LST UDRD:;

RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:41:20
O&M #1866278
%%/*1879304599*/LST UDRD:;%%
RETCODE = 0 Execution succeeded.

List RNC-Oriented DRD Algorithm Parameters

------------------------------------------
Logical RNC ID = 655
Maximum Times of Inter-RAT Direct Retry = 2
Service Steering DRD Switch = OFF
Load balance DRD switch for DCH = OFF
Load balance DRD switch for HSDPA = ON
Load Balancing DRD Choice = UserNumber
Secondary Carrier Load Balancing Choice = USER_NUMBER
RRC Redirection Switch for Admission Failure = Allowed_To_Inter_RAT
Load balance DRD offset for DCH = 10
Load balance DRD offset for HSDPA = 10
Dl load balance DRD power remain threshold for DCH = 35
Dl load balance DRD power remain threshold for HSDPA = 100
Load balance DRD total power protect threshold = 30
Code Balancing DRD Switch = OFF
Delta of Code Occupancy = 7
Minimum SF Threshold for Code Balancing DRD = SF8
Code Occupancy Thres for Code Balancing DRD = 13
ReDirection target band indicator = DependOnNCell
Redirection Target UL Frequency Index = <NULL>
Redirection target uplink UARFCN = <NULL>
Redirection target downlink UARFCN = <NULL>
Uplink load balance DRD Switch for DC-HSDPA = OFF
Uplink load balance DRD Offset for DC-HSDPA = 10
Uplink load balance DRD remain threshold for DC-HSDPA = 25
Measurement-Based DRD Switch = OFF
Terminal Type Hierarchy Switch = OFF
HSPA+ Capability Switch = ON
Optimized Power Load Balance DRD Switch = OFF
Periodic DRD Target Cell Load Indicator = FALSE
UE Location-based Multiband DRD Switch = OFF
UE Loc-based Multiband DRD Service Type = RT::OFF
= NRT::ON
Edge User Path Loss Threshold = 133
Center User Path Loss Threshold = 98
UE Location-based Multiband DRD Load Margin Threshold = 30
HSDPA Load Balancing DRD Optimization Switch = OFF
Macro-micro Inter-Freq Redirection Switch = OFF
Downlink SF Thd for RRC DRD or Redirection Preadmission = 5
Uplink CE Thd for RRC DRD or Redirection Preadmission = 2
Power Threshold for RRC DRD or Redirection Preadmission = 2
Cell Service Steering DCH Preference Switch = ON
Cell Service Steering HSDPA Preference Switch = ON
HSPA Realtime Service Steering DRD Switch = OFF
Redirection Consider Bar Switch = OFF
BHO-Flag-based Secondary Carrier Select = OFF
UE Location-based Multi-Band DRD Switch in C2D = OFF
DRD OPT Switch Upon Resource Congestion = OFF
Load Judgement Switch for HSPA+ DRD = OFF
Load Offset for Multi-carrier HSPA+ DRD = 10
Multiband DRD Based on Virtual Grid Switch = OFF
 Virtual Grid Based DRD Success Rate Threshold = 90
(Number of results = 1)

--- END

SET
UDRD:LOGICRNCID=655,CONNECTFAILRRCREDIRSWITCH=Only_To_Inter_Frequency,LDBDRDOFFSETH
SDPA=1,RRCREDIRCONSIDERBARSWITCH=ON,RESCONGDRDOPTSWITCH=ON;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:43:14
O&M #1866293
%%/*1879304600*/SET UDRD:
LOGICRNCID=655,CONNECTFAILRRCREDIRSWITCH=Only_To_Inter_Frequency,LDBDRDOFFSETHSDPA=
1,RRCREDIRCONSIDERBARSWITCH=ON,RESCONGDRDOPTSWITCH=ON;%%
RETCODE = 0 Execution succeeded.

--- END

LST UDRD:;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:43:21
O&M #1866295
%%/*1879304601*/LST UDRD:;%%
RETCODE = 0 Execution succeeded.

List RNC-Oriented DRD Algorithm Parameters

------------------------------------------
Logical RNC ID = 655
Maximum Times of Inter-RAT Direct Retry = 2
Service Steering DRD Switch = OFF
Load balance DRD switch for DCH = OFF
Load balance DRD switch for HSDPA = ON
Load Balancing DRD Choice = UserNumber
Secondary Carrier Load Balancing Choice = USER_NUMBER
RRC Redirection Switch for Admission Failure = Only_To_Inter_Frequency
Load balance DRD offset for DCH = 10
Load balance DRD offset for HSDPA = 1
Dl load balance DRD power remain threshold for DCH = 35
Dl load balance DRD power remain threshold for HSDPA = 100
Load balance DRD total power protect threshold = 30
Code Balancing DRD Switch = OFF
Delta of Code Occupancy = 7
Minimum SF Threshold for Code Balancing DRD = SF8
Code Occupancy Thres for Code Balancing DRD = 13
ReDirection target band indicator = DependOnNCell
Redirection Target UL Frequency Index = <NULL>
Redirection target uplink UARFCN = <NULL>
Redirection target downlink UARFCN = <NULL>
Uplink load balance DRD Switch for DC-HSDPA = OFF
Uplink load balance DRD Offset for DC-HSDPA = 10
Uplink load balance DRD remain threshold for DC-HSDPA = 25
Measurement-Based DRD Switch = OFF
Terminal Type Hierarchy Switch = OFF
HSPA+ Capability Switch = ON
Optimized Power Load Balance DRD Switch = OFF
Periodic DRD Target Cell Load Indicator = FALSE
UE Location-based Multiband DRD Switch = OFF
UE Loc-based Multiband DRD Service Type = RT::OFF
 = NRT::ON
Edge User Path Loss Threshold = 133
Center User Path Loss Threshold = 98
UE Location-based Multiband DRD Load Margin Threshold = 30
HSDPA Load Balancing DRD Optimization Switch = OFF
Macro-micro Inter-Freq Redirection Switch = OFF
Downlink SF Thd for RRC DRD or Redirection Preadmission = 5
Uplink CE Thd for RRC DRD or Redirection Preadmission = 2
Power Threshold for RRC DRD or Redirection Preadmission = 2
Cell Service Steering DCH Preference Switch = ON
Cell Service Steering HSDPA Preference Switch = ON
HSPA Realtime Service Steering DRD Switch = OFF
Redirection Consider Bar Switch = ON
BHO-Flag-based Secondary Carrier Select = OFF
UE Location-based Multi-Band DRD Switch in C2D = OFF
DRD OPT Switch Upon Resource Congestion = ON
Load Judgement Switch for HSPA+ DRD = OFF
Load Offset for Multi-carrier HSPA+ DRD = 10
Multiband DRD Based on Virtual Grid Switch = OFF
Virtual Grid Based DRD Success Rate Threshold = 90
(Number of results = 1)

--- END

LST UNBMPARA:;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:45:26
O&M #1866311
%%/*1879304602*/LST UNBMPARA:;%%
RETCODE = 0 Execution succeeded.

List Algorithm Parameters Related to NodeB Configuration and Maintenance

------------------------------------------------------------------------
Logical RNC ID = 655
Reliability Switch = RELIABILITY_CELL_SELFCURE_SWITCH::ON
= CELL_SIB_NOT_UPD_NCELL_CHG_SWITCH::OFF
= DPDCH_LOAD_ALG_SWITCH::OFF
= SI_VALUETAG_UPDATE_SWITCH::OFF
= DLSFRSRC_SELFCURE_SWITCH::ON
= NUMERICRSRC_SELFCURE_SWITCH::ON
= RELIABILITY_RRC_RETRANS_SWITCH::ON
= RELIABILITY_CELLUPT_FC_ENH_SWITCH::OFF
= DB_AUDIT_SWITCH::ON
= NODEB_UNAVAILABLE_ALM_NOT_RPT_SWITCH::OFF
= RELIABILITY_CELL_BROKEN_FC_ENH_SWITCH::OFF
= VALUE_TAG_PERIOD_UPT_SWITCH::ON
= CELLUPT_FC_CPU_STAT_PERIOD_CTRL_SWITCH::OFF
= MULTI_CARRIER_CELL_ALARM_OPT_SWITCH::OFF
= RRC_LOADSHARING_FC_OPT_SWITCH::ON
= NODEB_SIGNALING_PLANE_AUTO_DELETE_SWITCH::OFF
= CELL_RES_REQ_OPT_SWITCH::ON
= CARRIER_SWITCH_OFF_ALARM_OPT_SWITCH::OFF
= CELL_NAME_SYN_SWITCH::OFF
= CELL_MAX_PWR_NOT_MATCH_OPT_SWITCH::ON
Performance Switch = PERFENH_R99_BRDCSTHSPA_SWITCH::OFF
= PERFENH_MBDR_LOADCOND_OPT_SWITCH::OFF
= PERFENH_CALALGO_FOR_HSUPAENU_OPT_SWITCH::OFF
= PERFENH_CE_RLS_ADM_OPT_SWITCH::OFF
 = PERFENH_DTCH_FACH_CONG_D2I_SWITCH::OFF
= PERFENH_HSPA_CAPABLITY_NOT_BRD_SWITCH::OFF
= PERFENH_SYSINFO_64FRAME_SWITCH::OFF
= PERFENH_SIB7MIB_COMBINE_SWITCH::OFF
= PERFENH_HSPA_CODE_ALLOC_OPT_SWITCH::OFF
= PERFENH_R99UPA_FAIRNESS_USR_SEL_SWITCH::OFF
= PERFENH_HSPDSCH_SF_FORCEALLOC_SWITCH::ON
= PERFENH_OLC_REJ_F2DDCCC_SWITCH::OFF
= PERFENH_BGNOISE_QUICK_UPT_SWITCH::ON
= PERFENH_HRNTI_OPT_SWITCH::OFF
= PERFENH_FDPCH_FAULTY_RECOVER_SWITCH::ON
= PERFENH_CCH_DLCODE_RESERV_SWITCH::ON
= PERFENH_SMALL_RATE_PS_FORCE_ADM_SWITCH::ON
= PERFENH_HSDPA_DLPWR_ADM_OPT_SWITCH::ON
= PERFENH_TD_ALIGN_RRC_EFFECT::OFF
= PERFENH_DEACELL_PFMRSV_SWITCH::OFF
= PERFENH_BGNOISE_UPT_OPTIMIZE_SWITCH::ON
= PERFENH_INTERRATHO_CAC_OPT_IN_LDR_SWITCH::OFF
= PERFENH_CSFBUSER_CAC_OPT_IN_LDR_SWITCH::OFF
= PERFENH_CRNTI_OPT_SWITCH::ON
= PERFENH_FACHUSER_NUM_CTRL_ENH_SWITCH::OFF
= PERFENH_RELOCINUSER_LDRPRE_OPT_SWITCH::OFF
= PERFENH_SOFTERHO_CE_OPT_SWITCH::ON
= PERFENH_LCGCE_RSRC_OPT_SWITCH::OFF
= PERFENH_QUEUE_CANCEL_RSRC_OPT_SWITCH::OFF
= PERFENH_SRB_OVER_HSDPA_DOFF_OPT_SWITCH::ON
Performance Switch2 = PERFENH_MULTIRAB_PREEMPT_OPT_SWITCH::OFF
= PERFENH_RRC_PREEMPT_RSRC_OPT_SWITCH::OFF
= PERFENH_CODEADJ_TIME_OPT_SWITCH::OFF
= PERFENH_HSDPA_SRBDCH_CODE_CACOPT_SWITCH::OFF
= PERFENH_SIB3_MAX_PEROID_LIMIT_SWITCH::OFF
= PERFENH_SIB3_SCHEDULE_OPT_SWITCH::OFF
= PERFENH_DEMARC_NODEB_TYPE_REF_SWITCH::OFF
= PERFENH_QOSSHUTDOWN_BY_LOAD_LIC_SWITCH::ON
= PERFENH_EVENT_MEAS_ELEM_PROC_OPT_SWITCH::OFF
= PERFENH_CSMODIFY_ADMPRE_OPT_SWITCH::OFF
= PERFENH_CHTYPE_CHG_PFM_OPT_SWITCH::OFF
= PERFENH_ONE_CNOP_NO_PLMN_LIST_SWITCH::OFF
= PERFENH_DC_HSDPA_GROUP_LOAD_OPT_SWITCH::OFF
= PERFENH_HSPA_SHO_OPT_SWITCH::OFF
= PERFENH_DCLOAD_REMAIN_OPT_SWITCH::ON
= PERFENH_HSPA_CCH_IUB_RSRC_OPT_SWITCH::OFF
= PERFENH_DEMARC_SF_LDC_OPT_SWITCH::OFF
= PERFENH_PUC_OPT_SWITCH::OFF
= PERFENH_PSBERRC_PREEMPT_OPT_SWITCH::OFF
= PERFENH_DYNSHUTDOWN_OPT_SWITCH::OFF
= PERFENH_SIB4_AC_LIST_OPT_SWITCH::OFF
= PERFENH_RESREQ_PROTECT_OPT_SWITCH::OFF
= PERFENH_RIM_CSFB_OPT_SWITCH::OFF
= PERFENH_RIM_RSN_OPT_SWITCH::ON
= PERFENH_RIM_ROUTINGADDR_OPT_SWITCH::OFF
= PERFENH_L2U_SO_SWITCH::OFF
= PERFENH_CELL_CODE_MONITOR_OPT_SWITCH::OFF
= PERFENH_SIB_INTERNCELL_PRI_OPT_SWITCH::OFF
= PERFENH_PUC_CONSIDER_DC_GRP_LOAD_SWITCH::OFF
= PERFENH_FAST_CSFB_RIM_RSP_MSG_OPT_SWITCH::OFF
= PERFENH_PCPICH_ADJ_OPT_SWITCH::OFF
= PERFENH_PCHR_CELL_LOAD_OUTPUT_OPT_SWITCH::OFF
Performance Switch3 = PERFENH_MIB_COMMON_PLMN_OPT_SWITCH::OFF
 = PERFENH_USER_PRIORITY_POLICY_SWITCH::OFF
= PERFENH_CELL_DYN_CLOSE_NCELL_STAT_SWITCH::OFF
= PERFENH_DC_HSUPA_UU_ADCTRL_OPT_SWITCH::OFF
= PERFENH_CELL_CS12650_RL_POWER_OPT_SWITCH::OFF
= PERFENH_PREAMBLE_THRESHOLD_OPT_SWITCH::OFF
= PERFENH_SIB11_SIB12_OPT_SWITCH::OFF
= PERFENH_SIB_SCHDL_OPT_SWITCH::OFF
= PERFENH_SIB18_PLMN_OPT_SWITCH::OFF
= PERFENH_SIB3_DSAC_OPT_SWITCH::OFF
= PERFENH_CQI_0_H2D_SWITCH::OFF
(Number of results = 1)

--- END

SET UNBMPARA:LOGICRNCID=655,PERFENHANCESWITCH=PERFENH_HSPA_CODE_ALLOC_OPT_SWITCH-
1&PERFENH_HRNTI_OPT_SWITCH-1&PERFENH_FACHUSER_NUM_CTRL_ENH_SWITCH-
1&PERFENH_RELOCINUSER_LDRPRE_OPT_SWITCH-1&PERFENH_LCGCE_RSRC_OPT_SWITCH-
1&PERFENH_QUEUE_CANCEL_RSRC_OPT_SWITCH-
1,PERFENHANCESWITCH2=PERFENH_CODEADJ_TIME_OPT_SWITCH-1;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:49:59
O&M #1866347
%%/*1879304603*/SET UNBMPARA:
LOGICRNCID=655,PERFENHANCESWITCH=PERFENH_HSPA_CODE_ALLOC_OPT_SWITCH-
1&PERFENH_HRNTI_OPT_SWITCH-1&PERFENH_FACHUSER_NUM_CTRL_ENH_SWITCH-
1&PERFENH_RELOCINUSER_LDRPRE_OPT_SWITCH-1&PERFENH_LCGCE_RSRC_OPT_SWITCH-
1&PERFENH_QUEUE_CANCEL_RSRC_OPT_SWITCH-
1,PERFENHANCESWITCH2=PERFENH_CODEADJ_TIME_OPT_SWITCH-1;%%
RETCODE = 0 Execution succeeded.

--- END

LST UNBMPARA:;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:50:10
O&M #1866353
%%/*1879304604*/LST UNBMPARA:;%%
RETCODE = 0 Execution succeeded.

List Algorithm Parameters Related to NodeB Configuration and Maintenance

------------------------------------------------------------------------
Logical RNC ID = 655
Reliability Switch = RELIABILITY_CELL_SELFCURE_SWITCH::ON
= CELL_SIB_NOT_UPD_NCELL_CHG_SWITCH::OFF
= DPDCH_LOAD_ALG_SWITCH::OFF
= SI_VALUETAG_UPDATE_SWITCH::OFF
= DLSFRSRC_SELFCURE_SWITCH::ON
= NUMERICRSRC_SELFCURE_SWITCH::ON
= RELIABILITY_RRC_RETRANS_SWITCH::ON
= RELIABILITY_CELLUPT_FC_ENH_SWITCH::OFF
= DB_AUDIT_SWITCH::ON
= NODEB_UNAVAILABLE_ALM_NOT_RPT_SWITCH::OFF
= RELIABILITY_CELL_BROKEN_FC_ENH_SWITCH::OFF
= VALUE_TAG_PERIOD_UPT_SWITCH::ON
= CELLUPT_FC_CPU_STAT_PERIOD_CTRL_SWITCH::OFF
= MULTI_CARRIER_CELL_ALARM_OPT_SWITCH::OFF
= RRC_LOADSHARING_FC_OPT_SWITCH::ON
= NODEB_SIGNALING_PLANE_AUTO_DELETE_SWITCH::OFF
 = CELL_RES_REQ_OPT_SWITCH::ON
= CARRIER_SWITCH_OFF_ALARM_OPT_SWITCH::OFF
= CELL_NAME_SYN_SWITCH::OFF
= CELL_MAX_PWR_NOT_MATCH_OPT_SWITCH::ON
Performance Switch = PERFENH_R99_BRDCSTHSPA_SWITCH::OFF
= PERFENH_MBDR_LOADCOND_OPT_SWITCH::OFF
= PERFENH_CALALGO_FOR_HSUPAENU_OPT_SWITCH::OFF
= PERFENH_CE_RLS_ADM_OPT_SWITCH::OFF
= PERFENH_DTCH_FACH_CONG_D2I_SWITCH::OFF
= PERFENH_HSPA_CAPABLITY_NOT_BRD_SWITCH::OFF
= PERFENH_SYSINFO_64FRAME_SWITCH::OFF
= PERFENH_SIB7MIB_COMBINE_SWITCH::OFF
= PERFENH_HSPA_CODE_ALLOC_OPT_SWITCH::ON
= PERFENH_R99UPA_FAIRNESS_USR_SEL_SWITCH::OFF
= PERFENH_HSPDSCH_SF_FORCEALLOC_SWITCH::ON
= PERFENH_OLC_REJ_F2DDCCC_SWITCH::OFF
= PERFENH_BGNOISE_QUICK_UPT_SWITCH::ON
= PERFENH_HRNTI_OPT_SWITCH::ON
= PERFENH_FDPCH_FAULTY_RECOVER_SWITCH::ON
= PERFENH_CCH_DLCODE_RESERV_SWITCH::ON
= PERFENH_SMALL_RATE_PS_FORCE_ADM_SWITCH::ON
= PERFENH_HSDPA_DLPWR_ADM_OPT_SWITCH::ON
= PERFENH_TD_ALIGN_RRC_EFFECT::OFF
= PERFENH_DEACELL_PFMRSV_SWITCH::OFF
= PERFENH_BGNOISE_UPT_OPTIMIZE_SWITCH::ON
= PERFENH_INTERRATHO_CAC_OPT_IN_LDR_SWITCH::OFF
= PERFENH_CSFBUSER_CAC_OPT_IN_LDR_SWITCH::OFF
= PERFENH_CRNTI_OPT_SWITCH::ON
= PERFENH_FACHUSER_NUM_CTRL_ENH_SWITCH::ON
= PERFENH_RELOCINUSER_LDRPRE_OPT_SWITCH::ON
= PERFENH_SOFTERHO_CE_OPT_SWITCH::ON
= PERFENH_LCGCE_RSRC_OPT_SWITCH::ON
= PERFENH_QUEUE_CANCEL_RSRC_OPT_SWITCH::ON
= PERFENH_SRB_OVER_HSDPA_DOFF_OPT_SWITCH::ON
Performance Switch2 = PERFENH_MULTIRAB_PREEMPT_OPT_SWITCH::OFF
= PERFENH_RRC_PREEMPT_RSRC_OPT_SWITCH::OFF
= PERFENH_CODEADJ_TIME_OPT_SWITCH::ON
= PERFENH_HSDPA_SRBDCH_CODE_CACOPT_SWITCH::OFF
= PERFENH_SIB3_MAX_PEROID_LIMIT_SWITCH::OFF
= PERFENH_SIB3_SCHEDULE_OPT_SWITCH::OFF
= PERFENH_DEMARC_NODEB_TYPE_REF_SWITCH::OFF
= PERFENH_QOSSHUTDOWN_BY_LOAD_LIC_SWITCH::ON
= PERFENH_EVENT_MEAS_ELEM_PROC_OPT_SWITCH::OFF
= PERFENH_CSMODIFY_ADMPRE_OPT_SWITCH::OFF
= PERFENH_CHTYPE_CHG_PFM_OPT_SWITCH::OFF
= PERFENH_ONE_CNOP_NO_PLMN_LIST_SWITCH::OFF
= PERFENH_DC_HSDPA_GROUP_LOAD_OPT_SWITCH::OFF
= PERFENH_HSPA_SHO_OPT_SWITCH::OFF
= PERFENH_DCLOAD_REMAIN_OPT_SWITCH::ON
= PERFENH_HSPA_CCH_IUB_RSRC_OPT_SWITCH::OFF
= PERFENH_DEMARC_SF_LDC_OPT_SWITCH::OFF
= PERFENH_PUC_OPT_SWITCH::OFF
= PERFENH_PSBERRC_PREEMPT_OPT_SWITCH::OFF
= PERFENH_DYNSHUTDOWN_OPT_SWITCH::OFF
= PERFENH_SIB4_AC_LIST_OPT_SWITCH::OFF
= PERFENH_RESREQ_PROTECT_OPT_SWITCH::OFF
= PERFENH_RIM_CSFB_OPT_SWITCH::OFF
= PERFENH_RIM_RSN_OPT_SWITCH::ON
= PERFENH_RIM_ROUTINGADDR_OPT_SWITCH::OFF
 = PERFENH_L2U_SO_SWITCH::OFF
= PERFENH_CELL_CODE_MONITOR_OPT_SWITCH::OFF
= PERFENH_SIB_INTERNCELL_PRI_OPT_SWITCH::OFF
= PERFENH_PUC_CONSIDER_DC_GRP_LOAD_SWITCH::OFF
= PERFENH_FAST_CSFB_RIM_RSP_MSG_OPT_SWITCH::OFF
= PERFENH_PCPICH_ADJ_OPT_SWITCH::OFF
= PERFENH_PCHR_CELL_LOAD_OUTPUT_OPT_SWITCH::OFF
Performance Switch3 = PERFENH_MIB_COMMON_PLMN_OPT_SWITCH::OFF
= PERFENH_USER_PRIORITY_POLICY_SWITCH::OFF
= PERFENH_CELL_DYN_CLOSE_NCELL_STAT_SWITCH::OFF
= PERFENH_DC_HSUPA_UU_ADCTRL_OPT_SWITCH::OFF
= PERFENH_CELL_CS12650_RL_POWER_OPT_SWITCH::OFF
= PERFENH_PREAMBLE_THRESHOLD_OPT_SWITCH::OFF
= PERFENH_SIB11_SIB12_OPT_SWITCH::OFF
= PERFENH_SIB_SCHDL_OPT_SWITCH::OFF
= PERFENH_SIB18_PLMN_OPT_SWITCH::OFF
= PERFENH_SIB3_DSAC_OPT_SWITCH::OFF
= PERFENH_CQI_0_H2D_SWITCH::OFF
(Number of results = 1)

--- END

LST UNBMPHYPARA:;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:51:38
O&M #1866413
%%/*1879304605*/LST UNBMPHYPARA:;%%
RETCODE = 0 Execution succeeded.

List Parameters Related to Physical Device

------------------------------------------
Reliability Switch = DSP CPU Olc Limiting CELL_FACH
User Switch::OFF
= System Dynamic Caps FC MNTN
Switch::OFF
= Physical RNC Share Control
Switch::ON
= NodeB Cell Config Spec Check
Switch::OFF
= Switch for Auditing Objects
Under the NodeB::ON
= RRC Burst Control Switch::OFF
Flow Control Switch = Switch for Queue-based Shaping
of Cell Update Message::OFF
= Dynamic CAPS FC Optimize
Switch for High-Priority RRC::OFF
= CS Cell Dynamic CAPS FC
Optimization Switch::OFF
Max. Number of LTE Load Messages Sent Per Second = 0
CP Performance Optimization Algorithm = 0
Coverage Compensation Data Collect Switch = OFF
(Number of results = 1)

--- END

SET UNBMPHYPARA:FLOWCTRLSWITCH=HIGH_PRI_RRC_DYN_CAPS_FC_OPT_SWITCH-1;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:53:17
O&M #1866429
%%/*1879304606*/SET UNBMPHYPARA:
FLOWCTRLSWITCH=HIGH_PRI_RRC_DYN_CAPS_FC_OPT_SWITCH-1;%%
RETCODE = 0 Execution succeeded.

--- END

LST UNBMPHYPARA:;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:53:25
O&M #1866431
%%/*1879304607*/LST UNBMPHYPARA:;%%
RETCODE = 0 Execution succeeded.

List Parameters Related to Physical Device

------------------------------------------
Reliability Switch = DSP CPU Olc Limiting CELL_FACH
User Switch::OFF
= System Dynamic Caps FC MNTN
Switch::OFF
= Physical RNC Share Control
Switch::ON
= NodeB Cell Config Spec Check
Switch::OFF
= Switch for Auditing Objects
Under the NodeB::ON
= RRC Burst Control Switch::OFF
Flow Control Switch = Switch for Queue-based Shaping
of Cell Update Message::OFF
= Dynamic CAPS FC Optimize
Switch for High-Priority RRC::ON
= CS Cell Dynamic CAPS FC
Optimization Switch::OFF
Max. Number of LTE Load Messages Sent Per Second = 0
CP Performance Optimization Algorithm = 0
Coverage Compensation Data Collect Switch = OFF
(Number of results = 1)

--- END

LST URRCTRLSWITCH:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:54:21
O&M #1866442
%%/*1879304608*/LST URRCTRLSWITCH: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List Process Switch

-------------------
Logical RNC ID = 655
Process switch = INVOKE_TRACE_SWITCH::OFF
=
SYS_INFO_UPDATE_FOR_IU_RST::OFF
= DRNC_DIRECT_DSCR::ON
=
PTUSER_IDENTIFY_ENH_SWITCH::OFF
= RNCAP_IMSI_HO_SWITCH::OFF
 = SYS_HO_OUT_CIPHER_SWITCH::OFF
= SYS_HO_CIPHER_CONFIG::OFF
=
BARRED_CELL_FOR_CSDOMAIN_RST::OFF
= CDT_MSG_FULL_TRACE::ON
= UL_INTER_PROTECT_SWITCH::OFF
= FAST_DORMANCY_SWITCH::ON
= SYS_HO_IN_CIPHER_SWITCH::OFF
=
PTT_EARLY_TRANS_SWITCH_OFF::OFF
=
NODEB_PRIVATE_INTERFACE_SWITCH::ON
= PTT_SPEC_LI_SWITCH_OFF::OFF
= RNC_DF_2_URA_PCH_SWITCH::OFF
= FD_TAC_MATCH_SWITCH::OFF
=
NONPTT_L1_FAST_SYNC_SWITCH::OFF
=
URAPCH_LAYERED_PAGING_RT_SWITCH::OFF
=
URAPCH_LAYERED_PAGING_NRT_SWITCH::OFF
=
IDLE_LAYERED_PAGING_NRT_SWITCH::OFF
=
IDLE_LAYERED_PAGING_RT_SWITCH::OFF
=
INTELLIGENT_WIFI_DETECT_AND_SELECTION::OFF
=
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH::OFF
= PTUSER_IDENTIFY_SWITCH::OFF
Process Control Switch 2 = LOAD_IRAT_HO_RNC_FILL_TL::OFF
= SEND_IDT_JUDGE_IU_RESET::OFF
=
RNC_RBRECFG_DRD_FAIL_ROLLBACK_SWITCH::ON
=
RNC_CS_QUERY_UE_IMEI_SWITCH::OFF
=
RNC_PS_QUERY_UE_IMEI_SWITCH::ON
= FACH_DTCH_CONGEST_P2D::ON
=
RNC_RBSETUP_DRD_FAIL_ROLLBACK_SWITCH::ON
=
PS_NOTIFYCN_NOTDOWNSIZE_SWITCH::OFF
=
ASU_RSP_TIMEOUT_HANDLE_SWITCH::ON
=
RB_RECFG_USER_INACT_SWITCH::OFF
= RRC_SCRI_NORM_REL_SWITCH::OFF
=
CELLUPT_RLFAILURE_SRBREESTAB_SWITCH::ON
= CU_OVERLAP_DSCR_SWITCH::OFF
= TRB_RST_DSCR_SWITCH::OFF
=
RNC_FD_SCRI_FORCE_REL_SWITCH::ON
= FP_IUUP_TRACE_SWITCH::ON
=
RNC_PCHR_OUTPUT_CTRL_SWITCH::OFF
= DTMF_SWITCH::ON
=
FAST_CS_FB_BASEDON_RIM_SWITCH::OFF
=
L2U_SRVCC_WITH_PS_HO_SWITCH::OFF
= ULTRA_FLASH_CSFB_SWITCH::OFF
=
RNC_PS_QUERY_UE_IMEISV_SWITCH::OFF
=
NRNC_EXTENDED_RNCID_SWITCH::OFF
=
RNC_UE_IMSI_TAC_CORRELATION_SWITCH::OFF
=
REL_NO_PS_RAB_AFTER_ECHO_DETECT_FAIL::OFF
=
LOSSY_RELOCATION_OPT_SWITCH::OFF
=
ECHO_DETECT_FAIL_ALARM_OPT_SWITCH::OFF
= CS_INIT_DT_OPT_SWITCH::OFF
=
RB_CU_OVERLAP_DISCARD_RB_RSP_SWITCH::OFF
Process Control Switch 3 =
FACH_DCCH_CONG_CTRL_SWITCH::OFF
=
RNC_F2D_RLC_SUSPEND_SWITCH::OFF
=
UM_RRCRELCMP_RLDEL_DELAY_SWITCH::ON
= RNC_TVM_BASED_P2D_SWITCH::ON
=
CS_RLFAIL_RRCSETUP_STAT_SWITCH::OFF
=
PS_INACT_NOTREL_FOR_CSPS_SWITCH::ON
= RAB_DL_BITRATE_MOD_SWITCH::OFF
=
RAB_WAIT_IUUP_INIT_RESPONSE_SWITCH::OFF
= CS_CALL_DROP_DEFINITION::OFF
= PS_CALL_DROP_DEFINITION::OFF
=
CCH_ABNORMOLREL_CAUSE_SWITCH::OFF
= RNC_U2U_SWITCH::OFF
=
INTERRAT2U_RESUME_PS_ASAP_SWITCH::OFF
= UE_TRB_RESET_IOT_SWITCH::ON
=
CUC_CMP_NO_ACTIVE_CFN_SWITCH::OFF
=
RNC_RDY_FOR_INTERRAT_COMPATIBLE_SWITCH::OFF
Process Control Switch 4 =
PS_F2D_OVERLAP_CELLUPT_SWITCH::ON
=
AMR_HHO_FAIL_ROLLBACK_SWITCH::ON
= PHY_RECFG_REEST_SWITCH::ON
= IUR_RL_REEST_SWITCH::ON
= RB_SETUP_RL_REEST_SWITCH::ON
= RRC_CONN_SETUP_OPT_SWITCH::ON
=
TCP_ACK_ACCELERATOR_SWITCH::OFF
=
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITCH::OFF
= SEND_MSG_NULL_SWITCH::ON
= FD_PCH_IUR_CS_OPT_SWITCH::OFF
 =
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH::OFF
= CS_HHO_ASYNC_CTRL_SWITCH::ON
= PS_HHO_ASYNC_CTRL_SWITCH::ON
= IUR_HHO_ASYNC_CTRL_SWITCH::ON
=
F2P_DATATRANS_OPTIMIZE_SWITCH::ON
=
IRATHO_HOCANCEL_RL_REEST_SWITCH::ON
= TRB_RESET_RL_REEST_SWITCH::ON
= RB_REL_RL_REEST_SWITCH::ON
=
RB_SETUP_ENHANCE_RL_REEST_SWITCH::ON
=
RAB_SETUPMOD_CNT_FIX_SWITCH::OFF
=
PCH_UE_RLC_UNRECOVERABLEERROR_SWITCH::OFF
=
FAST_RETURN_LTE_BY_CELL_SELECT_SWITCH::OFF
=
UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH::OFF
=
PHYCHRECFG_ENH_RL_REEST_SWITCH::ON
=
RBRECFG_ENH_RL_REEST_SWITCH::ON
= SMC_STOP_RLC_SWITCH::ON
=
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWITCH::ON
=
CMP_IU_QOS_GTP_PDU_SN_SWITCH::OFF
= DL_TRB_RESET_BUFF_SWITCH::OFF
=
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWITCH::ON
=
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH::ON
Process Control Switch 5 =
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWITCH::OFF
=
INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH::OFF
= UL_EVQI_SWITCH::ON
= DL_EVQI_SWITCH::ON
=
VIDEO_RATE_ADAPTION_SWITCH::OFF
= VOIP_MANAGE_SWITCH::OFF
=
DIFF_SERVICE_ON_TERMINAL_SWITCH::OFF
= APP_GRP_RES_RSV_SWITCH::OFF
= RIM_ON_ECO_SWITCH::OFF
=
PRIMOPER_NONROAM_USER_CN_SA_SWITCH::OFF
=
SRBCHG_DRD_FAST_RB_SETUP_SWITCH::ON
=
SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH::ON
=
FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITCH::OFF
=
WBAMR_HHO_FAIL_ROLLBACK_SWITCH::ON
= EXTD_LAC_PAGING_SWITCH::OFF
 = TCP_PROXY_SWITCH::OFF
=
SEAMLESS_CRYSTAL_VOICE_SWITCH::OFF
= CS_RB_PRI_MC_SWITCH::ON
=
L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWITCH::OFF
=
CRYSTAL_VOICE_DEEPCOVER_SWITCH::OFF
= LOAD_BASED_P2D_SWITCH::OFF
=
PS_R99_BLER_STAT_OPT_SWITCH::OFF
=
STATE_FACH_CONSISTENT_OPTI_SWITCH::ON
= D2P_RECFG_REEST_SWITCH::OFF
=
IMPVD_UL_COVER_FOR_SRB_OVER_DCH_SWITCH::OFF
= UL_DT_SAI_PLMN_CMP_SWITCH::OFF
=
RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH::OFF
= UE_UDA_CAP_QUERY_SWITCH::OFF
= UDA_SWITCH::OFF
Reserved parameter 1 = RSVDBIT1_BIT1::OFF
= NAS_QOS_MOD_SWITCH::ON
= RSVDBIT1_BIT3::OFF
= RSVDBIT1_BIT4::OFF
= RSVDBIT1_BIT5::OFF
= RSVDBIT1_BIT6::OFF
= RSVDBIT1_BIT7::OFF
= RSVDBIT1_BIT8::OFF
= RSVDBIT1_BIT9::OFF
= RSVDBIT1_BIT10::OFF
= RSVDBIT1_BIT11::OFF
= RSVDBIT1_BIT12::OFF
= RSVDBIT1_BIT13::OFF
= RSVDBIT1_BIT14::OFF
= RSVDBIT1_BIT15::OFF
= RSVDBIT1_BIT16::OFF
= SYSHO_CSIN_PERMIT_SWITCH::ON
= RSVDBIT1_BIT18::ON
= RSVDBIT1_BIT19::ON
= RSVDBIT1_BIT20::ON
= RSVDBIT1_BIT21::ON
= RSVDBIT1_BIT22::ON
= RSVDBIT1_BIT23::ON
= RSVDBIT1_BIT24::ON
= RSVDBIT1_BIT25::ON
= RSVDBIT1_BIT26::ON
= RSVDBIT1_BIT27::ON
= RSVDBIT1_BIT28::ON
= RSVDBIT1_BIT29::ON
= RSVDBIT1_BIT30::ON
= RSVDBIT1_BIT31::ON
= RSVDBIT1_BIT32::ON
Reserved parameter 2 = RSVDBIT1_BIT1::OFF
= RSVDBIT1_BIT2::OFF
= RSVDBIT1_BIT3::OFF
= RSVDBIT1_BIT4::OFF
= RSVDBIT1_BIT5::OFF
= RSVDBIT1_BIT6::OFF
 = RSVDBIT1_BIT7::OFF
= RSVDBIT1_BIT8::OFF
= RSVDBIT1_BIT9::OFF
= RSVDBIT1_BIT10::OFF
= RSVDBIT1_BIT11::OFF
= RSVDBIT1_BIT12::OFF
= RSVDBIT1_BIT13::OFF
= RSVDBIT1_BIT14::OFF
= RSVDBIT1_BIT15::OFF
= RSVDBIT1_BIT16::OFF
= RSVDBIT1_BIT17::OFF
= RSVDBIT1_BIT18::OFF
= RSVDBIT1_BIT19::OFF
= RSVDBIT1_BIT20::OFF
= RSVDBIT1_BIT21::OFF
= RSVDBIT1_BIT22::OFF
= RSVDBIT1_BIT23::OFF
= RSVDBIT1_BIT24::OFF
= RSVDBIT1_BIT25::OFF
= RSVDBIT1_BIT26::OFF
= RSVDBIT1_BIT27::OFF
= RSVDBIT1_BIT28::OFF
= RSVDBIT1_BIT29::OFF
= RSVDBIT1_BIT30::OFF
= RSVDBIT1_BIT31::OFF
= RSVDBIT1_BIT32::OFF
Reserved parameter 3 = RSVDBIT1_BIT1::ON
= RSVDBIT1_BIT2::ON
= RSVDBIT1_BIT3::ON
= RSVDBIT1_BIT4::ON
= RSVDBIT1_BIT5::ON
= RSVDBIT1_BIT6::ON
= RSVDBIT1_BIT7::ON
= RSVDBIT1_BIT8::ON
= RSVDBIT1_BIT9::ON
= RSVDBIT1_BIT10::ON
= RSVDBIT1_BIT11::ON
= RSVDBIT1_BIT12::ON
= RSVDBIT1_BIT13::ON
= RSVDBIT1_BIT14::ON
= RSVDBIT1_BIT15::ON
= RSVDBIT1_BIT16::ON
= RSVDBIT1_BIT17::ON
= RSVDBIT1_BIT18::ON
= RSVDBIT1_BIT19::ON
= RSVDBIT1_BIT20::ON
= RSVDBIT1_BIT21::ON
= RSVDBIT1_BIT22::ON
= RSVDBIT1_BIT23::ON
= RSVDBIT1_BIT24::ON
= RSVDBIT1_BIT25::ON
= RSVDBIT1_BIT26::ON
= RSVDBIT1_BIT27::ON
= RSVDBIT1_BIT28::ON
= RSVDBIT1_BIT29::ON
= RSVDBIT1_BIT30::ON
= RSVDBIT1_BIT31::ON
= RSVDBIT1_BIT32::ON
DL RAB Bit Rate = 0
 CBS message ID = 5000
Iub Private Interface Switch = RL_OpIndex_INCLUDED::OFF
= PSCRR_OpIndex_INCLUDED::OFF
=
RADIO_LINK_IUR_INDICATION_INCLUDED::OFF
Optimization Switch = PAGGING_NUM_CTRL_SWITCH::OFF
= ASU_RL_RESET_SWITCH::ON
= MC_RL_RESET_SWITCH::ON
=
FD_PCH_REENTERSA_FORCE_RRC_REL_SWITCH::ON
= UE_CRC_COMPATIBLE_SWITCH::OFF
= RNC_P2D_DRD_SWITCH::OFF
= P2D_SWITCH::OFF
=
AMR_F2D_OVERLAP_CELLUPT_SWITCH::ON
= SRB_RESET_RL_SETUP_SWITCH::ON
= RLFAIL_RL_SETUP_SWITCH::ON
= CS_RL_SETUP_SWITCH::ON
= PS_RL_SETUP_SWITCH::ON
= UE_SRB_RESET_SWITCH::ON
= RL_RESTORE_SWITCH::ON
= RNC_EFD_D2F_SWITCH::ON
=
RNC_RB_SCRI_NOT_DROP_SWITCH::ON
= RRC_RECONN_SWITCH::OFF
= RRC_REPEAT_PFM_SWITCH::ON
= F2D_NO_RSP_RRCREL_SWITCH::ON
= CS_SETUP_P2D_SWITCH::ON
= SYSHO_CIPHER_IE_SWITCH::OFF
= P2P_GTPU_NOT_CFG_SWITCH::ON
=
RB_SETUP_CIPHER_TIME_ADJ_SWITCH::ON
= CS_PRI_MOD_NOT_INT_SWITCH::OFF
=
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH::OFF
=
IU_FAULT_REL_PS_RES_SWITCH::OFF
= RB_RECFG_RL_REEST_SWITCH::ON
= F2P_DT_MSG_BUFFER_SWITCH::ON
= SCRI_COMPATIBLE_SWITCH::OFF
= GTPU_ERR_IND_DEF_SWITCH::ON
=
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH::ON
=
UL_INTEG_ALGO_COMPAT_SWITCH::OFF
Optimization Switch2 =
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_SWITCH::OFF
=
MULTIRAB_ATTESTAB_DEF_SWITCH::OFF
=
PCH_UE_SRB_RESET_DSCR_SWITCH::OFF
=
DRNC_CELL_CODE_CONFLICT_OPT_SWITCH::ON
= RAB_FAIL_CAUSE_SWITCH::OFF
= PSPS_SETUP_REL_DEF_SWITCH::OFF
=
RRC_CON_REQ_TIMES_COMPATIBLE_SWITCH::ON
= SECU_CU_CROSS_SWITCH::ON
= HHO_CNT_CORRECT_SWITCH::OFF
 = IRATHO_CNT_CORRECT_SWITCH::ON
=
RB_CU_CROSS_COMPATIBLE_SWITCH::ON
=
RNTI_ENH_ALLOC_AlGO_SWITCH::OFF
= DRNC_LOAD_CTRL_SWITCH::ON
=
EFACH_CU_COMMON_HRNTI_SWITCH::ON
= PSCS_CALLDROP_FIX_SWITCH::ON
=
CSABNREL_DUETO_PSREL_FIX_SWITCH::ON
= SIG_RL_REEST_SWITCH::OFF
= SIG_SMC_RL_REEST_SWITCH::OFF
= SIG_ASU_RL_REEST_SWITCH::OFF
Function Switch =
RRC_CONN_STATE_TO_NODEB_SWITCH::OFF
= CS_SECMODE_PRI_CSPS_SWITCH::ON
= AMR_SILENT_DETECT_SWITCH::ON
=
IU_FLEX_CONG_DISCARD_SWITCH::OFF
=
DISCONNECT_RL_REEST_ENHANCE_SWITCH::OFF
=
UL_INTEG_ALGO_FOR_CELLUPDATE_SWITCH::ON
= AMRWB_SILENT_DETECT_SWITCH::ON
=
SEROBJCFG_NOT_CMP_ALM_REPORT_SWITCH::OFF
= RRC_MSG_CN_INFO_SWITCH::OFF
=
NRNC_BKCFG_NOT_CMP_ALM_REPORT_SWITCH::OFF
Maximum Paging Times for UEs in CELL_PCH = 5
Maximum Paging Times for UEs in URA_PCH = 5
Optimization Switch3 =
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH::ON
=
RL_REEST_PS_ON_FACH_SWITCH::OFF
=
CELLUPDATE_MEASUREMENT_OPT_SWITCH::ON
=
D2F_PROCEDURE_OPTIMIZATION_SWITCH::ON
=
F2D_PROCEDURE_OPTIMIZATION_SWITCH::ON
=
FOREVER_PCH_CTRL_PLANE_SHARE_OPT::OFF
=
FOREVER_PCH_USER_PLANE_SHARE_OPT::OFF
=
RAB_REL_SRV_CELL_CHG_CROSS_SWITCH::ON
=
SCRIWITHCAUSE_OVERLAP_SWITCH::OFF
= P2F_CUC_REPEAT_SWITCH::OFF
=
UU_ABN_REL_INFO_NOTIFY_NODEB_SWITCH::ON
=
D2F_AM_PROCEDURE_OPTIMIZATION_SWITCH::ON
=
AM_D2F_F2D_RESTMR_OPTIMIZATION_SWITCH::ON
= D2P_DT_MSG_BUFFER_SWITCH::ON
=
CM_CODE_CONFLICT_OPT_SWITCH::ON
=
H_SERV_CELL_CHANGE_MSG_OPT_SWITCH::ON
=
FAST_HSDPA_SERV_CELL_CHANGE_SWITCH::ON
=
RLRST_ASU_SUCC_COUNTERS_CORRECT_SWITCH::OFF
=
COUNT_STATE_CHG_BY_RAB_EHN_SWITCH::OFF
=
RAB_RELATED_COUNTER_OPT_SWITCH::ON
=
CELLUPDATE_PROCEDURE_OPT_SWITCH::ON
=
PTT_PAGING_PRD_CRRCT_SWITCH::OFF
=
RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWITCH::ON
= L2U_UP_DELAY_OPT_SWITCH::ON
=
PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_SWITCH::OFF
=
F2D_AFTER_P2F_MEASUREMENT_OPT_SWITCH::OFF
Rate of NBAMR UEs with Noise Detection in the DL = 100
Rate of WBAMR UEs with Noise Detection in the DL = 100
Improvement Switch =
CONVERT_RELOC_FAIL_CAUSE_SWITCH::OFF
=
DELAY_DRNC_CODE_REL_SWITCH::OFF
=
ROUT_IDT_BY_ROUTING_PARA_SWITCH::OFF
=
COUNT_CS_REC_IU_REL_CMD_SWITCH::ON
=
SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH::ON
=
REL_IUR_CCH_BEFORE_DSCR_SWITCH::ON
=
RELOC_CIPHER_PENDING_COMPATI_SWITCH::OFF
=
COUNT_SPECIAL_RAB_ATT_SWITCH::OFF
=
COUNT_STATE_CHG_BY_RAB_SWITCH::OFF
= DELAY_SEND_MEACTRL_SWITCH::ON
= CS_DISCONNECT_OPT_SWITCH::ON
=
NON_DCCC_RBRECFG_RL_REEST_SWITCH::ON
= SMC_RL_REEST_SWITCH::ON
=
PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH::OFF
= PAGING_OM_OPTIMIZE_SWITCH::OFF
=
DEACTIVE_CELLHSPA_H2F_SWITCH::OFF
=
OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH::OFF
=
RAB_SETUP_CNT_CORRECT_SWITCH::ON
=
FACH_DCCH_RRC_REL_NO_RSP_DELAY_USE_URNTI::ON
=
FACH_CCCH_RRC_REL_NO_RSP_DELAY_USE_URNTI::OFF
=
RB_SETUP_RLC_INFO_OPT_SWITCH::OFF
=
DCH_DISCARD_CELL_RESEL_CU_MSG_SWITCH::OFF
=
SYS_INIT_SPU_STATE_BROADCAST_OPT_SWITCH::ON
=
RB_RECFG_F2D_ISR_IC_FAIL_RRC_REL_SWITCH::ON
=
PTT_RAB_SETUP_ATT_CNT_CORRECT_SWITCH::OFF
=
P2D_DRD_FAIL_BACK_RESEL_CELL_SWITCH::OFF
=
TRB_RST_CU_NOT_REEST_UM_RLC_TRB_SWITCH::OFF
=
ONE_CNNODE_SCCP_CONG_SEL_OTHER_SWITCH::ON
= CSFB_UE_DELAY_RAU_SWITCH::OFF
=
CSFB_UE_CS_IMEI_QUERY_DISABLE_SWITCH::OFF
Paging Type 1 Resending Times for PCH UE Release = 3
Optimization Switch4 =
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH::ON
=
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_SWITCH::OFF
= DRNC_RL_REEST_OPT_SWITCH::ON
=
URA2FACH_OVERLAP_CELLUPT_PROC_SWITCH::OFF
=
RB_SETUP_F2D_USE_AM_RLC_SWITCH::ON
=
RB_RECFG_D2F_USE_AM_RLC_SWITCH::ON
=
RB_RECFG_F2D_USE_AM_RLC_SWITCH::ON
=
RRC_UE_USER_SMOOTH_OPT_SWITCH::ON
= TRNC_LOAD_CTRL_SWITCH::OFF
=
IU_SIG_REL_PCH_PAGING_SWITCH::OFF
= CPC_OPT_FOR_RLSETUP_SWITCH::ON
=
D2P_L2DEACT_FAIL_OPT_SWITCH::OFF
= EFACH_RRC_REG_CMP_SWITCH::OFF
=
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH::OFF
=
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWITCH::ON
=
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITCH::OFF
= SCM_CU_CROSS_SWITCH::ON
= DRNC_HSPA_CM_OPT_SWITCH::OFF
= IUB_TRANSID_OPT_SWITCH::OFF
= ASYN_RL_REEST_OPT_SWITCH::OFF
= RNC_IMSI_HO_OPT_SWITCH::OFF
=
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWITCH::OFF
=
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWITCH::OFF
=
PAGING_OVERLAP_CU_OPT_SWITCH::ON
=
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH::ON
=
SOCKET_RECEIVE_DATA_CORRECT_SWITCH::ON
=
CU_PRI_OVERLAP_OTHER_PROC_SWITCH::OFF
=
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH::ON
=
CS_PAGING_OVERLAP_RRC_OPT_SWITCH::OFF
=
INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH::OFF
=
DRNC_RL_PARA_UPT_OPT_SWITCH::ON
Optimization Switch5 =
U2L_RELOC_MSG_TAKE_ERAB_SWITCH::OFF
=
PS_DOMAIN_REL_RAB_SETUP_SWITCH::OFF
=
PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH::OFF
=
GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH::OFF
=
D2P_TWO_SIDE_RLC_REEST_SWITCH::ON
=
D2F_SRNS_CONTEXT_REQ_OPT_SWITCH::OFF
=
DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH::ON
= DSP_CAP_JUDGE_SWITCH::ON
=
RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH::ON
=
RB_RFG_MSG_USE_NEW_SG_SWITCH::OFF
=
SRB3_SRB4_RLC_RST_RRC_REL_SWITCH::OFF
=
WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM_SWITCH::OFF
=
PS_0K_STATIC_RELOC_IN_CMP_SWITCH::OFF
=
ADD_DRL_PS_0K_TO_8K_SWITCH::OFF
= CU_AL_RES_OPT_SWITCH::OFF
=
DRNC_SERV_CELL_CHG_BUGFIX_SWITCH::OFF
=
TRNC_TPC_INDEX_ALLOC_SWITCH::ON
= IUR_ATM_TRAN_OPT_SWITCH::OFF
=
RELOC_REQ_CIPHER_COMP_SWITCH::OFF
=
STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWITCH::ON
=
RNC_IN_POOL_IU_RESET_SWITCH::ON
=
USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH::ON
=
RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_SWITCH::OFF
=
PS_U2L_USER_PLANE_DELAY_OPT_SWITCH::OFF
=
P2F_CU_CAUSE_CHG_OPT_SWITCH::OFF
=
P2F_REDIRECT_CELLUPDT_RESEND_OPT_SWITCH::OFF
=
RELOC_IN_PROCESS_OPT_SWITCH::OFF
= CU_ROUT_OPT_SWITCH::OFF
=
RRC_REL_CROSS_DETACH_INIT_SWITCH::OFF
Optimization Switch6 =
FACH_RB_REL_CU_CROSS_OPT_SWITCH::OFF
= CMCF_CHECK_CMP_SWITCH::OFF
= ASU_RSP_FAIL_REL_UE::ON
= CELL_PCH_UES_OPT_SWITCH::OFF
=
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH::OFF
=
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SWITCH::OFF
=
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH::OFF
=
IUB_TRM_PREALLOC_OPT_SWITCH::OFF
= SRB_EDCH_RECFG_OPT_SWITCH::OFF
=
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH::OFF
=
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG::OFF
=
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH::OFF
=
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITCH::OFF
= RL_PROCEDURE_OPT_SWITCH::OFF
= CU_OVERLAP_OPT_SWITCH::OFF
=
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_SWITCH::OFF
= ADJUST_CNID_WITH_CN::OFF
=
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET::OFF
= CS_TRIG_PS_F2D_SWITCH::OFF
=
DEAL_RL_RECFG_CORRECT_SWITCH::OFF
=
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWITCH::OFF
=
CODE_CONFLICT_RL_REEST_SWITCH::ON
=
RELOC_IN_AMR_NOISE_DETECT_SWITCH::ON
=
CMP_NO_ACTIVE_CFN_OPT_SWITCH::ON
=
NON122_AMR_HHO_ROLLBACK_SWITCH::ON
=
VQI_AFTER_DT_CONNECT_SWITCH::OFF
=
FACH_CU_RELOC_RB_MSG_COMP_SWITCH::OFF
=
SRNS_PROCEDURE_OPTIMIZE_SWITCH::OFF
=
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWITCH::OFF
=
DRNC_BUFF_RL_RECFG_PREP_SWITCH::OFF
=
PS_DCH0K_RB_MSG_OPT_SWITCH::OFF
=
PS_DSCR_IU_REL_COMPATIBLE_SWITCH::ON
UL Integrity Protection Fail Tolerance Times = 3
Optimization Switch7 =
F2PU_RESELECT_CU_OVERLAP_SWITCH::OFF
=
F2PU_DATATRANS_CU_OVERLAP_SWITCH::OFF
= F2P_USE_AM_RLC_SWITCH::OFF
= FACH_OUTOFSER_OPT_SWITCH::ON
= P2D_PREPFAIL_OPT_SWITCH::OFF
=
URA_PCH_RESEL_CU_OPT_SWITCH::OFF
=
D2F_ABNORMAL_FORCETOFACH_SWITCH::ON
=
RLFAIL_OR_TRBRST_D2F_RLREEST_SWITCH::ON
= UE_DCH_CU_RL_REEST_SWITCH::ON
=
CS_RB_SETUP_RL_REEST_SWITCH::ON
=
PS_RB_SETUP_RL_REEST_SWITCH::ON
=
RBSETUP_RLREEST_RABSETUPCNT_CORRECT::OFF
=
RBSETUP_UEDCHCU_RABSETUPCNT_CORRECT::OFF
=
PROC_FOREC_SUCC_COUNTER_OPT_SWITCH::OFF
=
FD_SCRI_RCV_IN_RRC_PROC_OPT_SWITCH::ON
=
INNER_CBC_ENCODE_OPT_SWITCH::OFF
=
PLMNID_OPT_IN_RELOC_RQD_SWITCH::OFF
= RB_PROCEDURE_OPT_SWITCH::ON
=
PLATINUM_TMSI_BROADCAST_OPT_SWITCH::OFF
=
SPECUSER_FAST_RBCFG_OPT_SWITCH::OFF
=
RB_SETUP_F2D_CU_CROSS_OPT_SWITCH::ON
=
RESTORE_DISCARD_RAB_ASSIGN_REQ_SWITCH::OFF
= IUR_SIG_E2D_OPT_SWITCH::OFF
=
RAB_SETUP_ATT_R99_CNT_CORRECT_SWITCH::OFF
=
SRB_OVER_HSDPA_CFN_CORRECT_SWITCH::ON
=
CS_RAB_SETUP_DRD_OPT_SWITCH::OFF
=
SERVICE_QUALITY_MEAS_OPT_SWITCH::ON
=
IRATHO_HO_OUT_PROCEDURE_OPT_SWITCH::OFF
=
IUB_ATM_IP_RL_RECFG_OPT_SWITCH::ON
=
ACTIVE_CMCF_FAIL_RL_REEST_SWITCH::OFF
=
PFM_PS_CELLDCHUES_PLMN_OPTI_SWITCH::OFF
=
RL_REEST_TRIGGER_MSG_OPT_SWITCH::OFF
User Selection for Video Prioritization = PLATINUM_USER::OFF
Optimization Switch8 =
PS_RAB_REL_GTPU_RESOURCE_UNAVAILABLE::OFF
=
MNTN_TWO_PENDING_INTEGRITY_CFG_SWITCH::OFF
=
DCCC_HHO_CU_NO_CHANGING_GTPU_IP_SWITCH::OFF
=
RAB_MODIFY_NO_CHANGING_GTPU_IP_SWITCH::OFF
=
IUR_F2P_P2P_OVERLAP_CU_TRIG_DSCR_SWITCH::OFF
=
STATE_TRANS_COUNT_OPT_SWITCH::OFF
= CU_RB_CFG_OPT_SWITCH::OFF
=
SEND_RNSAP_RESET_AGAIN_SWITCH::OFF
=
SYS_HO_RELOC_CMP_OPT_SWITCH::OFF
= CSPS_SYS_HO_IN_SMC_SWITCH::OFF
=
MOCN_REDIR_GET_SPID_OPT_SWITCH::ON
=
DCH_DISCARD_NONDCH_CU_MSG_SWITCH::OFF
=
CMCF_ACTIVE_RECFG_REEST_SWITCH::ON
=
DCH_RB_REL_CU_OVERLAP_OPT_SWITCH::ON
=
FACH_SRNS_CONTEXT_REQ_OPT_SWITCH::OFF
=
CSFB_USER_IDENTIFY_OPT_SWITCH::OFF
=
F2D_RBSETUP_CU_OVERLAP_OPT_SWITCH::OFF
=
INIT_DT_OVERLAP_CU_OPT_SWITCH::OFF
=
SRVCC_RELOC_IN_CIPHER_OPT_SWITCH::OFF
=
RLREEST_RAB_SETUPFAIL_CNT_FIX_SWITCH::OFF
=
MOCN_SAME_DOMAIN_DISC_INIT_DT_SWITCH::OFF
= RL_PROCEDURE_OPT_SWITCH2::OFF
=
RABSETUP_OVERLAP_CU_RELOC_OPT_SWITCH::OFF
= RL_CNT_OPT_SWITCH::OFF
=
TRNC_RELOC_IN_SUCC_OPT_SWITCH::OFF
=
RELOC_ACK_WAIT_IUUP_INIT_SWITCH::ON
=
ASU_CU_CROSS_OPT_ENH_SWITCH::ON
= RB_RL_REEST_OPT_ENH_SWITCH::ON
 = DCH_CU_CHGCELL_OPT_SWITCH::OFF
= RELOC_SILENT_DETECT_SWITCH::ON
=
RL_FAIL_SUSP_SHO_DEL_SWITCH::OFF
Process Control Switch6 =
RLCBUF_PDU_CALCU_IN_ACTIVE_TIME_SWITCH::OFF
=
STORE_MC_IN_UU_CFG_PROCEDURE_SWITCH::OFF
=
PCHR_STORE_ACT_TIME_INFO_SWITCH::OFF
=
SRNS_WITH_CSFB_IND_ACK_SWITCH::OFF
=
PAGING_CROSS_RELPROC_OPT_SWITCH::OFF
= RRC_SETUP_DSCR_OPT_SWITCH::OFF
= ASYN_START_CM_SWITCH::OFF
=
R8FD_IMEITAC_ENABLE_SWITCH::OFF
= ABNORM_D2EFACH_OPT_SWITCH::OFF
=
EFACH_RBSETUP_F2D_CU_OVERLAP_SWITCH::OFF
=
HHO_ASYNC_RBRECFG_TIMEOUT_OPT_SWITCH::OFF
=
EFACH_CS_TRIG_PS_F2D_SWITCH::OFF
=
L2U_SRVCC_PS_NUMOUT_CS_RELOC_IN_SWITCH::OFF
=
DRNC_RLCC_WITH_ASU_OPT_SWITCH::OFF
= EFACH_RRC_CMP_OPT_SWITCH::OFF
=
EFACH_RRC_MSG_MACHS_RESET_SWITCH::OFF
=
EFACH_PCH2PCH_CU_TIMEOUT_DSCR_SWITCH::OFF
=
VOIP_IP_PORT_QOS_ENH_SWITCH::OFF
=
RB_SETUP_ROLLBACK_FAIL_PFM_OPT_SWITCH::OFF
=
STORE_MC_IN_UU_CFG_PRO_ENH_SWITCH::OFF
=
VIP_FULL_MOSINFO_AUTOTRACE_SWITCH::OFF
=
RNC_UE_IMSI_TAC_CORRELATION_OPT_SWITCH::OFF
Optimization Switch9 =
MULTI_CSRAB_RBINVCFG_OPT_SWITCH::ON
=
RNSAP_TRANS_ADDR_CHECK_SWITCH::OFF
=
NON_WAIT_UE_RESP_RNC_ABNORMAL_OPT_SWITCH::OFF
=
DCCC_P2F_COUNTER_OPT_SWITCH::OFF
=
CORRECT_CELL_RAB_REL_COUNTER_SWITCH::OFF
=
CU_RAB_NON_RB_PROC_OPT_SWITCH::OFF
=
ERGCH_EHICH_INFO_OPT_SWITCH::OFF
=
IUR_RL_REESTABLISHMENT_OPT_SWITCH::OFF
= CU_SRB_REEST_RLC_RECFG_OPT::ON
=
NON_UU_RLRSP_RL_RESET_SWTICH::OFF
= IUR_CMCH_OPT_SWITCH::OFF
=
INTERRAT_HO_DATAFWD_TIMER_OPT_SWITCH::OFF
=
DSCR_RLREL_AFTER_RRC_REL_COMPLETE::OFF
=
RNC_SUP_RELOC_CANCEL_WHEN_INTERRUPT::ON
=
PS_RAB_MODIFY_RL_REEST_FIX_SWITCH::ON
=
CS_TRIG_PS_F2D_CNT_FIX_SWITCH::OFF
=
MAINTAIN_TWO_INTEGPROT_PARA_SWITCH::ON
=
RAB_ASSGINMENT_ATTEMPT_CORRECT_SWITCH::OFF
=
IUB_HSDSCH_USER_PRIORITY_SEND_SWITCH::ON
=
CSFB_RAU_DELAY_FOR_REG_SWITCH::OFF
=
RAB_NORMREL_UEGEN_COUNTER_FIX_SWITCH::OFF
=
REC_FAST_RETURN_IN_PREV_PINGPONG_SWITCH::OFF
=
IUR_SEAMLESS_PAGING_OPT_SWITCH::OFF
= PS_RB_PDP_PARALLEL_SWITCH::OFF
=
FIX_CSFB_USER_IDENTIFY_SWITCH::OFF
=
WAITING_FOR_CN_REL_MSG_TIMER_OPT_SWITCH::OFF
=
PAGING_OVERLAP_CU_ENH_OPT_SWITCH::OFF
=
CS_RAB_REL_U2L_TRIG_ORDER_OPT_SWITCH::OFF
=
RB_FAST_SETUP_FAIL_COUNTER_OPT_SWITCH::OFF
=
IUR_RL_RSP_NON_DRNTI_OPT_SWITCH::OFF
= MOCN_RIM_PLMN_OPT_SWITCH::ON
Improvement Switch2 = CSFB_DELAY_OPT_ENH_SWITCH::OFF
=
NODEB_RL_VIP_NOTIFY_SWITCH::OFF
= CIPHER_TIME_ADJ_OPT_SWITCH::ON
Estimated Num. of DT MSG During Re-locations = 0
Optimization Switch10 =
SECU_CU_CROSS_IP_OPT_SWITCH::OFF
= RRC_REL_REDIR_OPT_SWITCH::OFF
=
RL_RESET_OVERLAP_CU_OPT_SWITCH::OFF
=
UNSTABLE_PREEMPTED_USER_REL_OPT_SWITCH::OFF
=
IUFLEX_CS_IMSI_PAGING_UE_COMPAT_SW::OFF
=
PCH_DISABLED_USE_EFD_SWITCH::OFF
 =
CS_PAGING_OVERLAP_RRC_EST_SWITCH::OFF
=
CS_PAGING_OVERLAP_DSCR_SWITCH::OFF
=
FACH_CU_WITH_CRNTI_OPT_SWITCH::OFF
= RL_PROCEDURE_OPT_SWITCH3::OFF
=
FACH_IUR_CU_CELL_RES_ALOC_SWITCH::OFF
=
RAB_FAST_RB_SETUP_ACTCFG_OPT_SWITCH::OFF
=
EFD_D2P_SEND_PAGING_OPT_SWITCH::OFF
=
SRB_OVER_HSPA_OPT_BASED_RLREEST_SWITCH::OFF
=
HO_SS_USER_IDENTIFY_SWITCH::OFF
=
RRC_REJ_TNLFAIL_CNT_SWITCH::OFF
= FIX_PFM_SYSOUT_FAIL_SWITCH::ON
=
RL_REEST_COUNTER_CORRECT_SWITCH::OFF
=
RRC_REPEAT_REQ_CNT_CORRECT_SWITCH::OFF
=
RB_CU_OVERLAP_SRB_REEST_OPT_SWITCH::OFF
= SIG_SECU_CU_CROSS_SWITCH::OFF
= URA_PCH_PAGING_OPT_SWITCH::OFF
=
ULTRAFAST_CS_NAS_BUF_FAIL_OPT_SWITCH::OFF
=
UE_CAP_OVER_LEN_OPT_SWITCH::OFF
=
IRATHO_DISCONNECT_CS_SWITCH::OFF
=
IRATHO_RRC_RELEASE_REDIRECTION_PS_SWITCH::OFF
=
IRATHO_RETURN_CNT_CORRECT_PS_SWITCH::OFF
=
RRC_REL_NAS_CONFLICT_OPT_SWITCH::OFF
=
URA_PCH_PAGING_OPINDEX_OPT_SWITCH::OFF
= RAB_MODIFY_AL_OPT_SWITCH::OFF
=
IRATHO_HOCANCEL_RL_REEST_FIX_SWITCH::OFF
=
INTER_RAT_HO_ATTEMPT_OPT_SWITCH::OFF
Optimization Switch11 =
HO_FROM_U_FAILURE_TID_NOCHK_SWITCH::OFF
=
IRATHO_OUT_PROCEDURE_OPT_SWITCH::OFF
=
CSPS_DSCR_DATA_FORWARD_SUCC_SWITCH::OFF
=
RELOC_REQ_WITH_CORRECT_CRNTI_SWITCH::OFF
=
IUR_CU_FAIL_PROC_OPT_SWITCH::OFF
=
D2F_OVERLAP_FACH_CU_OPT_SWITCH::OFF
 =
CS_CIPHER_BASE_TIME_PARA_FIX_SWITCH::OFF
=
DSCR_DELAY_RLDEL_OPT_SWITCH::OFF
=
L2_ENHANCE_RECFG_OPT_SWITCH::OFF
=
CS_AND_PS_REG_CO_REDIR_ATT_FLAG_SWITCH::OFF
=
CSPS_SRB_OVER_H_ACT_TIME_CORRECT_SWITCH::ON
=
CSPS_SRB_OVER_HSDPA_CFN_CORRECT_SWITCH::ON
=
CSFB_UE_DELAY_RAU_ENHANCE_SWITCH::OFF
=
D2F_CROSS_RLCFAIL_CU_OPT_SWITCH::OFF
=
UE_REL_BELOW_R5_P2D_DISABLE_SWITCH::OFF
= DRNC_RL_OPT_SWITCH::OFF
=
FP_FAILURE_RL_REEST_SWITCH::OFF
=
CSPS_PS_RB_DRD_FAIL_ROLLBACK_SWITCH::OFF
=
RAB_SETUP_OVERLAP_IU_REL_STAT_OPT_SW::OFF
=
IU_REL_DEL_BUFFER_MSG_SWITCH::OFF
=
GSM_SYSOUT_RELOC_CANCEL_OPT_SWITCH::OFF
=
ICR_CELL_IUR_CU_OPT_SWITCH::OFF
=
RAB_ESTAB_STAT_WITHOUT_IRAT_DR_SWITCH::OFF
=
IU_REL_COMMAND_MSG_DELAY_OPT_SWITCH::OFF
=
DSCR_RRC_REL_RESEND_OPT_SWITCH::OFF
=
RELOCATION_PROCESS_PLMN_OPT_SWITCH::OFF
=
UE_CAP_OVER_LEN_PSHO_OPT_SWTICH::OFF
=
RELOC_PREP_CROSS_IU_REL_CMD_OPT_SW::OFF
=
CSFB_ACCESS_DELAY_MEAS_OPT_SWITCH::OFF
=
PS_PAGING_OM_OPTIMIZE_SWITCH::OFF
=
GARBLED_VOICE_CFN_ACTIVETIME_OPT_SWITCH::ON
=
SHO_DEL_RL_CROSS_FP_FAIL_IND_OPT_SW::OFF
Optimization Switch12 = RL_PROCEDURE_OPT_SWITCH4::OFF
=
RB_CONFIG_OVERLAP_CU_OPT_SWITCH::OFF
=
CELL_RRC_REPEAT_REQ_CNT_CORRECT_SW::OFF
= F2D_TXPWR_INCREASE_SWITCH::OFF
= PCH_OUTOFSER_OPT_SWITCH::OFF
= IFHO_ATT_COUNT_OPT_SWITCH::OFF
 =
RNC_OBTAIN_ACTIVETIME_REF_CFN_OPT_SW::ON
=
AAL2_MOD_PROCEDURE_OPT_SWITCH::OFF
=
SHO_CU_CROSS_COUNTERS_OPT_SWITCH::OFF
=
SERVCELLCHG_CU_CROSS_COUNTERS_OPT_SWITCH::OFF
=
RELOC_SMC_SRB3_SRB4_SN_CORRECT_SWITCH::OFF
= CN_CFG_CONSISTENCY_CHK_SW::OFF
= N302_PROCESS_OPT_SWITCH::OFF
= U2L_PS_HO_OPT_SWITCH::OFF
=
DIRECT_TRANSFER_PLMNID_LAC_OPT_SWITCH::OFF
= L2U_HO_CMP_OPT_SWITCH::OFF
=
DCH_CU_OVERLAP_CU_OPT_SWITCH::OFF
=
DCCC_OVERLAP_IUR_CELLUPT_OPT_SWICTH::OFF
=
PCH_CELLUPT_FAIL_ROLLBACK_OPT_SWITCH::OFF
=
D2F_OVERLAP_IUR_EFACH_CELLUPT_OPT_SWITCH::OFF
= CS_SETUP_P2D_OPT_SWITCH::OFF
=
ORIG_CALL_CS_RAB_PRE_RSP_SWITCH::OFF
=
CSFB_FAST_RETURN_EHN_OPT_SWITCH::OFF
=
CU_RELOC_MUTLI_SCCPCH_OPT_SWITCH::OFF
=
FMA_PS_CALLDROP_OPT_SWITCH::OFF
= AMRBLER_AFTER_CONN_SWITCH::OFF
=
RELOC_REQ_CSPS_CIPHER_OPT_SWITCH::OFF
=
U2L_CSFB_UNSTABLE_FAST_RETURN_OPT_SWITCH::OFF
=
DRNC_SERVER_LINK_CHANGE_OPT_SWITCH::OFF
=
IMSI_ROUTING_PROCESS_OPT_SWITCH::OFF
=
RB_OVERLAP_RRC_REQ_RAB_CNT_OPT_SWITCH::OFF
=
AMR_AVERAGE_DELAY_OPT_SWITCH::ON
Short Call Detect Threshold = 6
Smart TFRC UE Cluster Mode = OFF
Smart Traffic Cluster Mode = OFF
License Share Ratio for ICR = 0
Optimization Switch13 =
MOCN_RECONSTRUCT_IU_REL_OPT_SWITCH::OFF
=
U2L_SRVCC_FAST_RETURN_PROC_OPT_SWITCH::OFF
=
SEROBJ_NOT_CMP_ALM_RPT_OPT_SWITCH::OFF
= IU_REL_PROCESS_OPT_SWITCH::OFF
=
IU_RELEASE_OVERLAP_RLREEST_OPT_SWITCH::OFF
 =
RRC_CONN_SETUP_PARALLEL_OPT_SWITCH::OFF
=
ASYNC_PROCEDURE_OPT_SWITCH::OFF
=
G2U_NO_ENCRY_PARA_OPT_SWITCH::OFF
= EXTEND_NRNCID_OPT_SWITCH::OFF
=
UPLINK_COORDINATING_RL_OPT_SWITCH::OFF
=
EMERGENCY_CALL_TRACE_SWITCH::OFF
= BUFFER_MSG_OPT_SWITCH::OFF
(Number of results = 1)

--- END

SET URRCTRLSWITCH:LOGICRNCID=655,PROCESSSWITCH4=TCP_ACK_ACCELERATOR_SWITCH-
1,OPTIMIZATIONSWITCH4=ASYN_RL_REEST_OPT_SWITCH-
1,OPTIMIZATIONSWITCH8=RABSETUP_OVERLAP_CU_RELOC_OPT_SWITCH-
1&DCH_CU_CHGCELL_OPT_SWITCH-1,OPTIMIZATIONSWITCH12=PCH_OUTOFSER_OPT_SWITCH-1;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:58:34
O&M #1866478
%%/*1879304609*/SET URRCTRLSWITCH:
LOGICRNCID=655,PROCESSSWITCH4=TCP_ACK_ACCELERATOR_SWITCH-
1,OPTIMIZATIONSWITCH4=ASYN_RL_REEST_OPT_SWITCH-
1,OPTIMIZATIONSWITCH8=RABSETUP_OVERLAP_CU_RELOC_OPT_SWITCH-
1&DCH_CU_CHGCELL_OPT_SWITCH-1,OPTIMIZATIONSWITCH12=PCH_OUTOFSER_OPT_SWITCH-1;%%
RETCODE = 0 Execution succeeded.

--- END

LST URRCTRLSWITCH:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 19:59:00
O&M #1866485
%%/*1879304610*/LST URRCTRLSWITCH: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List Process Switch

-------------------
Logical RNC ID = 655
Process switch = INVOKE_TRACE_SWITCH::OFF
=
SYS_INFO_UPDATE_FOR_IU_RST::OFF
= DRNC_DIRECT_DSCR::ON
=
PTUSER_IDENTIFY_ENH_SWITCH::OFF
= RNCAP_IMSI_HO_SWITCH::OFF
= SYS_HO_OUT_CIPHER_SWITCH::OFF
= SYS_HO_CIPHER_CONFIG::OFF
=
BARRED_CELL_FOR_CSDOMAIN_RST::OFF
= CDT_MSG_FULL_TRACE::ON
= UL_INTER_PROTECT_SWITCH::OFF
= FAST_DORMANCY_SWITCH::ON
= SYS_HO_IN_CIPHER_SWITCH::OFF
=
PTT_EARLY_TRANS_SWITCH_OFF::OFF
=
NODEB_PRIVATE_INTERFACE_SWITCH::ON
= PTT_SPEC_LI_SWITCH_OFF::OFF
= RNC_DF_2_URA_PCH_SWITCH::OFF
= FD_TAC_MATCH_SWITCH::OFF
=
NONPTT_L1_FAST_SYNC_SWITCH::OFF
=
URAPCH_LAYERED_PAGING_RT_SWITCH::OFF
=
URAPCH_LAYERED_PAGING_NRT_SWITCH::OFF
=
IDLE_LAYERED_PAGING_NRT_SWITCH::OFF
=
IDLE_LAYERED_PAGING_RT_SWITCH::OFF
=
INTELLIGENT_WIFI_DETECT_AND_SELECTION::OFF
=
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH::OFF
= PTUSER_IDENTIFY_SWITCH::OFF
Process Control Switch 2 = LOAD_IRAT_HO_RNC_FILL_TL::OFF
= SEND_IDT_JUDGE_IU_RESET::OFF
=
RNC_RBRECFG_DRD_FAIL_ROLLBACK_SWITCH::ON
=
RNC_CS_QUERY_UE_IMEI_SWITCH::OFF
=
RNC_PS_QUERY_UE_IMEI_SWITCH::ON
= FACH_DTCH_CONGEST_P2D::ON
=
RNC_RBSETUP_DRD_FAIL_ROLLBACK_SWITCH::ON
=
PS_NOTIFYCN_NOTDOWNSIZE_SWITCH::OFF
=
ASU_RSP_TIMEOUT_HANDLE_SWITCH::ON
=
RB_RECFG_USER_INACT_SWITCH::OFF
= RRC_SCRI_NORM_REL_SWITCH::OFF
=
CELLUPT_RLFAILURE_SRBREESTAB_SWITCH::ON
= CU_OVERLAP_DSCR_SWITCH::OFF
= TRB_RST_DSCR_SWITCH::OFF
=
RNC_FD_SCRI_FORCE_REL_SWITCH::ON
= FP_IUUP_TRACE_SWITCH::ON
=
RNC_PCHR_OUTPUT_CTRL_SWITCH::OFF
= DTMF_SWITCH::ON
=
FAST_CS_FB_BASEDON_RIM_SWITCH::OFF
=
L2U_SRVCC_WITH_PS_HO_SWITCH::OFF
= ULTRA_FLASH_CSFB_SWITCH::OFF
=
RNC_PS_QUERY_UE_IMEISV_SWITCH::OFF
=
NRNC_EXTENDED_RNCID_SWITCH::OFF
=
RNC_UE_IMSI_TAC_CORRELATION_SWITCH::OFF
=
REL_NO_PS_RAB_AFTER_ECHO_DETECT_FAIL::OFF
=
LOSSY_RELOCATION_OPT_SWITCH::OFF
=
ECHO_DETECT_FAIL_ALARM_OPT_SWITCH::OFF
= CS_INIT_DT_OPT_SWITCH::OFF
=
RB_CU_OVERLAP_DISCARD_RB_RSP_SWITCH::OFF
Process Control Switch 3 =
FACH_DCCH_CONG_CTRL_SWITCH::OFF
=
RNC_F2D_RLC_SUSPEND_SWITCH::OFF
=
UM_RRCRELCMP_RLDEL_DELAY_SWITCH::ON
= RNC_TVM_BASED_P2D_SWITCH::ON
=
CS_RLFAIL_RRCSETUP_STAT_SWITCH::OFF
=
PS_INACT_NOTREL_FOR_CSPS_SWITCH::ON
= RAB_DL_BITRATE_MOD_SWITCH::OFF
=
RAB_WAIT_IUUP_INIT_RESPONSE_SWITCH::OFF
= CS_CALL_DROP_DEFINITION::OFF
= PS_CALL_DROP_DEFINITION::OFF
=
CCH_ABNORMOLREL_CAUSE_SWITCH::OFF
= RNC_U2U_SWITCH::OFF
=
INTERRAT2U_RESUME_PS_ASAP_SWITCH::OFF
= UE_TRB_RESET_IOT_SWITCH::ON
=
CUC_CMP_NO_ACTIVE_CFN_SWITCH::OFF
=
RNC_RDY_FOR_INTERRAT_COMPATIBLE_SWITCH::OFF
Process Control Switch 4 =
PS_F2D_OVERLAP_CELLUPT_SWITCH::ON
=
AMR_HHO_FAIL_ROLLBACK_SWITCH::ON
= PHY_RECFG_REEST_SWITCH::ON
= IUR_RL_REEST_SWITCH::ON
= RB_SETUP_RL_REEST_SWITCH::ON
= RRC_CONN_SETUP_OPT_SWITCH::ON
= TCP_ACK_ACCELERATOR_SWITCH::ON
=
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITCH::OFF
= SEND_MSG_NULL_SWITCH::ON
= FD_PCH_IUR_CS_OPT_SWITCH::OFF
=
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH::OFF
= CS_HHO_ASYNC_CTRL_SWITCH::ON
= PS_HHO_ASYNC_CTRL_SWITCH::ON
= IUR_HHO_ASYNC_CTRL_SWITCH::ON
=
F2P_DATATRANS_OPTIMIZE_SWITCH::ON
=
IRATHO_HOCANCEL_RL_REEST_SWITCH::ON
= TRB_RESET_RL_REEST_SWITCH::ON
 = RB_REL_RL_REEST_SWITCH::ON
=
RB_SETUP_ENHANCE_RL_REEST_SWITCH::ON
=
RAB_SETUPMOD_CNT_FIX_SWITCH::OFF
=
PCH_UE_RLC_UNRECOVERABLEERROR_SWITCH::OFF
=
FAST_RETURN_LTE_BY_CELL_SELECT_SWITCH::OFF
=
UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH::OFF
=
PHYCHRECFG_ENH_RL_REEST_SWITCH::ON
=
RBRECFG_ENH_RL_REEST_SWITCH::ON
= SMC_STOP_RLC_SWITCH::ON
=
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWITCH::ON
=
CMP_IU_QOS_GTP_PDU_SN_SWITCH::OFF
= DL_TRB_RESET_BUFF_SWITCH::OFF
=
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWITCH::ON
=
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH::ON
Process Control Switch 5 =
INTERRAT_LOAD_SINGLE_RPT_FOR_LTE_SWITCH::OFF
=
INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH::OFF
= UL_EVQI_SWITCH::ON
= DL_EVQI_SWITCH::ON
=
VIDEO_RATE_ADAPTION_SWITCH::OFF
= VOIP_MANAGE_SWITCH::OFF
=
DIFF_SERVICE_ON_TERMINAL_SWITCH::OFF
= APP_GRP_RES_RSV_SWITCH::OFF
= RIM_ON_ECO_SWITCH::OFF
=
PRIMOPER_NONROAM_USER_CN_SA_SWITCH::OFF
=
SRBCHG_DRD_FAST_RB_SETUP_SWITCH::ON
=
SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH::ON
=
FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITCH::OFF
=
WBAMR_HHO_FAIL_ROLLBACK_SWITCH::ON
= EXTD_LAC_PAGING_SWITCH::OFF
= TCP_PROXY_SWITCH::OFF
=
SEAMLESS_CRYSTAL_VOICE_SWITCH::OFF
= CS_RB_PRI_MC_SWITCH::ON
=
L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWITCH::OFF
=
CRYSTAL_VOICE_DEEPCOVER_SWITCH::OFF
= LOAD_BASED_P2D_SWITCH::OFF
=
PS_R99_BLER_STAT_OPT_SWITCH::OFF
=
STATE_FACH_CONSISTENT_OPTI_SWITCH::ON
= D2P_RECFG_REEST_SWITCH::OFF
=
IMPVD_UL_COVER_FOR_SRB_OVER_DCH_SWITCH::OFF
= UL_DT_SAI_PLMN_CMP_SWITCH::OFF
=
RRC_CONN_SETUP_MSG_ENH_OPT_SWITCH::OFF
= UE_UDA_CAP_QUERY_SWITCH::OFF
= UDA_SWITCH::OFF
Reserved parameter 1 = RSVDBIT1_BIT1::OFF
= NAS_QOS_MOD_SWITCH::ON
= RSVDBIT1_BIT3::OFF
= RSVDBIT1_BIT4::OFF
= RSVDBIT1_BIT5::OFF
= RSVDBIT1_BIT6::OFF
= RSVDBIT1_BIT7::OFF
= RSVDBIT1_BIT8::OFF
= RSVDBIT1_BIT9::OFF
= RSVDBIT1_BIT10::OFF
= RSVDBIT1_BIT11::OFF
= RSVDBIT1_BIT12::OFF
= RSVDBIT1_BIT13::OFF
= RSVDBIT1_BIT14::OFF
= RSVDBIT1_BIT15::OFF
= RSVDBIT1_BIT16::OFF
= SYSHO_CSIN_PERMIT_SWITCH::ON
= RSVDBIT1_BIT18::ON
= RSVDBIT1_BIT19::ON
= RSVDBIT1_BIT20::ON
= RSVDBIT1_BIT21::ON
= RSVDBIT1_BIT22::ON
= RSVDBIT1_BIT23::ON
= RSVDBIT1_BIT24::ON
= RSVDBIT1_BIT25::ON
= RSVDBIT1_BIT26::ON
= RSVDBIT1_BIT27::ON
= RSVDBIT1_BIT28::ON
= RSVDBIT1_BIT29::ON
= RSVDBIT1_BIT30::ON
= RSVDBIT1_BIT31::ON
= RSVDBIT1_BIT32::ON
Reserved parameter 2 = RSVDBIT1_BIT1::OFF
= RSVDBIT1_BIT2::OFF
= RSVDBIT1_BIT3::OFF
= RSVDBIT1_BIT4::OFF
= RSVDBIT1_BIT5::OFF
= RSVDBIT1_BIT6::OFF
= RSVDBIT1_BIT7::OFF
= RSVDBIT1_BIT8::OFF
= RSVDBIT1_BIT9::OFF
= RSVDBIT1_BIT10::OFF
= RSVDBIT1_BIT11::OFF
= RSVDBIT1_BIT12::OFF
= RSVDBIT1_BIT13::OFF
= RSVDBIT1_BIT14::OFF
= RSVDBIT1_BIT15::OFF
= RSVDBIT1_BIT16::OFF
 = RSVDBIT1_BIT17::OFF
= RSVDBIT1_BIT18::OFF
= RSVDBIT1_BIT19::OFF
= RSVDBIT1_BIT20::OFF
= RSVDBIT1_BIT21::OFF
= RSVDBIT1_BIT22::OFF
= RSVDBIT1_BIT23::OFF
= RSVDBIT1_BIT24::OFF
= RSVDBIT1_BIT25::OFF
= RSVDBIT1_BIT26::OFF
= RSVDBIT1_BIT27::OFF
= RSVDBIT1_BIT28::OFF
= RSVDBIT1_BIT29::OFF
= RSVDBIT1_BIT30::OFF
= RSVDBIT1_BIT31::OFF
= RSVDBIT1_BIT32::OFF
Reserved parameter 3 = RSVDBIT1_BIT1::ON
= RSVDBIT1_BIT2::ON
= RSVDBIT1_BIT3::ON
= RSVDBIT1_BIT4::ON
= RSVDBIT1_BIT5::ON
= RSVDBIT1_BIT6::ON
= RSVDBIT1_BIT7::ON
= RSVDBIT1_BIT8::ON
= RSVDBIT1_BIT9::ON
= RSVDBIT1_BIT10::ON
= RSVDBIT1_BIT11::ON
= RSVDBIT1_BIT12::ON
= RSVDBIT1_BIT13::ON
= RSVDBIT1_BIT14::ON
= RSVDBIT1_BIT15::ON
= RSVDBIT1_BIT16::ON
= RSVDBIT1_BIT17::ON
= RSVDBIT1_BIT18::ON
= RSVDBIT1_BIT19::ON
= RSVDBIT1_BIT20::ON
= RSVDBIT1_BIT21::ON
= RSVDBIT1_BIT22::ON
= RSVDBIT1_BIT23::ON
= RSVDBIT1_BIT24::ON
= RSVDBIT1_BIT25::ON
= RSVDBIT1_BIT26::ON
= RSVDBIT1_BIT27::ON
= RSVDBIT1_BIT28::ON
= RSVDBIT1_BIT29::ON
= RSVDBIT1_BIT30::ON
= RSVDBIT1_BIT31::ON
= RSVDBIT1_BIT32::ON
DL RAB Bit Rate = 0
CBS message ID = 5000
Iub Private Interface Switch = RL_OpIndex_INCLUDED::OFF
= PSCRR_OpIndex_INCLUDED::OFF
=
RADIO_LINK_IUR_INDICATION_INCLUDED::OFF
Optimization Switch = PAGGING_NUM_CTRL_SWITCH::OFF
= ASU_RL_RESET_SWITCH::ON
= MC_RL_RESET_SWITCH::ON
=
FD_PCH_REENTERSA_FORCE_RRC_REL_SWITCH::ON
 = UE_CRC_COMPATIBLE_SWITCH::OFF
= RNC_P2D_DRD_SWITCH::OFF
= P2D_SWITCH::OFF
=
AMR_F2D_OVERLAP_CELLUPT_SWITCH::ON
= SRB_RESET_RL_SETUP_SWITCH::ON
= RLFAIL_RL_SETUP_SWITCH::ON
= CS_RL_SETUP_SWITCH::ON
= PS_RL_SETUP_SWITCH::ON
= UE_SRB_RESET_SWITCH::ON
= RL_RESTORE_SWITCH::ON
= RNC_EFD_D2F_SWITCH::ON
=
RNC_RB_SCRI_NOT_DROP_SWITCH::ON
= RRC_RECONN_SWITCH::OFF
= RRC_REPEAT_PFM_SWITCH::ON
= F2D_NO_RSP_RRCREL_SWITCH::ON
= CS_SETUP_P2D_SWITCH::ON
= SYSHO_CIPHER_IE_SWITCH::OFF
= P2P_GTPU_NOT_CFG_SWITCH::ON
=
RB_SETUP_CIPHER_TIME_ADJ_SWITCH::ON
= CS_PRI_MOD_NOT_INT_SWITCH::OFF
=
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH::OFF
=
IU_FAULT_REL_PS_RES_SWITCH::OFF
= RB_RECFG_RL_REEST_SWITCH::ON
= F2P_DT_MSG_BUFFER_SWITCH::ON
= SCRI_COMPATIBLE_SWITCH::OFF
= GTPU_ERR_IND_DEF_SWITCH::ON
=
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH::ON
=
UL_INTEG_ALGO_COMPAT_SWITCH::OFF
Optimization Switch2 =
DRNC_DCH_RCV_CELL_RESEL_MSG_DSCR_SWITCH::OFF
=
MULTIRAB_ATTESTAB_DEF_SWITCH::OFF
=
PCH_UE_SRB_RESET_DSCR_SWITCH::OFF
=
DRNC_CELL_CODE_CONFLICT_OPT_SWITCH::ON
= RAB_FAIL_CAUSE_SWITCH::OFF
= PSPS_SETUP_REL_DEF_SWITCH::OFF
=
RRC_CON_REQ_TIMES_COMPATIBLE_SWITCH::ON
= SECU_CU_CROSS_SWITCH::ON
= HHO_CNT_CORRECT_SWITCH::OFF
= IRATHO_CNT_CORRECT_SWITCH::ON
=
RB_CU_CROSS_COMPATIBLE_SWITCH::ON
=
RNTI_ENH_ALLOC_AlGO_SWITCH::OFF
= DRNC_LOAD_CTRL_SWITCH::ON
=
EFACH_CU_COMMON_HRNTI_SWITCH::ON
= PSCS_CALLDROP_FIX_SWITCH::ON
=
CSABNREL_DUETO_PSREL_FIX_SWITCH::ON
= SIG_RL_REEST_SWITCH::OFF
= SIG_SMC_RL_REEST_SWITCH::OFF
= SIG_ASU_RL_REEST_SWITCH::OFF
Function Switch =
RRC_CONN_STATE_TO_NODEB_SWITCH::OFF
= CS_SECMODE_PRI_CSPS_SWITCH::ON
= AMR_SILENT_DETECT_SWITCH::ON
=
IU_FLEX_CONG_DISCARD_SWITCH::OFF
=
DISCONNECT_RL_REEST_ENHANCE_SWITCH::OFF
=
UL_INTEG_ALGO_FOR_CELLUPDATE_SWITCH::ON
= AMRWB_SILENT_DETECT_SWITCH::ON
=
SEROBJCFG_NOT_CMP_ALM_REPORT_SWITCH::OFF
= RRC_MSG_CN_INFO_SWITCH::OFF
=
NRNC_BKCFG_NOT_CMP_ALM_REPORT_SWITCH::OFF
Maximum Paging Times for UEs in CELL_PCH = 5
Maximum Paging Times for UEs in URA_PCH = 5
Optimization Switch3 =
SYS_RELOC_OUT_SUCC_STAT_OPT_SWITCH::ON
=
RL_REEST_PS_ON_FACH_SWITCH::OFF
=
CELLUPDATE_MEASUREMENT_OPT_SWITCH::ON
=
D2F_PROCEDURE_OPTIMIZATION_SWITCH::ON
=
F2D_PROCEDURE_OPTIMIZATION_SWITCH::ON
=
FOREVER_PCH_CTRL_PLANE_SHARE_OPT::OFF
=
FOREVER_PCH_USER_PLANE_SHARE_OPT::OFF
=
RAB_REL_SRV_CELL_CHG_CROSS_SWITCH::ON
=
SCRIWITHCAUSE_OVERLAP_SWITCH::OFF
= P2F_CUC_REPEAT_SWITCH::OFF
=
UU_ABN_REL_INFO_NOTIFY_NODEB_SWITCH::ON
=
D2F_AM_PROCEDURE_OPTIMIZATION_SWITCH::ON
=
AM_D2F_F2D_RESTMR_OPTIMIZATION_SWITCH::ON
= D2P_DT_MSG_BUFFER_SWITCH::ON
=
CM_CODE_CONFLICT_OPT_SWITCH::ON
=
H_SERV_CELL_CHANGE_MSG_OPT_SWITCH::ON
=
FAST_HSDPA_SERV_CELL_CHANGE_SWITCH::ON
=
RLRST_ASU_SUCC_COUNTERS_CORRECT_SWITCH::OFF
=
COUNT_STATE_CHG_BY_RAB_EHN_SWITCH::OFF
=
RAB_RELATED_COUNTER_OPT_SWITCH::ON
=
CELLUPDATE_PROCEDURE_OPT_SWITCH::ON
=
PTT_PAGING_PRD_CRRCT_SWITCH::OFF
=
RRC_REL_STATUS_RSP_RAB_ASS_REQ_SWITCH::ON
= L2U_UP_DELAY_OPT_SWITCH::ON
=
PRI_LDR_SYSHO_OUT_USE_SELECT_OPT_SWITCH::OFF
=
F2D_AFTER_P2F_MEASUREMENT_OPT_SWITCH::OFF
Rate of NBAMR UEs with Noise Detection in the DL = 100
Rate of WBAMR UEs with Noise Detection in the DL = 100
Improvement Switch =
CONVERT_RELOC_FAIL_CAUSE_SWITCH::OFF
=
DELAY_DRNC_CODE_REL_SWITCH::OFF
=
ROUT_IDT_BY_ROUTING_PARA_SWITCH::OFF
=
COUNT_CS_REC_IU_REL_CMD_SWITCH::ON
=
SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH::ON
=
REL_IUR_CCH_BEFORE_DSCR_SWITCH::ON
=
RELOC_CIPHER_PENDING_COMPATI_SWITCH::OFF
=
COUNT_SPECIAL_RAB_ATT_SWITCH::OFF
=
COUNT_STATE_CHG_BY_RAB_SWITCH::OFF
= DELAY_SEND_MEACTRL_SWITCH::ON
= CS_DISCONNECT_OPT_SWITCH::ON
=
NON_DCCC_RBRECFG_RL_REEST_SWITCH::ON
= SMC_RL_REEST_SWITCH::ON
=
PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH::OFF
= PAGING_OM_OPTIMIZE_SWITCH::OFF
=
DEACTIVE_CELLHSPA_H2F_SWITCH::OFF
=
OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH::OFF
=
RAB_SETUP_CNT_CORRECT_SWITCH::ON
=
FACH_DCCH_RRC_REL_NO_RSP_DELAY_USE_URNTI::ON
=
FACH_CCCH_RRC_REL_NO_RSP_DELAY_USE_URNTI::OFF
=
RB_SETUP_RLC_INFO_OPT_SWITCH::OFF
=
DCH_DISCARD_CELL_RESEL_CU_MSG_SWITCH::OFF
=
SYS_INIT_SPU_STATE_BROADCAST_OPT_SWITCH::ON
=
RB_RECFG_F2D_ISR_IC_FAIL_RRC_REL_SWITCH::ON
=
PTT_RAB_SETUP_ATT_CNT_CORRECT_SWITCH::OFF
=
P2D_DRD_FAIL_BACK_RESEL_CELL_SWITCH::OFF
=
TRB_RST_CU_NOT_REEST_UM_RLC_TRB_SWITCH::OFF
=
ONE_CNNODE_SCCP_CONG_SEL_OTHER_SWITCH::ON
= CSFB_UE_DELAY_RAU_SWITCH::OFF
=
CSFB_UE_CS_IMEI_QUERY_DISABLE_SWITCH::OFF
Paging Type 1 Resending Times for PCH UE Release = 3
Optimization Switch4 =
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH::ON
=
RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_SWITCH::OFF
= DRNC_RL_REEST_OPT_SWITCH::ON
=
URA2FACH_OVERLAP_CELLUPT_PROC_SWITCH::OFF
=
RB_SETUP_F2D_USE_AM_RLC_SWITCH::ON
=
RB_RECFG_D2F_USE_AM_RLC_SWITCH::ON
=
RB_RECFG_F2D_USE_AM_RLC_SWITCH::ON
=
RRC_UE_USER_SMOOTH_OPT_SWITCH::ON
= TRNC_LOAD_CTRL_SWITCH::OFF
=
IU_SIG_REL_PCH_PAGING_SWITCH::OFF
= CPC_OPT_FOR_RLSETUP_SWITCH::ON
=
D2P_L2DEACT_FAIL_OPT_SWITCH::OFF
= EFACH_RRC_REG_CMP_SWITCH::OFF
=
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH::OFF
=
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWITCH::ON
=
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITCH::OFF
= SCM_CU_CROSS_SWITCH::ON
= DRNC_HSPA_CM_OPT_SWITCH::OFF
= IUB_TRANSID_OPT_SWITCH::OFF
= ASYN_RL_REEST_OPT_SWITCH::ON
= RNC_IMSI_HO_OPT_SWITCH::OFF
=
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWITCH::OFF
=
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWITCH::OFF
=
PAGING_OVERLAP_CU_OPT_SWITCH::ON
=
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH::ON
=
SOCKET_RECEIVE_DATA_CORRECT_SWITCH::ON
=
CU_PRI_OVERLAP_OTHER_PROC_SWITCH::OFF
=
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH::ON
=
CS_PAGING_OVERLAP_RRC_OPT_SWITCH::OFF
=
INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH::OFF
=
DRNC_RL_PARA_UPT_OPT_SWITCH::ON
Optimization Switch5 =
U2L_RELOC_MSG_TAKE_ERAB_SWITCH::OFF
=
PS_DOMAIN_REL_RAB_SETUP_SWITCH::OFF
=
PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH::OFF
=
GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH::OFF
=
D2P_TWO_SIDE_RLC_REEST_SWITCH::ON
=
D2F_SRNS_CONTEXT_REQ_OPT_SWITCH::OFF
=
DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH::ON
= DSP_CAP_JUDGE_SWITCH::ON
=
RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH::ON
=
RB_RFG_MSG_USE_NEW_SG_SWITCH::OFF
=
SRB3_SRB4_RLC_RST_RRC_REL_SWITCH::OFF
=
WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM_SWITCH::OFF
=
PS_0K_STATIC_RELOC_IN_CMP_SWITCH::OFF
=
ADD_DRL_PS_0K_TO_8K_SWITCH::OFF
= CU_AL_RES_OPT_SWITCH::OFF
=
DRNC_SERV_CELL_CHG_BUGFIX_SWITCH::OFF
=
TRNC_TPC_INDEX_ALLOC_SWITCH::ON
= IUR_ATM_TRAN_OPT_SWITCH::OFF
=
RELOC_REQ_CIPHER_COMP_SWITCH::OFF
=
STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWITCH::ON
=
RNC_IN_POOL_IU_RESET_SWITCH::ON
=
USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH::ON
=
RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_SWITCH::OFF
=
PS_U2L_USER_PLANE_DELAY_OPT_SWITCH::OFF
=
P2F_CU_CAUSE_CHG_OPT_SWITCH::OFF
=
P2F_REDIRECT_CELLUPDT_RESEND_OPT_SWITCH::OFF
=
RELOC_IN_PROCESS_OPT_SWITCH::OFF
= CU_ROUT_OPT_SWITCH::OFF
=
RRC_REL_CROSS_DETACH_INIT_SWITCH::OFF
 Optimization Switch6 =
FACH_RB_REL_CU_CROSS_OPT_SWITCH::OFF
= CMCF_CHECK_CMP_SWITCH::OFF
= ASU_RSP_FAIL_REL_UE::ON
= CELL_PCH_UES_OPT_SWITCH::OFF
=
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH::OFF
=
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SWITCH::OFF
=
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH::OFF
=
IUB_TRM_PREALLOC_OPT_SWITCH::OFF
= SRB_EDCH_RECFG_OPT_SWITCH::OFF
=
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH::OFF
=
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG::OFF
=
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH::OFF
=
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITCH::OFF
= RL_PROCEDURE_OPT_SWITCH::OFF
= CU_OVERLAP_OPT_SWITCH::OFF
=
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_SWITCH::OFF
= ADJUST_CNID_WITH_CN::OFF
=
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET::OFF
= CS_TRIG_PS_F2D_SWITCH::OFF
=
DEAL_RL_RECFG_CORRECT_SWITCH::OFF
=
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWITCH::OFF
=
CODE_CONFLICT_RL_REEST_SWITCH::ON
=
RELOC_IN_AMR_NOISE_DETECT_SWITCH::ON
=
CMP_NO_ACTIVE_CFN_OPT_SWITCH::ON
=
NON122_AMR_HHO_ROLLBACK_SWITCH::ON
=
VQI_AFTER_DT_CONNECT_SWITCH::OFF
=
FACH_CU_RELOC_RB_MSG_COMP_SWITCH::OFF
=
SRNS_PROCEDURE_OPTIMIZE_SWITCH::OFF
=
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWITCH::OFF
=
DRNC_BUFF_RL_RECFG_PREP_SWITCH::OFF
=
PS_DCH0K_RB_MSG_OPT_SWITCH::OFF
=
PS_DSCR_IU_REL_COMPATIBLE_SWITCH::ON
UL Integrity Protection Fail Tolerance Times = 3
Optimization Switch7 =
F2PU_RESELECT_CU_OVERLAP_SWITCH::OFF
 =
F2PU_DATATRANS_CU_OVERLAP_SWITCH::OFF
= F2P_USE_AM_RLC_SWITCH::OFF
= FACH_OUTOFSER_OPT_SWITCH::ON
= P2D_PREPFAIL_OPT_SWITCH::OFF
=
URA_PCH_RESEL_CU_OPT_SWITCH::OFF
=
D2F_ABNORMAL_FORCETOFACH_SWITCH::ON
=
RLFAIL_OR_TRBRST_D2F_RLREEST_SWITCH::ON
= UE_DCH_CU_RL_REEST_SWITCH::ON
=
CS_RB_SETUP_RL_REEST_SWITCH::ON
=
PS_RB_SETUP_RL_REEST_SWITCH::ON
=
RBSETUP_RLREEST_RABSETUPCNT_CORRECT::OFF
=
RBSETUP_UEDCHCU_RABSETUPCNT_CORRECT::OFF
=
PROC_FOREC_SUCC_COUNTER_OPT_SWITCH::OFF
=
FD_SCRI_RCV_IN_RRC_PROC_OPT_SWITCH::ON
=
INNER_CBC_ENCODE_OPT_SWITCH::OFF
=
PLMNID_OPT_IN_RELOC_RQD_SWITCH::OFF
= RB_PROCEDURE_OPT_SWITCH::ON
=
PLATINUM_TMSI_BROADCAST_OPT_SWITCH::OFF
=
SPECUSER_FAST_RBCFG_OPT_SWITCH::OFF
=
RB_SETUP_F2D_CU_CROSS_OPT_SWITCH::ON
=
RESTORE_DISCARD_RAB_ASSIGN_REQ_SWITCH::OFF
= IUR_SIG_E2D_OPT_SWITCH::OFF
=
RAB_SETUP_ATT_R99_CNT_CORRECT_SWITCH::OFF
=
SRB_OVER_HSDPA_CFN_CORRECT_SWITCH::ON
=
CS_RAB_SETUP_DRD_OPT_SWITCH::OFF
=
SERVICE_QUALITY_MEAS_OPT_SWITCH::ON
=
IRATHO_HO_OUT_PROCEDURE_OPT_SWITCH::OFF
=
IUB_ATM_IP_RL_RECFG_OPT_SWITCH::ON
=
ACTIVE_CMCF_FAIL_RL_REEST_SWITCH::OFF
=
PFM_PS_CELLDCHUES_PLMN_OPTI_SWITCH::OFF
=
RL_REEST_TRIGGER_MSG_OPT_SWITCH::OFF
User Selection for Video Prioritization = PLATINUM_USER::OFF
Optimization Switch8 =
PS_RAB_REL_GTPU_RESOURCE_UNAVAILABLE::OFF
 =
MNTN_TWO_PENDING_INTEGRITY_CFG_SWITCH::OFF
=
DCCC_HHO_CU_NO_CHANGING_GTPU_IP_SWITCH::OFF
=
RAB_MODIFY_NO_CHANGING_GTPU_IP_SWITCH::OFF
=
IUR_F2P_P2P_OVERLAP_CU_TRIG_DSCR_SWITCH::OFF
=
STATE_TRANS_COUNT_OPT_SWITCH::OFF
= CU_RB_CFG_OPT_SWITCH::OFF
=
SEND_RNSAP_RESET_AGAIN_SWITCH::OFF
=
SYS_HO_RELOC_CMP_OPT_SWITCH::OFF
= CSPS_SYS_HO_IN_SMC_SWITCH::OFF
=
MOCN_REDIR_GET_SPID_OPT_SWITCH::ON
=
DCH_DISCARD_NONDCH_CU_MSG_SWITCH::OFF
=
CMCF_ACTIVE_RECFG_REEST_SWITCH::ON
=
DCH_RB_REL_CU_OVERLAP_OPT_SWITCH::ON
=
FACH_SRNS_CONTEXT_REQ_OPT_SWITCH::OFF
=
CSFB_USER_IDENTIFY_OPT_SWITCH::OFF
=
F2D_RBSETUP_CU_OVERLAP_OPT_SWITCH::OFF
=
INIT_DT_OVERLAP_CU_OPT_SWITCH::OFF
=
SRVCC_RELOC_IN_CIPHER_OPT_SWITCH::OFF
=
RLREEST_RAB_SETUPFAIL_CNT_FIX_SWITCH::OFF
=
MOCN_SAME_DOMAIN_DISC_INIT_DT_SWITCH::OFF
= RL_PROCEDURE_OPT_SWITCH2::OFF
=
RABSETUP_OVERLAP_CU_RELOC_OPT_SWITCH::ON
= RL_CNT_OPT_SWITCH::OFF
=
TRNC_RELOC_IN_SUCC_OPT_SWITCH::OFF
=
RELOC_ACK_WAIT_IUUP_INIT_SWITCH::ON
=
ASU_CU_CROSS_OPT_ENH_SWITCH::ON
= RB_RL_REEST_OPT_ENH_SWITCH::ON
= DCH_CU_CHGCELL_OPT_SWITCH::ON
= RELOC_SILENT_DETECT_SWITCH::ON
=
RL_FAIL_SUSP_SHO_DEL_SWITCH::OFF
Process Control Switch6 =
RLCBUF_PDU_CALCU_IN_ACTIVE_TIME_SWITCH::OFF
=
STORE_MC_IN_UU_CFG_PROCEDURE_SWITCH::OFF
=
PCHR_STORE_ACT_TIME_INFO_SWITCH::OFF
 =
SRNS_WITH_CSFB_IND_ACK_SWITCH::OFF
=
PAGING_CROSS_RELPROC_OPT_SWITCH::OFF
= RRC_SETUP_DSCR_OPT_SWITCH::OFF
= ASYN_START_CM_SWITCH::OFF
=
R8FD_IMEITAC_ENABLE_SWITCH::OFF
= ABNORM_D2EFACH_OPT_SWITCH::OFF
=
EFACH_RBSETUP_F2D_CU_OVERLAP_SWITCH::OFF
=
HHO_ASYNC_RBRECFG_TIMEOUT_OPT_SWITCH::OFF
=
EFACH_CS_TRIG_PS_F2D_SWITCH::OFF
=
L2U_SRVCC_PS_NUMOUT_CS_RELOC_IN_SWITCH::OFF
=
DRNC_RLCC_WITH_ASU_OPT_SWITCH::OFF
= EFACH_RRC_CMP_OPT_SWITCH::OFF
=
EFACH_RRC_MSG_MACHS_RESET_SWITCH::OFF
=
EFACH_PCH2PCH_CU_TIMEOUT_DSCR_SWITCH::OFF
=
VOIP_IP_PORT_QOS_ENH_SWITCH::OFF
=
RB_SETUP_ROLLBACK_FAIL_PFM_OPT_SWITCH::OFF
=
STORE_MC_IN_UU_CFG_PRO_ENH_SWITCH::OFF
=
VIP_FULL_MOSINFO_AUTOTRACE_SWITCH::OFF
=
RNC_UE_IMSI_TAC_CORRELATION_OPT_SWITCH::OFF
Optimization Switch9 =
MULTI_CSRAB_RBINVCFG_OPT_SWITCH::ON
=
RNSAP_TRANS_ADDR_CHECK_SWITCH::OFF
=
NON_WAIT_UE_RESP_RNC_ABNORMAL_OPT_SWITCH::OFF
=
DCCC_P2F_COUNTER_OPT_SWITCH::OFF
=
CORRECT_CELL_RAB_REL_COUNTER_SWITCH::OFF
=
CU_RAB_NON_RB_PROC_OPT_SWITCH::OFF
=
ERGCH_EHICH_INFO_OPT_SWITCH::OFF
=
IUR_RL_REESTABLISHMENT_OPT_SWITCH::OFF
= CU_SRB_REEST_RLC_RECFG_OPT::ON
=
NON_UU_RLRSP_RL_RESET_SWTICH::OFF
= IUR_CMCH_OPT_SWITCH::OFF
=
INTERRAT_HO_DATAFWD_TIMER_OPT_SWITCH::OFF
=
DSCR_RLREL_AFTER_RRC_REL_COMPLETE::OFF
=
RNC_SUP_RELOC_CANCEL_WHEN_INTERRUPT::ON
=
PS_RAB_MODIFY_RL_REEST_FIX_SWITCH::ON
=
CS_TRIG_PS_F2D_CNT_FIX_SWITCH::OFF
=
MAINTAIN_TWO_INTEGPROT_PARA_SWITCH::ON
=
RAB_ASSGINMENT_ATTEMPT_CORRECT_SWITCH::OFF
=
IUB_HSDSCH_USER_PRIORITY_SEND_SWITCH::ON
=
CSFB_RAU_DELAY_FOR_REG_SWITCH::OFF
=
RAB_NORMREL_UEGEN_COUNTER_FIX_SWITCH::OFF
=
REC_FAST_RETURN_IN_PREV_PINGPONG_SWITCH::OFF
=
IUR_SEAMLESS_PAGING_OPT_SWITCH::OFF
= PS_RB_PDP_PARALLEL_SWITCH::OFF
=
FIX_CSFB_USER_IDENTIFY_SWITCH::OFF
=
WAITING_FOR_CN_REL_MSG_TIMER_OPT_SWITCH::OFF
=
PAGING_OVERLAP_CU_ENH_OPT_SWITCH::OFF
=
CS_RAB_REL_U2L_TRIG_ORDER_OPT_SWITCH::OFF
=
RB_FAST_SETUP_FAIL_COUNTER_OPT_SWITCH::OFF
=
IUR_RL_RSP_NON_DRNTI_OPT_SWITCH::OFF
= MOCN_RIM_PLMN_OPT_SWITCH::ON
Improvement Switch2 = CSFB_DELAY_OPT_ENH_SWITCH::OFF
=
NODEB_RL_VIP_NOTIFY_SWITCH::OFF
= CIPHER_TIME_ADJ_OPT_SWITCH::ON
Estimated Num. of DT MSG During Re-locations = 0
Optimization Switch10 =
SECU_CU_CROSS_IP_OPT_SWITCH::OFF
= RRC_REL_REDIR_OPT_SWITCH::OFF
=
RL_RESET_OVERLAP_CU_OPT_SWITCH::OFF
=
UNSTABLE_PREEMPTED_USER_REL_OPT_SWITCH::OFF
=
IUFLEX_CS_IMSI_PAGING_UE_COMPAT_SW::OFF
=
PCH_DISABLED_USE_EFD_SWITCH::OFF
=
CS_PAGING_OVERLAP_RRC_EST_SWITCH::OFF
=
CS_PAGING_OVERLAP_DSCR_SWITCH::OFF
=
FACH_CU_WITH_CRNTI_OPT_SWITCH::OFF
= RL_PROCEDURE_OPT_SWITCH3::OFF
=
FACH_IUR_CU_CELL_RES_ALOC_SWITCH::OFF
=
RAB_FAST_RB_SETUP_ACTCFG_OPT_SWITCH::OFF
=
EFD_D2P_SEND_PAGING_OPT_SWITCH::OFF
=
SRB_OVER_HSPA_OPT_BASED_RLREEST_SWITCH::OFF
=
HO_SS_USER_IDENTIFY_SWITCH::OFF
=
RRC_REJ_TNLFAIL_CNT_SWITCH::OFF
= FIX_PFM_SYSOUT_FAIL_SWITCH::ON
=
RL_REEST_COUNTER_CORRECT_SWITCH::OFF
=
RRC_REPEAT_REQ_CNT_CORRECT_SWITCH::OFF
=
RB_CU_OVERLAP_SRB_REEST_OPT_SWITCH::OFF
= SIG_SECU_CU_CROSS_SWITCH::OFF
= URA_PCH_PAGING_OPT_SWITCH::OFF
=
ULTRAFAST_CS_NAS_BUF_FAIL_OPT_SWITCH::OFF
=
UE_CAP_OVER_LEN_OPT_SWITCH::OFF
=
IRATHO_DISCONNECT_CS_SWITCH::OFF
=
IRATHO_RRC_RELEASE_REDIRECTION_PS_SWITCH::OFF
=
IRATHO_RETURN_CNT_CORRECT_PS_SWITCH::OFF
=
RRC_REL_NAS_CONFLICT_OPT_SWITCH::OFF
=
URA_PCH_PAGING_OPINDEX_OPT_SWITCH::OFF
= RAB_MODIFY_AL_OPT_SWITCH::OFF
=
IRATHO_HOCANCEL_RL_REEST_FIX_SWITCH::OFF
=
INTER_RAT_HO_ATTEMPT_OPT_SWITCH::OFF
Optimization Switch11 =
HO_FROM_U_FAILURE_TID_NOCHK_SWITCH::OFF
=
IRATHO_OUT_PROCEDURE_OPT_SWITCH::OFF
=
CSPS_DSCR_DATA_FORWARD_SUCC_SWITCH::OFF
=
RELOC_REQ_WITH_CORRECT_CRNTI_SWITCH::OFF
=
IUR_CU_FAIL_PROC_OPT_SWITCH::OFF
=
D2F_OVERLAP_FACH_CU_OPT_SWITCH::OFF
=
CS_CIPHER_BASE_TIME_PARA_FIX_SWITCH::OFF
=
DSCR_DELAY_RLDEL_OPT_SWITCH::OFF
=
L2_ENHANCE_RECFG_OPT_SWITCH::OFF
=
CS_AND_PS_REG_CO_REDIR_ATT_FLAG_SWITCH::OFF
=
CSPS_SRB_OVER_H_ACT_TIME_CORRECT_SWITCH::ON
 =
CSPS_SRB_OVER_HSDPA_CFN_CORRECT_SWITCH::ON
=
CSFB_UE_DELAY_RAU_ENHANCE_SWITCH::OFF
=
D2F_CROSS_RLCFAIL_CU_OPT_SWITCH::OFF
=
UE_REL_BELOW_R5_P2D_DISABLE_SWITCH::OFF
= DRNC_RL_OPT_SWITCH::OFF
=
FP_FAILURE_RL_REEST_SWITCH::OFF
=
CSPS_PS_RB_DRD_FAIL_ROLLBACK_SWITCH::OFF
=
RAB_SETUP_OVERLAP_IU_REL_STAT_OPT_SW::OFF
=
IU_REL_DEL_BUFFER_MSG_SWITCH::OFF
=
GSM_SYSOUT_RELOC_CANCEL_OPT_SWITCH::OFF
=
ICR_CELL_IUR_CU_OPT_SWITCH::OFF
=
RAB_ESTAB_STAT_WITHOUT_IRAT_DR_SWITCH::OFF
=
IU_REL_COMMAND_MSG_DELAY_OPT_SWITCH::OFF
=
DSCR_RRC_REL_RESEND_OPT_SWITCH::OFF
=
RELOCATION_PROCESS_PLMN_OPT_SWITCH::OFF
=
UE_CAP_OVER_LEN_PSHO_OPT_SWTICH::OFF
=
RELOC_PREP_CROSS_IU_REL_CMD_OPT_SW::OFF
=
CSFB_ACCESS_DELAY_MEAS_OPT_SWITCH::OFF
=
PS_PAGING_OM_OPTIMIZE_SWITCH::OFF
=
GARBLED_VOICE_CFN_ACTIVETIME_OPT_SWITCH::ON
=
SHO_DEL_RL_CROSS_FP_FAIL_IND_OPT_SW::OFF
Optimization Switch12 = RL_PROCEDURE_OPT_SWITCH4::OFF
=
RB_CONFIG_OVERLAP_CU_OPT_SWITCH::OFF
=
CELL_RRC_REPEAT_REQ_CNT_CORRECT_SW::OFF
= F2D_TXPWR_INCREASE_SWITCH::OFF
= PCH_OUTOFSER_OPT_SWITCH::ON
= IFHO_ATT_COUNT_OPT_SWITCH::OFF
=
RNC_OBTAIN_ACTIVETIME_REF_CFN_OPT_SW::ON
=
AAL2_MOD_PROCEDURE_OPT_SWITCH::OFF
=
SHO_CU_CROSS_COUNTERS_OPT_SWITCH::OFF
=
SERVCELLCHG_CU_CROSS_COUNTERS_OPT_SWITCH::OFF
=
RELOC_SMC_SRB3_SRB4_SN_CORRECT_SWITCH::OFF
 = CN_CFG_CONSISTENCY_CHK_SW::OFF
= N302_PROCESS_OPT_SWITCH::OFF
= U2L_PS_HO_OPT_SWITCH::OFF
=
DIRECT_TRANSFER_PLMNID_LAC_OPT_SWITCH::OFF
= L2U_HO_CMP_OPT_SWITCH::OFF
=
DCH_CU_OVERLAP_CU_OPT_SWITCH::OFF
=
DCCC_OVERLAP_IUR_CELLUPT_OPT_SWICTH::OFF
=
PCH_CELLUPT_FAIL_ROLLBACK_OPT_SWITCH::OFF
=
D2F_OVERLAP_IUR_EFACH_CELLUPT_OPT_SWITCH::OFF
= CS_SETUP_P2D_OPT_SWITCH::OFF
=
ORIG_CALL_CS_RAB_PRE_RSP_SWITCH::OFF
=
CSFB_FAST_RETURN_EHN_OPT_SWITCH::OFF
=
CU_RELOC_MUTLI_SCCPCH_OPT_SWITCH::OFF
=
FMA_PS_CALLDROP_OPT_SWITCH::OFF
= AMRBLER_AFTER_CONN_SWITCH::OFF
=
RELOC_REQ_CSPS_CIPHER_OPT_SWITCH::OFF
=
U2L_CSFB_UNSTABLE_FAST_RETURN_OPT_SWITCH::OFF
=
DRNC_SERVER_LINK_CHANGE_OPT_SWITCH::OFF
=
IMSI_ROUTING_PROCESS_OPT_SWITCH::OFF
=
RB_OVERLAP_RRC_REQ_RAB_CNT_OPT_SWITCH::OFF
=
AMR_AVERAGE_DELAY_OPT_SWITCH::ON
Short Call Detect Threshold = 6
Smart TFRC UE Cluster Mode = OFF
Smart Traffic Cluster Mode = OFF
License Share Ratio for ICR = 0
Optimization Switch13 =
MOCN_RECONSTRUCT_IU_REL_OPT_SWITCH::OFF
=
U2L_SRVCC_FAST_RETURN_PROC_OPT_SWITCH::OFF
=
SEROBJ_NOT_CMP_ALM_RPT_OPT_SWITCH::OFF
= IU_REL_PROCESS_OPT_SWITCH::OFF
=
IU_RELEASE_OVERLAP_RLREEST_OPT_SWITCH::OFF
=
RRC_CONN_SETUP_PARALLEL_OPT_SWITCH::OFF
=
ASYNC_PROCEDURE_OPT_SWITCH::OFF
=
G2U_NO_ENCRY_PARA_OPT_SWITCH::OFF
= EXTEND_NRNCID_OPT_SWITCH::OFF
=
UPLINK_COORDINATING_RL_OPT_SWITCH::OFF
=
EMERGENCY_CALL_TRACE_SWITCH::OFF
= BUFFER_MSG_OPT_SWITCH::OFF
(Number of results = 1)

--- END

LST UUPCTRLSWITCH:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:00:39
O&M #1866501
%%/*1879304611*/LST UUPCTRLSWITCH: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List User Plane Control Switch

------------------------------
Logical RNC ID = 655
Service Apperceive Switch = ON
TPE Switch = TPE_DOWNLINK_SWITCH::OFF
= TPE_UPLINK_SWITCH::OFF
Seamless Crystal Voice QE Threshold = 205
Qos Switch =
FACH_ICMP_ACCELERATOR_SWITCH::OFF
Power Offset of ICMP Rsp on FACH = 0
TCP Proxy Initial Transmission Threshold = 400
TCP Proxy Mean Buffer Threshold = 200
UL RTT Delay Threshold = 20
Target Initial Buffer Delay for Video Service = 10
Prioritize Video Services with Configured Protocol ID = OFF
TCP Proxy Process Control Switch = RLC_TCP_UNFC_SWITCH::OFF
= SACK_ENHANCE_SWITCH::OFF
Optimization Switch =
UL_NBAMR_TRANSCODER_BASE_SILENCE_SWITCH::OFF
=
RELOC_IN_RLC_OPTI_SWITCH::OFF
=
ASYNC_RECFG_OPTIMIZE_SWITCH::OFF
=
AMR_RECFG_VQI_EVQI_STAT_SWITCH::OFF
=
ABNORMAL_REL_OPT_SWITCH::OFF
=
IUUP_SEND_CONTROLBIT_SWITCH::OFF
=
DELAYED_SENDING_ALIGNMENT_OPT_SWITCH::OFF
=
COMBINED_BE_TFCS_SELECT_OPT_SWITCH::OFF
=
HSPA_USER_THR_STAT_OPT_SWITCH::OFF
Process Control Switch = DSCP_MAP_SWITCH::OFF
=
ONLINE_VIDEO_UE_MEASURE_SWITCH::OFF
=
U2L_DATA_FORWARDING_PROC_SWITCH::OFF
Uplink Data Acceleration Mode =
COMPRESS_HEADER_AND_PAYLOAD
Uplink Data Acceleration Memory Size = D4096
D2F Tail PDU Acceleration Number = 22
Signal Error Ratio on RACH Drop Threshold = 20
(Number of results = 1)

--- END

SET UUPCTRLSWITCH:LOGICRNCID=655,OPTIMIZATIONSWITCH=ASYNC_RECFG_OPTIMIZE_SWITCH-1;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:01:22
O&M #1866511
%%/*1879304612*/SET UUPCTRLSWITCH:
LOGICRNCID=655,OPTIMIZATIONSWITCH=ASYNC_RECFG_OPTIMIZE_SWITCH-1;%%
RETCODE = 0 Execution succeeded.

--- END

LST UUPCTRLSWITCH:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:01:28
O&M #1866516
%%/*1879304613*/LST UUPCTRLSWITCH: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List User Plane Control Switch

------------------------------
Logical RNC ID = 655
Service Apperceive Switch = ON
TPE Switch = TPE_DOWNLINK_SWITCH::OFF
= TPE_UPLINK_SWITCH::OFF
Seamless Crystal Voice QE Threshold = 205
Qos Switch =
FACH_ICMP_ACCELERATOR_SWITCH::OFF
Power Offset of ICMP Rsp on FACH = 0
TCP Proxy Initial Transmission Threshold = 400
TCP Proxy Mean Buffer Threshold = 200
UL RTT Delay Threshold = 20
Target Initial Buffer Delay for Video Service = 10
Prioritize Video Services with Configured Protocol ID = OFF
TCP Proxy Process Control Switch = RLC_TCP_UNFC_SWITCH::OFF
= SACK_ENHANCE_SWITCH::OFF
Optimization Switch =
UL_NBAMR_TRANSCODER_BASE_SILENCE_SWITCH::OFF
=
RELOC_IN_RLC_OPTI_SWITCH::OFF
=
ASYNC_RECFG_OPTIMIZE_SWITCH::ON
=
AMR_RECFG_VQI_EVQI_STAT_SWITCH::OFF
=
ABNORMAL_REL_OPT_SWITCH::OFF
=
IUUP_SEND_CONTROLBIT_SWITCH::OFF
=
DELAYED_SENDING_ALIGNMENT_OPT_SWITCH::OFF
=
COMBINED_BE_TFCS_SELECT_OPT_SWITCH::OFF
=
HSPA_USER_THR_STAT_OPT_SWITCH::OFF
Process Control Switch = DSCP_MAP_SWITCH::OFF
=
ONLINE_VIDEO_UE_MEASURE_SWITCH::OFF
=
U2L_DATA_FORWARDING_PROC_SWITCH::OFF
Uplink Data Acceleration Mode =
COMPRESS_HEADER_AND_PAYLOAD
Uplink Data Acceleration Memory Size = D4096
D2F Tail PDU Acceleration Number = 22
Signal Error Ratio on RACH Drop Threshold = 20
(Number of results = 1)

--- END

LST UPTTPARAM:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:01:54
O&M #1866518
%%/*1879304614*/LST UPTTPARAM: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List PTT Parameters

-------------------
Logical RNC ID = 655
Layer 1 Fast Synchronization Switch = ON
PTT Paging Message Resending Times = 2
PTT CELL UPDATE CONFIRM Message Resending Timer = 320
PTT CELL UPDATE CONFIRM Message Resending Times = 2
PTT User Little Target Retransmission Adjustment Switch = OFF
Load Based PTT UE CQI Cycle Adjustment Switch = OFF
(Number of results = 1)

--- END

SET UPTTPARAM:LOGICRNCID=655,PTTSMLRETNUMADJSW=ON;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:02:32
O&M #1866524
%%/*1879304615*/SET UPTTPARAM: LOGICRNCID=655,PTTSMLRETNUMADJSW=ON;%%
RETCODE = 0 Execution succeeded.

--- END

LST UPTTPARAM:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:02:38
O&M #1866526
%%/*1879304616*/LST UPTTPARAM: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List PTT Parameters

-------------------
Logical RNC ID = 655
Layer 1 Fast Synchronization Switch = ON
PTT Paging Message Resending Times = 2
PTT CELL UPDATE CONFIRM Message Resending Timer = 320
PTT CELL UPDATE CONFIRM Message Resending Times = 2
PTT User Little Target Retransmission Adjustment Switch = ON
Load Based PTT UE CQI Cycle Adjustment Switch = OFF
(Number of results = 1)

--- END

LST UQUALITYMEAS:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:02:57
O&M #1866528
%%/*1879304617*/LST UQUALITYMEAS: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List RNC-Oriented QoS Quality Measurement Parameters

----------------------------------------------------
Logical RNC ID = 655
AMR Trigger Time 6A1 = D320
AMR Trigger Time 6A2 = D320
AMR Trigger Time 6B1 = D320
AMR Trigger Time 6B2 = D320
AMR Trigger Time 6D = D240
VP Trigger Time 6A1 = D640
VP Trigger Time 6B1 = D640
VP Trigger Time 6D = D240
BE Trigger Time 6A1 = D640
BE Trigger Time 6B1 = D2560
BE Trigger Time 6A2 = D1280
BE Trigger Time 6B2 = D1280
BE Trigger Time 6D = D240
UL Measurement Filter Coefficient = D19
DL TCP Measurement Filter Coefficient = D1
AMR Trigger Time of Event E = 64
AMR Reporting Period Unit for Event E = TEN_MSEC
AMR Event E Reporting Period = 480
AMR Event E Reporting Period minute = <NULL>
VP Trigger Time of Event E = 64
VP Reporting Period Unit for Event E = TEN_MSEC
VP Event E Reporting Period = 480
VP Event E Reporting Period minute = <NULL>
BE Trigger Time of Event E = 64
BE Reporting Period Unit for Event E = TEN_MSEC
BE Event E Reporting Period = 480
BE Event E Reporting Period minute = <NULL>
BE Trigger Time of Event F = 64
BE Reporting Period Unit for Event F = TEN_MSEC
BE Event F Reporting Period = 480
BE Event F Reporting Period minute = <NULL>
BE Abnormal AI-based Ea Thld = 2
BE Abnormal AI-based Eb Thld = 2
BE Abnormal AI-based Event E Trigger Time = 640
Event Ea Threshold for HSFDPCH = 10
Event Eb Threshold for HSFDPCH = 14
Event Ea Threshold for HSDPCH = 10
Event Eb Threshold for HSDPCH = 14
(Number of results = 1)

--- END

SET UQUALITYMEAS:LOGICRNCID=655,ULBETRIGTIME6B2=D5000;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:03:38
O&M #1866534
%%/*1879304618*/SET UQUALITYMEAS: LOGICRNCID=655,ULBETRIGTIME6B2=D5000;%%
RETCODE = 0 Execution succeeded.

--- END

LST UQUALITYMEAS:LOGICRNCID=655;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:03:44
O&M #1866537
%%/*1879304619*/LST UQUALITYMEAS: LOGICRNCID=655;%%
RETCODE = 0 Execution succeeded.

List RNC-Oriented QoS Quality Measurement Parameters

----------------------------------------------------
Logical RNC ID = 655
AMR Trigger Time 6A1 = D320
AMR Trigger Time 6A2 = D320
AMR Trigger Time 6B1 = D320
AMR Trigger Time 6B2 = D320
AMR Trigger Time 6D = D240
VP Trigger Time 6A1 = D640
VP Trigger Time 6B1 = D640
VP Trigger Time 6D = D240
BE Trigger Time 6A1 = D640
BE Trigger Time 6B1 = D2560
BE Trigger Time 6A2 = D1280
BE Trigger Time 6B2 = D5000
BE Trigger Time 6D = D240
UL Measurement Filter Coefficient = D19
DL TCP Measurement Filter Coefficient = D1
AMR Trigger Time of Event E = 64
AMR Reporting Period Unit for Event E = TEN_MSEC
AMR Event E Reporting Period = 480
AMR Event E Reporting Period minute = <NULL>
VP Trigger Time of Event E = 64
VP Reporting Period Unit for Event E = TEN_MSEC
VP Event E Reporting Period = 480
VP Event E Reporting Period minute = <NULL>
BE Trigger Time of Event E = 64
BE Reporting Period Unit for Event E = TEN_MSEC
BE Event E Reporting Period = 480
BE Event E Reporting Period minute = <NULL>
BE Trigger Time of Event F = 64
BE Reporting Period Unit for Event F = TEN_MSEC
BE Event F Reporting Period = 480
BE Event F Reporting Period minute = <NULL>
BE Abnormal AI-based Ea Thld = 2
BE Abnormal AI-based Eb Thld = 2
BE Abnormal AI-based Event E Trigger Time = 640
Event Ea Threshold for HSFDPCH = 10
Event Eb Threshold for HSFDPCH = 14
Event Ea Threshold for HSDPCH = 10
Event Eb Threshold for HSDPCH = 14
(Number of results = 1)
--- END

LST UDPUCFGDATA:;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:04:19
O&M #1866544
%%/*1879304620*/LST UDPUCFGDATA:;%%
RETCODE = 0 Execution succeeded.

List DPU Configuration Parameters

---------------------------------
IuUP Initialization Timer = 100
IuUP Time Alignment Timer = 100
IuUP Rate Control Timer = 100
Number of IuUP Initialization Repeats = 3
Number of IuUP Time Alignment = 3
Number of IuUP Rate Control = 3
Repeat Times of Macc Paging = 0
First Macro Diversity Combination Delay = 20
Iub FP Protect Time of Trans Channel Syn = 150
Protect Time of Iub FP for Node Syn = 150
Iur FP Protect Time of Trans Channel Syn = 200
Protect Time of Iur FP for Node Syn = 200
Time Adjustment Switch = ON
Max. Adjustment Step in Time Alignment = 10
Num. of HS-DSCH Capacity Request Retrans = 6
NodeB Capacity Allocation Timer = 200
HS-DSCH Rate Limit Period = 400
HSDPA Rate Limit Coefficient = 50
HSDPA Rate Recovery Coefficient = 130
AMR RTP Payload Type = 96
VP RTP Payload Type = 96
Stream RTP Payload Type = 96
Inband Signaling RTP Payload Type = 96
RTP Receive Delay Variation Threshold = 10
RTP RTT Threshold = 50
RLC Rate Limit Coefficient = 50
RLC Rate Recovery Coefficient = 130
Quick Rate Limit Coefficient for Cong = 95
Rate Limit Coefficient for Congestion = 10
Initial Rate Up Step = 2000
Sample Num. for UL CS Delay Adjustment = 6
Threshold for UL CS Delay Adjustment = 3
UL CS Advance Adjustment Interval = 1
Max. Adjustment Step of UL CS Advance = 1
Target for UL CS advance Adjustment = 4
Protection Time of UL CS Advance Adjust = 20
CRC Check Switch = ON
Switch Of DL R99 Congestion Control = OFF
Congestion Thres of Packet Loss Ratio = 20
Congestion Thres of Lost Packet Number = 1
Iur HSUPA Congestion Control Switch = ON
Congestion Delay Thres in UL Trans Layer = 6
PacketLossRatio Thres in UL Trans Layer = 5
Lost Packet Num Thres In UL Trans Layer = 1
Lost Packet Num Thres2 In UL Trans Layer = 5
Number of UL Split Acks = 3
Number of DL Split Acks = 3
Quality of Service Parameter Adjustment Period = 2
 Service Priority Adjusting Coefficient = 10
SPI Weight Adjust Strategy Factor = 0
Max Interval of SPI Weight Adjust Factor = 6
HSUPA Congestion Control Switch = ON
Performance Measurement Switch = Enable the counters of QoS
Scheduling Priority Weight for High PRI Service = 100
Scheduling Priority Weight for Middle PRI Service = 10
Scheduling Priority Weight for Low PRI Service = 1
FACH Congestion Threshold = 60
FACH Congestion Recovery Threshold = 30
FACH Congestion Clearing Threshold = 10
Switch of Auto ACK Construct in TCP Mode = OFF
DRD Rollback Switch = ON
HSDPA Data Sending Time Switch = OFF
Paging Preemption Switch = ON
AMR Noise Change Switch = ON
TPE Multi-Threading Switch = OFF
Smart Service Sharing Threshold = 50
FACH CCCH Congestion Threshold = 60
FACH CCCH Congestion Clear Threshold = 30
ICMP Echo Acceleration Switch = OFF
Reserved Switch 1 = RsvdSwitch1_Bit1::OFF
= RsvdSwitch1_Bit2::OFF
= RsvdSwitch1_Bit3::OFF
= RsvdSwitch1_Bit4::OFF
= RsvdSwitch1_Bit5::OFF
= RsvdSwitch1_Bit6::OFF
= RsvdSwitch1_Bit7::OFF
= RsvdSwitch1_Bit8::OFF
= RsvdSwitch1_Bit9::OFF
= RsvdSwitch1_Bit10::OFF
= RsvdSwitch1_Bit11::OFF
= RsvdSwitch1_Bit12::OFF
= RsvdSwitch1_Bit13::OFF
= RsvdSwitch1_Bit14::OFF
= RsvdSwitch1_Bit15::OFF
= RsvdSwitch1_Bit16::OFF
= RsvdSwitch1_Bit17::OFF
= RsvdSwitch1_Bit18::OFF
= RsvdSwitch1_Bit19::OFF
= RsvdSwitch1_Bit20::OFF
= RsvdSwitch1_Bit21::OFF
= RsvdSwitch1_Bit22::OFF
= RsvdSwitch1_Bit23::OFF
= RsvdSwitch1_Bit24::OFF
= RsvdSwitch1_Bit25::OFF
= RsvdSwitch1_Bit26::OFF
= RsvdSwitch1_Bit27::OFF
= RsvdSwitch1_Bit28::OFF
= RsvdSwitch1_Bit29::OFF
= RsvdSwitch1_Bit30::OFF
= RsvdSwitch1_Bit31::OFF
= RsvdSwitch1_Bit32::OFF
Reserved Switch 2 = RsvdSwitch2_Bit1::OFF
= RsvdSwitch2_Bit2::OFF
= RsvdSwitch2_Bit3::OFF
= RsvdSwitch2_Bit4::OFF
= RsvdSwitch2_Bit5::OFF
= RsvdSwitch2_Bit6::OFF
 = RsvdSwitch2_Bit7::OFF
= RsvdSwitch2_Bit8::OFF
= RsvdSwitch2_Bit9::OFF
= RsvdSwitch2_Bit10::OFF
= RsvdSwitch2_Bit11::OFF
= RsvdSwitch2_Bit12::OFF
= RsvdSwitch2_Bit13::OFF
= RsvdSwitch2_Bit14::OFF
= RsvdSwitch2_Bit15::OFF
= RsvdSwitch2_Bit16::OFF
= RsvdSwitch2_Bit17::OFF
= RsvdSwitch2_Bit18::OFF
= RsvdSwitch2_Bit19::OFF
= RsvdSwitch2_Bit20::OFF
= RsvdSwitch2_Bit21::OFF
= RsvdSwitch2_Bit22::OFF
= RsvdSwitch2_Bit23::OFF
= RsvdSwitch2_Bit24::OFF
= RsvdSwitch2_Bit25::OFF
= RsvdSwitch2_Bit26::OFF
= RsvdSwitch2_Bit27::OFF
= RsvdSwitch2_Bit28::OFF
= RsvdSwitch2_Bit29::OFF
= RsvdSwitch2_Bit30::OFF
= RsvdSwitch2_Bit31::OFF
= RsvdSwitch2_Bit32::OFF
Reserved Parameter1 = 0
Reserved Parameter2 = 0
Reserved Parameter3 = 0
Reserved Parameter4 = 0
RLC SDU Retransmission = ON
SDU Delay Switch in FACH Admission = OFF
SDU Delay Threshold = 20
DL Max Macd PDU Size Adjustment Switch = ON
OM Switch = AMR FPPM Switch::ON
= SID Garbled Noise Dectection
Switch::ON
= Non122 AMR Noise Detect
Switch::ON
= TCPPROXY_OM_ENH_SWITCH::OFF
= IPv6 OM Switch::OFF
Low-Priority Signaling Paging Switch = OFF
Cell Status Reporting Period = 5
Process Control Switch = H2F_4B_SWITCH::OFF
= RLC_SUFI_WINDOW_SWITCH::OFF
=
RLC_UM_HFN_INVALID_RRC_REL_SWITCH::OFF
=
NO_CONG_RESUME_GUARANTEE_RATE_SWITCH::OFF
= TPE_ONLY_SPLIT_SWITCH::OFF
= DELAY_MSG_SWITCH::OFF
=
RACH_SYNC_CHK_EFFECT_MODE_SWITCH::OFF
= UEA1_SOFT_ENCRYPT_SWITCH::OFF
= IUUP_RC_REPEAT_SWITCH::OFF
=
BIG_LITTLE_END_CONV_MSG_LEN_CHK_SWITCH::OFF
=
INTER_SUBRACK_MCAST_MSG_LEN_CHK_SWITCH::OFF
 =
PS_DATA_TIME_DELAY_CTRL_SWITCH::OFF
=
SILENT_INJECT_NOISE_DBG_SWITCH::OFF
= VOICE_CIPHER_DBG_SWITCH::OFF
= VQI_OPTIMIZATION_SWITCH::OFF
= DELAY_POLL_TIMER_SWITCH::ON
=
OVERLOAD_AMR_DISCARD_SWITCH::OFF
= L2_RESOURCE_CHECK_SWITCH::ON
=
MACD_SCHEDULE_CHECK_SWITCH::ON
=
IUUP_EMPTY_FRAME_DISCARD_SWITCH::ON
= PAGING_DETECT_SWITCH::ON
=
IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWITCH::OFF
=
PSDATA_UTRAN_PAGING_PREEMPTED_SWITCH::OFF
=
KQI_SUBRACK_LOAD_CTRL_SWITCH::ON
=
KEEP_ALIVE_BASE_ON_NODEB_CAPACITY_SWITCH::ON
=
CONV_PAGING_IDENTITY_SWITCH::OFF
= UP_MINOR_LOG_CTRL_SWITCH::ON
WB AMR Noise Correct Switch = ON
Self-healing Switch =
L2_UE_RESOURCE_SELFCUR_SWITCH::OFF
= L2_COMMON_RES_AUDIT::OFF
=
UUP_LOOP_CHK_SELFCURE_SWITCH::ON
= INDEX_SELFCUR_SWITCH::ON
= MEM_POOL_SELFCUR_SWITCH::ON
= TCP_PROXY_SELFCURE_SWITCH::ON
AMR Static Detection Threshold = 12
WB AMR Noise Detect Mode = TRADEOFF MODE
Min. Times of HS-DSCH Data Packet Scheduling = D10
Downlink service throughput threshold = 100
Optimization Switch =
PSREL_DUETO_CSFAIL_OPTIMIZE_SWITCH::OFF
=
HSDSCH_CAPACITY_REQ_TIMES_SWITCH::OFF
=
AM_RLC_SPECIAL_HE_COMPATIBLE_SWITCH::OFF
=
REMOVE_BAND_NOISE_SILENCE_AND_VQI_SWITCH::OFF
=
UL_COMBINE_OPTIMIZE_SWITCH::OFF
=
HSUPA_FASTDELIVER_OPTIMIZE_SWITCH::OFF
=
SRB_OVER_HSDPA_CFN_OPTIMIZE_SWITCH::OFF
=
MACD_4B_MEAS_OPTIMIZE_SWITCH::ON
=
RACH_PACKET_DISCARD_SWITCH::OFF
=
MACC_PAGING_STAT_OPTI_SWITCH::OFF
 = ERRFRAME_DISCARD_SWITCH::OFF
= MT_IMPROVE_SWITCH::OFF
=
UP_MAINT_STAT_COUNT_SWITCH::OFF
=
IUUP_RTP_STAT_OPTIMIZE_SWITCH::OFF
= TCPPROXY_EXIT_OPT_SWITCH::OFF
= UP_LOG_STAT_OPT_SWITCH::OFF
=
MACD_BUFFER_OVERFLOW_OPT_SWITCH::OFF
=
LIGHTLOAD_PS_SERV_SCHE_OPT_SW::OFF
=
RLC_REASSEMBLE_OPT_SWITCH::OFF
=
ABNORMAL_VOICE_FRAME_OPTIMIZE_SWITCH::OFF
= DCH_SYN_OPT_SWITCH::OFF
= FP_ABN_REL_OPT_SWITCH::OFF
AMR Packet Loss Rate Threshold = 2
AMR Packet Loss Number Threshold = 1
AMR Delay Variation Threshold = 6
Inter-Subrack Load Sharing Thld for DEU = 50
Silence Detection Thld = 40
Consecutive Errored Frame Thld = 20
CS Paging Preemption Switch for Platinum Users = OFF
PS Paging Preemption Switch for Platinum Users = OFF
DL Service Throughput 1 = 150
DL Service Throughput 2 = 200
Non-12.2k NB-AMR Noise Detect Thld = 8
Tcp Proxy Receive Window Threshold = 256
SRB Packet Loss Rate Threshold = 2
SRB Packet Loss Number Threshold = 1
SRB Delay Variation Threshold = 6
PCHR Mute Detection Period = DETECT_PERIOD_4S
Min. DSP Scheduling Limits = 200
RACH Packet Discard Threshold = 1000
Macc Conversation Page Repeat Times = 0
F2D State Transition TCP Port No = 80
DLMBR Threshold For Service Measurement = D0
User Sampling Rate for TCP Measurement = 10
TCP Proxy CPU Admittance Threshold = 55
TCP Proxy Ratio = 100
TCP Proxy MBR Admittance Threshold = 512
TCP Proxy Initial Congestion Window = 64
TCP Proxy Send Ack Strategy Threshold = 0
Cfn Adjust Threshold = 255
(Number of results = 1)

--- END

SET UDPUCFGDATA:OPTIMIZATIONSWITCH=PSREL_DUETO_CSFAIL_OPTIMIZE_SWITCH-1;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:05:38
O&M #1866550
%%/*1879304621*/SET UDPUCFGDATA:
OPTIMIZATIONSWITCH=PSREL_DUETO_CSFAIL_OPTIMIZE_SWITCH-1;%%
RETCODE = 0 Execution succeeded.
--- END

LST UDPUCFGDATA:;
RNC655H_MSL
+++ RNC655H_MSL 2020-07-27 20:05:46
O&M #1866553
%%/*1879304622*/LST UDPUCFGDATA:;%%
RETCODE = 0 Execution succeeded.

List DPU Configuration Parameters

---------------------------------
IuUP Initialization Timer = 100
IuUP Time Alignment Timer = 100
IuUP Rate Control Timer = 100
Number of IuUP Initialization Repeats = 3
Number of IuUP Time Alignment = 3
Number of IuUP Rate Control = 3
Repeat Times of Macc Paging = 0
First Macro Diversity Combination Delay = 20
Iub FP Protect Time of Trans Channel Syn = 150
Protect Time of Iub FP for Node Syn = 150
Iur FP Protect Time of Trans Channel Syn = 200
Protect Time of Iur FP for Node Syn = 200
Time Adjustment Switch = ON
Max. Adjustment Step in Time Alignment = 10
Num. of HS-DSCH Capacity Request Retrans = 6
NodeB Capacity Allocation Timer = 200
HS-DSCH Rate Limit Period = 400
HSDPA Rate Limit Coefficient = 50
HSDPA Rate Recovery Coefficient = 130
AMR RTP Payload Type = 96
VP RTP Payload Type = 96
Stream RTP Payload Type = 96
Inband Signaling RTP Payload Type = 96
RTP Receive Delay Variation Threshold = 10
RTP RTT Threshold = 50
RLC Rate Limit Coefficient = 50
RLC Rate Recovery Coefficient = 130
Quick Rate Limit Coefficient for Cong = 95
Rate Limit Coefficient for Congestion = 10
Initial Rate Up Step = 2000
Sample Num. for UL CS Delay Adjustment = 6
Threshold for UL CS Delay Adjustment = 3
UL CS Advance Adjustment Interval = 1
Max. Adjustment Step of UL CS Advance = 1
Target for UL CS advance Adjustment = 4
Protection Time of UL CS Advance Adjust = 20
CRC Check Switch = ON
Switch Of DL R99 Congestion Control = OFF
Congestion Thres of Packet Loss Ratio = 20
Congestion Thres of Lost Packet Number = 1
Iur HSUPA Congestion Control Switch = ON
Congestion Delay Thres in UL Trans Layer = 6
PacketLossRatio Thres in UL Trans Layer = 5
Lost Packet Num Thres In UL Trans Layer = 1
Lost Packet Num Thres2 In UL Trans Layer = 5
Number of UL Split Acks = 3
Number of DL Split Acks = 3
Quality of Service Parameter Adjustment Period = 2
 Service Priority Adjusting Coefficient = 10
SPI Weight Adjust Strategy Factor = 0
Max Interval of SPI Weight Adjust Factor = 6
HSUPA Congestion Control Switch = ON
Performance Measurement Switch = Enable the counters of QoS
Scheduling Priority Weight for High PRI Service = 100
Scheduling Priority Weight for Middle PRI Service = 10
Scheduling Priority Weight for Low PRI Service = 1
FACH Congestion Threshold = 60
FACH Congestion Recovery Threshold = 30
FACH Congestion Clearing Threshold = 10
Switch of Auto ACK Construct in TCP Mode = OFF
DRD Rollback Switch = ON
HSDPA Data Sending Time Switch = OFF
Paging Preemption Switch = ON
AMR Noise Change Switch = ON
TPE Multi-Threading Switch = OFF
Smart Service Sharing Threshold = 50
FACH CCCH Congestion Threshold = 60
FACH CCCH Congestion Clear Threshold = 30
ICMP Echo Acceleration Switch = OFF
Reserved Switch 1 = RsvdSwitch1_Bit1::OFF
= RsvdSwitch1_Bit2::OFF
= RsvdSwitch1_Bit3::OFF
= RsvdSwitch1_Bit4::OFF
= RsvdSwitch1_Bit5::OFF
= RsvdSwitch1_Bit6::OFF
= RsvdSwitch1_Bit7::OFF
= RsvdSwitch1_Bit8::OFF
= RsvdSwitch1_Bit9::OFF
= RsvdSwitch1_Bit10::OFF
= RsvdSwitch1_Bit11::OFF
= RsvdSwitch1_Bit12::OFF
= RsvdSwitch1_Bit13::OFF
= RsvdSwitch1_Bit14::OFF
= RsvdSwitch1_Bit15::OFF
= RsvdSwitch1_Bit16::OFF
= RsvdSwitch1_Bit17::OFF
= RsvdSwitch1_Bit18::OFF
= RsvdSwitch1_Bit19::OFF
= RsvdSwitch1_Bit20::OFF
= RsvdSwitch1_Bit21::OFF
= RsvdSwitch1_Bit22::OFF
= RsvdSwitch1_Bit23::OFF
= RsvdSwitch1_Bit24::OFF
= RsvdSwitch1_Bit25::OFF
= RsvdSwitch1_Bit26::OFF
= RsvdSwitch1_Bit27::OFF
= RsvdSwitch1_Bit28::OFF
= RsvdSwitch1_Bit29::OFF
= RsvdSwitch1_Bit30::OFF
= RsvdSwitch1_Bit31::OFF
= RsvdSwitch1_Bit32::OFF
Reserved Switch 2 = RsvdSwitch2_Bit1::OFF
= RsvdSwitch2_Bit2::OFF
= RsvdSwitch2_Bit3::OFF
= RsvdSwitch2_Bit4::OFF
= RsvdSwitch2_Bit5::OFF
= RsvdSwitch2_Bit6::OFF
 = RsvdSwitch2_Bit7::OFF
= RsvdSwitch2_Bit8::OFF
= RsvdSwitch2_Bit9::OFF
= RsvdSwitch2_Bit10::OFF
= RsvdSwitch2_Bit11::OFF
= RsvdSwitch2_Bit12::OFF
= RsvdSwitch2_Bit13::OFF
= RsvdSwitch2_Bit14::OFF
= RsvdSwitch2_Bit15::OFF
= RsvdSwitch2_Bit16::OFF
= RsvdSwitch2_Bit17::OFF
= RsvdSwitch2_Bit18::OFF
= RsvdSwitch2_Bit19::OFF
= RsvdSwitch2_Bit20::OFF
= RsvdSwitch2_Bit21::OFF
= RsvdSwitch2_Bit22::OFF
= RsvdSwitch2_Bit23::OFF
= RsvdSwitch2_Bit24::OFF
= RsvdSwitch2_Bit25::OFF
= RsvdSwitch2_Bit26::OFF
= RsvdSwitch2_Bit27::OFF
= RsvdSwitch2_Bit28::OFF
= RsvdSwitch2_Bit29::OFF
= RsvdSwitch2_Bit30::OFF
= RsvdSwitch2_Bit31::OFF
= RsvdSwitch2_Bit32::OFF
Reserved Parameter1 = 0
Reserved Parameter2 = 0
Reserved Parameter3 = 0
Reserved Parameter4 = 0
RLC SDU Retransmission = ON
SDU Delay Switch in FACH Admission = OFF
SDU Delay Threshold = 20
DL Max Macd PDU Size Adjustment Switch = ON
OM Switch = AMR FPPM Switch::ON
= SID Garbled Noise Dectection
Switch::ON
= Non122 AMR Noise Detect
Switch::ON
= TCPPROXY_OM_ENH_SWITCH::OFF
= IPv6 OM Switch::OFF
Low-Priority Signaling Paging Switch = OFF
Cell Status Reporting Period = 5
Process Control Switch = H2F_4B_SWITCH::OFF
= RLC_SUFI_WINDOW_SWITCH::OFF
=
RLC_UM_HFN_INVALID_RRC_REL_SWITCH::OFF
=
NO_CONG_RESUME_GUARANTEE_RATE_SWITCH::OFF
= TPE_ONLY_SPLIT_SWITCH::OFF
= DELAY_MSG_SWITCH::OFF
=
RACH_SYNC_CHK_EFFECT_MODE_SWITCH::OFF
= UEA1_SOFT_ENCRYPT_SWITCH::OFF
= IUUP_RC_REPEAT_SWITCH::OFF
=
BIG_LITTLE_END_CONV_MSG_LEN_CHK_SWITCH::OFF
=
INTER_SUBRACK_MCAST_MSG_LEN_CHK_SWITCH::OFF
 =
PS_DATA_TIME_DELAY_CTRL_SWITCH::OFF
=
SILENT_INJECT_NOISE_DBG_SWITCH::OFF
= VOICE_CIPHER_DBG_SWITCH::OFF
= VQI_OPTIMIZATION_SWITCH::OFF
= DELAY_POLL_TIMER_SWITCH::ON
=
OVERLOAD_AMR_DISCARD_SWITCH::OFF
= L2_RESOURCE_CHECK_SWITCH::ON
=
MACD_SCHEDULE_CHECK_SWITCH::ON
=
IUUP_EMPTY_FRAME_DISCARD_SWITCH::ON
= PAGING_DETECT_SWITCH::ON
=
IUUP_INIT_FRAME_IPTI_ERR_COMPAT_SWITCH::OFF
=
PSDATA_UTRAN_PAGING_PREEMPTED_SWITCH::OFF
=
KQI_SUBRACK_LOAD_CTRL_SWITCH::ON
=
KEEP_ALIVE_BASE_ON_NODEB_CAPACITY_SWITCH::ON
=
CONV_PAGING_IDENTITY_SWITCH::OFF
= UP_MINOR_LOG_CTRL_SWITCH::ON
WB AMR Noise Correct Switch = ON
Self-healing Switch =
L2_UE_RESOURCE_SELFCUR_SWITCH::OFF
= L2_COMMON_RES_AUDIT::OFF
=
UUP_LOOP_CHK_SELFCURE_SWITCH::ON
= INDEX_SELFCUR_SWITCH::ON
= MEM_POOL_SELFCUR_SWITCH::ON
= TCP_PROXY_SELFCURE_SWITCH::ON
AMR Static Detection Threshold = 12
WB AMR Noise Detect Mode = TRADEOFF MODE
Min. Times of HS-DSCH Data Packet Scheduling = D10
Downlink service throughput threshold = 100
Optimization Switch =
PSREL_DUETO_CSFAIL_OPTIMIZE_SWITCH::ON
=
HSDSCH_CAPACITY_REQ_TIMES_SWITCH::OFF
=
AM_RLC_SPECIAL_HE_COMPATIBLE_SWITCH::OFF
=
REMOVE_BAND_NOISE_SILENCE_AND_VQI_SWITCH::OFF
=
UL_COMBINE_OPTIMIZE_SWITCH::OFF
=
HSUPA_FASTDELIVER_OPTIMIZE_SWITCH::OFF
=
SRB_OVER_HSDPA_CFN_OPTIMIZE_SWITCH::OFF
=
MACD_4B_MEAS_OPTIMIZE_SWITCH::ON
=
RACH_PACKET_DISCARD_SWITCH::OFF
=
MACC_PAGING_STAT_OPTI_SWITCH::OFF
 = ERRFRAME_DISCARD_SWITCH::OFF
= MT_IMPROVE_SWITCH::OFF
=
UP_MAINT_STAT_COUNT_SWITCH::OFF
=
IUUP_RTP_STAT_OPTIMIZE_SWITCH::OFF
= TCPPROXY_EXIT_OPT_SWITCH::OFF
= UP_LOG_STAT_OPT_SWITCH::OFF
=
MACD_BUFFER_OVERFLOW_OPT_SWITCH::OFF
=
LIGHTLOAD_PS_SERV_SCHE_OPT_SW::OFF
=
RLC_REASSEMBLE_OPT_SWITCH::OFF
=
ABNORMAL_VOICE_FRAME_OPTIMIZE_SWITCH::OFF
= DCH_SYN_OPT_SWITCH::OFF
= FP_ABN_REL_OPT_SWITCH::OFF
AMR Packet Loss Rate Threshold = 2
AMR Packet Loss Number Threshold = 1
AMR Delay Variation Threshold = 6
Inter-Subrack Load Sharing Thld for DEU = 50
Silence Detection Thld = 40
Consecutive Errored Frame Thld = 20
CS Paging Preemption Switch for Platinum Users = OFF
PS Paging Preemption Switch for Platinum Users = OFF
DL Service Throughput 1 = 150
DL Service Throughput 2 = 200
Non-12.2k NB-AMR Noise Detect Thld = 8
Tcp Proxy Receive Window Threshold = 256
SRB Packet Loss Rate Threshold = 2
SRB Packet Loss Number Threshold = 1
SRB Delay Variation Threshold = 6
PCHR Mute Detection Period = DETECT_PERIOD_4S
Min. DSP Scheduling Limits = 200
RACH Packet Discard Threshold = 1000
Macc Conversation Page Repeat Times = 0
F2D State Transition TCP Port No = 80
DLMBR Threshold For Service Measurement = D0
User Sampling Rate for TCP Measurement = 10
TCP Proxy CPU Admittance Threshold = 55
TCP Proxy Ratio = 100
TCP Proxy MBR Admittance Threshold = 512
TCP Proxy Initial Congestion Window = 64
TCP Proxy Send Ack Strategy Threshold = 0
Cfn Adjust Threshold = 255
(Number of results = 1)

--- END