Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500

Pipe Fittings
NPT Threaded,
Ductile Iron
General Material:
Series 800 and California Fittings:
Standards of the National Fire Protec­
tion Association, and/or the standards
Description Ductile Iron
Figure 719 Plug:
of any other Authorities Having Juris­
diction. Materials found by TFBP to be
Cast Iron defective shall be either repaired or re­
The Tyco® Series 800 Threaded Pipe placed, at TFBP’s sole option. TFBP
Fittings and California Tees & Elbows Pipe Thread:
NPT per ANSI B1.20.1 neither assumes, nor authorizes any
are manufactured from ductile iron. person to assume for it, any other ob­
They are stronger and more corrosion
resistant than cast iron fittings. The
additional strength is provided by the
Installation ligation in connection with the sale of
products or parts of products. TFBP
shall not be responsible for sprinkler
ductile properties and by adding mag­ Apply Teflon† tape or high quality pipe system design errors or inaccurate or
nesium while the iron is being poured joint compound on male pipe threads incomplete information supplied by
into the final cast shape. Although and tighten two to three turns beyond Buyer or Buyer’s repre­sentatives.
lighter than standard cast iron, the fit­ hand tight.
tings have an added advantage of be­ In no event shall TFBP be liable, in
ing less susceptible to cracking due to note contract, tort, strict liability or under
their added strength. Installers who have not used ductile any other legal theory, for incidental,
iron threaded fittings should be in- indirect, special or consequential dam­
The Series 800, California, and Figure ages, including but not limited to labor
structed that the fittings are stron- charges, regardless of whether TFBP
719 Threaded Pipe Fittings are a re­
ger than the pipe and overtightening was informed about the possibility of
designation for the Central Series 800,
the fitting can create leaks and cause such damages, and in no event shall
California, and Figure 719 Threaded
damage to pipe threads. In general, TFBP’s liability exceed an amount
Pipe Fittings. there is about one-half turn difference equal to the sales price.
between cast iron and ductile iron fit-
WARNINGS tings. Apply Teflon tape or high qual- The foregoing warranty is made in lieu
The Threaded Pipe Fittings described ity pipe joint compound on the male of any and all other warranties, ex­
herein must be installed and main- pipe threads and tighten two to three press or implied, including warranties
tained in compliance with this docu- turns beyond hand tight. If an auto- of merchantability and fitness for a
ment, as well as with the applicable matic make-on machine is being used, particular purpose.
standards of the National Fire Pro- please exercise caution in setting the
tection Association, in addition to the This limited warranty sets forth the ex­
machine to the proper parameters pri- clusive remedy for claims based on
standards of any other authorities hav- or to tightening fittings onto the male
ing jurisdiction. Failure to do so may failure of or defect in products, materi­
pipe threads. als or components, whether the claim
impair the performance of these is made in contract, tort, strict liability
devices.
The owner is responsible for maintain- Limited or any other legal theory.
This warranty will apply to the full ex­
ing their fire protection system and de-
vices in proper operating condition. Warranty tent permitted by law. The invalidity,
in whole or part, of any portion of this
The installing contractor or sprinkler warranty will not affect the remainder.
Products manufactured by Tyco Fire
manufacturer should be contacted & Building Products (TFBP) are war­
with any questions. ranted solely to the original Buyer for
ten (10) years against defects in mate­ Ordering
Technical rial and workmanship when paid for
and properly installed and maintained Procedure
Data under normal use and service. This
warranty will expire ten (10) years from When placing an order, indicate the
date of shipment by TFBP. No warran­ full product name. Please specify the
Approvals: ty is given for products or components quantity, figure number, wall thickness,
UL Listed and FM Approved manufactured by companies not af­ and size.
Maximum Working Pressure: filiated by ownership with TFBP or for
Series 800 and California Fittings: products and components which have
250 psi (17,2 bar) been subject to misuse, improper in­
Figure 719 Plug: stallation, corrosion, or which have not
250 psi (17,2 bar) been installed, maintained, modified or †
registered trademark of E. I. du Pont de
repaired in accordance with applicable Nemours and Company or its affiliates.

Page  of 10 JANUARY, 2008 TFP1710

Page  of 10 TFP1710

A C
A
B B B E
F
B A
A B
A D

Figure 811 Figure 813

90° ELBOW 45° ELBOW

Nominal Pipe B
Figure 811 Figure 813
Size

Approx. D Approx.
ANSI A B A B
Weight Part
C Weight Part
Inches Inches Inches Inches
A InchesA
Lbs. Number Lbs. Number
DN (mm) (mm) (mm) (mm)
(kg) (kg)
A B 0.38
1/2 1.13 0.56 0.24 0.88 B 0.22
86206 86780
DN15 (28,7) (14,2) (0,11) (22,4) (9,7) (0,09)
3/4 1.31 0.75 0.40 1.00 B 0.44 0.33
86205 A 86781
DN20 (33,3) (19,0) (0,18) (25,4) (11,2) (0,15)
1 1.50 0.81 0.64 1.13 0.81 0.48
86200 86280
DN25 (38,1) (20,6) (0,29) (28,7) (20,6) (0,21)
1-1/4 1.75 1.06 0.95 1.31 0.63 0.73
86201 86281
DN32 (44,5) (26,9) (0,43) (33,3) (16,0) (0,33)
1-1/2 1.94 1.19 1.24 1.44 0.69 0.93
86202 86282
DN40 (49,3) (30,2) (0,56) (36,6) (17,5) (0,42)
2 2.25 1.50 1.74 1.68 0.94 1.55
86203 86283
DN50 (57,1) (38,1) (0,79) (42,7) (23,9) (0,70)
2-1/2 2.69 1.56 3.28 1.94 1.00 2.70
86204 86782
DN65 (68,3) (39,6) (1,49) (49,3) (25,4) (1,22)

table 1
Nominal Dimensions Figures 811 & 813

A B

A B
B

A B
 B B E
F
TFP1710 B Page  of 10
A
A D

D
C A

Figure 812
90° REDUCING ELBOW

Nominal Pipe Figure 812

Size

Approx.
ANSI A B C D Weight Part
Inches Inches Inches Inches Inches Lbs. Number
DN (mm) (mm) (mm) (mm) (kg)
3/4 x 1/2 1.19 1.19 0.63 0.63 0.33
86342
DN20 x 15 (30,2) (30,2) (16,0) (16,0) (0,15)
1 x 1/2 1.25 1.38 0.56 0.81 0.44
86210
DN25 x 15 (31,8) (35,1) (14,2) (20,6) (0,20)
1 x 3/4 1.38 1.44 0.69 0.88 0.53
86211
DN25 x 20 (35,1) (36,6) (17,5) (22,4) (0,24)
1-1/4 x 1/2 1.31 1.50 0.63 0.94 0.64
86212
DN32 x 15 (33,3) (38,1) (16,0) (23,9) (0,29)
1-1/4 x 3/4 1.44 1.63 0.75 1.06 0.75
86213
DN32 x 20 (36,6) (41,4) (19,0) (26,9) (0,34)
1-1/4 x 1 1.56 1.68 0.88 1.00 0.77
86214
DN32 x 25 (39,6) (42,7) (22,4 (25,4) (0,35)
1-1/2 x 3/4 1.50 1.75 0.75 1.19 0.95
86221
DN40 xA20 (38,1) (44,4) (19,0) (30,2) (0,43)
1-1/2 x 1 B 1.63 1.81 0.88 1.13 0.99
86215
DN40 x 25 (41,4) (46,0) (22,4) (28,7) (0,45)
1-1/2
A x 1-1/4
B 1.81 1.88 1.13 1.19 1.14
86216
DN40 x 32 (46,0) (47,8) (28,7) (30,2) (0,52)
2 x 3/4 1.63 1.94 0.88 1.38 1.39
86217
DN50 x 20 (41,4) (49,3) (22,4) (35,1) (0,63)
2x1 1.75 2.06 2.00 1.31 1.58
86218
DN50 x 25 (44,4) (52,3) (50,8) (33,3) (0,72)
2 x 1-1/2 2.00 2.19 1.25 1.44 1.67
86220
DN50 x 40 (50,8) (55,6) (31,8) (36,6) (0,76)
2-1/2 x 2 2.38 2.63 1.25 1.88 3.01
86262
DN65 x 50 (60,5) (66,8) (31,8) (47,8) (1,36)
A

Table 2
A B Nominal Dimensions Figure 812
B

A B
 B A

Page  of 10 TFP1710
A

A A
A

D B
C
C
D B

Figure 817
Cross

Nominal Pipe Size Figure 817

Approx.
A B C D
ANSI Inches Weight Part
Inches Inches Inches Inches
DN Lbs. Number
(mm) (mm) (mm) (mm)
(kg)
1 1.50 1.50 0.81 0.81 0.97
86284
DN25 (38,1) (38,1) (20,6) (20,6) (0,44)
1-1/4 1.75 1.75 1.06 1.06 1.59
86285
DN32 (44,4) (44,4) (26,9) (27,0) (0,72)
1-1/2 1.94 1.94 1.19 1.19 1.89
86286
DN40 (49,3) (49,3) (30,2) (30,2) (0,86)
2 2.25 2.25 1.50 1.50 2.93
86287
DN50 (57,1) (57,1) (38,1) (38,1) (1,33)
1-1/4 x 1-1/4 x 1 x 1 1.69 1.56 1.00 0.88 1.25
86289
DN32 x 32 x 25 x 25 (42,9) (39,6) (25,4) (22,4) (0,56)
1-1/2 x 1-1/2 x 1 x 1 1.81 1.63 B1.06 A 1.94 1.48
86322
DN40 x 40 x 25 x 25 (46,0) (41,4) (26,9) (49,3) (0,71)
2x2x1x1 2.00 1.75 1.25 1.06 2.64
86291
DN50 x 50 x 25 x 25 (50,8) (44,4) (31,8) (26,9) (1,20)

table 3
Nominal Dimensions Figure 817

A
A
TFP1710 Page  of 10

A B
B
B A

A B

Figure 814 Figure 818

Iron Tee straight coupling

Nominal Pipe
Figure 814 Figure 818
Size

Approx. Approx.
A B A B
ANSI Inches Weight Part Weight Part
Inches Inches Inches Inches
DN Lbs. Number Lbs. Number
(mm) (mm) (mm) (mm)
(kg) (kg)
1/2 1.13 0.56 0.33 1.38 0.31 0.18
86340 72779
DN15 (28,7) (14,2) (0,15) (35,1) (7,9) (0,08)
3/4 1.31 0.75 0.50 1.63 0.56 0.26
86341 72778
DN20 (33,3) (19,0) (0,23) (41,4) (14,0) (0,11)
1 1.50 0.81 0.85 1.75 0.38 0.44
86230 72755
DN25 (38,1) (20,6) (0,38) (44,4) (9,7) (0,20)
1-1/4 1.75 1.06 1.30 2.00 0.56 0.54
86231 72754
DN32 (44,4) (26,9) (0,59) (50,8) (14,0) (0,24)
1-1/2 1.94 1.19 1.63 2.19 0.75 0.71
86232 72753
DN40 (49,3) (30,2) (0,74) (55,6) (19,0) (0,32)
2 2.25 1.50 2.63 2.63 1.13 1.15
86233A 72752
DN50 (57,1) (38,1) (1,19) (66,8) (28,7) (0,52)
2-1/2 2.69 1.56 4.55 3.00 0.75 2.29
86234 72758
DN65 (68,3) (39,6) (2,06) (76,2) (19,0) (1,04)

table 4
Nominal Dimensions Figures 814 & 818
 TFP1710 Page  of 10

B E
F

A D

Figure 815
Reducing tee
B

Nominal Pipe Size Figure 815

D
C A Approx.
A B C D E F
ANSI Inches Weight Part
Inches Inches Inches Inches Inches Inches
DN Lbs. Number
(mm) (mm) (mm) (mm) (mm) (mm)
(kg)
3/4 x 3/4 x 1/2 1.19 1.19 1.25 0.63 0.63 0.69 0.46
86235
DN20 x 20 x 15 (30,2) (30,2) (31,8) (16,0) (16,0) (17,5) (0,21)
3/4 x 3/4 x 1 1.44 1.44 1.38 0.88 0.88 0.69 0.68
86755
DN20 x 20 x 25 (36,6) (36,6) (35,1) (22,4) (22,4) (17,5) (0,31)
1 x 1/2 x 1 1.50 1.38 1.50 0.81 0.81 0.81 0.70
86236
DN25 x 15 x 25 (38,1) (35,1) (38,1) (20,6) (20,6) (20,6) (0,32)
1 x 3/4 x 1/2 1.25 1.19 1.38 0.56 0.63 0.81 0.63
86756
DN25 x 20 x 15 (31,8) (30,2) (35,1) (14,2) (16,0) (20,6) (0,28)
1 x 3/4 x 3/4 1.38 1.31 1.44 0.69 0.75 0.88 0.68
86757
DN25 x 20 x 20 (35,1) (33,3) (36,6) (17,5) (19,0) (22,4) (0,31)
1 x 3/4 x 1 1.50 1.44 1.50 0.81 0.88 0.81 0.77
86237
DN25 x 20 x 25 (38,1) (36,6) (38,1) (20,6) (22,4) (20,6) (0,35)
1 x 1 x 1/2 1.25 1.25 1.38 0.56 0.56 0.81 0.66
86238
DN25 x 25 x 15 (31,8) (31,8) (35,1) (14,3) (14,3) (20,6) (0,30)
1 x 1 x 3/4 1.38 1.38 1.44 0.69 0.69 0.88 0.73
86239
DN25 x 25 x 20 (35,1) (35,1) (36,6) (17,5) (17,5) (22,4) (0,33)
1 x 1 x 1-1/4 1.69 1.69 1.56 1.00 1.00 0.88 0.97
86240
DN25 x 25 x 32 (42,9) (42,9) (39,6) (25,4) (25,4) (22,4) (0,44)
1 x 1 x 1-1/2 1.81 1.81 1.63 1.13 1.13 0.88 1.14
86241
DN25 x 25 x 40 (46,0) (46,0) (41,4) (28,6) (28,6) (22,4) (0,52)
1-1/4 x 1 x 1/2 1.94 1.25 1.56 0.63 0.56 1.00 0.81
86242
DN32 x 25 x 15 (49,2) (31,8) (39,6) (15,9) (14,3) (25,4) (0,37)
1-1/4 x 1 x 3/4 1.44 1.38 1.62 0.75 0.69 1.06 0.90
86243
DN32 x 25 x 20 (36,6) (35,1) (41,2) (19,0) (17,5) (27,0) (0,41)
1-1/4 x 1 x 1 1.56 1.50 1.69 0.88 0.81 1.00 1.03
86244
DN32 x 25 x 25 (39,6) (38,1) (42,9) (22,4) (20,6) (25,4) (0,47)
1-1/4 x 1 x 1-1/4 1.75 1.69 1.75 1.06 1.00 1.06 1.10
86245
DN32 x 25 x 32 (44,4) (42,9) (44,4) (27,0) (25,4) (27,0) (0,50)
1-1/4 x 1 x 1-1/2 1.88 1.81 1.81 1.19 1.13 1.06 1.43
86246
DN32 x 25 x 40 (47,6) (46,0) (46,0) (30,1) (28,6) (27,0) (0,65)
1-1/4 x 1-1/4 x 1/2 1.38 1.38 1.56 0.69 0.69 1.00 0.87
86247
DN32 x 32 x 15 (35,1) (35,1) (39,6) (17,5) (17,5) (25,4) (0,39)
1-1/4 x 1-1/4 x 3/4 1.44 1.44 1.63 0.75 0.75 1.06 0.96
86248
DN32 x 32 x 20 (36,6) (36,6) (41,4) (19,0) (19,0) (27,0) (0,43)
1-1/4 x 1-1/4 x 1 1.56 1.56 1.69 0.88 0.88 1.00 1.10
86249
DN32 x 32 x 25 (39,6) (39,6) (42,9) (22,4) (22,4) (25,4) (0,50)
1-1/4 x 1-1/4 x 1-1/2 1.88 1.88 1.81 1.81 1.81 1.06 1.50
86250
DN32 x 32 x 40 (47,6) (47,6) (46,0) (46,0) (46,0) (27,0) (0,68)
1-1/4 x 1-1/4 x 2 2.13 2.13 2.00 1.44 1.44 1.13 2.00
86251
DN32 x 32 x 50 (54,1) (54,1) (50,8) (36,6) (36,6) (28,6) (0,91)
1-1/2 x 1 x 1/2 1.44 1.31 1.69 0.69 0.63 1.13 0.97
86252
DN40 x 25 x 15 (36,6) (33,3) (42,9) (17,5) (15,9) (28,6) (0,44)
1-1/2 x 1 x 3/4 1.50 1.38 1.75 0.75 0.69 1.19 1.14
86253
DN40 x 25 x 20 (38,1) (35,1) (44,4) (19,0) (17,5) (30,2) (0,52)
1-1/2 x 1 x 1 1.63 1.50 1.81 0.88 0.81 1.13 1.14
86254
DN40 x 25 x 25 (41,4) (38,1) (46,0) (22,4) (20,6) (28,7) (0,52)
1-1/2 x 1 x 1-1/2 1.94 1.81 1.94 1.19 1.13 1.19 1.52
86255
DN40 x 25 x 40 (49,3) (46,0) (49,2) (30,2) (28,6) (30,2) (0,69)

table 5 (1 of 2)
Nominal Dimensions Figure 815
 Page  of 10 TFP1710

B E
F

A D

Figure 815
Reducing tee
B

Nominal Pipe Size Figure 815

D
C A Approx.
A B C D E F
ANSI Inches Weight Part
Inches Inches Inches Inches Inches Inches
DN Lbs. Number
(mm) (mm) (mm) (mm) (mm) (mm)
(kg)
1-1/2 x 1-1/4 x 1/2 1.44 1.31 1.69 0.69 0.63 1.13 1.03
86257
DN40 x 32 x 15 (36,6) (33,3) (42,9) (17,5) (16,0) (28,7) (0,47)
1-1/2 x 1-1/4 x 3/4 1.50 1.44 1.75 0.75 0.75 1.19 1.10
86258
DN40 x 32 x 20 (38,1) (36,6) (44,5) (19,0) (19,0) (30,1) (0,50)
1-1/2 x 1-1/4 x 1 1.63 1.56 1.81 0.88 0.88 1.13 1.31
86259
DN40 x 32 x 25 (41,4) (39,7) (46,0) (22,4) (22,4) (28,7) (0,59)
1-1/2 x 1-1/4 x 2 2.19 2.13 2.00 1.44 1.44 1.25 1.94
86260
DN40 x 32 x 50 (55,6) (54,1) (50,8) (36,6) (36,6) (57,1) (0,88)
1-1/2 x 1-1/2 x 1/2 1.44 1.44 1.69 0.69 0.69 1.13 1.14
86261
DN40 x 40 x 15 (36,6) (36,6) (42,9) (17,5) (17,5) (28,7) (0,52)
1-1/2 x 1-1/2 x 3/4 1.50 1.50 1.75 0.75 0.75 1.19 1.23
86262
DN40 x 40 x 20 (38,1) (38,1) (44,4) (19,0) (19,0) (30,1) (0,56)
1-1/2 x 1-1/2 x 1 1.63 1.63 1.81 0.88 0.88 1.13 1.38
86263
DN40 x 40 x 25 (41,2) (41,2) (46,0) (22,4) (22,4) (28,7) (0,62)
1-1/2 x 1-1/2 x 1-1/4 1.81 1.81 1.88 1.06 1.06 1.19 1.50
86264
DN40 x 40 x 32 (46,0) (46,0) (47,6) (27,0) (27,0) (30,1) (0,68)
1-1/2 x 1-1/2 x 2 2.19 2.19 2.00 1.44 1.44 1.25 2.00
86265
DN40 x 40 x 50 (55,5) (55,5) (50,8) (36,6) (36,6) (31,7) (0,91)
2x1x2 2.25 2.00 2.25 1.50 1.31 1.50 2.18
86266
DN50 x 25 x 50 (57,2) (50,8) (57,2) (38,1) (33,3) (38,1) (0,99)
2 x 1-1/4 x 2 2.25 2.13 2.25 1.50 1.44 1.50 2.31
86267
DN50 x 32 x 50 (57,2) (54,1) (57,2) (38,1) (36,6) (38,1) (1,05)
2 x 1-1/2 x 1/2 1.50 1.44 1.88 0.75 0.69 1.31 1.50
86268
DN50 x 40 x 15 (38,1) (36,6) (47,8) (19,0) (17,5) (33,3) (0,68)
2 x 1-1/2 x 3/4 1.63 1.50 1.94 0.88 0.75 1.38 1.61
86269
DN50 x 40 x 20 (41,4) (38,1) (49,3) (22,4) (19,0) (35,0) (0,73)
2 x 1-1/2 x 1 1.75 1.63 2.00 1.00 0.88 1.31 1.65
86270
DN50 x 40 x 25 (44,5) (41,4) (50,8) (25,4) (22,4) (33,3) (0,75)
2 x 1-1/2 x 1-1/2 2.06 1.94 2.19 1.31 1.19 1.44 2.03
86272
DN50 x 40 x 40 (52,4) (49,2) (55,5) (33,3) (30,2) (36,6) (0,92)
2 x 1-1/2 x 2 2.25 2.19 2.50 1.50 1.44 1.50 2.37
86273
DN50 x 40 x 50 (57,1) (55,5) (63,5) (38,1) (36,6) (38,1) (1,07)
2 x 2 x 1/2 1.50 1.50 1.88 0.75 0.75 1.31 1.50
86222
DN50 x 50 x 15 (38,1) (38,1) (47,8) (19,0) (19,0) (33,3) (0,68)
2 x 2 x 3/4 1.63 1.63 1.94 0.88 0.88 1.38 1.67
86223
DN50 x 50 x 20 (41,4) (41,4) (49,3) (22,4) (22,4) (35,0) (0,76)
2x2x1 1.75 1.75 2.00 1.00 1.00 1.31 1.91
86224
DN50 x 50 x 25 (44,5) (44,5) (50,8) (25,4) (25,4) (33,3) (0,86)
2 x 2 x 1-1/4 1.88 1.88 2.13 1.13 1.13 1.44 2.05
86225
DN50 x 50 x 32 (47,8) (47,8) (54,1) (28,7) (28,7) (36,6) (0,93)
2 x 2 x 1-1/2 2.00 2.00 2.19 1.25 1.25 1.50 2.11
86226
DN50 x 50 x 40 (50,8) (50,8) (55,6) (31,8) (31,8) (38,1) (0,96)
2 x 2 x 2-1/2 2.63 2.63 2.38 1.75 1.88 1.44 3.67
86227
DN50 x 50 x 65 (66,8) (66,8) (60,5) (44,5) (47,8) (36,6) (1,66)
2-1/2 x 2 x 3/4 1.75 1.63 2.31 0.63 0.88 1.75 2.22
86274
DN65 x 50 x 20 (44,5) (41,4) (58,7) (15,9) (22,4) (44,5) (1,01)

table 5 (2 of 2)
Nominal Dimensions Figure 815
 Page  of 10 TFP1710

A
B A A
A
A

Figure 820 Figure 830 Figure 719

cap Brass seat union plug

Nominal Pipe
Figure 820 Figure 830 Figure 719
Size

Approx. Approx. Approx.

ANSI A A B A
Weight Part Weight Part Weight Part
Inches Inches Inches Inches Inches
Lbs. Number Lbs. Number Lbs. Number
DN (mm) (mm) (mm) (mm)
(kg) (kg) (kg)
1/2 0.88 0.15 1.88 0.81 0.47 0.94 0.10
72776 86207 86292
DN15 (22,4) (0,06) (47,8) (20,6) (0,21) (23,9) (0,04)
3/4 1.00 0.22 2.00 0.94 0.66 1.13 0.18
72777 86275 86293
DN20 (25,4) (0,10) (50,8) (23,9) (0,30) (28,7) (0,08)
1 1.18 0.33 2.19 0.81 1.08 1.25 0.28
72824 86276 86294
DN25 (30,0) (0,15) (55,6) (20,6) (0,49) (31,7) (0,13)
1-1/4 1.31 0.54 2.50 1.06 1.54 1.38 0.50
72756 86277 86295
DN32 (33,3) (0,24) (63,5) (26,9) (0,70) (35,1) (0,23)
1-1/2 1.38 0.68 2.63 1.19 2.03 1.44 0.70
72822 86278 86296
DN40 (35,1) (0,31) (66,8) (30,2) (0,92) (36,6) (0,32)
2 1.50 0.96 3.13 1.63 3.15 1.50 0.90
72823 86279 86297
DN50 (38,1) (0,43) (79,5) (41,4) (1,43) (38,1) (0,41)
A
2-1/2 1.75 1.80
72825 - - - - - - -
DN65 (44,5) (0,82)

table 6
Nominal Dimensions Figures 820, 830 & 719
 TFP1710 Page  of 10
A

A A
A

D B
C
C
D B A
B
A

Figure 825 Figure 827 Figure 816

extension piece Hex bushing reducing coupling

Nominal Pipe Figure 825 Figure 827 Figure 816

Size Extension Piece A Hex Bushing Reducing Coupling
A A
B Approx. Approx. Approx.
A A A B
ANSI Inches Weight Part Weight Part Weight Part
Inches Inches Inches Inches
DN Lbs. Number Lbs. Number Lbs. Number D
(mm) (mm) (mm) (mm) C
(kg) (kg) (kg)
B
C
1/2 x 1/2 1.50 0.20 D
72751 ‑ - - - - - -
DN15 x 15 (38,1) (0,09)
1/2 x 1/2 2.00 0.27
72980 ‑ - - - - - -
DN15 x 15 (50,8) (0,12)
3/4 x 3/4 1.50 0.22
72981 ‑ - - - - - -
DN20 x 20 (38,1) (0,10)
3/4 x 3/4 2.00 0.31
73982 ‑ - - - - - -
DN20 x 20 (50,8) (0,14)
3/4 x 1/2 1.75 0.69 0.38
- - - ‑ - - 86772
DN20 x 15 (43,2) (17,5) (0,17)
B A 1 x 1/2 1.06 0.22 1.69 0.50 0.38
- - - 72726 86228
DN25 x 15 (26,9) (0,10) (42,9) (12,7) (0,17)
1 x 3/4 1.06 0.18 1.75 0.50 0.53
- - - 72762 86229
DN25 x 20 (26,9) (0,08) (43,2) (12,7) (0,24)
1-1/4 x 1 1.19 0.31
‑ - - 72763 - - - -
DN32 x 25 (30,2) (0,14)
1-1/2 x 1 1.25 0.53
‑ - - 72757 - - - -
DN40 x 25 (31,7) (0,24)
1-1/2 x 1-1/4 1.25 0.35
‑ - - 72764 - - - -
DN40 x 32 (31,7) (0,10)
2x1 1.38 0.75
‑ - - 72759 - - - -
DN50 x 25 (35,1) (0,34)
2 x 1-1/4 1.38 0.69
‑ - - 72761 - - - - B
DN50 x 32 (35,1) (0,31)
2 x 1-1/2 1.38 0.62
‑ - - 72775 - - - -
DN50 x 40 (35,1) (0,28)

table 7
Nominal Dimensions Figure 825, 827 & 816

A
 Page 10 of 10 TFP1710

A A
B D B D

C C

California tees

Nominal Pipe
California Tees
Size

Approx.
ANSI A B C D
Weight Part
Inches Inches Inches Inches Inches
Lbs. Number
DN (mm) (mm) (mm) (mm)
(kg)
1 x 1/2 x 1 1.50 0.88 3.00 0.75 0.95
42000
DN25 x 15 x 25 (38,1) (22,4) (76,2) (19,1) (0,43)
1x1x1 1.50 0.75 3.00 0.75 0.95
42001
DN25 x 25 x 25 (38,1) (19,1) (76,2) (19,1) (0,43)

table 8
Nominal Dimensions california tees

C C

C
A B A B

Street Elbows

Nominal Pipe
Street Elbows
Size

Approx.
ANSI A B C
Weight Part
Inches Inches Inches Inches
Lbs. Number
DN (mm) (mm) (mm)
(kg)
1 x 1/2 1.50 0.75 3.00 0.70
42003
DN25 x 15 (38,1) (19,1) (76,2) (0,32)
1x1 1.50 0.75 3.00 0.90
42002
DN25 x 25 (38,1) (19,1) (76,2) (0,40)

table 9
Nominal Dimensions street elbows

© 2008 TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale Pennsylvania 19446