Product page >
Data Sheet
Optimux-108L
Fiber Multiplexer for 4E1 and Ethernet
• Four E1 channels and Fast Ethernet link multiplexed over a fiber optic link
• Various fiber interfaces: multimode, single-mode (up to 120 km), and/or single-mode
over single fiber
• Management via dedicated Ethernet port, SNMP management station, Telnet or Web
Server
• Transparent clocking
The Optimux-108L multiplexer combines MARKET SEGMENTS AND OPTICAL INTERFACES
four E1 channels and an optional Ethernet APPLICATIONS Optimux-108L features a variety of built-in
link over a fiber optic uplink. Optimux-108L transparently extends TDM optical uplink interfaces including:
A pair of Optimux-108L units provides a and Ethernet services over fiber links. • 1310 nm LED for multimode fiber
simple and cost-effective solution for Optimux-108L serves mobile operators for
connectivity over distances of up to • 1310/1550 nm laser diode or long haul
2G/Wimax backhauling over fiber (see laser diode for extended range over
120 km (74.5 miles). Figure 1). single-mode fiber
Optimux-108L is available in two versions. Carriers and service providers can use
The default is a fully-managed unit with • Single fiber (SF1, SF2, SF4, SF5
Optimux-108L for TDM and ETH options) using a 1310 nm and
the management Ethernet port. aggregation to PDH/SDH/SONET with clear
Optimux-108L can also be ordered with 1550 nm laser diode transmitter with
migration to IP networks over fiber. WDM technology, which enables the
basic management capabilities
(Optimux-108L/BM). The latter unit is Enterprises, utility and transportation laser to transmit the signal at a
equipped with DIP switches. companies can use Optimux-108L for TDM different wavelength than the receive
and ETH services in P2P/Star topologies signal
Optimux-108L is a compact standalone over dark fiber. • Single fiber (SF3 option) using SC/APC
unit, available in a plastic or metal
(Angle-Polished Connector)
enclosure. The optional rack-mount
technology, with a 1310 nm laser
adapter kits enable installation of one or diode for single wavelength operation.
two (side-by-side) units in a 19-inch rack.
Optimux-108L
Fiber Multiplexer for 4E1 and Ethernet
TDM MONITORING AND DIAGNOSTICS POWER
Optimux-108L has four balanced or four Optimux-108L features comprehensive Optimux-108L may be ordered with two
unbalanced E1 tributary channels. test and diagnostic capabilities that different power supplies:
Each of the four signals of the tributary include local and remote loopbacks on the • Wide-range AC/DC power supply
interface is transmitted independently, uplink interface and on each E1 tributary that can be connected to either an
ensuring that each channel can be set to a channel. The loopbacks can also be AC power source (100 to 240 VAC),
different clock source. generated via the corresponding or to a DC power source (-40 VDC
LRS-102/OP-108C or MP-4100/OP-108C to -125 VCD)
MANAGEMENT AND SECURITY card or Optimux-108 units.
• -48 VDC on-board power supply
A fully-managed Optimux-108L can be In Optimux-108L/BM, local and remote (-40 to -57 VDC).
configured and managed remotely or loopbacks can also be generated using the
locally via the Ethernet management port local DIP switch of the local or remote
using: Optimux-108L unit.
• SNMPv1 management station To facilitate system diagnostics,
• Web Server Optimux-108L features LED status
indicators, AIS alarm recognition, and LOS
• Telnet.
alarm recognition on the optical link and
An Optimux-108L/BM can be managed on E1 channels 1 to 4.
remotely using one of the following:
• Remote OP-108C card in an
LRS-102 or Megaplex-4100 chassis
• Fully-managed Optimux-108L unit
• Optimux-108 unit.
Metro
Ethernet
2G BSC
E1
n x FE
BTS
Transport n x E1
Fiber E1 IMA
Network WiMAX
Optimux-108L
Node B
Switch Modular 5
Modular 5
LRS-102 with Ethernet
OP-108C
3G BSC
Figure 1. Cellular Range Extension over Fiber {LRS should be non-subject}
Data Sheet
MANAGEMENT Ethernet ports)
Specifications On (yellow): link is up
Ethernet Management Port
OPTICAL INTERFACE Type: 10/100BaseT Off: link is down
Blinking: frames are transmitted
Number of Ports Connectors: Shielded RJ-45
One 100 (For both MNG and USER Ethernet
ports)
Type TIMING
On (green): 100 Mbps
Fiber Uplink: internal Off: 10 Mbps
Connectors E1 tributary: transferred transparently,
independent for each channel Physical
ST, SC, FC/PC, SC/PC
Plastic enclosure:
Note:
DIAGNOSTICS Height: 4.37 cm (1.7 in)
SF1/SF2/SF4/SF5 options are available with
SC connector only Width: 21.7 cm (8.5 in)
Local and remote loopbacks on uplink and
SF3 option is available with SC/APC Depth: 17.0 cm (6.7 in)
connector only.
on each E1 tributary link
Weight: 0.5 kg (1.1 lb)
Compliance Metal enclosure:
GENERAL
G.955 Height: 4.37 cm (1.7 in)
Environment Width: 21.5 cm (8.4 in)
E1 INTERFACES
Operating temperature: 0° to 55°C (32° to Depth: 15.3 cm (6.0 in)
Number of Ports 131°F) Weight: 0.7 kg (1.5 lb)
4 Extended temperature range (metal
enclosures only): -20° to 65°C (-4° to Power
Data Rate
149°F) Wide-Range
2048 kbps
Humidity: Up to 90%, non-condensing AC: 100 to 240 VAC
Line Coding DC: -48 VDC (-40 to -125 VDC)
Front Panel Indicators
HDB3 On-board
PWR
Impedance -48 VDC (-40 to -57 VDC)
On (green): power supply is OK
Balanced: 120Ω Off: power supply is off or faulty Power Consumption
Unbalanced: 75Ω Fully-managed product:
LOS/AIS LINK
Compliance On (red): Sync/signal loss on Uplink Wide-range: 18 VA, 6W
ITU-T Rec. G.703, G.823, On (yellow): AIS detected (products On-board -48 VDC: 5W
G.742 (Optimux-108L without Ethernet without user Ethernet port only) Optimux-108L/BM:
USER port) Blinking (yellow): Loop is performed on Wide-range: 11 VA, 2.7W
Connectors uplink (Optimux-108L/BM only) On-board -48 VDC: 2W
Balanced: RJ-45 Off: normal operation
Push Button
Unbalanced: two BNC LOS/AIS CH1 to CH4 SET DEF: returns IP Address, IP Mask and
On (red): Signal loss on channel Default gateway parameters to their
ETHERNET USER INTERFACE
On (yellow): AIS received on channel default values
Type Blinking (yellow): Loop is performed
10/100BaseT on channel (Optimux-108L/BM only)
Off: normal operation
Compliance
Ethernet: IEEE 802.3 Rear Panel Indicators
Connectors LINK SD
Shielded RJ-45 On (green): Optical signal is detected
Off: No optical signal is detected
Throughput
100 Mbps LINK/ACT (For both MNG and USER
Data Sheet
Optimux-108L
Fiber Multiplexer for 4E1 and Ethernet
and the product names Optimux and IPmux, are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders.
324-110-09/16 (2.0) Specifications are subject to change without prior notice. 1988–2016 RAD Data Communications Ltd. The RAD name, logo, logotype, and the terms EtherAccess, TDMoIP and TDMoIP Driven,
SPECIAL CONFIGURATIONS OPTIONAL ACCESSORIES
Ordering
Please contact your local RAD partner for RM-33-2
RECOMMENDED CONFIGURATIONS additional configuration options. Hardware kit for mounting one or two
plastic units into a 19-inch rack
OP-108L/B/ETH/SC/13L
SUPPLIED ACCESSORIES RM-35/P1
Fiber multiplexer for 4E1 and Ethernet,
AC power cord (when AC power supply is Hardware kit for mounting one metal unit
balanced E1 interface
ordered) in a 19-inch rack
OP-108L/B/ETH/SC/SF1
DC connection kit (when DC power supply RM-35/P2
Fiber multiplexer for 4E1 and Ethernet, is ordered) Hardware kit for mounting two metal units
balanced E1 interface, 10/100BaseT, SC in a 19-inch rack
CBL-RJ45/2BNC/E1/X
connector, Tx 1310 nm WDM laser, Rx
Adapter cable (if unbalanced E1 interface WM-35-TYPE4
1550 nm, single fiber
is ordered) Hardware kit for wall mounting of 8.5-inch
OP-108L/B/ETH/SC/SF2 units in metal enclosure
Fiber multiplexer for 4E1 and Ethernet,
balanced E1 interface, 10/100BaseT, SC
connector, Tx 1550 nm WDM laser, Rx
1310 nm, single fiber
OP-108L/B/ETH/SC/SF4
Fiber multiplexer for 4E1 and Ethernet,
balanced E1 interface, 10/100BaseT, SC
connector, Tx 1310 nm WDM laser, Rx
1550 nm, long-haul
OP-108L/B/ETH/SC/SF5
Fiber multiplexer for 4E1 and Ethernet,
balanced E1 interface, 10/100BaseT, SC
connector, Tx 1550 nm WDM laser, Rx
1310 nm, long-haul
OP-108L/BM/B/SC/13L
Fiber multiplexer for 4E1, Basic
Management, balanced E1 interface, SC
connector, 1310 nm single mode laser
OP-108L/BM/B/ETH/SC/13L
Fiber multiplexer for 4E1 and Ethernet,
Basic Management, balanced E1 interface,
10/100BaseT, SC connector, 1310 nm
single mode laser
International Headquarters North America Headquarters
24 Raoul Wallenberg Street 900 Corporate Drive
Tel Aviv 69719, Israel Mahwah, NJ 07430, USA
Tel. 972-3-6458181 Tel. 201-5291100
Fax 972-3-6498250, 6474436 Toll free 1-800-4447234
E-mail market@rad.com Fax 201-5295777
E-mail market@radusa.com
www.rad.com Order this publication by Catalog No. 803860
