DIGITRON SEMICONDUCTORS
MAC15(A) SERIES SILICON BIDIRECTIONAL THYRISTORS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating Symbol Value Unit
Peak repetitive off-state voltage (1)
(TJ = -40 to +125°C)
MAC15-4, MAC15A-4 200
VDRM Volts
MAC15-6, MAC15A-6 400
MAC15-8, MAC15A-8 600
MAC15-10, MAC15A-10 800
Peak gate voltage VGM 10 Volts
RMS on-state current (full sine wave, 50 to 60Hz, TC = 90°C) IT(RMS) 15 Amps
Circuit fusing considerations (t = 8.3ms) I2 t 93 A2s
Peak non-repetitive surge current
ITSM Amps
(1 cycle, 60 Hz, TC = 80°C, preceded and followed by rated current) 150
Peak gate power
PGM Watts
(TC = 80°C, pulse width = 2µs) 20
Average gate power
PG(AV) Watts
(TC = 80°C, t = 8.3ms) 0.5
Peak gate current IGM 2.0 Amps
Operating junction temperature range TJ -40 to +125 °C
Storage temperature range Tstg -40 to +150 °C
Note 1: VDRM for all types can be applied on a continuous basis. Blocking voltage shall not be tested with a constant current source such that the voltage ratings of the devices are
exceeded.
THERMAL CHARACTERISTICS
Characteristic Symbol Maximum Unit
Thermal resistance, junction to case RӨJC 2 °C/W
ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage, unless otherwise noted)
Characteristic Symbol Min Typ. Max Unit
Peak blocking current
(Rated VDRM @ TJ = 25°C) IDRM - - 10 µA
(Rated VDRM @ TJ = 125°C) - - 2 mA
Peak on-state voltage
VTM Volts
(ITM = 21A peak, pulse width = 1 to 2 ms, duty cycle ≤ 2%) - 1.3 1.6
Gate trigger current (continuous dc)
(VD = 12V, RL = 100Ω)
MT2(+),G(+) - - 50
IGT mA
MT2(+),G(-) - - 50
MT2(-),G(-) - - 50
MT2(-),G(+) “A” suffix only - - 75
Gate trigger voltage (continuous dc)
(VD = 12V, RL = 100Ω)
MT2(+),G(+) - 0.9 2
MT2(+),G(-) - 0.9 2
MT2(-),G(-) VGT - 1.1 2 Volts
MT2(-),G(+) “A” suffix only - 1.4 2.5
(VD = Rated VDRM, RL = 10kΩ, TJ = 110°C)
MT2(+), G(+); MT2(-), G(-); MT2(+), G(-) 0.2 - -
MT2(-), G(+) “A” suffix only 0.2 - -
144 Market Street phone +1.908.245-7200 sales@digitroncorp.com
Kenilworth NJ 07033 USA fax +1.908.245-0555 www.digitroncorp.com
Rev. 20131205
DIGITRON SEMICONDUCTORS
MAC15(A) SERIES SILICON BIDIRECTIONAL THYRISTORS
Characteristic Symbol Min Typ. Max Unit
Holding current (either direction)
IH mA
(VD = 12V, gate open, IT = 200mA) - 6 40
Turn on time
tgt µs
(VD = rated VDRM, ITM = 17A, IGT = 120mA, rise time = 0.1µs, pulse width = 2µs) - 1.5 -
Critical rate of rise of commutation voltage
(VD = Rated VDRM, ITM = 21A, commutating di/dt = 7.6A/ms, gate unenergized, dv/dt(c) - 5 - V/µs
TC = 80°C)
MECHANICAL CHARACTERISTIC
Case TO-220AB
Marking Body painted, alpha-numeric
Pin out See below
144 Market Street phone +1.908.245-7200 sales@digitroncorp.com
Kenilworth NJ 07033 USA fax +1.908.245-0555 www.digitroncorp.com
Rev. 20131205
DIGITRON SEMICONDUCTORS
MAC15(A) SERIES SILICON BIDIRECTIONAL THYRISTORS
144 Market Street phone +1.908.245-7200 sales@digitroncorp.com
Kenilworth NJ 07033 USA fax +1.908.245-0555 www.digitroncorp.com
Rev. 20131205
