PRODUCT CATALOG 2019 | EN

Legal notice

© OLIGO Lichttechnik GmbH - surface controls, Lenzen 03/2019

The contents of this publication may not be copied or passed on, neither in full nor in part, without written
permission of OLIGO Lichttechnik GmbH - surface controls. All content specifications, drawings, images etc.
are subject to copyright protection laws.

OLIGO Lichttechnik GmbH - surface controls, Lange Felder 6, 19309 Lenzen - Germany
 3

Content
Product catalog

Surface inspection with Surface inspection

Sunlight simulation.......page 37
LED technology ..............page 9 (T5/T8).............................page 19

Controllers and
Color matching..............page 45 Workplace illumination.... page 49
accessories ...................page 57

Design versions.............page 73 Order number catalog...page 77 References.....................page 89

4

When it comes to the highest surface and color quality, Using a patented optical method, light is projected at
visual control systems are essential. The „surface metal and painted surfaces in a targeted manner so
controls“ business area of OLIGO Lichttechnik GmbH that our visual systems, which focus on defect ana-
focuses on cutting-edge technology and is the global lysis, can detect every surface flaw and color error.
leader for high-precision surface control and color   Whether its the tiniest inclusion, minimal irregu-
matching systems. larities in the paint applied or partial, barely noti-
  Out technical staff at our Lenzen and Gersthofen ceable differences in color matching - our company‘s
sites develops, manufactures and distributes products ambition is clear: provide the highest quality of lighting
that can be used in individual audit sites as well as for technology and its on-site application.
up to 150-meter light tunnel systems.

Fig.: Headquarter in Lenzen, Brandenburg

 5

Fig.: Technology Centre South in the Bavarian Gersthofen

6

Everything from a single source

OLIGO LichttechnikGmbH -surface controls considers

itself your contact for lighting-technical consulting in
advance, during and after installation of the systems or
components.

Adjusted to your demands:

▪▪ Planning and concept
▪▪ Production of light-technical calculations and CAD
drawings or visualization
▪▪ Production of assembly and installation plans
▪▪ Installation
▪▪ Training for correct use of the optics and their
controllers

Fig.: Solutions exactly to customer requirements

Our certifications for maintenance of highest quality

claims to material and processing:

▪▪ Quality managementsystem in accordance

with DIN EN ISO9001
▪▪ Certified by TÜV-CERT
▪▪ Europe-wide ENEC-sign
▪▪ ETL-certification (Canada & USA)
▪▪ EAC certification

Fig.: Light tunnel in the top coat area

 7

Fig.: Color matching cabin Fig.: Visualizations: project-related and individual

Fig.: Audit control site

8
 9

Surface inspection with LED technology

L D L D L D L D

LPS50 PM LPS100 PM VAO PM WLO PM

Shows the blisters, bubbles, blisters, bubbles, blisters, bubbles, blisters, bubbles,
following dents, pits, dents, pits, dents, pits, dents, pits,
defects and has scratches, paint scratches, paint scratches, paint scratches,
the following runs, dirt runs, dirt runs, dirt, paint orange peel
special features defects

page 10 12 14 16

Very low reflection level Low reflection level High to very high reflection
(e.g. press plant, body shell) (e.g. KTL, fillers, grinding level
stations, preparation for top coat (e.g. top coat of paint, finish,
of paint) audit)

LPS50 PM - puremaxLED®

LPS100 PM - puremaxLED®

VAO PM - puremaxLED®

WLO PM - puremaxLED®
10

LPS50 PM - LPS50 puremaxLED®

BRILLIANT AND ENERGY EFFICIENT

The surface control optic LPS50 PM is used for sur-

faces with low to medium reflection and can be em-
ployed in all coating processes in the industry.

Suitable for the following areas, especially in the

automotive sector: press plants, body shell areas,
topcoat preparation and for cathodic dip painting/
filler grinding stations

≤18 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 4 x LED lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 4 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
LED controller ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 4 x centrally arranged patented
prism panes with plano-convex Protection class I
lens and black fields
▪▪ 4 x symmetrical reflectors, reflector UGR limit ≤18
chambers separated with regards
to light Options

Housing ▪▪ Steel sheet ▪▪ With installation frame

▪▪ RAL7035 powder coated ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Front glass ▪▪ 6 mm one-panel safety glass ▪▪ Additional housing colors according to RAL
panel (lockable according to EN 12150 ▪▪ Connection cable in other lengths
door) ▪▪ Frameless design
Quality criteria
Opening ▪▪ 3 x quick-lock systems
▪▪ Photobiological safety (EN 62471): Risk group 1
Bushing ▪▪ Harting plug system or direct ▪▪ LABS-free
clamping in junction box ▪▪ CE label
▪▪ 3 m connection cable ▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection with LED technology 11

LPS50 PM
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

4 x 40 watt
65

130

650 / 1260 / 1560

390 / 1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of LPS50 PM

700

860
(LPS50 puremaxLED®). This chart shows the
light distribution curve of an LPS50 PM with
Exterior and mounting dimensions of the LPS50 PM. All data in mm. 4 x 40 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L601LD401 4 x 25 watt Harting connector system high polish 860 x 1560 x 65 approx. 50.5

L601LD402 4 x 40 watt Harting connector system high polish 860 x 1560 x 65 approx. 52.0

L601LD403 4 x 20 watt Harting connector system high polish 860 x 1260 x 65 approx. 40.5

L601LD404 4 x 32 watt Harting connector system high polish 860 x 1260 x 65 approx. 41.5

L601LD405 4 x 10 watt Harting connector system high polish 860 x 650 x 65 approx. 23.0

*Additional design versions on page 77

www.surface-controls.de
12

LPS100 PM - LPS100 puremaxLED®

BRILLIANT AND ENERGY EFFICIENT

The surface control optic LPS100 PM is used for

surfaces with medium to high reflection and can be
employed in all coating processes in the industry.

Particularly in the automotive sector, it is suitable for:

topcoat, assembly and audit sites

≤17 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 3 x LED lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 2 x 6,500 K, 1 x 4,000 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
LED controller ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 3 x centrally arranged patented
prism panes with plano-convex Protection class I
lens and black fields
▪▪ 3 x symmetrical reflectors, reflector UGR limit ≤17
chambers separated with regards
to light Options

Housing ▪▪ Steel sheet ▪▪ With installation frame

▪▪ RAL7035 powder coated ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Front glass ▪▪ 6 mm one-panel safety glass ▪▪ Additional housing colors according to RAL
panel (lockable according to EN 12150 ▪▪ Connection cable in other lengths
door) ▪▪ Frameless design
Quality criteria
Opening ▪▪ 3 x quick-lock systems
▪▪ Photobiological safety (EN 62471): Risk group 1
Bushing ▪▪ Harting plug system or direct ▪▪ LABS-free
clamping in junction box ▪▪ CE label
▪▪ 3 m connection cable ▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection with LED technology 13

LPS100 PM
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

3 x 40 watt
65

130

650 / 1260 / 1560

390 / 1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of LPS100 PM

700

860
(LPS100 puremaxLED®). This chart shows
the light distribution curve of an LPS100 PM
Exterior and mounting dimensions of the LPS100 PM. All data in mm. with 3 x 40 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L601LD301 3 x 25 watt Harting connector system high polish 860 x 1560 x 65 approx. 46.0

L601LD302 3 x 40 watt Harting connector system high polish 860 x 1560 x 65 approx. 47.5

L601LD303 3 x 20 watt Harting connector system high polish 860 x 1260 x 65 approx. 39.0

L601LD304 3 x 32 watt Harting connector system high polish 860 x 1260 x 65 approx. 40.0

L601LD305 3 x 10 watt Harting connector system high polish 860 x 650 x 65 approx. 22.0

*Additional design versions on page 77

www.surface-controls.de
14

VAO PM - VAO puremaxLED®

ENERGY EFFICIENCY with slimline design

The surface control optic VAO is used for surfaces

with medium to high reflection and can be em-
ployed in all coating processes in the industry. It
stands out with its slimline design.

Particularly in the automotive sector, it is suitable

for: topcoat, assembly and audit sites

≤17 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 1 x LED lamp (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 1 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
LED controller ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 1 x centrally arranged patented
prism pane with plano-convex lens Protection class I
▪▪ 1 x symmetrical reflector
UGR limit ≤17
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated Options

Front glass ▪▪ 6 mm one-panel safety glass ▪▪ With installation frame

panel (lockable according to EN 12150 ▪▪ With mobile stand
door) ▪▪ Frameless design ▪▪ Additional lamp color temperatures
▪▪ Additional housing colors according to RAL
Opening ▪▪ 3 x quick-lock systems ▪▪ Connection cable in other lengths

Bushing ▪▪ Harting plug system or direct Quality criteria

clamping in junction box
▪▪ 3 m connection cable ▪▪ Photobiological safety (EN 62471): Risk group 1
▪▪ LABS-free
▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection with LED technology 15

VAO PM
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

1 x 40 watt
65

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of VAO PM (VAO

124
puremaxLED®). This chart shows the
284
light distribution curve of a VAO PM with
Exterior and mounting dimensions of the VAO PM. All data in mm. 1 x 40 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L601LD321 1 x 25 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.0

L601LD322 1 x 40 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.0

L601LD323 1 x 20 watt Harting connector system high polish 284 x 1260 x 65 approx. 15.5

L601LD324 1 x 32 watt Harting connector system high polish 284 x 1260 x 65 approx. 15.5

*Additional design versions on page 77

www.surface-controls.de
16

WLO PM - WLO puremaxLED®

Energy efficient light with enhanced contrast

The surface control optic WLO PM is used for

surfaces with low to medium reflection and can be
employed in all coating processes in the industry.
It generates a high-contrast reflection image and
is strongly shielded to reduce glare in a direct and
lateral viewing direction.

Suitable for the following areas, especially in

the automotive sector: press plants, topcoat
preparation and finishing area

≤15 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 4 x LED lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 4 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
LED controller ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 4 x centrally arranged patented
prism panes with plano-convex Protection class I
lens and black fields
▪▪ 4 x symmetrical reflectors, reflector UGR limit ≤15
chambers separated with regards
to light Options

Housing ▪▪ Steel sheet ▪▪ With installation frame

▪▪ RAL7035 powder coated ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Front glass ▪▪ 6 mm one-panel safety glass ▪▪ Additional housing colors according to RAL
panel (lockable according to EN 12150 ▪▪ Connection cable in other lengths
door) ▪▪ Frameless design
Quality criteria
Opening ▪▪ 3 x quick-lock systems
▪▪ Photobiological safety (EN 62471): Risk group 1
Bushing ▪▪ Harting plug system or direct ▪▪ LABS-free
clamping in junction box ▪▪ CE label
▪▪ 3 m connection cable ▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection with LED technology 17

WLO PM
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

4 x 40 watt
65

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of WLO PM

700

860
(WLO puremaxLED®). This chart shows the
light distribution curve of a WLO PM with
Exterior and mounting dimensions of the WLO PM. All data in mm. 4 x 40 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L602LD401 4 x 25 watt Harting connector system high polish 860 x 1560 x 65 approx. 50.0

L602LD402 4 x 40 watt Harting connector system high polish 860 x 1560 x 65 approx. 52.0

L602LD403 4 x 20 watt Harting connector system high polish 860 x 1260 x 65 approx. 40.5

L602LD404 4 x 32 watt Harting connector system high polish 860 x 1260 x 65 approx. 41.5

www.surface-controls.de
18

LPS50 LPS100

Shows the blisters, bubbles, blisters,

following dents, pits, bubbles, dents,
defects and has scratches, paint pits, scratches,
the following runs, dirt paint runs, dirt
special features

page 20 22
 19

Surface inspection (T5/T8)

VAO WLO MRO LLO UVO FLO

blisters, blisters, bubbles, blisters, bubbles, blisters, bubbles, voids blisters,

bubbles, dents, dents, pits, dents, paint runs, dents bubbles, dents
pits, scratches, scratches, dirt, color defects
paint runs, dirt Orangenhaut,
Paint defects Paint defects

24 26 28 30 32 34

Very low reflection level Low reflection level High to very high reflection
(e.g. press plant, body shell) (e.g. KTL, fillers, grinding level
stations, preparation for top coat (e.g. top coat of paint, finish,
of paint) audit)

LPS50 - LensPrismDarkfieldOptic

LPS100 - LensPrismDarkfieldOptic

VAO - VarioOptic

WLO - SwitchLineOptic

MRO - MultiReflexOptic

LLO - LackLusterOptic

UVO - UVOptic

FLO - FlatLightOptic
20

LPS50 - LensPrismDarkfieldOptic
Quick, reliable and consistent defect detection

The surface control optic LPS50 is used for surfaces

with low to medium reflection and can be employed
in all coating processes in the industry.

Suitable for the following areas, especially in the

automotive sector: press plants, body shell, topcoat
preparation, cathodic dip painting/filler grinding
stations, audit sites and others areas...

≤17 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 4 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 4 x 6,500K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 4 x centrally arranged patented
prism panes with plano-convex Protection class I
lens and black fields
▪▪ 4 x symmetrical reflectors, reflector UGR limit ≤17
chambers separated with regards
to light Options

Housing ▪▪ Steel sheet ▪▪ With installation frame

▪▪ RAL7035 powder coated ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Front glass ▪▪ 6 mm one-panel safety glass ▪▪ Additional housing colors according to RAL
panel (lockable according to EN 12150 ▪▪ Connection cable in other lengths
door) ▪▪ Frameless design
Quality criteria
Opening ▪▪ 3 x quick-lock systems
▪▪ Photobiological safety (EN 62471): Risk group 0
Bushing ▪▪ Cable gland or direct clamping in ▪▪ LABS-free
junction box ▪▪ CE label
▪▪ 4 m connection cable ▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection (T5 / T8) 21

LPS50
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

4 x 58 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of LPS50

700

860
(LensPrismDarkfieldOptic). This chart shows
the light distribution curve of an LPS50 with
Exterior and mounting dimensions of the LPS50. All data in mm. 4 x 58 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L201AE001 4 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 45.5

L201AE002 4 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

L201AE003 4 x 36 watt Harting connector system white 860 x 1260 x 100 approx. 38.0

L201AE004 4 x 36 watt Harting connector system high polish 860 x 1260 x 100 approx. 38.0

L201AE005 4 x 80 watt Harting connector system white 860 x 1560 x 100 approx. 45.5

L201AE006 4 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

*Additional design versions on page 77

www.surface-controls.de
22

LPS100 - LensPrismDarkfieldOptic
Quick, reliable and consistent defect detection

The surface control optic LPS100 is used for

surfaces with medium to high reflection and can be
employed in all coating processes in the industry.

Particularly in the automotive sector, it is suitable

for: topcoat, assembly and audit sites as well as
other areas...

≤14 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 3 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 2 x 6,500 K, 1 x 4,000 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 3 x centrally arranged patented
prism panes with plano-convex Protection class I
lens and black fields
▪▪ 3 x symmetrical reflectors, reflector UGR limit ≤14
chambers separated with regards
to light Options

Housing ▪▪ Steel sheet ▪▪ With installation frame

▪▪ RAL7035 powder coated ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Front glass ▪▪ 6 mm one-panel safety glass ▪▪ Additional housing colors according to RAL
panel (lockable according to EN 12150 ▪▪ Connection cable in other lengths
door) ▪▪ Frameless design
Quality criteria
Opening ▪▪ 3 x quick-lock systems
▪▪ Photobiological safety (EN 62471): Risk group 0
Bushing ▪▪ Cable gland or direct clamping in ▪▪ LABS-free
junction box ▪▪ CE label
▪▪ 3 m connection cable ▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection (T5 / T8) 23

LPS100
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

3 x 58 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of LPS100 (LensPris-

700

860
mDarkfieldOptic). This chart shows the
light distribution curve of an LPS100 with
Exterior and mounting dimensions of the LPS100. All data in mm. 3 x 58 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L201AC001 3 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 44.0

L201AC002 3 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.0

L201AC003 3 x 36 watt Harting connector system white 860 x 1260 x 100 approx. 37.0

L201AC004 3 x 36 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.0

L201AC005 3 x 80 watt Harting connector system white 860 x 1560 x 100 approx. 44.5

L201AC006 3 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.5

*Additional design versions on page 77

www.surface-controls.de
24

VAO - VarioOptic
Reliable defect detection in slimline design

The surface control optic VAO is used for surfaces

with low to high reflection and can be employed in
all coating processes in the industry.

Particularly in the automotive sector, it is suitable

for: topcoat, assembly and audit sites, body shell,
topcoat preparation and other processes...

≤17 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 1 x luminescent lamp (included), Permitted ambient +5°C to +35°C

(According to the 1 x 6,500 K temperature
design version) or
▪▪ 2 x luminescent lamps (included), Rated voltage 220-240 V, 50/60 Hz
2 x 6,500 K
Degree of protection IP54
Ballast ▪▪ Electronic, digitally dimmable
Protection class I
Optic ▪▪ 1 x centrally arranged patented
prism pane with plano-convex UGR limit ≤17
lens
▪▪ 1 x symmetrical reflector, Options
asymmetrical irradiation possible
by adjusting mounting fixture ▪▪ With installation frame
▪▪ With mobile stand
Housing ▪▪ Steel sheet ▪▪ Pivotal design version available
▪▪ RAL7035 powder coated ▪▪ Additional lamp color temperatures
▪▪ Additional housing colors according to RAL
Front glass ▪▪ 6 mm one-panel safety glass ▪▪ Connection cable in other lengths
panel (lockable according to EN 12150
door) ▪▪ Frameless design Quality criteria

Opening ▪▪ 3 x quick-lock systems ▪▪ Photobiological safety (EN 62471): Risk group 0

▪▪ LABS-free
Bushing ▪▪ Cable gland or direct clamping in ▪▪ CE label
junction box ▪▪ ENEC certification
▪▪ 3 m connection cable ▪▪ EAC certification
 Surface inspection (T5 / T8) 25

VAO
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

1 x 58 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of VAO (VarioOptic).

124
This chart shows the light distribution curve
284
of a VAO with 1 x 58 watt.
Exterior and mounting dimensions of the VAO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L201AK001 2 x 58 watt Harting connector system white 284 x 1560 x 100 approx. 18.5

L201AK002 2 x 58 watt Harting connector system high polish 284 x 1560 x 100 approx. 18.5

L201AK003 2 x 36 watt Harting connector system white 284 x 1260 x 100 approx. 17.0

L201AK004 2 x 36 watt Harting connector system high polish 284 x 1260 x 100 approx. 17.0

L201AM001 1 x 58 watt Harting connector system white 284 x 1560 x 100 approx. 18.0

L201AM003 1 x 36 watt Harting connector system white 284 x 1260 x 100 approx. 16.5

*Additional design versions on page 77

www.surface-controls.de
26

WLO - SwitchLineOptic
Light dependent on viewing angle with enhanced contrast

The surface control optic WLO is used for surfaces

with low to high reflection and can be employed in all
coating processes in the industry. It generates a high-
contrast reflection image and is strongly shielded to
reduce glare in a direct and lateral viewing direction.

Suitable for the following areas, especially in the

automotive sector: press plants, topcoat preparation,
finishing area as well as other areas...

≤15 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 4 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 2 x 6,500 K, 2 x 4,000 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 4 x centrally arranged patented
prism panes with plano-convex Protection class I
lens and black fields
▪▪ 4 x symmetrical reflectors, re- UGR limit ≤15
flector chambers separated with
regards to light Options

Housing ▪▪ Steel sheet ▪▪ With installation frame

▪▪ RAL7035 powder coated ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Front glass ▪▪ 6 mm one-panel safety glass ▪▪ Additional housing colors according to RAL
panel (lockable according to EN 12150 ▪▪ Connection cable in other lengths
door) ▪▪ Frameless design
Quality criteria
Opening ▪▪ 3 x quick-lock systems
▪▪ Photobiological safety (EN 62471): Risk group 0
Bushing ▪▪ Cable gland or direct clamping in ▪▪ LABS-free
junction box ▪▪ CE label
▪▪ 3 m connection cable ▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection (T5 / T8) 27

WLO
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

4 x 58 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of WLO

700

860
(SwitchLineOptic). This chart shows the light
distribution curve of a WLO with 4 x 58 watt.
Exterior and mounting dimensions of the WLO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L202AC001 4 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

L202AC003 4 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

L202AC004 4 x 54 watt Harting connector system high polish 860 x 1260 x 100 approx. 38.5

www.surface-controls.de
28

MRO - MultiReflexOptic
Surface control with simultaneous color evaluation

The surface control optic MRO is used for controlling

surfaces with high reflection and is conditionally
suitable for color matching. It can be employed in all
coating processes in the industry.

Particularly in the automotive sector, it is suitable

for: topcoat, assembly and audit sites as well as
other areas...

≤14 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 4 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 2 x 2,700 K, 2 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ Asymmetrical high-polish reflectors
with multi-level distribution Protection class I

Housing ▪▪ Steel sheet UGR limit ≤14

▪▪ RAL7035 powder coated
▪▪ Door frame RAL9005, powder
coated Options

Front glass ▪▪ 4 mm one-panel safety glass ▪▪ With mobile stand

panel (lockable according to EN 12150 ▪▪ Additional lamp color temperatures
door) ▪▪ In door frame ▪▪ Additional housing colors according to RAL
▪▪ Connection cable in other lengths
Opening ▪▪ 3 x quick-lock systems

Bushing ▪▪ Harting plug system or direct Quality criteria

clamping in junction box
▪▪ 4 m connection cable ▪▪ Photobiological safety (EN 62471): Risk group 0
▪▪ LABS-free
▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection (T5 / T8) 29

MRO
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

4 x 58 watt
218

130
4 x M8 (Internal thread)

1560
1300
130

Light distribution curve of MRO (MultiReflex-

700

860
Optic). This chart shows the light distribution
curve of an MRO with 4 x 58 watt.
Exterior and mounting dimensions of the MRO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L203AC001-14 4 x 58 watt Cable gland high polish 860 x 1560 x 218 approx. 56.0

www.surface-controls.de
30

LLO - LackLusterOptic
High-polish surfaces appear matt

The surface control optic LLO is used for controlling

surfaces with high to very high reflection. It allows
high-polish surfaces to appear matt. The LLO
can be employed in all coating processes in the
industry.

Particularly in the automotive sector, it is suitable

for: body shell defects on painted parts

≤9 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 2 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 2 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 1 x white reflector, distribution
across levels Protection class I
▪▪ 1 x optical prism diffusor
UGR limit ≤9
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated
▪▪ Door frame RAL9005, powder Options
coated
▪▪ With mobile stand
Front glass ▪▪ 4 mm one-panel safety glass ▪▪ Additional lamp color temperatures
panel (lockable according to EN 12150 ▪▪ Additional housing colors according to RAL
door) ▪▪ Opaline with special print optics ▪▪ Connection cable in other lengths
▪▪ In door frame

Opening ▪▪ 3 x quick-lock systems Quality criteria

Bushing ▪▪ Cable gland or direct clamping in ▪▪ Photobiological safety (EN 62471): Risk group 0
junction box ▪▪ LABS-free
▪▪ 4 m connection cable ▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection (T5 / T8) 31

LLO
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

2 x 58 watt
218

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of LLO

700

860
(LackLusterOptic). This chart shows the light
distribution curve of an LLO with 2 x 58 watt.
Exterior and mounting dimensions of the LLO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L207AC003-14 2 x 58 watt Harting connector system white 860 x 1560 x 218 approx. 54.0

L207AC004-14 2 x 36 watt Harting connector system white 860 x 1260 x 218 approx. 46.5

www.surface-controls.de
32

UVO - UVOptic
Florescence optics for effect paints, textiles and plastics

The surface control optic UVO is used for surfaces

with high reflection. White voids on surfaces are
visible thanks to UV light.

Particularly in the automotive sector, it is suitable

for: effect paints, textiles, plastics and other
materials...

LABS
FREE

Features Technical specifications

Assembly ▪▪ 1 x UV fluorescent lamp Permitted ambient +5°C to +35°C

(According to the (included) temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 1 x frequency-neutral diffuser
▪▪ 1 x symmetrical reflector, high Protection class I
polish
UGR limit --
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated
Options
Front glass ▪▪ 6 mm one-panel safety glass
panel (lockable according to EN 12150 ▪▪ With installation frame
door) ▪▪ Frameless design ▪▪ With mobile stand
▪▪ Additional housing colors according to RAL
Opening ▪▪ 3 x quick-lock systems

Bushing ▪▪ Cable gland or direct clamping in Quality criteria

junction box
▪▪ 3 m connection cable ▪▪ Photobiological safety (EN 62471): Risk group 0
▪▪ LABS-free
▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection (T5 / T8) 33

UVO
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

1 x 58 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of UVO (UVOptic).

124
This chart shows the light distribution curve
284
of a UVO with 1 x 58 watt.
Exterior and mounting dimensions of the UVO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L206AC002 1 x 36 watt Harting connector system high polish 284 x 1260 x 100 approx. 18.0

L206AC004 1 x 58 watt Harting connector system high polish 284 x 1560 x 100 approx. 16.5

www.surface-controls.de
34

FLO - FlatLightOptic
Narrow-beam optics for tangential illumination

The surface control optic FLO is used for surfaces

with low reflection and is particularly suitable for
surface control in press plants.

Suitable for the following area, especially in the

automotive sector: press plants

0 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 1 x luminescent lamp (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 1 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ Two-part optics and high-polish
parabolic optic Protection class I
▪▪ 1 x head mirror
UGR limit 0
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated Options

Front glass ▪▪ 6 mm one-panel safety glass ▪▪ With installation frame

panel (lockable according to EN 12150 ▪▪ With mobile stand
door) ▪▪ Frameless design ▪▪ Pivotal design version available
▪▪ Additional lamp color temperatures
Opening ▪▪ 3 x quick-lock systems ▪▪ Additional housing colors according to RAL

Bushing ▪▪ Cable gland or direct clamping in Quality criteria

junction box
▪▪ 3 m connection cable ▪▪ Photobiological safety (EN 62471): Risk group 0
▪▪ LABS-free
▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Surface inspection (T5 / T8) 35

FLO
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

1 x 80 watt
100

130
4 x MM8 (internal thread)

1260 / 1560
1000 / 1300
130

Light distribution curve of FLO

124
(FlatLightOptic). This chart shows the light
284
distribution curve of an FLO with 1 x 80 watt.
Exterior and mounting dimensions of the FLO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L209AC001 1 x 80 watt Harting connector system high polish 284 x 1560 x 100 approx. 18.0

L209AC002 1 x 54 watt Harting connector system high polish 284 x 1260 x 100 approx. 16.5

www.surface-controls.de
36
 37

Sunlight simulation

L D L D

LEDSLO LEDLPO LPO

Shows the polishing defects, polishing defects, polishing defects,

following holograms, ultra- holograms holograms
defects and has fine defects
the following
special features

page 38 40 42

Very low reflection level Low reflection level High to very high reflection
(e.g. press plant, body shell) (e.g. KTL, fillers, grinding level
stations, preparation for top coat (e.g. top coat of paint, finish,
of paint) audit)

LEDSLO - LED-SunLightOptic

LEDLPO - LED-LightPointOptic

LPO - LightPointOptic
38

LEDSLO - LED-SunLightOptic
Simulated, bright sunlight

The surface control optic LEDSLO is used for

surfaces with high reflection and can be employed
in all coating processes in the industry. It projects
very focused, multi-point light on a surface (sunlight
simulation). Ultra-fine defects are visible with
LEDSLO.

Suitable for the following areas, especially in the

automotive sector: topcoat preparation, finishing
and audit sites

≤19 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 6 x LED lamps (included) Permitted ambient +5°C to +35°C

(According to the temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
LED controller ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated Protection class I

Front glass ▪▪ 6 mm one-panel safety glass UGR limit ≤19

panel (lockable according to EN 12150 with
door) recessed outlet openings
▪▪ Frameless design Options

Opening ▪▪ 3 x quick-lock systems ▪▪ As an attachment light

▪▪ With mobile stand
Bushing ▪▪ Cable gland or direct clamping in ▪▪ Pivotal design version available
junction box ▪▪ Additional housing colors according to RAL
▪▪ 3 m connection cable

Quality criteria

▪▪ Photobiological safety (EN 62471): Risk group 1

▪▪ LABS-free
▪▪ CE label
 Sunlight simulation 39

LEDSLO
Polishing Holograms Ultra-fine
defects defects

6 x 17 watt
100

130
4 x M8 (Internal thread)

1560
1300
130

Light distribution curve of LEDSLO (LED

124
SunLightOptic). This chart shows the light
284
distribution curve of an LEDSLO with 6 x 17
Exterior and mounting dimensions of the LEDSLO. All data in mm. watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L208AU302 6 x 17 watt Harting connector system yes 284 x 1560 x 100 approx. 20.5

www.surface-controls.de
40

LEDLPO - LED-LightPointOptic
Energy-efficient simulated sunlight

The surface control optic LEDLPO is used for

surfaces with high reflection and can be employed
in all coating processes in the industry. It projects
very focused, multi-point light on a surface (sunlight
simulation). Possible surface defects and holograms
are more visible.

Suitable for the following areas, especially in the

automotive sector: topcoat preparation, finishing and
audit sites

≤16 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 6 x LED lamps (included) Permitted ambient +5°C to +35°C

(According to the temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
LED controller ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ Parabolic optics with aluminum
reflectors Protection class I

Housing ▪▪ Steel sheet UGR limit ≤16

▪▪ RAL7035 powder coated

Front glass ▪▪ 6 mm one-panel safety glass Options

panel (lockable according to EN 12150 with
door) recessed outlet openings ▪▪ As an attachment light
▪▪ Frameless design ▪▪ With mobile stand
▪▪ Pivotal design version available
Opening ▪▪ 3 x quick-lock systems ▪▪ Additional housing colors according to RAL

Bushing ▪▪ Cable gland or direct clamping in

junction box Quality criteria
▪▪ 3 m connection cable
▪▪ Photobiological safety (EN 62471): Risk group 1
▪▪ LABS-free
▪▪ CE label
 Sunlight simulation 41

LEDLPO
Polishing Holograms Ultra-fine
defects defects

6 x 14 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of LEDLPO

124
(LED LightPointOptic). This chart shows the
284
light distribution curve of an LEDLPO with
Exterior and mounting dimensions of the LEDLPO. All data in mm. 6 x 14 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L208AT003 5 x 14 watt Harting connector system yes 284 x 1260 x 100 approx. 21.5

L208AU001 6 x 14 watt Harting connector system yes 284 x 1560 x 100 approx. 23.0

www.surface-controls.de
42

LPO - LightPointOptic
Simulated sunlight for inspection and processing

The surface control optic LPO is used for surfaces

with high reflection and can be employed in all coating
processes in the industry. It projects very focused,
multi-point light on a surface (sunlight simulation).
Possible surface defects and holograms are more
visible.

Suitable for the following areas, especially in the

automotive sector: topcoat preparation, finishing and
audit sites

≤7 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 6 x Halogen lamp (included) Permitted ambient +5°C to +35°C

(According to the temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic
Degree of protection IP54
Optic ▪▪ Parabolic optics with aluminum
reflectors Protection class I

Housing ▪▪ Steel sheet UGR limit ≤7

▪▪ RAL7035 powder coated

Front glass ▪▪ 6 mm one-panel safety glass Options

panel (lockable according to EN 12150 with
door) recessed outlet openings ▪▪ As an attachment light
▪▪ Frameless design ▪▪ With mobile stand
▪▪ Pivotal design version available
Opening ▪▪ 3 x quick-lock systems ▪▪ Additional housing colors according to RAL

Bushing ▪▪ Cable gland or direct clamping in

junction box Quality criteria
▪▪ 3 m connection cable
▪▪ Photobiological safety (EN 62471): Risk group 1
▪▪ LABS-free
▪▪ CE label
 Sunlight simulation 43

LPO
Polishing Holograms Ultra-fine
defects defects

6 x 35 watt
100

130
4 x M8 (Internal thread)

1560
1300
130

Light distribution curve of LPO (LightPoint-

124
Optic). This chart shows the light distribution
284
curve of an LPO with 6 x 35 watt.
Exterior and mounting dimensions of the LPO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L208AC005 6 x 35 watt Harting connector system no 284 x 1560 x 100 approx. 21.5

L208AM009 6 x 65 watt Harting connector system yes 284 x 1560 x 100 approx. 24.5

www.surface-controls.de
44
 45

Color matching

CCO

Features Color matching

Shows the Color differences

following
defects and has
the following
special features

page 46

Very low reflection level Low reflection level High to very high reflection
(e.g. press plant, body shell) (e.g. KTL, fillers, grinding level
stations, preparation for top coat (e.g. top coat of paint, finish,
of paint) audit)

CCO - ColorControlOptic
46

CCO - ColorControlOptic
Standardized light for detecting color variations

The CCO is used for color matching of painted

surfaces. It can be used to simulate virtually all
daylight situations, which enable color various of
different components to become visible. Color control
optic complies with DIN EN 60598-1 / 60598-2-1 and
underwent BAM testing according to DIN 6173.
It is used in color matching booths, especially in the
automotive sector. However, it is also used in color
matching light laboratories, color matching tabletop
booths and individual workstations.

≤16 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 8 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 4 x 2,700 K, 4 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 1 x frequency-neutral diffuser
▪▪ 1 x symmetrical large area reflector Protection class I
▪▪ 1 x prism mixed light optics
▪▪ 2 x specially coated colored re- UGR limit ≤16
flectors for adapting to the neutral
spectrum on the windshield
Options
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Front glass ▪▪ 4 mm one-panel safety glass ▪▪ Additional housing colors according to RAL
panel (lockable according to EN 12150
door) ▪▪ In door frame
Quality criteria
Opening ▪▪ 3 x quick-lock systems
▪▪ Photobiological safety (EN 62471): Risk group 0
Bushing ▪▪ Cable gland or direct clamping in ▪▪ LABS-free
junction box ▪▪ CE label
▪▪ 4 m connection cable ▪▪ ENEC certification
▪▪ EAC certification
 Color matching 47

CCO
Blisters, Dents Pits Scratches Orange peel Paint runs Paint defects Dirt Voids Color defects
bubbles

8 x 58 watt
218

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of CCO (Color-

700

860
ControlOptic). This chart shows the light
distribution curve of a CCO with 8 x 58 watt.
Exterior and mounting dimensions of the CCO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L205AC001-14 8 x 58 watt Cable gland with 860 x 1560 x 218 approx. 60.5

L205AC002-14 8 x 36 watt Cable gland with 860 x 1260 x 218 approx. 57.5

www.surface-controls.de
48
 49

Workplace illumination

L D

ARO PM ARO OCO

Features asymmetric asymmetric homogeneous

lighting with lighting lighting
LED technology

page 50 52 54

Very low reflection level Low reflection level High to very high reflection
(e.g. press plant, body shell) (e.g. KTL, fillers, grinding level
stations, preparation for top coat (e.g. top coat of paint, finish,
of paint) audit)

ARO PM - ARO puremaxLED®

ARO - AsymmetricReflexOptic

OCO - OpalControlOptic
50

ARO - ARO puremaxLED®

Asymmetrical LED light for ample illumination

The ARO PM is used for surfaces with high reflection

and is optimally suited for use in paint booths without
explosion protection requirements.

Particularly in the automotive sector, it is suitable

for: paint booths, topcoat preparation and other
areas...

LABS
FREE

Features Technical specifications

Assembly ▪▪ 3 x LED lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 3 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 3 x asymmetrical reflectors
Protection class I
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated UGR limit --

Front glass ▪▪ 6 mm one-panel safety glass Options

panel (lockable according to EN 12150
door) ▪▪ Frameless design ▪▪ With installation frame
▪▪ With mobile stand
Opening ▪▪ 3 x quick-lock systems ▪▪ Additional lamp color temperatures
▪▪ Additional housing colors according to RAL
Bushing ▪▪ Harting plug system or direct ▪▪ Connection cable in other lengths
clamping in junction box
▪▪ 3 m connection cable Quality criteria

▪▪ Photobiological safety (EN 62471): Risk group 1

▪▪ LABS-free
▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Workplace illumination 51

ARO PM
Asymmetrical Homogenous

1 x 25 watt
65

130
4 x M8 (Internal thread)

1560
1300
130

Light distribution curve of ARO PM

124 / 700

284 / 860
(ARO puremaxLED®). This chart shows the
light distribution curve of an ARO PM with
Exterior and mounting dimensions of the ARO PM. All data in mm. 1 x 25 watt.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L603LD301 3 x 25 watt Harting connector system high polish 860 x 1560 x 65

L603LD321 1 x 25 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.0

www.surface-controls.de
52

ARO - AsymmetricReflexOptic
Asymmetrical light for ample illumination

The ARO is used for surfaces with high reflection

and is optimally suited for use in paint booths
without explosion protection requirements.

Particularly in the automotive sector, it is suitable

for: paint booths, topcoat preparation and other
areas...

LABS
FREE

Features Technical specifications

Assembly ▪▪ 3 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 3 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic ▪▪ 3 x asymmetrical reflectors
▪▪ Reflector chambers separated Protection class I
with regards to light
UGR limit --
Housing ▪▪ Steel sheet
▪▪ RAL7035 powder coated Options

Front glass ▪▪ 6 mm one-panel safety glass ▪▪ With installation frame

panel (lockable according to EN 12150 ▪▪ With mobile stand
door) ▪▪ Frameless design ▪▪ Additional lamp color temperatures
▪▪ Additional housing colors according to RAL
Opening ▪▪ 3 x quick-lock systems ▪▪ Connection cable in other lengths

Bushing ▪▪ Harting plug system or direct Quality criteria

clamping in junction box
▪▪ 3 m connection cable ▪▪ Photobiological safety (EN 62471): Risk group 0
▪▪ LABS-free
▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Workplace illumination 53

ARO
Asymmetrical Homogenous

3 x 58 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of ARO (Asymmetric-

700

860
ReflexOptic). This chart shows the light distri-
bution curve of an ARO with 3 x 58 watt.
Exterior dimensions and mounting dimensions of ARO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L201AC030 3 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.5

L201AC031 3 x 36 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.0

L201AC032 3 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.0

L201AC033 3 x 54 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.5

*Additional design versions on page 77

www.surface-controls.de
54

OCO - OpalControlOptic
Uniform surface illumination

The OCO is used for controlling surfaces with high

reflection and for uniformly illuminating surfaces.

Particularly in the automotive sector, it is suitable

for: topcoat areas and assembly areas as well as
individual workstations and other areas...

≤15 LABS
UGR FREE

Features Technical specifications

Assembly ▪▪ 3 x luminescent lamps (included) Permitted ambient +5°C to +35°C

(According to the ▪▪ 3 x 6,500 K temperature
design version)
Rated voltage 220-240 V, 50/60 Hz
Ballast ▪▪ Electronic, digitally dimmable
Degree of protection IP54
Optic --
Protection class I
Housing ▪▪ Steel sheet
▪▪ RAL9010 powder coated UGR limit ≤15

Front glass ▪▪ Opal glass Options

panel (lockable ▪▪ 6 mm one-panel safety glass
door) according to EN 12150 ▪▪ With installation frame
▪▪ Frameless design ▪▪ With mobile stand
▪▪ Additional lamp color temperatures
Opening ▪▪ 3 x quick-lock systems ▪▪ Additional housing colors according to RAL
▪▪ Connection cable in other lengths
Bushing ▪▪ Cable gland or direct clamping in
junction box Quality criteria
▪▪ 3 m connection cable
▪▪ Photobiological safety (EN 62471): Risk group 0
▪▪ LABS-free
▪▪ CE label
▪▪ ENEC certification
▪▪ EAC certification
 Workplace illumination 55

OCO
Asymmetrical Homogenous

3 x 58 watt
100

130

1260 / 1560
1000 / 1300
4 x M8 (Internal thread)

130

Light distribution curve of OCO (Opal-

124 / 700

284 / 860
ControlOptic). This chart shows the light
distribution curve of an OCO with 3 x 58 watt.
Exterior and mounting dimensions of the OCO. All data in mm.

Order number Lamps Connection system Reflector Dimensions in mm (WxHxD) Weight in kg

L102AC001 3 x 58 watt Harting connector system none 860 x 1560 x 100 approx. 40.0

L102AC003 3 x 36 watt Harting connector system none 860 x 1260 x 100 approx. 33.5

*Additional design versions on page 77

www.surface-controls.de
56

ASTalpha

Features Automatic
controller with
touchscreen

page 58
 57

Controllers and accessories

HASTalpha HAST2.0 HST1.2 HAFSTalpha HAFST2.0 Expansion

module

Semiautomatic Semiautomatic Manual controller Semiautomatic Semiautomatic Expansion

controller with controller color controller color controller module for the
touchscreen with touchscreen ASTalpha for
more fixture
rings

60 62 64 66 68 70
58

ASTalpha - Automatic controller

Fully automatic brightness control of lighting systems

The ASTalpha with touchscreen is the latest generation

of automatic controllers from OLIGO Lichttechnik
GmbH – surface controls. It can be operated directly
via the TFT touchscreen display. Equipped with a
special sensor, surface brightness and band speed
are detected and the lighting is adjusted automatically.

ASTalpha is used in: audit sites, light booths, light

tunnels and other areas

LABS
FREE

Features Technical specifications

Display ▪▪ 10.1“ VGA TFT display Permitted ambient +5°C to +35°C

▪▪ With fully integrated touchscreen temperature

Interfaces ▪▪ 1 x Powerlink Supply voltage ▪▪ Controller: 24 V DC

▪▪ 1 x Ethernet 10/100 Mbit/s ▪▪ Junction box: 100-240 V AC
▪▪ 2 x X2X Link Master
▪▪ 2 x USB 2.0 Power consumption 20 watt

Outputs ▪▪ 24 DSI outputs Frequency 50-60 Hz

(expandable to max. 72)
▪▪ Control up to 840 surface Degree of protection ▪▪ Controller: IP54
control optics ▪▪ Junction box: IP54

Protection class I

Special information Quality criteria

▪▪ Fully automatic adjustment of the lighting intensity ▪▪ LABS-free

▪▪ Easy and convenient to operate ▪▪ CE label
▪▪ Minimal wiring ▪▪ EAC certification
▪▪ Selection of various menu languages ▪▪ Protected against shortcircuits and overload
▪▪ Automatic error code and error display
 Controllers and accessories 59

R
LO R
CO LO
CO

MANUAL + ASTalpha
FULLY SEMI SEMI SEMI SEMI
ASTalpha HASTalpha HAST2.0 HST1.2 HAFSTalpha HAST2.0 Accessories

System components

▪▪ Automatic controller
75.0

▪▪ Junction box of the controller

▪▪ Brightness attachment
▪▪ Junction box for the brightness
attachement
▪▪ Ultrasound sensor
318.5

Optional accessory

▪▪ Expansion module

382.5

Exterior and mounting dimensions ASTalpha. All data in mm.

Dimensions in mm Weight
Order number System components Housing material
(WxHxD) in kg
M307AS001AZ-EN Automatic controller with touch- 382.5 x 318.5 x 75.0 Stainless steel approx. 5.9
screen and analog band signal

incl. junction box of the controller 400 x 400 x 120 Steel sheet, RAL7035 powder coated approx. 8.5

incl. brightness attachment 300 x 150 x 80 Steel sheet, RAL7035 powder coated approx. 3.6

incl. junction box of the brightness 400 x 200 x 120 Steel sheet, RAL7035 powder coated approx. 3.6
attachment

incl. ultrasound sensor 80 x 80 x 34 Acrylonitrile butadiene styrene (ABS) approx. 0.2

www.surface-controls.de
60

HASTalpha - Semiautomatic controller

Semiautomatic brightness control of lighting systems

The HASTalpha with touchscreen is the latest

generation of semiautomatic controllers from
OLIGO Lichttechnik GmbH – surface controls. It
can be operated directly via the TFT touchscreen
display. With the touch of a finger, individual light
groups in lighting systems can be created and light
scenarios custom programmed.

HASTalpha is used in: audit sites, light booths, light

tunnels, individual workstations and other areas...

LABS
FREE

Features Technical specifications

Display ▪▪ 10.1“ VGA TFT display Permitted ambient +5°C to +35°C

▪▪ With fully integrated touchscreen temperature

Interfaces ▪▪ 1 x Powerlink Supply voltage ▪▪ Controller: 24 V DC

▪▪ 1 x Ethernet 10/100 Mbit/s ▪▪ Junction box: 100-240 V AC
▪▪ 2 x X2X Link Master
▪▪ 2 x USB 2.0 Power consumption 20 watt

Outputs ▪▪ 24 DSI outputs Frequency 50-60 Hz

(70 elec. ballasts per channel)
▪▪ Control up to 840 surface Degree of protection ▪▪ Controller: IP54
control optics ▪▪ Junction box: IP54

Protection class I

Special information Quality criteria

▪▪ Easy and convenient to operate ▪▪ LABS-free

▪▪ Minimal wiring ▪▪ CE label
▪▪ Selection of various menu languages ▪▪ EAC certification
▪▪ Automatic error code and error display ▪▪ Protected against shortcircuits and overload
 Controllers and accessories 61

R
LO R
CO LO
CO

MANUAL + HASTalpha
FULLY SEMI SEMI SEMI SEMI
ASTalpha HASTalpha HAST2.0 HST1.2 HAFSTalpha HAST2.0 Accessories

System components

▪▪ Semiautomatic controller
75.0

▪▪ Junction box of the controller

318.5

382.5

Exterior and mounting dimensions of the HASTalpha. All data in mm.

Dimensions in mm Weight
Order number System components Housing material
(WxHxD) in kg
M307HA001AZ-EN Semiautomatic controller with 382.5 x 318.5 x 75.0 Stainless steel approx. 5.9
touchscreen

incl. junction box of the controller 400 x 400 x 120 Steel sheet, RAL7035 powder coated approx. 8.5

www.surface-controls.de
62

HAST2.0 - Semiautomatic controller

Simple programming of light groups and light scenarios

OLIGO surface control optics can be controlled using

the semiautomatic controller HAST2.0. It enables
the coordination of light scenarios and programmed
light groups. The controller features function keys
that can be specially assigned as well as a four-line,
alphanumeric display for viewing status information
(performance, energy, operating hours).
HAST2.0 is used in: audit sites, light booths, light
tunnels, individual workstations and other areas...

LABS
FREE

Features Technical specifications

Display ▪▪ 4-line alphanumeric display Permitted ambient +5°C to +35°C

▪▪ 4 x 20 character LC display temperature

Interfaces ▪▪ 1 x RS232 Supply voltage ▪▪ Controller: 15 V DC

▪▪ Junction box: 100-240 V AC
Outputs ▪▪ 14 DSI outputs
(70 elec. ballasts per channel) Power consumption 10 watt
▪▪ Control up to 490 surface
control optics Frequency 50-60 Hz

Inputs ▪▪ 4 digital inputs (Umax = 24 V) Degree of protection IP54

▪▪ 6 analog inputs
Protection class I

Special information Quality criteria

▪▪ Easy and convenient to operate ▪▪ LABS-free

▪▪ Minimal wiring ▪▪ CE label
▪▪ Easy connection to remote control modules ▪▪ EAC certification
▪▪ System expansion possible with system bus ▪▪ Protected against shortcircuits and overload
module
▪▪ Selection of various menu languages: DE, EN, FR
 Controllers and accessories 63

R
LO R
CO LO
CO

MANUAL + HAST2.0
FULLY SEMI SEMI SEMI SEMI
ASTalpha HASTalpha HAST2.0 HST1.2 HAFSTalpha HAST2.0 Accessories

© AGCO Fendt
System components

▪▪ Semiautomatic controller
107

▪▪ Junction box of the controller

Optional accessory

▪▪ Radio remote control

221

221

229

Exterior and mounting dimensions of the HAST2.0. All data in mm.

Dimensions in mm Weight in
Order number System components Housing material
(WxHxD) kg
M301HA001AZ-EN Semiautomatic controller 229 x 221 x 107 Plastic approx. 1.0

incl. junction box of the controller 300 x 200 x 120 Steel sheet, RAL7035 powder coated approx. 3.6

www.surface-controls.de
64

HST1.2 - Manual controller

Intuitive, manual dimming

The hand controller HST1.2 is used to manually

control OLIGO surface control optics. All common
surface control optics can be controlled via a dial
with a large, clearly legible scale.

HST1.2 is used in: short line areas, audit sites,

light booths, light tunnels, individual workstations,
moveable stands and other areas...

LABS
FREE

Features Technical specifications

Display ▪▪ Scale 0 - 100% Permitted ambient +5°C to +35°C

temperature
Interfaces --
Supply voltage 85-264 V AC
Outputs ▪▪ 4 DSI outputs
(70 elec. ballasts per channel) Power consumption 5 watt
▪▪ Control up to 140 surface
control optics Frequency 50-60 Hz

Inputs -- Degree of protection IP54

Protection class I

Special information Quality criteria

▪▪ Easy and convenient to operate ▪▪ LABS-free

▪▪ Minimal wiring ▪▪ CE label
▪▪ EAC certification
▪▪ Protected against short-circuits
 Controllers and accessories 65

R
LO R
CO LO
CO

MANUAL + HST1.2
FULLY SEMI SEMI SEMI SEMI
ASTalpha HASTalpha HAST2.0 HST1.2 HAFSTalpha HAST2.0 Accessories

System components
80

▪▪ Manual controller
300

150

Exterior and mounting dimensions of the HST1.2. All data in mm.

Dimensions in mm Weight in
Order number System components Housing material
(WxHxD) kg
M301HD001AZ Manual controller, DSI 150 x 300 x 80 Steel sheet, RAL7035 powder coated approx. 2.4

www.surface-controls.de
66

HAFSTalpha - Semiautomatic color controller

Control individual light groups via a touchscreen

The HAFSTalpha is the latest generation of

semiautomatic color controllers from OLIGO
Lichttechnik GmbH – surface controls. Light scenarios
and light groups can be quickly and conveniently
programmed via a TFT touchscreen display. A
large overview display of the color matching booth
visualizes the settings made.

The HAFSTalpha iis used in: color matching booths,

color matching tabletop booths, color matching light
laboratories

LABS
FREE

Features Technical specifications

Display ▪▪ 15.6“ Full-HD TFT display Permitted ambient +5°C to +35°C

▪▪ With fully integrated touchscreen temperature

Interfaces ▪▪ 2 x Ethernet 10/100/1000 Supply voltage ▪▪ Controller: 24 V DC

▪▪ Junction box: 100-240 V AC
Outputs ▪▪ 24 DSI outputs
▪▪ Control of up to 420 color Power consumption 50 watt
control optics
Frequency 50-60 Hz
Inputs --
Degree of protection ▪▪ Controller: IP65
▪▪ Junction box: IP54

Protection class I

Special information Quality criteria

▪▪ Easy and convenient to operate ▪▪ LABS-free

▪▪ Minimal wiring ▪▪ CE label
▪▪ Selection of various menu languages ▪▪ EAC certification
▪▪ Protected against shortcircuits and overload
 Controllers and accessories 67

R
LO R
CO LO
CO

MANUAL + HAFSTalpha
FULLY SEMI SEMI SEMI SEMI
ASTalpha HASTalpha HAST2.0 HST1.2 HAFSTalpha HAST2.0 Accessories

System components

▪▪ Semiautomatic color controller

125

▪▪ Junction box of the controller

▪▪ Support arm system

Optional accessory
269

309

▪▪ Radio remote control

75
432

Exterior and mounting dimensions of the HAFSTalpha. All data in mm.

Dimensions in mm Weight in
Order number System components Housing material
(WxHxD) kg
M308HA001AZ-EN Semiautomatic color controller 432 x 309 x 125 Aluminum, Painting: white aluminum approx. 5.3
with touchscreen (similar to RAL9006)

incl. junction box of the controller 400 x 400 x 120 Steel sheet, RAL7035 powder coated approx. 8.5

incl. support arm system

www.surface-controls.de
68

HAFST2.0 - Semiautomatic color controller

Control light groups with different light colors

The semiautomatic color controller HAFST2.0 can

be used to manually control programmed light
scenarios with different color temperatures. Light
scenarios can be programmed or retrieved on site
with the help of the semiautomatic color controller.

The HAFST2.0 is used in: color matching booths,

color matching tabletop booths, color matching
light laboratories, short line areas with MultiRefle-
xOptics

LABS
FREE

Features Technical specifications

Display ▪▪ 4-line alphanumeric display Permitted ambient +5°C to +35°C

▪▪ 4 x 20 character LC display temperature

Interfaces ▪▪ 1 x RS232 Supply voltage ▪▪ Controller: 15 V DC

▪▪ Junction box: 100-240 V AC
Outputs ▪▪ 14 DSI outputs
▪▪ 2 digital outputs (low side) Power consumption 10 watt
▪▪ Control of up to 245 color
control optics Frequency 50-60 Hz

Inputs ▪▪ 4 digital inputs (Umax = 24 V) Degree of protection IP54

Protection class I

Quality criteria
Special information
▪▪ LABS-free
▪▪ Easy and convenient to operate ▪▪ CE label
▪▪ Minimal wiring ▪▪ EAC certification
▪▪ Easy connection to remote control modules ▪▪ Protected against shortcircuits and overload
▪▪ Setting fixed color temperatures according to DIN
6173 part 2 possible
▪▪ Selection of various menu languages: DE, EN, FR
 Controllers and accessories 69

R
LO R
CO LO
CO

MANUAL + HAFST2.0
FULLY SEMI SEMI SEMI SEMI
ASTalpha HASTalpha HAST2.0 HST1.2 HAFSTalpha HAST2.0 Accessories

System components

▪▪ Semiautomatic color controller

107

▪▪ Junction box of the controller

Optional accessory

▪▪ Radio remote control

221

221

229

Exterior and mounting dimensions of the HAFST2.0. All data in mm.

Dimensions in mm Weight in
Order number System components Housing material
(WxHxD) kg
M302HA001AZ-EN Semiautomatic color controller 229 x 221 x 107 Plastic approx. 1.0

incl. junction box of the controller 300 x 200 x 120 Steel sheet, RAL7035 powder coated approx. 3.6

www.surface-controls.de
70

Expansion module
More fixture rings, more control

The expansion module is available as an accessory

for the automatic controller ASTalpha. It can be
used to control up to 24 additional fixture rings.
However, a maximum of 2 expansion modules can
be installed per controller (72 fixture rings).

The expansion module is used in: light tunnels

LABS
FREE

Features Technical specifications

Outputs ▪▪ 24 DSI outputs Permitted ambient +5°C to +35°C

(70 elec. ballasts per channel) temperature
▪▪ Control up to 840 surface
control optics Supply voltage 220-240 V AC

Inputs -- Power consumption 10 watt

Frequency 50-60 Hz
Special information
Degree of protection IP54
▪▪ Minimal wiring
Protection class I

Quality criteria

▪▪ LABS-free
▪▪ CE label
▪▪ Protected against short-circuits
 Controllers and accessories 71

R
LO
Expansion
R
CO LO
CO

FULLY SEMI SEMI MANUAL SEMI SEMI + module

ASTalpha HASTalpha HAST2.0 HST1.2 HAFSTalpha HAST2.0 Accessories

120

400

360
400
360

Exterior and mounting dimensions of the expansion module. All data in mm.

Dimensions in mm Weight in
Order number System components Housing material
(WxHxD) kg
M304AS024AZ Expansion module 400 x 400 x 120 Steel sheet, RAL7035 powder coated approx. 8.5

www.surface-controls.de
72
 73

Design versions

Mobile surface control�������������������������������������������� 74

74

Mobile surface control

Rollable, height adjustable, rotatable (according to the design version)

Features

▪▪ Optionally as a steel construction or aluminum

construction
▪▪ Mobility thanks to rubberized steering rollers
▪▪ Various design versions and combination options
(more upon request)

According to the design version:

▪▪ Rotatable
▪▪ Pivotal
▪▪ Height adjustable
▪▪ Cable reel and push handles (optional)

A ▪▪ Mobile stand on steering rollers for

2 surface control optics, rotatable

B ▪▪ Mobile stand on steering rollers for

3 surface control optics, pivotal

C ▪▪ Mobile stand on steering rollers for

6 surface control optics A

1 2 3
 Design versions - Mobile surface control 75

B C

Mobile color matching

1 ▪▪ Mobile stand on steering rollers for 2 color

control optics
▪▪ Upper color control optic inclined
▪▪ Cable reel and push handles (optional)

2 ▪▪ Mobile stand on steering rollers for 1 color

control optic, rotatable, height adjustable
▪▪ Cable reel (optional)

3 ▪▪ Mobile stand on rollers for 4 color control optics

▪▪ 5 steering rollers, rubberized roller tread
(2 with double stop)
▪▪ Cable reel (optional)

▪▪ Mobile stand on steering rollers for 2 color

4 control optics and 1 x sunlight simulation
▪▪ Cable reel and push handles (optional)
4
76
 77

Order number catalog

LPS50 PM - LPS50 puremaxLED®������������������������� 78

LPS100 PM - LPS100 puremaxLED®��������������������� 78
VAO PM - VAO puremaxLED®�������������������������������� 78
WLO PM - WLO puremaxLED®������������������������������ 79
LPS50 - LensPrismDarkfieldOptic�������������������������� 80
LPS100 - LensPrismDarkfieldOptic������������������������ 80
VAO - Vario optic���������������������������������������������������� 81
WLO - SwitchLineOptic������������������������������������������ 82
MRO - MultiReflexOptic������������������������������������������ 82
LLO - LackLusterOptic������������������������������������������� 82
UVO - UVOptic������������������������������������������������������� 82
FLO - FlatLightOptic����������������������������������������������� 83
LEDSLO - LED-SunLightOptic������������������������������� 84
LEDLPO - LED-LightPointOptic����������������������������� 84
LPO - LightPointOptic��������������������������������������������� 84
ARO PM - ARO puremaxLED®������������������������������� 85
ARO - AsymmetricReflexOptic������������������������������� 85
OCO - OpalControlOptic���������������������������������������� 85
CCO - ColorControlOptic���������������������������������������� 86
ASTalpha - Automatic controller������������������������������� 87
HASTalpha - Semiautomatic controller�������������������� 87
HAST2.0 - Semiautomatic controller���������������������� 87
HST1.2 - Manual controller������������������������������������ 87
HAFSTalpha - Semiautomatic color controller��������� 88
HAFST2.0 - Semiautomatic color controller����������� 88
Expansion module�������������������������������������������������� 88
78 Order number catalog - Surface inspection with LED technology

LPS50 PM - LPS50 puremaxLED®

BRILLIANT AND ENERGY EFFICIENT

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L601LD354 4 x 12 watt Harting connector system high polish 930 x 705 x 65 approx. 20.0 with installation frame

L601LD401 4 x 25 watt Harting connector system high polish 860 x 1560 x 65 approx. 50.5

L601LD402 4 x 40 watt Harting connector system high polish 860 x 1560 x 65 approx. 52.0

L601LD403 4 x 20 watt Harting connector system high polish 860 x 1260 x 65 approx. 40.5

L601LD404 4 x 32 watt Harting connector system high polish 860 x 1260 x 65 approx. 41.5

L601LD472 4 x 40 watt Harting connector system high polish 930 x 1615 x 65 with installation frame

LPS100 PM - LPS100 puremaxLED®

BRILLIANT AND ENERGY EFFICIENT

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L601LD301 3 x 25 watt Harting connector system high polish 860 x 1560 x 65 approx. 46.0

L601LD302 3 x 40 watt Harting connector system high polish 860 x 1560 x 65 approx. 47.5

L601LD303 3 x 20 watt Harting connector system high polish 860 x 1260 x 65 approx. 39.0

L601LD304 3 x 32 watt Harting connector system high polish 860 x 1260 x 65 approx. 40.0

L601LD305 3 x 10 watt Harting connector system high polish 860 x 650 x 65 approx. 22.0

L601LD351 3 x 25 watt Harting connector system high polish 860 x 1560 x 65 approx. 46.5 5 m connection cable

L601LD371 3 x 25 watt Harting connector system high polish 930 x 1615 x 65 approx. 52.0 with installation frame

VAO PM - VAO puremaxLED®

ENERGY EFFICIENCY with slimline design

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L601LD321 1 x 25 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.0

L601LD322 1 x 40 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.0

L601LD323 1 x 20 watt Harting connector system high polish 284 x 1260 x 65 approx. 15.5

L601LD324 1 x 32 watt Harting connector system high polish 284 x 1260 x 65 approx. 15.5

L601LD335 1 x 25 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.5 pivotal

L601LD336 1 x 40 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.5 pivotal

L601LD337 1 x 32 watt Harting connector system high polish 284 x 1260 x 65 approx. 16.0 pivotal

L601LD352 1 x 25 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.5 5 m connection cable
 Order number catalog - Surface inspection with LED technology 79

WLO PM - WLO puremaxLED®

Energy efficient light with enhanced contrast

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L602LD335 1 x 25 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.5 pivotal

L602LD401 4 x 25 watt Harting connector system high polish 860 x 1560 x 65 approx. 50.0

L602LD402 4 x 40 watt Harting connector system high polish 860 x 1560 x 65 approx. 52.0

L602LD403 4 x 20 watt Harting connector system high polish 860 x 1260 x 65 approx. 40.5

L602LD404 4 x 32 watt Harting connector system high polish 860 x 1260 x 65 approx. 41.5
80 Order number catalog - Surface inspection (T5 / T8)

LPS50 - LensPrismDarkfieldOptic
Quick, reliable and consistent defect detection

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L201AE001 4 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 45.5

L201AE002 4 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

L201AE003 4 x 36 watt Harting connector system white 860 x 1260 x 100 approx. 38.0

L201AE004 4 x 36 watt Harting connector system high polish 860 x 1260 x 100 approx. 38.0

L201AE005 4 x 80 watt Harting connector system white 860 x 1560 x 100 approx. 45.5

L201AE006 4 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

L201AE007 4 x 54 watt Harting connector system white 860 x 1260 x 100 approx. 38.5

L201AE008 4 x 54 watt Harting connector system high polish 860 x 1260 x 100 approx. 38.5

L201AE021 4 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 45.5

L201AE145 4 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 46.0 10 m connection cable

L201AE301 4 x 35 watt Harting connector system white 860 x 1560 x 100 approx. 45.5

L201AE308 4 x 14 watt Harting connector system high polish 860 x 650 x 100 approx. 22.0

LPS100 - LensPrismDarkfieldOptic
Quick, reliable and consistent defect detection

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L201AC001 3 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 44.0

L201AC002 3 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.0

L201AC003 3 x 36 watt Harting connector system white 860 x 1260 x 100 approx. 37.0

L201AC004 3 x 36 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.0

L201AC005 3 x 80 watt Harting connector system white 860 x 1560 x 100 approx. 44.5

L201AC006 3 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.5

L201AC008 3 x 54 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.5

L201AC020 3 x 18 watt Harting connector system white 860 x 650 x 100 approx. 21.0

L201AC101 3 x 58 watt Harting connector system white 930 x 1615 x 100 approx. 50.0 with installation frame

L201AC103 3 x 36 watt Harting connector system white 930 x 1315 x 100 approx. 42.0 with installation frame

L201AC105 3 x 80 watt Harting connector system white 930 x 1615 x 100 approx. 50.5 with installation frame

L201AC106 3 x 58 watt Harting connector system white 930 x 1615 x 100 approx. 50.5 with installation frame,
6 m connection cable

L201AC120 3 x 18 watt Harting connector system white 930 x 705 x 100 approx. 25.0 with installation frame

L201AC140 3 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.0 5 m connection cable
 Order number catalog - Surface inspection (T5 / T8) 81

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L201AC141 3 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 44.5 6 m connection cable

L201AC142 3 x 58 watt Harting connector system white 860 x 1560 x 100 approx. 44.5 7 m connection cable

L201AC143 3 x 36 watt Harting connector system white 860 x 1260 x 100 approx. 37.5 7 m connection cable

L201AC301 3 x 35 watt Harting connector system white 860 x 1560 x 100 approx. 44.5

L201AC302 3 x 35 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.5

L201AC303 3 x 28 watt Harting connector system white 860 x 1260 x 100 approx. 37.5

L201AC304 3 x 28 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.5

L201AC305 3 x 25 watt Harting connector system white 860 x 1260 x 100 approx. 37.5

L201AC306 3 x 25 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.5

L201AC307 3 x 14 watt Harting connector system white 860 x 650 x 100 approx. 21.5

L201AC308 3 x 14 watt Harting connector system high polish 860 x 650 x 100 approx. 21.5

L201AC311 3 x 35 watt Harting connector system white 860 x 1560 x 100 approx. 44.5 non-dimmable

L201AC401 3 x 49 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.5

L201AC405 3 x 49 watt Harting connector system white 860 x 1560 x 100 approx. 44.5 non-dimmable

VAO - VarioOptic
Reliable defect detection in slimline design

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L201AK001 2 x 58 watt Harting connector system white 284 x 1560 x 100 approx. 18.5

L201AK002 2 x 58 watt Harting connector system high polish 284 x 1560 x 100

L201AK003 2 x 36 watt Harting connector system white 284 x 1260 x 100 approx. 17.0

L201AK004 2 x 36 watt Harting connector system high polish 284 x 1260 x 100 approx. 17.0

L201AK005 2 x 80 watt Harting connector system high polish 284 x 1560 x 100 approx. 18.5

L201AK006 2 x 54 watt Harting connector system high polish 284 x 1260 x 100 approx. 17.0

L201AK024 2 x 58 watt Harting connector system white 284 x 1560 x 100 approx. 18.5 pivotal

L201AK103 2 x 36 watt Harting connector system white 284 x 1260 x 100 approx. 20.5 with installation frame

L201AM001 1 x 58 watt Harting connector system white 284 x 1560 x 100 approx. 18.0

L201AM003 1 x 36 watt Harting connector system white 284 x 1260 x 100 approx. 16.5

L201AM006 1 x 80 watt Harting connector system high polish 284 x 1560 x 100 approx. 18.0

L201AM007 1 x 54 watt Harting connector system white 284 x 1260 x 100 approx. 17.0

L201AM008 1 x 54 watt Harting connector system high polish 284 x 1260 x 100 approx. 17.0
82 Order number catalog - Surface inspection (T5 / T8)

WLO - SwitchLineOptic
Light dependent on viewing angle with enhanced contrast

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L202AC001 4 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

L202AC003 4 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.5

L202AC004 4 x 54 watt Harting connector system high polish 860 x 1260 x 100 approx. 38.5

MRO - MultiReflexOptic
Surface control with simultaneous color evaluation

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L203AC001-14 4 x 58 watt Cable gland high polish 860 x 1560 x 218 approx. 56.0

LLO - LackLusterOptic
High-polish surfaces appear matt

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L207AC003-14 2 x 58 watt Harting connector system white 860 x 1560 x 218 approx. 54.0

L207AC004-14 2 x 36 watt Harting connector system white 860 x 1260 x 218 approx. 46.5

UVO - UVOptic
Florescence optics for effect paints, textiles and plastics

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L206AC002 1 x 36 watt Harting connector system high polish 284 x 1260 x 100 approx. 18.0

L206AC004 1 x 58 watt Harting connector system high polish 284 x 1560 x 100 approx. 16.5
 Order number catalog - Surface inspection (T5 / T8) 83

FLO - FlatLightOptic
Narrow-beam optics for tangential illumination

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L209AC001 1 x 80 watt Harting connector system high polish 284 x 1560 x 100 approx. 17.5

L209AC002 1 x 54 watt Harting connector system high polish 284 x 1260 x 100 approx. 16.5
84 Order number catalog - Sunlight simulation

LEDSLO - LED-SunLightOptic
Simulated, bright sunlight

Order number Lamps Connection system Dimmable Dimensions Weight Special information
in mm (WxHxD) in kg
L208AU302 6 x 17 watt Harting connector system yes 284 x 1560 x 100 approx. 20.5

LEDLPO - LED-LightPointOptic
Energy-efficient simulated sunlight

Order number Lamps Connection system Dimmable Dimensions Weight Special information
in mm (WxHxD) in kg
L208AT003 5 x 14 watt Harting connector system yes 284 x 1260 x 100 approx. 21.5

L208AU001 6 x 14 watt Harting connector system yes 284 x 1560 x 100

LPO - LightPointOptic
Simulated sunlight for inspection and processing

Order number Lamps Connection system Dimmable Dimensions Weight Special information
in mm (WxHxD) in kg
L208AC004 6 x 35 watt Harting connector system yes 284 x 1560 x 100

L208AC005 6 x 35 watt Harting connector system no 284 x 1560 x 100 approx. 21.5 with back lighting

L208AM009 6 x 65 watt Harting connector system yes 284 x 1560 x 100 approx. 24.5

L208AT003 5 x 14 watt Harting connector system yes 284 x 1260 x 100 approx. 21.5
 Order number catalog - Workplace illumination 85

ARO PM - ARO puremaxLED®

Asymmetrical LED light for ample illumination

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L603LD301 3 x 30 watt Harting connector system high polish 860 x 1560 x 65

L603LD321 1 x 25 watt Harting connector system high polish 284 x 1560 x 65 approx. 18.0

ARO - AsymmetricReflexOptic
Asymmetrical light for ample illumination

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L201AC030 3 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 44.5

L201AC031 3 x 36 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.0

L201AC032 3 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 45.0

L201AC033 3 x 54 watt Harting connector system high polish 860 x 1260 x 100 approx. 37.5

L201AC040 3 x 58 watt Harting connector system high polish 860 x 1560 x 100 approx. 24.5 without pane

L201AC041 3 x 36 watt Harting connector system high polish 860 x 1260 x 100 approx. 21.0 without pane

L201AC042 3 x 80 watt Harting connector system high polish 860 x 1560 x 100 approx. 25.0 without pane

L201AC043 3 x 54 watt Harting connector system high polish 860 x 1260 x 100 approx. 21.5 without pane

L201AC130 3 x 58 watt Harting connector system high polish 930 x 1615 x 100 approx. 50.5 with installation frame

OCO - OpalControlOptic
Uniform surface illumination

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L102AC001 3 x 58 watt Harting connector system none 860 x 1560 x 100 approx. 40.0

L102AC003 3 x 36 watt Harting connector system none 860 x 1260 x 100 approx. 33.5

L102AE011 4 x 58 watt Harting connector system none 860 x 1560 x 100 approx. 40.0

L102AK001 2 x 58 watt Harting connector system none 284 x 1560 x 100 approx. 16.5

L102AK002 2 x 58 watt Harting connector system white 284 x 1560 x 100 approx. 18.5 with lens prism pane

L102AK004 2 x 54 watt Harting connector system high polish 284 x 1260 x 100 approx. 17.0

L102AK005 2 x 80 watt Harting connector system high polish 284 x 1560 x 100 approx. 18.5
86 Order number catalog - Color matching

CCO - ColorControlOptic
Standardized light for detecting color variations

Order number Lamps Connection system Reflector Dimensions Weight Special information
in mm (WxHxD) in kg
L205AC001-14 8 x 58 watt Cable gland with 860 x 1560 x 218 approx. 60.5

L205AC002-14 8 x 36 watt Cable gland with 860 x 1260 x 218 approx. 57.5
 Order number catalog - Controllers and accessories 87

ASTalpha - Automatic controller

Fully automatic brightness control of lighting systems

Dimensions in mm Weight
Order number System components Housing material
(WxHxD) in kg
M307AS001AZ-EN Automatic controller with touchscreen and 328.5 x 318.5 x 75 approx. 5.9
analog band signal

incl. junction box of the controller 400 x 400 x 120 Steel sheet, RAL7035 powder coated approx. 8.5

incl. brightness attachment 300 x 150 x 80 Steel sheet, RAL7035 powder coated approx. 3.6

incl. junction box of the brightness attachment 400 x 200 x 120 Steel sheet, RAL7035 powder coated approx. 3.6

incl. ultrasound sensor 80 x 80 x 34 Acrylonitrile butadiene styrene (ABS) approx. 0.2

HASTalpha - Semiautomatic controller

Semiautomatic brightness control of lighting systems

Dimensions in Weight
Order number System components Housing material
mm (WxHxD) in kg
M307HA001AZ-EN Semiautomatic controller with touchscreen 328.5 x 318.5 x 75 approx. 5.9

incl. junction box of the controller 400 x 100 x 120 Steel sheet, RAL7035 powder coated approx. 8.5

HAST2.0 - Semiautomatic controller

Simple programming of light groups and light scenarios

Dimensions in Weight
Order number System components Housing material
mm (WxHxD) in kg
M301HA001AZ-EN Semiautomatic controller 229 x 221 x 107 Plastic approx. 1.0

incl. junction box of the controller 300 x 200 x 120 Steel sheet, RAL7035 powder coated approx. 3.6

HST1.2 - Manual controller

Intuitive, manual dimming

Dimensions in Weight
Order number System components Housing material
mm (WxHxD) in kg
M301HD001AZ Manual controller DSI 150 x 300 x 80 Steel sheet, RAL7035 powder coated approx. 2.4
88 Order number catalog - Controllers and accessories

HAFSTalpha - Semiautomatic color controller

Control individual light groups via a touchscreen

Dimensions in Weight
Order number System components Housing material
mm (WxHxD) in kg
M308HA001AZ-EN Semiautomatic color controller with touch- 432 x 309 x 125 Aluminum, finish: white aluminum approx. 5.3
screen (similar to RAL9006)

incl. junction box of the controller 400 x 400 x 120 Steel sheet, RAL7035 powder coated approx. 8.5

incl. support arm system

HAFST2.0 - Semiautomatic color controller

Control light groups with different light colors

Dimensions in Weight
Order number System components Housing material
mm (WxHxD) in kg
M301HA001AZ-EN Semiautomatic color controller 229 x 221 x 107 Plastic approx. 1.0

incl. junction box of the controller 300 x 200 x 120 Steel sheet, RAL7035 powder coated approx. 3.6

Expansion module
More fixture rings, more control

Dimensions in Weight
Order number System components Housing material
mm (WxHxD) in kg
M304AS024AZ Expansion module 400 x 400 x 120 Steel sheet, RAL7035 powder coated approx. 8.5
 89

References

National (abstract)�������������������������������������������� 90
International (abstract)������������������������������������� 92
90 References - National

National (abstract)

Adam Opel AG Rüsselsheim color matching

AGCO Fendt GmbH Marktoberdorf, Asbach-Bäumenheim audit
AKT altmärker Kunststoff-Technik Gardelegen surface inspection, surface audit
GmbH
AUDI AG Ingolstadt, Neckarsulm body shell, top coat of paint, audit
site, audit, color matching
BauschLinnemann GmbH Sassenberg surface inspection
Bayer MaterialScience AG Leverkusen control site
Biacchessi GmbH & Co. KG Solingen control site
BMW AG Dingolfing, Krauthausen, Leipzig, press plant, body shell, quality con-
Landshut, München, Regensburg, trol, surface audit, top coat of paint,
Berlin hologram error control, Audit site,
control sites
Borbet GmbH Hallenberg-Hesborn control site
Borbet Thüringen GmbH Bad Langensalza surface control site
BSH Bosch und Siemens Hausgeräte Traunreut surface audit
GmbH
Daimler AG Düsseldorf, Bremen control sites, press plant
Decoma (Germany) GmbH Sulzbach control site
Decoma Exterior Systems GmbH Obertshausen, Regenstauf, audit, control site
Leipzig
Decoma GmbH Hannover audit
Dr. Ing. h.c.F. Porsche AG Ludwigsburg, Stuttgart audit, color matching, body shell audit,
topcoat lines
Ed. Heckewerth Nachf. GmbH & Co. KG Hiddenhausen control site
EGGER Holzwerkstoffe Brilon GmbH Brilon control site
& Co. KG
EGGER Kunststoffe GmbH & Co. KG Gifhorn control site
Ford-Werke GmbH Köln, Saarloius top coat of paint, body shell,
surface audit, primer
GARANT Türen und Zargen GmbH Amt Wachsenburg control site
Gestamp Umformtechnik GmbH Bielefeld, Erfurt control site, press plant
Hansa Metallwerke GmbH Burglengenfeld audit site
Hörmann KG Ichtershausen control sites
K.face GmbH Heiligengrabe audit sites, online color measurement,
color matching
Magna Exterior & Interior Sailauf surface audit
Magna Mirrors GmbH & Co. KG Dorfprozelten control sites
Magna Spiegelsysteme GmbH Assamstadt control sites
 References - National 91

National (abstract)

MAN Truck & Bus AG München mobile control site

Merck KgaA Germsheim color matching lighting laboratory
Meredes Benz Ludwigsfelde GmbH Ludwigsfelde body shell, finish, color matching
Miele & Cie. KG Warendorf, Oelde control site, color matching table cabin
Opel Eisenach GmbH Eisenach control sites
Otto Fuchs GmbH Meinerzhagen audit sites, control site
Plastic Omnium Auto Components Großenlupitz audit
GmbH
Polytec Composites Germany GmbH Kraichtal-Gochsheim control site
& Co. KG
REHAU AG & Co. KG Rehau audit site, control sites
SMP Deutschland GmbH Bötzingen, Oldenburg, Schierling topcoat line, control sites, mobile
control site
SWISS KRONO TEX GmbH & Co. KG Heiligengrabe laminate inspection, surface audit
ThyssenKrupp Rasselstein GmbH Rasselstein control site
ThyssenKrupp Stahl AG Neuwied press plant
ThyssenKrupp Steel Europe AG Bochum control site
Tower Automotive Press plant Artern Artern press plant, audit
GmbH
Venjakob Gütersloh audit site
Visomax Coating GmbH Waldbüttelbrunn control sites
voestalpine Polynorm GmbH & Co. KG Schwäbisch Gmünd control site
voestalpine Stamptec Schmölln GmbH Schmölln control site
Volkswagen AG Emden, Hannover, Wolfsburg, top coat of paint, finish, audit, Body
Hannover, Zwickau, Dresden shell, color matching, automatic
surface inspection, audit site, filler,
online color measurement
Walter Höpfl Fahrzeug- und Weiding surface audit
Industrielackierung
Webasto Schierling GmbH Schierling disc control (elevating glass roofs),
top coat of paint
Westag & Getalit AG Rheda-Wiedenbrück surface inspection
Wieland Werke GmbH Verlbert control site
Wilhelm Karmann GmbH Osnabrück, Rheine top coat of paint
YACHTGLASS GmbH & Co. KG Dersum control sites
92 References - International

International (abstract)
AUDI Belgium, Brasilien, color matching, body shell, paint audit,
Hungary vehicle audit, installation audit, top coat of paint
BMW Brilliance Automotive China top coat of paint
BSH Electrical Appliances China, USA control site
Bugatti Automobiles France audit
Daimler Mexico top coat of paint
Daimler Chrysler China audit
DERICHEBOURG ENERGIE France surface audit
DTNA Daimler Trucks North USA control sites, polishing defects control sites
America
DURA Automotive Czech Republic control site
Hyundai China, Czech Republic topcoat preparation, finish
EPCOS Indonesia control sites
FCA Fiat Chrysler USA control sites
FORD Belgium, Romania, top coat of paint, surface audit, body shell
Spain, Turkey
General Motors China, USA color matching, control sites for polishing defects
Gestamp-Severstal-Kaluga Russia audit site
Italdesign-Giugiaro Italy surface audit
Jaguar Land Rover Great Britain top coat of paint
Kia Motors India, Slovakia spotrepair, surface audit, top coat of paint
Kronospan Luxembourg, control sites, online color measurement
Switzerland
MAGNA Heavy Stamping Austria audit
MAGNA STEYR Austria, Slovenia control sites, color matching
Merck KGaA China color matching lighting laboratory
NEDCAR Belgium, Netherlands top coat of paint
NEUMAN Aluminium Austria control sites
Otto Fuchs Hungary control site
Plastic Omnium Poland, Slovakia, USA installation- and control sites
Peugeot Citroën France top coat of paint
REHAU Automotive Hungary control site
Renault China, Korea, Morocco, top coat of paint, body shell, finish
Romania, Spain, Turkey
Rolls-Royce Motor Cars Great Britain color matching
Scania Group, Oskarshamn Sweden surface audit
Seat Martorell, Martorell Spain top coat of paint, body shell
 References - International 93

International (abstract)
Skoda Auto Slovakia, audit, top coat of paint, color matching
Czech Republic
smart France France audit, Finish
SMR Hungary audit
TST Agencies Technology South Africa body shell
Systems Trade
Volkswagen Argentina, China, India, color matching, online color measurement,
Mexico, Poland, Slovakia, body shell, audit, top coat of paint, finish,
South Africa , USA control sites, surface audit, press plant
94
OLIGO Lichttechnik GmbH
surface controls
Lange Felder 6
19309 Lenzen (Elbe)
Germany
✆ +49 38792 985 - 0
 +49 38792 985 - 33

Technology Centre South

OLIGO Lichttechnik GmbH
surface controls
Röntgenstraße 38
86368 Gersthofen

 info@surface-controls.de
 www.surface-controls.de Last revised 03/2019