Scribd
Upload
506 views1 page

Mill Test Certificate: 7.00 MM 3-Phase Chevron Indented P.C Single Wire, Low Relaxation

This document is a mill test certificate from Kiswire for a batch of 7.00mm 3-phase chevron indented P.C single wire that was produced for Panwire Products (M) Sdn Bhd. It provides the results of dimensional, physical, mechanical and finish property tests to verify the wire meets the specification of JIS G 3536:2008 Grade 1700. The batch consisted of 31 coils with a total net weight of 19,503kg. All test results were within specification limits.

Uploaded by

Jun Xian Wai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
506 views1 page

Mill Test Certificate: 7.00 MM 3-Phase Chevron Indented P.C Single Wire, Low Relaxation

This document is a mill test certificate from Kiswire for a batch of 7.00mm 3-phase chevron indented P.C single wire that was produced for Panwire Products (M) Sdn Bhd. It provides the results of dimensional, physical, mechanical and finish property tests to verify the wire meets the specification of JIS G 3536:2008 Grade 1700. The batch consisted of 31 coils with a total net weight of 19,503kg. All test results were within specification limits.

Uploaded by

Jun Xian Wai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Plo 475 A, Jalan Tengar, P.O Box 101, Kaw.

Perindustrian Tanjung Langsat, 81707 Pasir Gudang, Johor, Malaysia.


Plo 475, Jalan Keluli 2, P.O.Box 101, 81707 Pasir Gudang, Johor, Malaysia.
TEL : 607-2512475 FAX : 607-2510870 www.kiswire.com.

MILL TEST CERTIFICATE


Serial No. : SW-0006-2017 Date : 2017/03/25
To Messrs : PANWIRE PRODUCTS (M) SDN BHD Invoice No. : 2017-03-601/MP17032
Batch &Coil No.:
01M00001 - 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31

Commodity : 7.00 mm 3-PHASE CHEVRON INDENTED P.C SINGLE WIRE, LOW RELAXATION
Specification :JIS G 3536 : 2008 Grade : : 1700 Total Net Weight : 19,503.00 Kgs

1. Dimensions and Physical Properties

Unit Test Results


Test items Specification
Min. Max. Ave. Std. Dev
Diameter 6.950 - 7.050 mm 6.976 6.999 6.988 0.010
Mass Per Length (For information only) 0.2947 - 0.3067 kg/m 0.3000 0.3020 0.3010 0.001
Breaking Strength Min. 65.42 kN 65.43 67.06 66.12 0.487
Tensile Strength 1,700 - , N/mm² 1,712 1,746 1,726 9.963
0.1% Proof Yield Strength Min. 56.60 kN 56.95
Elongation ( with Length >= 100 mm) Min. 3.5 % 4.6 6.9 5.1 0.540
Bend Test Min. 3 Times 4 6 5 0.551
Depth of Indent 0.100 - 0.180 mm 0.113 0.139 0.120 0.006
Straightness Max. 25.00 mm/1m 1.2 4.1 2.8 0.971
Modulus of Elasticity kN/mm² 196.5
Relaxation at (1000) Hrs ()% of (BS) Max. % -
Load Strain Relationship see attached graph

2. Finish
Stress Relieving : Each Wire Had Been Subjected To Stress - Relieving
Continuous Heat Treatment After Drawing

THIS IS TO CERTIFY THAT THE ABOVE PARTICULARS ARE CORRECT.

Q.A Manager
Kiswire

You might also like