Profi Liner
Type: SDP 27 eLB4-CS
Profi Liner 4 in sliding roof design
13.620 mm i.L.
2.700 mm
2.600 mm
4.000 mm
2.550 mm 1.668 mm 7.630 mm
Technical data: Multi Lock side rave as standard:
Type: SDP 27 eLB4-CS
King pin load: 12,000 kg Award winning Multi Lock side rave including load securing positions
every 100 mm. Load securing even diagonally to the driving direction
Axle load (technically possible): 27,000 kg with more than 3000 strapping positions. Cost-effective and with best
Allowable gross weight (technically possible): 39,000 kg benefit.
Tare weight: approx. 6,160 kg No matter
which loads
Payload (technically possible): approx. 32,840 kg should be trans-
Axle spread: 1,310 / 1,310 mm ported, with the
new Multi Lock-
Neck height: 125 mm / Multi Blocksy-
5th wheel height: 1,050 - 1,170 mm stem the loads
are perfectly
Side access lenght: 13,620 mm secured.
Side access height: 2,575 – 2,800 mm
Side acces width: 2,480 mm
Turning radius: 2,040 mm
(Dimensions and weights for standard units)
Technical description:
Multi Lock side rave including load securing positions every 100 mm Alloy cant rail, continuous, for support of sliding curtain and posts, krone-
sliding roof, height 130 mm, Roof also movable to the front and rear, Roof
2 mechanically operated landing legs, 2 x 12 tonnes capacity, half round
reinforcement by steel wire ropes for load safety certificate; 4 sets of wooden
compensating feet
planks
Low-maintenance axles with air suspension and disc brakes (430 mm); raise/
Front wall with solid corner posts; lateral restricted through loading; Front
lower valve incl. auto reset valve; Rims centre nave
wall reinforced with plywood inner skin; quick release for side curtains on
Tyres: 6 x 385/65 R 22.5, brand: Krone choice front wall; retainer for curtain cord
Wheel covering according to EC-regulations; Spray suppression according Steel container rear doors including bolted steel frame, integrated double
to EC-guidelines door looks and concealed door hinges; roof header hinged and movable
spare wheel carrier as an option
3 pairs of side posts, symmetrical ; plank pockets for posts
EC braking system including vehicle stabilising system; low-maintenance
automatic; spring-loaded hand brake; 2S/2M EBS system, 2 sensors on each Delta shaped rubber profiles at rear; delta steel buffers at rear; load security
axle with RSS, diagnostics on ISO 7638 socket (EBS) certificate according EN 12642 Code XL
1 PVC curtain with full lengths vertical reinforcements, top with rollers for
24 volts lighting system with 2 x 7-pin socket DIN ISO 1185/3731; front and
sliding curtains, bottom with tensioners, curtain tensioner out of stainless
rear marker lights; with two multi-function rear lights acc. to EC incl. rear
steel
fog light and reversing lights; 2 contouring lights with rubber arm in LED;
side marker lights in LED Steel parts shot blasted, with KTL primer and high-quality surface coating
(standard painting single-colour); axles incl. wheel hubs painted black; un-
30 mm thick, phenolic coated plywood floor, cut surfaces fully waterproofed derrun protection and light panel powder coated white for safety reasons;
and sealed. Strength acc.to DIN 283; for floor loadings up to 7,000 kg stacker- wheels silver with high-quality paint finish; reflective outline marking ac-
truck axle load cording to ECE-R48
Subject to modifications!
VF/Beu issue 07/2015
Fahrzeugwerk Bernard KRONE GmbH, Bernard-Krone-Straße 1, D-49757 Werlte, Telefon +49 (0) 5951 209-0, Telefax +49 (0) 5951 2465
