Scribd
Upload
486 views1 page

Alfa Romeo 147 00: Specific Vehicle Alarm Fitting Instructions Rev. 00

This document provides instructions for fitting a specific vehicle alarm to an Alfa Romeo 147 from 2000-present. It details the positioning of alarm components, such as locating the central unit under the dashboard and alarms in the engine compartment. Wiring connections are specified for functions like power supply, ignition, direction indicators, electric windows, door locking, immobilization, starter, and sensors for the bonnet, doors and boot. A note states this is only an example and the actual installation manual should be followed.

Uploaded by

Morosan Dimitrie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
486 views1 page

Alfa Romeo 147 00: Specific Vehicle Alarm Fitting Instructions Rev. 00

This document provides instructions for fitting a specific vehicle alarm to an Alfa Romeo 147 from 2000-present. It details the positioning of alarm components, such as locating the central unit under the dashboard and alarms in the engine compartment. Wiring connections are specified for functions like power supply, ignition, direction indicators, electric windows, door locking, immobilization, starter, and sensors for the bonnet, doors and boot. A note states this is only an example and the actual installation manual should be followed.

Uploaded by

Morosan Dimitrie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV.

00
www.cobra.it

PETROL X
MAKE ALFA ROMEO MOD. 147 YEAR. 00 → DIESEL

ALARM/SIREN Position the compact alarms and the sirens on the support of the servobrake in
POSITION the engine compartment.

CENTRAL UNIT POSITION The modular systems and the modules should be positioned under the
dashboard, driver’s side.

POWER SUPPLY +30: connect to the positive end of the battery.


-31: connect directly to the car body.
2
IGNITION WIRE +15/54: Connect to the 2 mm ORANGE wire located in the wiring harness
coming out of the connector of the ignition key.

DIRECTION INDICATORS The electric system of the car has the direction indicators lines divided, so it is
suggested to divide the following wires by means of 6 diodes: LIGHT
BROWN/BLACK (ant. left), BROWN/VIOLET (ant. right), BROWN/WHITE (lat.
left), BROWN/YELLOW (lat. right), these wires are located in the 40 way light
blue connector and BROWN/BLACK (post. left), BROWN/VIOLET (post. right)
are located in the 40 way black connector in the fuse box.

ELECTRIC WINDOWS Positive control signal


Front window, driver’s side:
2
cut the the 1 mm GREY wire located in the 26 way connector inside the driver’s
side door.
Front window, passenger’s side:
2
cut the 1 mm VIOLET/BLACK wire located in the wiring harness behind the sill
cover driver’s side.

CENTRAL DOORS LOCKING Negative control signal


Connect to the RED/WHITE wire (lock) and to the LIGHT BLUE wire (unlock)
located in the 40 way black connector under the fuse box.

IMMOBILISATION POINT Fuel pump


2
Cut the 2 mm VIOLET/YELLOW wire located in the bundle of cables behind the
sill cover, driver’s side.

STARTER +50: Cut the BROWN wire located in the wiring harness coming out of the
ignition key.

BONNET SWITCH Install an additional switch on the front headlamp support grill, driver’s side.

DOORS SWITCH Connect to the LIGHT BLUE/YELLOW wire located in the wiring harness
coming out of the lamp.

BOOT SWITCH Connect to the BROWN/GREY wire coming out of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed al14700gbb.doc

as per the instructions given on the product installation manual.

You might also like