Scribd
Upload
101 views1 page

Comparision Table For Typical Emission Data of Each Engine Type

This document compares the typical emission data of different engine types, including NOx, SOx, CO, HC, and particulates. It shows the emission levels in units of ppm or mg/Nm3 at 100% maximum continuous rating for various engine models, including 12K90MC-S, 12K80MC-S, 12K60MC-S, 12L35MC-S, 8L42MC-S, ZAV40S, MAN32/40, and HOLEBY28/32. Particulate emissions should be less than 50 μg/m3 for plants over 50MWe, except when using heavy fuel oil, and generally below 100 μg/Nm3 but not exceeding 150

Uploaded by

myungkwan ha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
101 views1 page

Comparision Table For Typical Emission Data of Each Engine Type

This document compares the typical emission data of different engine types, including NOx, SOx, CO, HC, and particulates. It shows the emission levels in units of ppm or mg/Nm3 at 100% maximum continuous rating for various engine models, including 12K90MC-S, 12K80MC-S, 12K60MC-S, 12L35MC-S, 8L42MC-S, ZAV40S, MAN32/40, and HOLEBY28/32. Particulate emissions should be less than 50 μg/m3 for plants over 50MWe, except when using heavy fuel oil, and generally below 100 μg/Nm3 but not exceeding 150

Uploaded by

myungkwan ha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

each engine emission data

COMPARISION TABLE FOR TYPICAL EMISSION DATA OF EACH ENGINE TYPE


ITEM UNIT ENGINE TYPE
12K90MC-S 12K80MC-S 12K60MC-S 12L35MC-S 8L42MC-S ZAV40S MAN32/40 MAN32/40 HOLEBY28/32
(440 kW/cyl.) (480 kW/cyl.)

Heat rate
output :12960 kW

1. NOx ppm 1450 1445 1180 1075 1055 980 950 940 1050
(No fuel bound nitrogen) at 15% O2 ** Remarks

at 100 % MCR as NO2,dry All NOx data are without fuel bound NOx base

2.SOx ppm 350 380 380 390 390 690 490 490 485
at 100 % MCR at 15% O2 BASED ON BASED ON BASED ON BASED ON BASED ON BASED ON BASED ON BASED ON BASED ON

as SO2,dry 1.8 % S 2%S 2%S 2%S 2%S 3.5 % S 2.5 % S 2.5 % S 2.5 % S

3.CO mg/Nm3 125 125 125 119 110 160 88 98 63


at 100 % MCR at 15% O2
dry

4.HC mg/Nm3 136 120 130 126 135 30 67 123 -

at 100 % MCR at 15% O2


dry

5.Particulates mg/Nm3 220 195 130 185 185 70 - - 75

at 100 % MCR at 15% O2 : For all plants or units greater than 50 MWe, PM emission levels should be less than 50 ㎍/m3.
dry : For all plants or units greater than 50 MWe when heavy fuel oil is being used as a fuel in unpolluted airshed

(annual average of less than 50 ㎍/m3 for PM10) for projects applying for funding before Jul. 01, 2003.

: For other cases, PM emission levels should be less than 100 ㎍/Nm3, but in no cases it should not exceed
150 ㎍/Nm3.

1 쪽

You might also like