STOODY Stoody® 130-O
A THERMADYNE Company Open Arc Wire
DESCRIPTION OPERATIONAL CHARACTERISTICS /
WELDING PARAMETERS
Stoody 130-O deposits provide the ultimate wear
resistance to cut earth formations because of the Diameter, In. (mm) 1/16 (1.6)
tungsten carbide particles contained in the wire. It Current, Amp. DC+ 90 – 120
can be applied readily to carbon or low alloy steel Voltage 18 – 24
and is not recommended for austenitic manganese Wire Extension ½”
steel. Shielding Gas None
Position Flat
Diameter, In. (mm) 7/64 (2.8)
TYPICAL DEPOSIT CHARACTERISTICS Current, Amp. DC+ 120 – 150
Voltage 18 – 24
Abrasion Resistance Excellent Wire Extension ½”
Impact Resistance Moderate Shielding Gas None
Deposition Layers 1 Position Flat
Surface Cross Checks Yes
Machinability No
Magnetic Yes
STANDARD SIZES & PACKAGING
ALLOY TYPE Diameter Packaging Part #
1/16” (1.6mm) 10# PS 11420800
Tungsten Carbide in an Iron Based Matrix 1/16” (1.6mm) 33# WB 11413200
7/64” (2.8mm) 60# Coil 11001100
TYPICAL APPLICATIONS
Typical applications include:
• Scoop Lips and Teeth
• Pug Mill Knives
• Cultivator Chisels
• Raymond Mill Plows
• Tillage Tools of All Types
• Muller Plows
• Ammonia Injectors
• Swing Hammers
• Augers and Auger Flights
• Ensilage Knives
Stoody Company PDS-WC-W-002
5557 Nashville Road • Bowling Green, KY 42101 Revision 2
1-800-426-1888 April 23, 2008
NOTICE - Failure to follow manufacturer's directions for use may result in equipment or material failure and void any applicable warranty. The data provided or referenced herein is provided for
informational purposes only, without guarantee or warranty and represents "typical" results when Stoody products are used in accordance with internal Stoody procedures. Other tests and
procedures may produce differing results. Stoody expressly disclaims any liability resulting from reliance on this data.
PROTECT YOURSELF AND OTHERS - Users should read and follow all recommended guidance on health and safety from their employer, the supplier, the manufacturer, and government
authorities. These, at a minimum including the Warning Labels on the products and the Material Safety Data Sheets ("MSDS"). The MSDS and additional safety information may be found on
materials or links at: www.stoody.com.
