Oil Concentrator ®

More Complete Oil/Water Separation

• Slashes disposal costs by providing water-free oil for
disposal
• Oil/water separation is virtually complete
• Helps increase the recycle value of skimmed oil
• Saves costly coolant and washing solutions from
premature disposal
• Available for all Abanaki oil skimmers

General Description
The Abanaki Oil Concentrator provides virtually complete oil/
water separation for recycling or disposal of either liquid.
Under most operating conditions, Abanaki skimmers pick up
oil with only small traces of water. However, as surface oil is
reduced to a thin layer (1/16 inch thick or less), more water (or
coolant) may be picked up along with the oil. When used in
tandem with an oil skimmer, the Oil Concentrator solves this
problem by providing final phase separation. The result is water
(or coolant) available for recycling, and virtually water-free oil
for disposal.
The Oil Concentrator is non-electrical and contains no moving
parts — it simply receives liquid directly from the skimmer.
Based on the principle of gravity separation, the Concentrator
tank is sized so that there is adequate dwell time for the oil
and water to separate. Water discharge is through a tube
that has an open end near the bottom of the Concentrator,
while oil flow is through a separate drain port near the top.
As additional liquid enters the Concentrator, water and oil are
forced out through their respective discharge tubes and ports.
A sludge screen provides additional dwell time for separation
while preventing debris from contaminating either the water or
the oil.
Installed at the discharge end of the oil skimmer, the
Concentrator comes complete with mounting bracket,
removable sludge screen and drain plug for easy cleaning.
An optional thermostatically controlled heater is available
for use with thick oils, or when the application is in freezing
temperatures. (A heater should not be used in environments
where explosive fumes might be present.)
Abanaki recommends the use of the Concentrator with all
oil skimmers. It increases the efficiency of the skimmer and
reduces costs associated with oil disposal.

Oil Concentrator Advantages

• Easy mounting
• Small space requirements
Typical Oil Concentrator • No skimmer modifications needed
Installation • Needs no electricity, timers, sensors or pumps
• Minimal maintenance
• No moving parts

Clean
Our
World!
Skimmerman™
Oil Concentrator ®

Dimension, Weights, and Options

Key Features of Abanaki Oil Optional Optional
Concentrators Model A B C Weight Hose Kit Heater Used With
• Mounts easily on all Abanaki skimmers 10.00˝ 5.75˝ 15.6˝
OC-100 10 lbs. Tes Yes Models 4 and 8
(254mm) (146mm) (396mm)
• Brackets and hardware supplied by
18˝ 12˝ 24˝
Abanaki OC-200
(457mm) (305mm) (610mm)
70 lbs. Yes Yes Multi-Belt Models
• Sludge screen keeps large debris out of 2.25˝ 3.05˝ 7.00˝ TubeTastic, Mighty Mini,
skimmed oil ODM-50 0.4 lbs. Yes No
(57mm) (77mm) (179mm) Economini, Li’l Blue
• Drain plug facilitates routine 4.50˝ 6.25˝ 9.75˝
ODM-100 4 lbs. Yes No Mighty Mini and Tote-It
maintenance (114mm) (159mm) (248mm)
• Optional heater keeps oil flowing in
cold environments Models OC-100/200

Specifications
See installation drawings for additional detail.
Applications and Volumes:
• OC-200 for all Multi-Belt units: 17 gallons
(64.4 liters).
• OC-100 for Model 8 and Model 4: 2.5 gallons
(9.5 liters).
• ODM-100 for Tote-it and Mighty Mini: 0.56
gallons (2.1 liters).
• ODM-50 for TubeTastic, Mighty Mini,
Economini, and Li’l Blue: 12 ounce capacity
Materials :
• OC-100 and 200: steel weldments with a
corrosion-resistant coating.
• ODM-100: fiberglass construction. Model ODM-50
• ODM-50: calcium carbonate filled
polypropylene 7.00
3.05
Mounting Method
All brackets and hardware supplied by Abanaki
— no skimmer modifications required.
Mounting Area and Weights1
2.25
• See installation drawings and tables.
OIL
Operating Limits2 : WATER
• Temperature of liquid: 33˚–212˚F (0.5˚–100˚C).
BARBED OUTLETS
• Carbon Steel units: pH of liquid: 5–10. FOR 3/4" I.D. HOSE
• Fiberglass or Stainless units: pH of liquid:
0–13. Model ODM-100
• Poly carbonate filled polypropylene: pH of
liquid 5–10.
Options (Specify)
Models OC-100 and OC-200:
• Stainless steel construction.
• Thermostatically controlled (500W/110v)
heater.
• Discharge hose kits for oil and water outlets
(see installation drawing and table).
Models ODM-50 and ODM-100:
• Discharge hose kits for oil and water outlets
(see installation drawing and table).
Specification Notes
1. Oil Concentrators are UPS shippable.
2. Consult factory for recommendations covering
operating conditions not listed above.

©Copyright 2015 Abanaki Corporation