ENGINE DRIVEN WELDERS

®
Vantage 500
Setting A New Standard!
If you are looking for a rugged, reliable and capable welder for demanding construction,
rental fleet or repair applications, take a close look at the Vantage 500. Standard stainless
steel roof and side panels, simple controls and Chopper Technology™ deliver the low
maintenance, long service life, easy operation and great arc performance every owner
appreciates. This multi-process powerhouse features 500 amps at 100% duty cycle, or
575 amps at 50%. Don’t pay extra for plenty of AC auxiliary power – up to 20,000 watts of
3-phase and 12,000 watts of 1-phase is standard. Select the 48 horsepower oil/air-cooled
Deutz engine or the 54 horsepower water-cooled Cummins engine. Either way, you can
depend on legendary engine reliability from well-known brands and superior Lincoln arc
performance.

Processes Description
CC DC 20
Stick TIG MIG Flux-Cored Gouging Output CV kW Input D

Advantage Lincoln Recommended General Options

• Corrosion-Resistant Stainless Steel Case Power Plug Kit, Full-KVA Power Plug Kit, Medium Welder Trailer,
- Standard stainless steel roof, side panels and engine-access Four-Wheeled Steerable Yard Trailer, Ether Start Kit, Spark Arrester
door deliver added protection, durability and corrosion- Kit, Control Panel Cover Kit, Lockable Fuel Cap/Flash Arrestor Kit,
resistance. Eliminates need to replace these items due to Service Indicator Kit
paint damage or rust.
Recommended Stick Options
• Simple to Operate
Accessory Kit, Remote Output Control
- Select one of four Process Modes, including CC-Stick,
Downhill Pipe (for stick), Touch-Start™ DC TIG or CV Wire, Recommended TIG Options
and then dial in the desired output. Pro-Torch® PTA-26V TIG Torch, Parts Kit, Foot Amptrol™, Hand
• Plenty of AC Generator Power Amptrol, Precision TIG 185 Ready-Pak, Invertec® V205-T AC/DC
- 20 kW continuous 3-Phase 240V AC generator power rated One-Pak™ Package, Full-KVA Adapter Kit
at output will power industrial equipment such as a plasma
cutter, pump, inverter welder or grinder.
Recommended Wire Feeder Options
- 12 kW continuous 1-phase AC generator power for common LN-25, LN-15 Across-The-Arc Wire Feeder, Magnum Innershield®
construction tools and lights. Gun, Drive Roll Kit, Gun Receiver Bushing, Magnum MIG Gun,
Magnum Gun Connector Kit, Magnum SG Spool Gun, SG Control
• Digital Weld Meters
Module, Input Cable
- Digital meters for amps and volts output make it easy to
precisely set your procedures. Fuel, Oil Pressure and Engine Recommended Plasma Options
Temperature gauges keep you on top of monitoring engine Pro-Cut 80
performance.
Order
• Three-Year Warranty
K2405-1 Vantage 500 Deutz
- Three-year Lincoln warranty on welder (engines are
K2406-1 Vantage 500 Cummins
warranted separately by the manufacturer). K2288-1 Vantage 500 Deutz, One-Pak, with Ball Hitch
K2288-2 Vantage 500 Deutz, One-Pak with Lunette Eye Hitch
K2289-1 Vantage 500 Cummins, One-Pak with Ball Hitch
K2289-2 Vantage 500 Cummins, One-Pak with Lunette Eye Hitch
K2290-1 Vantage 500 Deutz, Ready-Pak with Ball Hitch
K2290-2 Vantage 500 Deutz, Ready-Pak with Lunette Eye Hitch
K2291-1 Vantage 500 Cummins, Ready-Pak with Ball Hitch
K2291-2 Vantage 500 Cummins, Ready-Pak with Lunette Eye Hitch

TECHNICAL SPECIFICATIONS

Product Rated Output Output Engine Dimensions Net

Name Current/Voltage/Duty Cycle Range HP & Speed HXWXD Weight
500A/40V/100% 30-575A DC Model No. of Cyl. (rpm) Inches (mm) lbs (kg)
Deutz® F4L-2011
Vantage 500 550A/36V/60% 40-300A Pipe Diesel 4 48@1800 50.9 x 31.5 x 63.1 1532
575A/35V/50% 20-250A TIG EPA Tier II (1293 x 800 x 1603 (695)
14-40V CV
AC Power Cummins® B3.3 4 54@1890 50.8 x 31.5 x 63.1 1443
12,000 Watts, 1-Phase Diesel (1290 x 800 x 1603) (655)
20,000 Watts, 3-Phase EPA Tier II

Publication E6.216 11/04

www.lincolnelectric.com
 A CLOSER LOOK

PERFORMANCE
• Compare this to the common competitive standard of 4,000
Arc Performance
watts. No expensive options are required to add significant
• 500 amps @100% duty cycle and capable of 575 amps at 50% generator capacity.
duty cycle. All ratings are at temperatures of 104°F/40°C.
• Two 120V GFCI duplex receptacles. Circuit breaker protection.
• Arc Gouging - The Vantage 500 is capable of gouging with up to
a 3/8" carbon.
WHAT IS CHOPPER TECHNOLOGY?
• CC-Stick mode is optimized for general purpose stick using
E7018 low hydrogen electrode.

• Built-in “hot” start for easier starts and restrikes minimizing the
electrode “sticking” to the work.

• Downhill pipe mode with active arc force control - enhanced

downhill pipe welding mode. Excellent for cellulosic electrodes.
Fast travel speeds, especially on fill passes. Arc control adjust- Traditional weld control is more Chopper Technology
ment for a soft, buttery arc or a more forceful digging arc. variable around the desired output. delivers extremely fast response
for tighter output control.
• Standard Touch-StartTM DC TIG welding, not scratch start, for
easy arc starting that avoids tungsten contamination and the Patented and award-winning Lincoln Chopper Technology
need for high-frequency. delivers superior DC arc welding performance for general purpose
stick, Downhill Pipe, DC TIG, MIG, cored-wire and arc gouging.
• Excellent CV wire welding with cored-wire and MIG (CO2 and
Benefits of Chopper Technology include:
blended gas).
- Easy arc starting
- Smooth arc action
Generator Performance
- Low spatter levels
• 3-Phase 240V AC generator power rated at 20kW continuous - Excellent bead appearance
output to power industrial equipment such as a plasma cutter,
pump, inverter welder or grinder. Simultaneously weld and use
3-phase AC power - for example, up to 12,000 watts can be
WHAT IS TOUCH-START™ TIG?
delivered while welding up to 250 amps.

• 3-Phase 240V receptacle on control panel eliminates the need to Touch-Start™ TIG uses a very low voltage to sense when the
hard-wire the connections. Matching plug included. Compare to tip of the tungsten electrode is touched to the work piece.
competitive product which usually requires hard-wired When this occurs, a complete circuit is established. When the
connections. tungsten is then raised from the work piece, the circuit senses
a change in voltage and initiates the appropriate welding
• The Vantage 500 provides added value at the job site by delivering current and voltage to support the TIG welding process.
up to 12,000 watts of 1-Phase AC auxiliary power for equipment
such as a Lincoln plasma cutter. Also use for lights, grinders and Enjoy the added benefits of Lincoln’s Touch-Start TIG when
other common construction tools. And, you can simultaneously DC TIG welding. Not only do you avoid tungsten contamina-
weld and have access to AC power – The full 12,000 watts can tion when arc starting, but you also don’t need extra high
be delivered while welding at up to 250 amps. Plug in a Lincoln frequency equipment.
V275-S inverter for a second arc.

SIMULTANEOUS WELDING AND AUXILIARY POWER

1 Phase 3 Phase Simultaneous 1 and 3 Phase

Weld Amps Watts Amps Watts Amps Watts Amps

0 12000 50 20000 50 ---- 50

100 12000 50 17800 43 ---- 50
200 12000 50 14000 34 ---- 50
250 AND 12000 50 OR 12000 29 OR 12000 ----
300 10000 42 10000 24 10000 ----
400 5600 23 5600 13 5600 ----
500 0 0 0 0 0 0

Vantage 500
[2] www.lincolnelectric.com
 A CLOSER LOOK

FEATURES
• Simple Controls – Keep training time to a minimum with the • Automated Remote Control Capability – Output at welding
straightforward control panel of the Vantage 500. The flip-down terminals is automatically switched from the machine to the
control panel door keeps less frequently used dials out of the remote mode when a remote device is connected to the
way. Scratch-resistant Lexan® nameplate. standard 6 pin connector.

• Digital meters for amps and volts output make it easy to

precisely set your procedures. Fuel, Oil Pressure and Engine
Temperature gauges keep you on top of monitoring engine
performance.

• Two Great Engine Choices – Select the 48 horsepower

oil/air-cooled 4 cylinder Deutz F4L2011 engine, or the 54 horse-
power water-cooled 4 cylinder Cummins B3.3 engine. Each Automated Remote
engine has an automatic idler for greater fuel economy and Control Capability
reduced noise.
• 14-pin connector for Lincoln wire feeders LF-72, LN-7, LN-8,
• Single-sided engine access for routine maintenance. Double LN-15, LN-25 and LN-742. Also compatible with the NA-3
hinged door located on the right side of the machine opens Control and LT-7 Tractor.
easily in tight surroundings.
• Two Vantage 500 units can be paralleled in the CC-Stick
• Large 25 gallon fuel tank provides run time for an extended day Mode to increase output.
– 13 hours of welding at 500A/40V/100% duty cycle output, or
31 to 38 hours at high idle. • Oil drain valve and tube to direct used engine oil away from the
base into a pan.
• Engine hour meter for scheduled maintenance.
• Standard stainless steel roof, side panels and engine-access
• Output at welding terminals controlled by electronic contactor. Can door deliver added protection, durability and corrosion-resist-
be switched to “Weld Terminals On” or to “Remotely Controlled”. ance. Eliminates need to replace these items due to paint
damage or rust.

Key Controls
1. Run/Stop Switch
6 7 8 9 10 11 12 2. Start Pushbutton
3. Welding Terminals Control Switch
4. Wire Feeder Voltmeter Polarity Switch
13 5. Weld Mode Selector Switch
6. Hour Meter
14
7. Fuel Level Gauge
5 8. Engine Temperature Gauge
4 15 9. Oil Pressure Gauge
3 10. Engine Protection Light
16 11. Engine Battery Charging Light
2 12. Engine Idler Switch
1 13. Output Control Dial
17 14. Digital Amps and Volts Output Meters
18 15. Arc Force & Inductance/Pinch Control Dial
19 16. Circuit Breakers
17. 120VAC GFCI Receptacles
23 18. 120/240 VAC Full-KVA 1-Phase Receptacle
19. 240 VAC Full-KVA 3-Phase Receptacle
22 20. Ground Stud
20
21. Covered Weld Output Terminals + and -
22. 14-Pin Wire Feeder Connector
23. 6-Pin Remote Control Connector

21

Vantage 500
[3] www.lincolnelectric.com
 A CLOSER LOOK

QUALITY AND RELIABILITY

• Printed circuit boards are environmentally-shielded using • Circuit breaker protection on the battery ignition system provides
Lincoln's engineered potting and protective frame trays. added component protection.
• Environmentally friendly engines. Both engines have a closed
breather system to keep the engine compartment and ground
clean. This system eliminates oil mist from collecting inside the
engine compartment, especially on surfaces that would lower
engine cooling efficiency.
• Self-bleeding engines simplify startup if your fuel tank runs dry.
• Simple wire harnessing keeps connections to a minimum for
• Cummins engine camshaft is gear-driven. No timing belt
greater reliability. Lead and harness strain reliefs on all control
maintenance.
connections help ensure trouble-free performance.
• Approved by the Canadian Standards Association.
• Engine Protection System includes automatic shutdown for low
oil pressure or high engine temperature. • Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• Indicator light turns on for low oil pressure, high engine tempera-
ture or (for Deutz engine) broken cooling blower belt. A second • Three-Year Lincoln Warranty on welder. (Engine is warranted
indicator light turns on if the engine battery charging system separately by the manufacturer.)
malfunctions.

MACHINE SPECIFICATIONS

Dimensions (5)
Product Ordering CC/Pipe-Rated DC Output CV Rated Output HxWxL Weight
Name Information Description Current/Voltage/Duty Cycle Current/Voltage/Duty Cycle AC Power (2) (3) inches (mm) lbs. (kg)

Vantage® 500 K2405-1 500 Amp DC Welder with DC Constant Current DC Constant Voltage(1) 12,000 Watts 50.9 x 31.5 x 63.1 in 1532 lbs.
(Deutz®) Digital Meter Output 500A/40V/100% 500A/40V/100% 60 Hz (1293 x 800 x 1603mm) (695 kg)
Display & Engine Gauges 550A/36V/60% 550A/36V/60%
K2406-1 575A/35V/50% 575A/35V/50% Two 120V 50.8 x 31.5 x 63.1 in 1443 lbs.
(Cummins®) 12,000 Watts 30-575 Amps Duplex GFCI (1290 x 800 x 1603mm) (655 kg)
AC Power 14-40V Receptacles
1-Phase DC Pipe Current Single Dial 20A Per Duplex
300A/32V/100% Continuous Control 40A Total (4)
40-300A
20,000 Watts Wire Feeder Power Full KVA
AC Power Touch-Start TIG Range 120V/60Hz Receptacle
3-Phase 250A/30V/100% 42V/60Hz 50A@240V
20-250 Amps 50A@120V Each
Branch Circuit(4)
Single Dial
Continuous Control
60V DC Max OCV
@1895 RPM Deutz
@1890 RPM Cummins

(1) DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.
(2) When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.
(3) 120V will operate either 60Hz or 50/60 Hz power tools, lights, etc.
(4) Circuits cannot be wired in parallel to operate the same device.
(5) Height is to top of exhaust elbow; 42 in. (1067mm) case top height.

ENGINE SPECIFICATIONS

Engine Horsepower & Operating Fuel

Model Description Displacement Capacities Speeds Consumption

Deutz F4L2011(6) 4 Cylinder, 4 Cycle 48 HP@1800 RPM FUEL: 500A Load 2.0 Gal/Hr
Oil/Air-Cooled Diesel Engine 25 Gals (95 Ltrs) 1800 RPM 7.5 Ltr/Hr
12V Electric Start 190 cu in High Idle 0.6 Gal/Hr
Two-Stage Dry Type Air Cleaner, (3.1 ltrs) OIL: 1895 RPM 2.4 Ltr/Hr
Fuel Filter with Water Separator 10.0 Qts (9.5 Ltrs) Low Idle 0.5 Gal/Hr
EPA Tier II 1425 RPM 1.8 Ltr/Hr

Cummins B3.3(7) 4 Cylinder, 4 Cycle 54 HP@1890 RPM FUEL: 500A Load 2.0 Gal/Hr
Water-Cooled Diesel Engine, 25 gals (95 ltrs) 1890 RPM 7.4 Ltr/Hr
12V Electric Start, Electronic Governor 199 cu in OIL: High Idle 0.7 Gal/Hr
Two-Stage Dry Type Air Cleaner, (3.3 ltrs) 8.0 qts (7.6 ltrs) 1890 RPM 2.5 Ltr/Hr
Fuel Filter with Water Separator COOLANT: Low Idle 0.4 Gal/Hr
EPA Tier II 8.0 qts (7.6 ltrs) 1425 RPM 1.6 Ltr/Hr
(6) Deutz warranty is 2 years/2,000 hours for all components, 3 years/3,000 hours for major components.
Approved for underground mining with purchase of MSHA (30 CFR Part 7) certificate from Deutz.
(7) Cummins warranty is 3 years/3,000 hours for all components, 3 years/10,000 hours for major components.

Vantage 500
[4] www.lincolnelectric.com
A CLOSER LOOK

SYSTEM SELECTION
One-Pak™ Welding Packages
Order a Lincoln One-Pak™ and get everything you need to
complete a welding package - all with one order number.
(Packages require assembly.)

Each UNASSEMBLED Package Contains:

• Vantage 500 (See Order Number Below)
• Medium Welder Trailer (K953-1)
• Hitch (See Order Number Below)
• Fender and Light Kit (K959-1)
• Cable Rack (K965-1)
• Electrode Cable 3/0, 100 ft. (30.5m) (L-3/0-100-11)
• Work Cable 3/0, 100 ft. (30.5m) (L-3/0-100-11-11) Vantage 500 K953-1 Medium Welder Trailer
• 400A Electrode Holder (K909-8)
• 500A Work Clamp (K910-2)

Order:
K2288-1 One-Pak Vantage 500, Deutz, K958-1 Ball Hitch
K2288-2 One-Pak Vantage 500, Deutz, K958-2 Lunette Eye Hitch
K2289-1 One-Pak Vantage 500, Cummins, K958-1 Ball Hitch
K2289-2 One-Pak Vantage 500, Cummins, K958-2 Lunette Eye Hitch K958-1 2” Ball Hitch K958-2 Lunette Eye Hitch

Ready-Pak™ Welding Packages

Order a Lincoln Ready-Pak™ and get an assembled welding package.

Each COMPLETELY ASSEMBLED Package Contains:

• Vantage 500 (See Order Number Below)
• Medium Welder Trailer (K953-1)
• Hitch (See order number below)
• Fender and Light Kit (K959-1)
• Cable Rack (K965-1)
• Electrode Cable 3/0, 100 ft. (30.5m) (L-3/0-100-11)
• Work Cable 3/0, 100 ft. (30.5m) (L-3/0-100-11-11)
• 400A Electrode Holder (K909-8)
• 500A Work Clamp (K910-2)
• 1/8” 7018 Excalibur™ - Six 10 lb. Easy Open Cans (ED028482)

Order:
K2290-1 Ready-Pak Vantage 500, Deutz, K958-1 Ball Hitch
K2290-2 Ready-Pak Vantage 500, Deutz,
K958-2 Lunette Eye Hitch Completely Assembled Ready-Pak
K2291-1 Ready-Pak Vantage 500, Cummins, K958-1 Ball Hitch
K2291-2 Ready-Pak Vantage 500, Cummins,
K958-2 Lunette Eye Hitch

Vantage 500
[5] www.lincolnelectric.com
RECOMMENDED OPTIONS

GENERAL OPTIONS GENERAL OPTIONS CONT.

Power Plug Kit (20A) Service Indicator Kit —
Provides four 120V plugs rated at 20 Cummins Engine
120V amps each, and one dual voltage, full Provides a GO/NO-GO visual
KVA plug rated at120/240V, 50 amps. indication of air cleaner element use-
120V plug may not be compatible with ful service life. Filter service based on
NEMA common household receptacles. restriction readings allows the longest
Order K802N life possible from the filter and best
engine protection.
Power Plug Kit (15A) Order K1858-1
Provides four 120V plugs rated
at 15 amps each, and one dual volt- Control Panel Cover Kit
120V age, full KVA plug rated at 120/240V, Clear Plexiglass cover to protect control
50 amps. 120V plug is compatible panel from dirt and debris, and to visu-
with NEMA common household ally monitor machine operation.
receptacles. Lockable to deter vandalism.
Order K802R Order K2356-1

Full-KVA Power Plug Lockable Fuel Cap/Flash

One dual voltage plug rated at Arrestor Kit
120/240V, 50 amps. NEMA 14-50R. For use in locations where flash
Order T12153-9 arrestor safety is required. Lockable
fuel cap prevents tampering with fuel.
Medium Welder Trailer Green cap color provides a visual
For heavy-duty road, off-road, plant reminder to use diesel when refueling.
and yard applications. Includes Order K2340-1
wheeled jack, safety chains, 14”
STICK OPTIONS
wheels, and large rear bumper. Stiff
3/16” steel frame, E-Coated and Accessory Kit
powder painted for rust & corrosion Includes 35 ft. (10.7m) 2/0 electrode
resistance. Low sway suspension cable with lug, 30 ft. (9.1m) 2/0 work
gives outstanding stability with man- cable with lugs, headshield, filter
ageable tongue weight. E-Z Lube™ plate, cover plate, work clamp and
Axle-pack wheel bearings with a electrode holder. 400 amp capacity.
grease gun. 57” max. width for stabili- Order K704
ty with easy tracking.
Remote Output Control
Order K953-1 Trailer
Consists of a control box with choice
K958-1 2” Ball Hitch
of two cable lengths. Permits remote
K958-2 Lunette Eye Hitch
adjustment of output.
K959-1 Fender & Light Kit
Order K857 for 25 ft. (7.6m)
K965-1 Cable Rack
K857-1 for 100 ft. (30.5m)
Four-Wheeled Steerable
TIG OPTIONS
Yard Trailer
For in plant and yard towing. Includes Pro-Torch® PTA-26V TIG Torch
lunette eye towbar. Air-cooled 200 amp torch (2 piece)
Order K767-2 Trailer equipped with valve for gas flow con-
K958-1 2”ball hitch (optional) trol. 25 ft. (7.6m) length.
Order K1783-9
Ether Start Kit
Magnum Parts Kit for PTA-26V TIG
Provides maximum cold weather
Torch
starting assistance for frequent start-
Magnum Parts Kit provides all the
ing below 10°F (-12°C). Required ether
torch accessories you need to start
tank is not provided with kit.
welding. Parts kit provides collets,
Order K887-1
collet bodies, a back cap, alumina
nozzles and tungstens in a variety of
Spark Arrester Kit
sizes, all packaged in an easy to carry
Easily mounts to standard muffler.
reclosable sack.
Order K899-1 for Deutz Engine
Order KP509
(K1847-1 Shown) Order K1847-1 for Cummins Engine

Vantage 500
[6] www.lincolnelectric.com
RECOMMENDED OPTIONS

TIG OPTIONS CONT. WIRE FEEDER OPTIONS CONT.

Foot Amptrol™ Drive Roll and Guide Tube Kit
Provides 25 ft. (7.6m) of remote (for LN-25)
Output control for TIG welding. (6 pin For .068-3/32” (1.8-2.4mm) cored or
plug connection). solid steel wire.
Order K870 Order KP653-3/32

Hand AmptrolTM Drive Roll and Wire Guide Kit

Provides 25 ft. (7.6m) of remote cur- (for LN-15)
rent control for TIG welding. (6 pin For 1/16” (1.6mm) cored wire.
plug connection). Velcro straps Order KP1697-1/16C
secure torch.
Order K963-3 (one size fits all Gun Receiver Bushing
Pro-Torch TIG Torches) For LN-15 and K126-2.
Order K1500-1
Precision TIG 185 Ready-Pak
For AC TIG Welding with square wave Magnum® 300 MIG Gun
performance use the AC generator of For .035-.045” (0.9-1.2mm) gas-shield-
the Engine-Driven Welder to supply ed wire with 15 ft. (4.5,) cable.
the power. Easy setup. Includes LN-25 Order:
torch, foot amptrol, gas regulator and K1802-1 (Includes Connector Kit)
hose. Requires the K1816-1 Full KVA LN-15 Order:
adapter kit. K470-2 Magnum 300 MIG Gun
Order K2347-1 K466-10 Connector Kit
Invertec® V205-T AC/DC
Drive Roll and Guide Tube Kit
One-Pak™ Package
(for LN-25)
For AC TIG welding with square wave
For .035-.040” (0.9-1.0mm) solid
performance, use the AC generator of
steel wire.
the engine-driven welder to supply the
Order KP653-035S
power. Easy setup. Includes torch,
parts kit, regulator and hose kit, Twist-
Drive Roll and Wire Guide Kit
Mate™ torch adapter, work cable with
(for LN-15)
Twist-Mate end and foot Amptrol®.
For .035 (0.9mm) solid steel wire.
Order K2350-1
Order KP1696-035S
Full - KVA Adapter Kit
Provides convenient connection of Magnum SG Spool Gun
Lincoln Electric equipment having a Hand held semiautomatic wire feeder.
240V AC 1-phase plug (NEMA 6-50R) Requires SG Control Module and
to the full-KVA receptacle on engine- Input Cable.
driven welders. Order K487-25
Order K1816-1
SG Control Module
The interface between the power
WIRE FEEDER OPTIONS source and the spool gun. Provides
LN-25 Wire Feeder control of the wire speed and gas
flow. For use with a spool gun.
Portable CC/CV unit for flux-cored
Order K488
and MIG welding. Includes Gas
Solenoid & Internal Contactor. Input Cable
Order K449 (For SG Control Module)
For Lincoln engine power sources
LN-15 Across-The-Arc Wire Feeder with 14-pin MS-type connection, sep-
Portable, lightweight, compact CC/CV arate 115V NEMA receptacles and
unit for flux-cored and MIG welding. output stud connections.
Includes gas solenoid, adjustable flow Order K691-10
meter and internal contactor. For 10-
15 lb. (4.5 - 6.8kg) spools. PLASMA CUTTING
Order K1870-1
Pro-Cut® 80
Magnum® 350 Innershield Gun Cuts metal using the 3-phase AC genera-
(for LN-25, LN-15) tor output from the engine-driven welder.
For self-shielded wire with 15 ft. Order K1581-1
(4.5m) cable. For .062-3/32” (1.6-
2.4mm) wire.
Order K126-2

Vantage 500
[7] www.lincolnelectric.com
 VANTAGE 500 ORDER FORM

PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE

VANTAGE 500 (Deutz Engine) K2405-1

VANTAGE 500 (Cummins Engine) K2406-1

RECOMMENDED GENERAL OPTIONS

Power Plug Kit - 20 amp K802N
Power Plug Kit - 15 amp K802R
Full-KVA Power Plug T12153-9
Medium Welder Trailer K953-1
- 2” Ball Hitch K958-1
- Lunette Eye Hitch K958-2
- Fender and Light Kit K959-1
- Cable Rack K965-1
Four-Wheeled Steerable Yard Trailer (with Lunette Eye Towbar) K767-2
- 2” Ball Hitch (optional) K958-1
Ether Start Kit K887-1
Spark Arrestor Kit
- Deutz Engine K899-1
- Cummins Engine K1847-1
Service Indicator Kit - Cummins Engine K1858-1
Control Panel Cover Kit K2356-1
Lockable Fuel Cap/Flash Arrestor Kit K2340-1

RECOMMENDED STICK OPTIONS

Accessory Kit K704
Remote Output Control
- 25 ft. (7.6m) K857
- 100 ft. (30.5m) K857-1

RECOMMENDED TIG OPTIONS

Pro-Torch® PTA-26V TIG Torch K1783-9
Parts Kit KP509
Foot Amptrol K870
Hand Amptrol (All Pro-Torch TIG torches) K963-3
Precision TIG 185 Ready-Pak (for AC TIG Welding) K2347-1
Invertec V205-T AC/DC One-Pak™ Package (for AC TIG welding) K2350-1
- Full KVA Adapter Kit (required for K2347-1 and K2350-1) K1816-1

RECOMMENDED WIRE FEEDER OPTIONS

LN-25 Wire Feeder with Contactor, Solenoid K449
LN-15 Across-The-Arc Wire Feeder K1870-1
Magnum 350 Innershield Gun K126-2
Drive Roll and Guide Tube Kit (for LN-25) KP653-3/32
Drive Roll and Wire Guide Kit (for LN-15) KP1697-1/16C
Gun Receiver Bushing (LN-15 and K126-2) K1500-1
Magnum 300® MIG Gun (for LN-25) (includes Connector Kit) K1802-1
Magnum 300 MIG Gun (for LN-15) K470-2
-Connector Kit (LN-15) K466-10
Drive Roll and Guide Tube Kit (for LN-25) KP653-035S
Drive Roll and Wire Guide Kit (for LN-15) KP1696-035S
Magnum SG Spool Gun K487-25
-SG Control Module (required) K488
-Input Cable (required) K691-10

RECOMMENDED PLASMA CUTTING OPTIONS

Pro-Cut 80 K1581-1
TOTAL:

C U S T O M E R A S S I S TA N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our
customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based
on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or
advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of prac-
tical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice
create, expand or alter any warranty with respect to the sale of our products.

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the cus-
tomer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com