94 *4.94 *8.06 *8.06 7.31 *10.89 5.13 8.47 3.87 6.29 3.05 4.94 2.48 4.02 2.34 *3.53 8.39
-3.0 m *8.93 *8.93 *10.75 *10.75 7.37 *10.19 5.16 *8.26 3.89 6.30 3.07 4.95 2.74 *4.18 7.69
-4.0 m *9.95 *9.95 *11.17 *11.17 7.49 *9.12 5.23 *7.47 3.95 *6.10 3.48 *4.18 6.71
-5.0 m *9.00 *9.00 *7.47 *7.47 5.38 *6.09

ZX210LCK–3
Load radius
Load At max. reach
Conditions point 2.0 m 3.0 m 4.0 m 5.0 m 6.0 m 7.0 m 8.0 m
height
meter

K-Boom 5.68 m 7.0 m *3.71 *3.71 *2.94 *2.94 *2.32 *2.32 8.09
K-Arm 2.91 m 6.0 m *3.76 *3.76 *3.87 *3.87 *2.26 *2.26 8.69
Bucket 5.0 m *4.03 *4.03 *3.96 *3.96 3.13 *3.27 *2.25 *2.25 9.11
SAE, PCSA: 0.80 m3
4.0 m *4.98 *4.98 *4.52 *4.52 3.95 *4.23 3.09 *4.08 *2.28 *2.28 9.40
Counterweight
5 350 kg 3.0 m *7.70 *7.70 *6.04 *6.04 *5.15 *5.15 3.83 *4.61 3.03 *4.28 2.19 *2.34 9.55
Shoe 600 mm 2.0 m 8.82 *9.71 6.30 *7.14 4.75 *5.82 3.71 *5.03 2.95 *4.21 2.14 *2.45 9.58
1.0 m *7.26 *7.26 6.03 *8.05 4.57 *6.42 3.59 5.13 2.88 4.13 2.15 *2.60 9.48
0 (Ground) *7.79 *7.79 5.85 8.59 4.44 6.42 3.50 5.03 2.82 4.07 2.22 *2.81 9.26
-1.0 m *4.26 *4.26 8.20 *10.48 5.76 8.49 4.36 6.33 3.44 4.97 2.78 4.03 2.37 *3.10 8.90
-2.0 m *4.94 *4.94 *8.06 *8.06 8.22 *10.89 5.74 8.47 4.33 6.29 3.41 4.94 2.78 4.02 2.62 *3.53 8.40
-3.0 m *8.93 *8.93 *10.75 *10.75 8.28 *10.19 5.76 *8.26 4.34 6.30 3.43 4.95 3.05 *4.18 7.69
-4.0 m *9.95 *9.95 *11.17 *11.17 8.40 *9.12 5.84 *7.47 4.40 *6.10 3.86 *4.18
-5.0 m *9.00 *9.00 *7.47 *7.47 5.99 *6.09

25
EQUIPMENT

STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details.

ENGINE CAB MONITOR SYSTEM UNDERCARRIAGE

- H/P mode control - CRES II (Center pillar reinforced - Display of meters: water - Travel parking brake
- E mode control structure) cab temperature, hour, fuel rate, clock - Travel motor covers
- 50 A alternator - OPG top guard fitted Level I - Other displays: work mode, auto- - 1 track guard (each side) and
- Dry-type air filter with evacuator (ISO10262) compliant cab idle, glow, rearview monitor (when hydraulic track adjuster
valve (with air filter restriction switch - All-weather sound suppressed optional rear view camera is - Bolt-on sprocket
for monitor) steel cab equipped), operating conditions, - Upper and lower rollers
- Cartridge-type engine oil filter - Equipped with reinforced, tinted etc - Reinforced track links with pin seals
- Fuel double filters (green color) glass windows - Alarms: overheat, engine warning, - 4 tie down hooks
- Air cleaner double filters - Upper front window can be opened engine oil pressure, alternator, - 600 mm triple grouser shoes
- Radiator, oil cooler and intercooler - 4 fluid-filled elastic mounts minimum fuel level, hydraulic filter
with dust protective net - Intermittent windshield wipers restriction, air filter restriction, work FRONT ATTACHMENTS
- Radiator reserve tank - Front window washer mode, overload, etc - HN bushing
- Fan guard - Adjustable reclining seat with - Alarm buzzers: overheat, engine oil - WC (tungsten-carbide) thermal
- Isolation-mounted engine adjustable armrests pressure, overload spraying
- Auto-idle system - Footrest - Reinforced resin thrust plate
- Fuel cooler - Electric double horn LIGHTS - Flanged pin
- Electrical fuel feed pump - AM-FM radio with digital clock - 2 working lights - Casted bucket link A
- Engine oil drain coupler - Auto control air conditioner - Centralized lubrication system
- Retractable seat belt UPPERSTRUCTURE - Dirt seal on all bucket pins
HYDRAULIC SYSTEM - Drink holder - Bucket clearance adjust
- Undercover
- Work mode selector - Cigarette lighter mechanism
- 4 350 kg counterweight
- Power boost - Ashtray - 2.91 m arm
- Fuel level float
- Auto power lift - Storage box - 0.80 m3 (SAE, PCSA heaped)
- Hydraulic oil level gauge
- Extra port for control valve - Glove compartment bucket
- Tool box
- Suction filter - Floor mat
- Utility space
- Full-flow filter - Short wrist control levers MISCELLANEOUS
- Rear view mirror (right & left side)
- Pilot filter - Pilot control shut-off lever - Standard tool kit
- Swing parking brake
- Swing dampener valve - Engine shut-off switch - Lockable machine covers
- Lockable fuel refilling cap
- Skid-resistant tapes, plates and
handrails
- Travel direction mark on track
frame
- Onboard information controller
- Theft deterrent system
ZX210H-3 / ZX210LCH-3 ZX210K-3 / ZX210LCK-3
(Heavy-duty version) (Demolition version)
- 5.68 m H-boom and 2.91 m H-arm - K-cab (CRESII cab with overhead
- Damage prevention plate and window and guard)
square bars - 5.68 m K-boom and 2.91 m K-arm
- 0.80 m3 (SAE, PCSA heaped) - 0.80 m3 (SAE, PCSA heaped)
H-reinforced bucket K-reinforced bucket
- Reinforced link B - Reinforced link B for demolition
- Front glass lower guard - Reinforced bucket cylinder
- 6.0 mm thickness undercover - Front glass lower guard
- 4 750 kg counterweight - Twin wiper
- 600 mm reinforced triple grouser - Attachment basic piping
shoe - Damage prevention plate
- Reinforced track guard (2 units - 6.0 mm thickness undercover
each side) - Track undercover
- Reinforced lower flange - 600 mm reinforced triple grouser
- Reinforced idler bracket shoe
- Reinforced side steps (bolt - 5 350 kg counterweight
mounted) - High-performance full-flow filter
- Auto control air conditioner (with restriction indicator)
- Front screen of fuel cooler and air
condenser
- Reinforced lower flange
- Reinforced idler bracket
- Reinforced side step (bolt mounted)

26
OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details.

- Suspension seat - Tropical cover - Front glass lower guard

- Hose rupture valves - Attachment basic piping - Front glass upper guard
- Electric fuel refilling pump with auto - Accessories for breaker - K-cab (CRES II cab with overhead window and guard)
stop - Accessories for breaker & crusher - 600 mm reinforced triple grouser shoes
- Swing motion alarm device with - Accessories for 2 speed selector - Full track guard
lamps - Rear light - Additional work light (boom right side)
- Travel motion alarm device - Additional light (on the top of the cab)
- Rear view camera - 12 V power source
- Additional pump - Assist piping
- Transparent roof - Pilot accumulator
- Pre-cleaner - Rain guard
- Front screen of fuel cooler and air condenser
- Louver cover
Designed to increase ventilation

- Tropical cover
Designed for use in the Tropics (severely hot climate), with extra wide
opening for more heat dissipation, thus reducing sound suppression. The
machine fitted with this cover cannot pass EU Noise Regulation 2000/14/
EC,STAGE II, not permitting the use of the CE mark

27
 These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in color and features.
Before use, read and understand the Operator’s Manual for proper operation.

Hitachi Construction Machinery Co., Ltd.

KS-EN006R 09.07 (KA/KA,GT3)
www.hitachi-c-m.com
Printed in Japan