Scribd
Upload
117 views5 pages

Active Autowerke X6/X6M X5/X5M DME DME Removal Instructions: Tools Needed

The document provides instructions for removing a DME (engine control module) from various BMW models for shipping to Active Autowerke for reprogramming. It involves removing plastic nuts and clips to access the DME, disconnecting electrical connectors, and carefully removing the DME unit. It advises not to operate the vehicle once the DME is removed and to safely pack the DME for shipping back to Active Autowerke with the customer's contact and vehicle information printed on the provided form.

Uploaded by

Iemel holgerson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views5 pages

Active Autowerke X6/X6M X5/X5M DME DME Removal Instructions: Tools Needed

The document provides instructions for removing a DME (engine control module) from various BMW models for shipping to Active Autowerke for reprogramming. It involves removing plastic nuts and clips to access the DME, disconnecting electrical connectors, and carefully removing the DME unit. It advises not to operate the vehicle once the DME is removed and to safely pack the DME for shipping back to Active Autowerke with the customer's contact and vehicle information printed on the provided form.

Uploaded by

Iemel holgerson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Active Autowerke X6/X6M X5/X5M DME

DME Removal Instructions

Tools Needed:
13mm socket
Small Flat Head Screwdriver

1. Turn the 4 13mm plastic nuts ¼ turn counterclockwise to release.

2. Now Turn the 3 13mm Plastic nuts to replace the panel. Also Unplug
the electrical sensor
3. Release the two tabs inside the cowling. Then using a small flathead
screwdriver, pry up on the inner pin to release the plastic rivet

4. Now remove the electronic box cover by first releasing the spring
clips. Then using a small screwdriver release the three retaining tabs

5. Now Remove the five electrical connectors from the DME and slide
the unit up and out
6. Make sure do not try and move the car once the DME has been
removed. Do not place the Key fob in the car or turn on the ignition,
this my cause the EWS system to go out of alignment

7. Now safely pack the computer and ship it to:

Active Autowere
9940 SW 168th Terrace
Miami, FL 33157

Please Print and send the next page with your DME
PRINT OUT
THIS FORM

SEND BACK
WITH ECU

Customer’s Name: ____________________________________

Shipping Address: ____________________________________

____________________________________

____________________________________

Phone Number: ____________________________________

E-Mail: ____________________________________

Invoice # ____________________________________

Model:___________ Year:________ Trans:_________________

V.I.N. _______________________________________________

Engine type: __________________________________________

Engine Modifications : ___________________________________

Please ship your DME to: Active Autowerke


9940 S.W. 168 Terrace
Miami, FL 33157
USA
305-233-9300

It is advisable to insure this package with your carrier of choice for a value of
approximately $1,000.00 USD.
International Customers are responsible to pay for all customs and duty charges.
Instructions on the air bill should indicate this. If not, Active Autowerke has the
right to either refuse the package or assess an estimation of the charges and will
not release the reprogrammed DME until payment has been received.

You might also like