Scribd
Upload
182 views1 page

Telecom Engineers: XPol Panel Specs

The document describes a multi-band dual polarization panel antenna with the following specifications: - It operates within the frequency range of 1710-2690 MHz with both +45 and -45 degree polarizations. - It has a half-power beamwidth of 65 degrees and a maximum gain of 18 dBi. - Electrical tilt can be continuously adjusted between 0 and 12 degrees. - Additional specifications include front-to-back ratio, isolation between ports, maximum power handling, and mechanical dimensions.

Uploaded by

Madalina Jarii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
182 views1 page

Telecom Engineers: XPol Panel Specs

The document describes a multi-band dual polarization panel antenna with the following specifications: - It operates within the frequency range of 1710-2690 MHz with both +45 and -45 degree polarizations. - It has a half-power beamwidth of 65 degrees and a maximum gain of 18 dBi. - Electrical tilt can be continuously adjusted between 0 and 12 degrees. - Additional specifications include front-to-back ratio, isolation between ports, maximum power handling, and mechanical dimensions.

Uploaded by

Madalina Jarii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Multi-band Panel 1710 – 2690

Dual Polarization X
Half-power Beam Width 65°

XPol Panel 1710–2690 65° 18dBi 0°–12°T ESLS


s
clamped
Type No. 80010621V01 in c lu d

1710 – 2690
Frequency range 1710 – 1990 MHz 1920 – 2200 MHz 2200 – 2490 MHz 2490 – 2690 MHz
Polarization +45°, –45° +45°, –45° +45°, –45° +45°, –45°
Gain (dBi) 17.4 ... 17.4 ... 17.3 18.2 ... 18.0 ... 17.9 18.2 ... 18.1 ... 17.7 18.3 ... 18.0 ... 17.6
Tilt 0° ... 6° ... 12° 0° ... 6° ... 12° 0° ... 6° ... 12° 0° ... 6° ... 12°
Horizontal Pattern:
Half-power beam width 68° 64° 61° 60°
Front-to-back ratio (180°±30°) > 25 dB > 25 dB > 25 dB > 25 dB
Cross polar ratio 0° Typically: 25 dB Typically: 25 dB Typically: 25 dB Typically: 25 dB
Sector ±60° > 10 dB > 10 dB > 10 dB > 10 dB
Tracking, Avg. 1.0 dB
1800/1900/200/2600

Vertical Pattern:
Half-power beam width 7.1° 6.5° 5.9° 5.7°
XPol

Electrical tilt 0°– 12°, continuously adjustable


Sidelobe suppression   0° ... 6° ... 12° T   0° ... 6° ... 12° T   0° ... 6° ... 12° T   0° ... 6° ... 12° T
– for first sidelobe above main beam ≥ 18 ... 18 ... 18 dB ≥ 18 ... 18 ... 18 dB ≥ 18 ... 18 ... 18 dB ≥ 18 ... 18 ... 18 dB
– within 0°–20° sector above horizon ≥ 17 ... 17 ... 16 dB ≥ 17 ... 17 ... 16 dB ≥ 16 ... 18 ... 17 dB ≥ 17 ... 17 ... 17 dB
VSWR < 1.5
Isolation, between ports > 30 dB
Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier)
Max. power per input 400 W (at 50 °C ambient temperature)
Input 2 x 7-16 female
Connector position Bottom
Adjustment mechanism 1 x, Position bottom continuously adjustable
Wind loa (at 150 km/h) Frontal / lateral / rearside: 370 / 135 / 420 N
Height/width/depth 1410 / 154 / 70 mm
Category of mounting hardware M (Medium)
Weight 6.5 kg / 8.5 kg (clamps incl.)
Scope of supply Panel and 2 units of clamps for 42 – 115 mm diameter

76 For more information about additional mounting accessories please refer to page 201

You might also like