Product Data Sheet

Edition: 14/11/2011
Identification no.
Version no.: UAE
®
Sikament -600

Sikament®-600
High Range Water-Reducing Concrete Admixture
®
Product Sikament -600 is a highly effective dual action liquid superplasticiser for the
production of free flowing concrete or as a substantial water-reducing agent for
Description promoting high early strengths. It imparts excellent slump retention for prolonged
periods.
This product is suitable for tropical and hot climatic conditions.
®
Uses Sikament -600 is used as a superplasticiser in the production of free flowing
concrete such as in;
 Slabs and foundations
 Walls, columns and piers
 Slender components with densely packed reinforcement
 Piles
It is also used as a water-reducing agent leading to high early strength concrete
such as in,
 Pre-cast concrete elements
 Pre-stressed concrete
 Bridges and cantilever structures
®
Advantages Sikament -600 provides the following properties:
As a Superplasticiser:
 Workability is greatly improved.
 Concrete is placed easily,
 Especially suitable for slender components with densely packed reinforcement.
 Concrete requires less vibrating.
 Improved cohesion of the concrete mix significantly reduces the risk of
segregation and allows greater time for placement.
As a Water Reducer:
 Up to 25% water reduction.
 Final strength improved up to 40%.

Tests
®
Approval / Standards Sikament -600 complies with ASTM C494 Type G and EN 934-2.

Product Data
Form Liquid
Appearance / Colour Brown
Packaging 1000 lt. flow bins.
Bulk supply in tanker trucks possible on request.

1 Sikament®-600 1/3
Storage
Storage conditions Store in a dry area and at temperatures between 5ºC and 35ºC. Protect from direct
sunlight and frost.
If frozen, gradually thaw and agitate until completely homogenised. Prolonged
storage longer than 6 months at temperatures > 35°C may result in premature
deterioration of the product or packaging.
Shelf Life 12 months minimum from date of production if stored properly in original unopened
packaging.

Technical Data
Chemical Base Sulphonated naphthalene based polymer
Density (at 25°C) Approximately 1.23 kg/lt
pH value 7-9
Chloride content Nil (EN 934-2)

Application Details
Dosage Recommended dosage: 0.6 - 2.0 % by weight of cement.
It is advisable to carry out trial mixes to establish the correct dosage.
®
Dispensing Sikament -600 can be added to the mixing water prior to its addition to the
aggregates or directly to the freshly mixed concrete (the plasticising effect is more
pronounced).
®
For Ready-mix concrete, Sikament -600 is added to the concrete mix immediately
prior to discharge and then further mixed for three minutes before discharging into
the delivery trucks.
Concrete Placing The standard rules of good concreting practice, concerning production and placing,
are to be followed. Refer to relevant standards.
Curing Fresh concrete must be cured properly, especially at high temperatures in order to
®
prevent plastic and drying shrinkage. Use Sika Antisol products as a curing agent
or apply wet hessian.
® ®
Compatibility Sikament -600 can be combined with Sika-Aer .
It is also compatible with sulphate resistant cement.
Cleaning Clean all equipment and tools with water immediately after use
®
Notes on Application / When using Sikament -600 a suitable mix design must be selected and local
Limitations material sources should be trialled.
When accidental overdosing occurs, the set retarding effect increases and
additional air is entrapped. During this period the concrete must be kept moist in
order to prevent premature drying out.
®
Sikament -600 should not be added to dry cement.
Before pouring, suitability tests on the fresh concrete must be carried out. Due to
the extended workability, take special care that formwork is properly installed and
secured.

2 Sikament®-600 2/3
 All technical data stated in this Product Data Sheet are based on laboratory tests.
Value Base Actual measured data may vary due to circumstances beyond our control.
Please note that as a result of specific local regulations the performance of this
Local Restrictions product may vary from country to country. Please consult the local Product Data
Sheet for the exact description of the product uses.

Health and Safety For information and advice on the safe handling, storage and disposal of chemical
products, users shall refer to the most recent Material Safety Data Sheet containing
Information physical, ecological, toxicological and other safety related data.
The information, and, in particular, the recommendations relating to the application
Legal Notes and end-use of Sika products, are given in good faith based on Sika's current
knowledge and experience of the products when properly stored, handled and
applied under normal conditions in accordance with Sika’s recommendations. In
practice, the differences in materials, substrates and actual site conditions are such
that no warranty in respect of merchantability or of fitness for a particular purpose,
nor any liability arising out of any legal relationship whatsoever, can be inferred
either from this information, or from any written recommendations, or from any other
advice offered. The user of the product must test the product’s suitability for the
intended application and purpose. Sika reserves the right to change the properties
of its products. The proprietary rights of third parties must be observed. All orders
are accepted subject to our current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data Sheet for the product
concerned, copies of which will be supplied on request.

All products are manufactured under a management system certified to conform to the requirements of the quality,
environmental and occupational health & safety standards ISO 9001, ISO 14001 and OHSAS 18001.

Sika UAE LLC Sika Gulf B.S.C Sika Saudi Arabia Co. Ltd
P.O. Box 126212 Building 925, Road 115 Obaikan Building
Dubai Sitra Area 601 Al-Zahra
United Arab Emirates Adliya, Kingdom of Bahrain Jeddah 23522-4522
Phone: +971 4 4398200 Phone: +973 17738 188 Saudi Arabia
Fax: +971 4 4393606 Fax: +973 17732 476 Phone: +966 2 692 7079
info@ae.sika.com sika.gulf@bh.sika.com Fax: +966 2 692 1272
www.sika.ae www.sika.com.bh www.sika.com.sa

3 Sikament®-600 3/3