Scribd
Upload
90 views1 page

Advanced Beam Smoke Detector Guide

The ESP FIREbeam is an analogue addressable beam smoke detector that features self-aligning technology to correct for building movement. It has a detection range of 5-40m standard but can be extended up to 100m with additional reflector kits. The detector continually monitors its alignment and will automatically re-align if any movement occurs. It connects to the ESP analogue addressable loop and can be commissioned and maintained from ground level using a separate controller unit.

Uploaded by

Chaos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
90 views1 page

Advanced Beam Smoke Detector Guide

The ESP FIREbeam is an analogue addressable beam smoke detector that features self-aligning technology to correct for building movement. It has a detection range of 5-40m standard but can be extended up to 100m with additional reflector kits. The detector continually monitors its alignment and will automatically re-align if any movement occurs. It connects to the ESP analogue addressable loop and can be commissioned and maintained from ground level using a separate controller unit.

Uploaded by

Chaos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Analogue Addressable Beam Smoke Detector

ESP FIREbeam

Features
 Continually corrects itself against building
movement

 Controlled and adjusted from ground level utilising


included controller

 5 - 40m standard detection range

 Extensions kits available to enhance detection


range up to 100m

 Fully compatible with the Hochiki ESP analogue


addressable protocol

Description
The ESP FIREbeam is a reflective beam Smoke Detector which features advanced motorised
technology allowing it to self-align itself to the centre of the reflector when commissioning.
Commissioning is a semi-automatic procedure where the unit aligns itself directly onto the centre
of the reflector. Once commissioned the detector continually monitors alignment and will
automatically realign itself back to the centre of the reflector if any building movement occurs.

The detector comes with a separate controller unit which allows engineers to commission, monitor
and maintain from ground level. Detection range is 40m for the standard unit, increasing to 80m
or 100m with the addition of the medium or long-range reflector kits

The ESP FIREbeam features an integral CHQ-POM module allowing full connectivity to the ESP
analogue addressable loop.

Specification
ESP FIREBEAM (Detector, Controller & Reflector 5 to 40m)
Ordering codes 40KIT80 (Mid-Range Reflector Kit 40 to 80m)
80KIT100 (Long Range Reflector Kit 80 to 100m)
Supply Current 3mA (constant current) in all operational states
Operating Temperature Range -10°C to +55°C
Operating Humidity 10 to 95% RH Non-condensing
Ingress Protection Rating IP65 (when suitably mounted and terminated)
Optical Wavelength 870nm
Maximum Angular Alignment ±15°
Beam Head ±0.75°
Maximum Angular Misalignment
Reflector ±2° (static not auto-aligning)
25%(1.25dB) to 50%(3dB) in 1%(0.05dB) increments
Alarm Sensitivity Levels
(default 35% (1.87dB))
Detector 1.1 / 180H x 155W x137D
Weight (Kg) / Dimensions (mm)
Controller 0.55 / 185H x 120W x 62D

Hochiki Europe (UK) Ltd. reserves the right to alter the specification of its products from time to time without notice. Although every effort has
been made to ensure the accuracy of the information contained in this document it is not warranted or represented by Hochiki Europe (UK) Ltd.
to be a complete and up-to-date description.

You might also like