Pi
lo
t
8
Technical data S
Si tac Dev
gn
al kligh ices
Be ts
ac
on
s
Stacklights Signal beacons
Construction materials Features
• Lenses - transparent polycarbonate • Vandal-proof construction withstands every mechanical and natural challenge both
• Terminal elements – high impact black polyamide indoors and outdoors
• Bulbs • High protection rating IP65
BA 15d, max. 42mm, max 5W • Cap consists of high impact polycarbonate (up to 20J).
KLB24, 24V, 208mA • Bulb change can be accomplished in seconds through lamp holder with bayonet
KLB1, 115V, 45mA Function
KLB2, 230V, 22mA Signal beacons produce visible (blinking, flashing or permanent light) or audible
• Terminal element signals (buzzer, siren) via electrical signals. Signal beacons are approved according
Connecting element with sealing cover for tube mounting or surface mounting to EN 60598 / VDE 0711 T1.
• Permanent light Safety instructions
KL70-401★ - 12-240 VAC/VDC • Wiring must be installed by a qualified electrician.
• Turn off the power supply before connecting the signal beacon
• Blinking light • Only operate signal beacons when completely assembled.
KL70-302 - 24VAC/VDC, 100mA • Observe the correct nominal voltage.
KL70-312 - 115VAC/VDC, 20mA • The volume of signal element can cause damage to hearing when used at close
KL70-322 - 230VAC/VDC, 10mA quarters
• Flashing light Technical specifications
KL70-203 - 24VDC/125mA • Dimensions: 68mm x 96.5mm (diameter x height)
8
KL70-113 - 115VAC/20mA • Housing: PC/ABS-blend, high impact, black
KL70-123 - 230VAC/15mA • Cap: Polycarbonate, transparent; shock resistance 20J according to EN 50014
• LED Permanent light • Mounting: Drilled hole ø 37mm (PG 29)
KL70-305 - 24VAC/VDC, 60mA • Terminal: Screw, M3; Pull relief; Flex radial or axial laid; Contact - voltage proof
• LED Blinking light according to VDE
KL70-306 - 24VAC/VDC, 40mA Permanent light
• LED Rotating light • Operating voltage: 12 - 240V
KL70-307 - 24VAC/VDC, 70mA • Bulb socket: B15d, 10 W max.
• Bulb change: Bayonet
• Buzzer element • Current consumption: depends on bulb (bulb not included with assembly)
KB70-3001 - 85db, 24VAC/VDC, 25mA • Starting current: depends on bulb (bulb not included with assembly)
KB70-3101 - 85db, 115VAC/VDC, 25mA
KB70-1201 - 85db, 230VAC, 25mA LED Model
• Permanent light: 24 VAC/VDC; 115VAC; 230VAC
• Siren element • Blinking light: 24 VAC/VDC; blink frequency ca. 1 Hz
KS70-2002 - 108db, 24VDC, 100mA • Rotating light: 24 VAC/VDC; rotation frequency ca. 120 U/min
KS70-3004 - 100db, 24VAC/VDC, 80mA • Current consumption:
KS70-1104 - 100db, 115VAC, 40mA 24VDC: Permanent light, 60mA; Blinking light, 40mA; Rotating light, 70mA
KS70-1204 - 100db, 230VAC, 40mA 115VAC: 30mA
KS70-2004 - 100db, 24VDC, 80mA 230VAC: 30mA
Cleaning • Starting current: <500mA
Clean the product from the outside with a light, non-scouring cleaning agent. Flashing light
Never use abrasive or diluting agents and never use benzine. • Flash frequency: ca. 1 Hz
• Flash energy: 2W
• Operating voltage: 12VDC, 24VDC, 115VAC, 230VAC
• Current consumption:
12VDC: 200mA
24VDC: 125mA
115VAC: 20mA
230VAC: 15mA
• Starting current
24VDC: <0.5A
115VAC: <0.5A
230VAC: <0.25A
Bulbs
• 12V, 7W
• 24V, 7W
• 115V, 7W
• 230V, 7W
Low Voltage Products & Systems Discount schedule CD 8.105
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1000 - 11/03
