Piping Material Specification

3C605
Carbon Steel, Class 300
Revision: 0
Issue Date : Feb 17, 2014

FOREWORD
PETRONAS Technical Standards (PTS) has been developed based on the accumulated knowledge, experience and best practices of the
PETRONAS group supplemented by national and international standards where appropriate. The key objective of PTS is to ensure standard
technical practice across the PETRONAS group.

Compliance to PTS is compulsory for PETRONAS-operated facilities and Joint Ventures (JVs) where PETRONAS has more than fifty
percent (50%) shareholding and/or operational control, and includes all phases of work activities.

Contractors/manufacturers/suppliers who use PTS are solely responsible in ensuring the quality of work, goods and services meet the required
design and engineering standards. In the case where specific requirements are not covered in the PTS, it is the responsibility of the
Contractors/manufacturers/suppliers to propose other proven or internationally established standards or practices of the same level of quality
and integrity as reflected in the PTS.

In issuing and making the PTS available, PETRONAS is not making any warranty on the accuracy or completeness of the information
contained in PTS. The Contractors/manufacturers/suppliers shall ensure accuracy and completeness of the PTS used for the intended design
and engineering requirement and shall inform the Owner for any conflicting requirement with other international codes and technical
standards before start of any work.

PETRONAS is the sole copyright holder of PTS. No part of this document may be reproduced, stored in a retrieval system or transmitted in
any form or by any means (electronic, mechanical, recording or otherwise) or be disclosed by users to any company or person whomsoever,
without the prior written consent of PETRONAS.

The PTS shall be used exclusively for the authorised purpose. The users shall arrange for PTS to be kept in safe custody and shall ensure its
secrecy is maintained and provide satisfactory information to PETRONAS that this requirement is met.
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 2 / 12

ASME RATING : CLASS 300

CORROSION ALLOWANCE : 3.0 mm
MATERIAL : Carbon Steel
Pressure - Temperature Ratings
Temperature (oC) 0 50 75 100 125 150
Pressure (barG)
DN 15 to 1200 51.1 50.1 48.3 46.6 45.8 45.1
Size/Schedule
Size (DN) 15 20 25 40 50 80 100 150 200 250 300 350
Schedule S-160 S-160 S-160 S-160 S-80 S-80 S-40 S-40 S-40 S-40 S-40 S-40
400 450 500 600 750 900 1050 1200
S-40 S-40 S-40 S-40 17.5 mm 20.6 mm 23.8 mm 25.4 mm

Item Short Code Size 1 / Size 2 Commodity Description Commodity Code

Pipes & Tubes
P5 15 - 40 / - Pipe, ASME B36.10M, PE, ASTM A106-B, Seamless PPPABQPEACRAAGZ
P10 50 - 600 / - Pipe, ASME B36.10M, BE, ASTM A106-B, Seamless PPPABQBEACRAAGZ
P15 400 - 600 / - Pipe, ASME B36.10M, BE, ASTM A672-C65 CL22 PPPABQBEA1BHZZZZ
P20 750 - 1050 / - Pipe, ASME B36.10M, PE, ASTM A672-C65 CL22 PPPABQPEA1BHZZZZ
P25 1200 - 1200 / - Pipe, ASME B36.10M, PE, ASTM A671-CC65 CL22 PPPABQPEA1ACZZZZ
P30 100 - 400 / - Pipe, ASME B36.10M, PE, API 5L Grade B, Seamless PPPABQPEAEEAAGZ
P35 450 - 600 / - Pipe, ASME B36.10M, PE, API 5L Grade B, Longitudinal Seam SAW PPPABQPEAEE1AAB
Ball Valves
VB100 15 - 40 / - Ball Vlv LP FB, ISO 17292, CL 300, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLA1AKIRF8CA1BU2BMZZZZ
Lever, ASTM A105 Normalised, AISI 316, Filled PTFE Trim, Graphite/Thermoplastic
Seals, ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, Sour
VB105 15 - 40 / - Ball Vlv LP FB, ISO 17292, CL 300, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLA1AKIRF8CACD2BMZZZZ
Lever, ASTM A216-WCB, AISI 316, Filled PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, Sour
VB110 15 - 40 / - Ball Vlv LP FB, ISO 17292, CL 300, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBLA1AKIRF8CACE2BMZZZZ
Lever, ASTM A216-WCC, AISI 316, Filled PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, Sour
VB115 15 - 50 / - Ball Vlv SP RB, ISO 17292, CL 300, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBUA1AKIRF8CA1BU2BMZZZZ
Lever, ASTM A105 Normalised, AISI 316, Filled PTFE Trim, Graphite/Thermoplastic
Seals, ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, Sour
VB120 15 - 50 / - Ball Vlv SP RB, ISO 17292, CL 300, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBUA1AKIRF8CACD2BMZZZZ
Lever, ASTM A216-WCB, AISI 316, Filled PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, Sour
VB125 15 - 50 / - Ball Vlv SP RB, ISO 17292, CL 300, RF, Floating Ball, Integral (Non-Extended) Bonnet, VBUA1AKIRF8CACE2BMZZZZ
Lever, ASTM A216-WCC, AISI 316, Filled PTFE Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7M Bolts/Studs, ASTM A194 Grade 2HM Nuts, Sour
VB130 50 - 100 / - Ball Vlv Std Ptn FB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non-Extended) VB9AA9IRF5CA1BU2BKZZZZ
Bonnet, Lever, ASTM A105 Normalised, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VB131 50 - 100 / - Ball Vlv Std Ptn FB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non-Extended) VB9AA9IRF5CACD2BKZZZZ
Bonnet, Lever, ASTM A216-WCB, AISI 316, Filled PTFE Trim, Elastomeric/Graphite
Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VB132 50 - 100 / - Ball Vlv Std Ptn FB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non-Extended) VB9AA9IRF5CACE2BKZZZZ
Bonnet, Lever, ASTM A216-WCC, AISI 316, Filled PTFE Trim, Elastomeric/Graphite
Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VB135 150 - 600 / - Ball Vlv Std Ptn FB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non-Extended) VB9AA9IRF5AA1BU2BKZZZZ
Bonnet, Bevel Gear Operator, ASTM A105 Normalised, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VB136 150 - 600 / - Ball Vlv Std Ptn FB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non-Extended) VB9AA9IRF5AACD2BKZZZZ
Bonnet, Bevel Gear Operator, ASTM A216-WCB, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VB141 150 - 600 / - Ball Vlv Std Ptn FB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non-Extended) VB9AA9IRF5AACE2BKZZZZ
Bonnet, Bevel Gear Operator, ASTM A216-WCC, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VB145 80 - 150 / - Ball Vlv Std Ptn RB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non- VB8AA9IRF5CA1BU2BKZZZZ
Extended) Bonnet, Lever, ASTM A105 Normalised, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VB146 80 - 150 / - Ball Vlv Std Ptn RB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non- VB8AA9IRF5CACD2BKZZZZ
Extended) Bonnet, Lever, ASTM A216-WCB, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 3 / 12

Item Short Code Size 1 / Size 2 Commodity Description Commodity Code

Ball Valves
VB147 80 - 150 / - Ball Vlv Std Ptn RB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non- VB8AA9IRF5CACE2BKZZZZ
Extended) Bonnet, Lever, ASTM A216-WCC, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VB150 200 - 600 / - Ball Vlv Std Ptn RB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non- VB8AA9IRF5AA1BU2BKZZZZ
Extended) Bonnet, Bevel Gear Operator, ASTM A105 Normalised, AISI 316, Filled PTFE
Trim, Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade
2H Nuts
VB151 200 - 600 / - Ball Vlv Std Ptn RB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non- VB8AA9IRF5AACD2BKZZZZ
Extended) Bonnet, Bevel Gear Operator, ASTM A216-WCB, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
VB156 200 - 600 / - Ball Vlv Std Ptn RB, API 6D, CL 300, RF, Trunnion Mounted Ball, Bolted (Non- VB8AA9IRF5AACE2BKZZZZ
Extended) Bonnet, Bevel Gear Operator, ASTM A216-WCC, AISI 316, Filled PTFE Trim,
Elastomeric/Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H
Nuts
Butterfly Valves
VY160 200 - 1200 / - Bfly Vlv Off Dbl Flg, API 609 Cat B, CL 300, RF, Bolted Cover Bonnet, Bevel Gear VYDAA2IRF2AA1BU2AJ1ACZ
Operator, ASTM A105 Normalised, CS, PTFE, ALY625 Trim, Graphite/Thermoplastic
Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VY165 200 - 1200 / - Bfly Vlv Off Dbl Flg, API 609 Cat B, CL 300, RF, Bolted Cover Bonnet, Bevel Gear VYDAA2IRF2AACD2AJ1ACZ
Operator, ASTM A216-WCB, CS, PTFE, ALY625 Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VY170 200 - 1200 / - Bfly Vlv Off Dbl Flg, API 609 Cat B, CL 300, RF, Bolted Cover Bonnet, Bevel Gear VYDAA2IRF2AACE2AJ1ACZ
Operator, ASTM A216-WCC, CS, PTFE, ALY625 Trim, Graphite/Thermoplastic Seals,
ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
Check Valves
VC175 300 - 600 / - Dual Plate Check, API 594, CL 300, RF, ASTM A105 Normalised, AISI 410 Trim VCWFAA2IRFZA1BU2AGAAMZ
VC176 300 - 600 / - Dual Plate Check, API 594, CL 300, RF, ASTM A216-WCB, AISI 410 Trim VCWFAA2IRFZACD2AGAAMZ
VC177 300 - 600 / - Dual Plate Check, API 594, CL 300, RF, ASTM A216-WCC, AISI 410 Trim VCWFAA2IRFZACE2AGAAMZ
VC178 300 - 600 / - Dual Plate Check, API 594, CL 300, RF, ASTM A105 Quenched and Tempered, AISI 410 VCWFAA2IRFZA1BK2AGAAMZ
Trim
VC180 750 - 1200 / - Dual Plate Check, API 594, CL 300, RF, ASTM A105 Normalised, AISI 410 Trim VCWFAA2IRFZA1BU2AG1ADN
VC181 750 - 1200 / - Dual Plate Check, API 594, CL 300, RF, ASTM A216-WCB, AISI 410 Trim VCWFAA2IRFZACD2AG1ADN
VC186 750 - 1200 / - Dual Plate Check, API 594, CL 300, RF, ASTM A216-WCC, AISI 410 Trim VCWFAA2IRFZACE2AG1ADN
VC191 750 - 1200 / - Dual Plate Check, API 594, CL 300, RF, ASTM A105 Quenched and Tempered, AISI 410 VCWFAA2IRFZA1BK2AG1ADN
Trim
VC200 15 - 40 / - Piston Chk Vlv RB, API 602, CL 300, RF, Bltd Bonnet, ASTM A105 Normalised, AISI VC1BAA5IRFAA1BU2AEZZZZ
410 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VC201 15 - 40 / - Piston Chk Vlv RB, API 602, CL 800, SWE, Bltd Bonnet, ASTM A105 Normalised, AISI VC1BAA5MSWAA1BU2AEZZZZ
410 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VC205 50 - 600 / - Swing Chk Vlv, BS 1868, CL 300, RF, Bltd Bonnet, ASTM A105 Normalised, AISI 410 VCSCBWDIRFAA1BU2AEZZZZ
Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VC210 50 - 600 / - Swing Chk Vlv, BS 1868, CL 300, RF, Bltd Bonnet, ASTM A216-WCB, AISI 410 Trim, VCSCBWDIRFAACD2AEZZZZ
Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
VC215 50 - 600 / - Swing Chk Vlv, BS 1868, CL 300, RF, Bltd Bonnet, ASTM A216-WCC, AISI 410 Trim, VCSCBWDIRFAACE2AEZZZZ
Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194 Grade 2H Nuts
Gate Valves
VG225 15 - 40 / - Gate Vlv RB, Wedge, API 602, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A105 VG4AA5IRFAFA1BU2AEZZZZ
Normalised, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts
VG226 15 - 40 / - Gate Vlv RB, Wedge, API 602, CL 800, SWE, Bltd Bonnet, Handwheel, ASTM A105 VG4AA5MSWAFA1BU2AEZZZZ
Normalised, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts
VG230 50 - 350 / - Gate Vlv FB, Wedge, API 600, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A105 VG8AA4IRFAFA1BU2AEZZZZ
Normalised, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts
VG231 50 - 350 / - Gate Vlv FB, Wedge, API 600, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A216-WCB, VG8AA4IRFAFACD2AEZZZZ
AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
VG232 50 - 350 / - Gate Vlv FB, Wedge, API 600, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A216-WCC, VG8AA4IRFAFACE2AEZZZZ
AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
VG235 400 - 600 / - Gate Vlv FB, Wedge, API 600, CL 300, RF, Bltd Bonnet, Bevel Gear Operator, ASTM VG8AA4IRFAAA1BU2AEZZZZ
A105 Normalised, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7
Bolts/Studs, ASTM A194 Grade 2H Nuts
VG245 400 - 600 / - Gate Vlv FB, Wedge, API 600, CL 300, RF, Bltd Bonnet, Bevel Gear Operator, ASTM VG8AA4IRFAAACD2AEZZZZ
A216-WCB, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts
VG255 400 - 600 / - Gate Vlv FB, Wedge, API 600, CL 300, RF, Bltd Bonnet, Bevel Gear Operator, ASTM VG8AA4IRFAAACE2AEZZZZ
A216-WCC, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 4 / 12

Item Short Code Size 1 / Size 2 Commodity Description Commodity Code

Globe Valves
VL265 15 - 40 / - Globe Valve RB, API 602, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A105 Normalised, VL3AA5IRFAFA1BU2AEZZZZ
AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
VL266 15 - 40 / - Globe Valve RB, API 602, CL 800, SWE, Bltd Bonnet, Handwheel, ASTM A105 VL3AA5MSWAFA1BU2AEZZZZ
Normalised, AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs,
ASTM A194 Grade 2H Nuts
VL270 50 - 200 / - Globe Vlv FB, BS 1873, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A105 Normalised, VLRBWEIRFAFA1BU2AEZZZZ
AISI 410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
VL275 50 - 200 / - Globe Vlv FB, BS 1873, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A216-WCB, AISI VLRBWEIRFAFACD2AEZZZZ
410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
VL280 50 - 200 / - Globe Vlv FB, BS 1873, CL 300, RF, Bltd Bonnet, Handwheel, ASTM A216-WCC, AISI VLRBWEIRFAFACE2AEZZZZ
410, Stellite 6 Trim, Graphite Seals, ASTM A193 Grade B7 Bolts/Studs, ASTM A194
Grade 2H Nuts
Monoflange
VB290 15 - 15 / - Monoflange, ISO 17292, CL 300, RF x Swivel Gauge Adaptor, Single Block & Bleed, T- VB1A1AKI1C11ARQ2AAZZZZ
bar, ASTM A182 Grade F 316, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM
A193 Grade B8M Class 1 Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
VB291 15 - 15 / - Monoflange, ISO 17292, CL 300, RF x BSP, Single Block & Bleed, T-bar, ASTM A182 VB1A1AKI1E11ARQ2AAZZZZ
Grade F 316, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M
Class 1 Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
VB292 15 - 15 / - Monoflange, ISO 17292, CL 300, RF, Single Block & Bleed, T-bar, ASTM A182 Grade F VB1A1AKIRF11ARQ2AAZZZZ
316, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1
Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
VB293 15 - 15 / - Monoflange, ISO 17292, CL 300, RF x NPT, Single Block & Bleed, T-bar, ASTM A182 VB1A1AKI1D11ARQ2AAZZZZ
Grade F 316, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M
Class 1 Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
VB294 15 - 15 / - Monoflange, ISO 17292, CL 300, RF x Swivel Gauge Adaptor, Single Block, T-bar, ASTM VB1A1AKI1C21ARQ2AAZZZZ
A182 Grade F 316, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM A193
Grade B8M Class 1 Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
VB295 15 - 15 / - Monoflange, ISO 17292, CL 300, RF x BSP, Single Block, T-bar, ASTM A182 Grade F 316, VB1A1AKI1E21ARQ2AAZZZZ
AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1
Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
VB296 15 - 15 / - Monoflange, ISO 17292, CL 300, RF, Single Block, T-bar, ASTM A182 Grade F 316, AISI VB1A1AKIRF21ARQ2AAZZZZ
316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1
Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
VB297 15 - 15 / - Monoflange, ISO 17292, CL 300, RF x NPT, Single Block, T-bar, ASTM A182 Grade F VB1A1AKI1D21ARQ2AAZZZZ
316, AISI 316, PTFE Trim, Graphite/Thermoplastic Seals, ASTM A193 Grade B8M Class 1
Bolts/Studs, ASTM A194 Grade 8MA Nuts, Sour
Flanges
F300 15 - 600 / - Blind Flg., ASME B16.5, CL 300, RFFE, ASTM A105 FBLABLIRFACGZZZZ
F305 750 - 1200 / - Blind Flg., ASME B16.47 Sr A, CL 300, RFFE, ASTM A105 FBLABHIRFACGZZZZ
F310 40 - 40 / - Lap Joint Flg., ASME B16.5, CL 300, FFLF, ASTM A105, Machined FLJABLIFLACG1AAP
F315 15 - 600 / - WN Flg., ASME B16.5, CL 300, RFFE, ASTM A105 FWNABLIRFACGZZZ
F320 750 - 1200 / - WN Flg., ASME B16.47 Sr A, CL 300, RFFE, ASTM A105 FWNABHIRFACGZZZZ
F325 50 - 80 / - WN Ori Flg 0.5" Thd, ASME B16.36, CL 600, RFFE, ASTM A105 FO2ABDLRFACGZZZZ
F330 100 - 600 / - WN Ori Flg 0.5" Thd, ASME B16.36, CL 300, RFFE, ASTM A105 FO2ABDIRFACGZZZZ
BW Fittings
B335 15 - 600 / - 45 Deg. LR Elbow, ASME B16.9, BE, ASTM A234-WPB, Seamless BE4LABMBEACKABA
B340 750 - 1050 / - 45 Deg. LR Elbow, ASME B16.9, BE, ASTM A234-WPBW, Welded BE4LABMBEA1AW1AAO
B345 1200 - 1200 / - 45 Deg. LR Elbow, ASME B16.9, BE, ASTM A420-WPL6W, Welded BE4LABMBEA1AL1AAO
B350 15 - 600 / - 90 Deg. LR Elbow, ASME B16.9, BE, ASTM A234-WPB, Seamless BE9LABMBEACKABA
B355 750 - 1050 / - 90 Deg. LR Elbow, ASME B16.9, BE, ASTM A234-WPBW, Welded BE9LABMBEA1AW1AAO
B360 1200 - 1200 / - 90 Deg. LR Elbow, ASME B16.9, BE, ASTM A420-WPL6W, Welded BE9LABMBEA1AL1AAO
B365 15 - 1050 / - Cap, ASME B16.9, BE, ASTM A234-WPB, Seamless BCAPABMBEACKABA
B370 1200 - 1200 / - Cap, ASME B16.9, BE, ASTM A420 Grade WPL6, Seamless, Low Temp BCAPABMBEAYU1ADL
B375 20 - 600 / 15 - 500 Con. Reducer, ASME B16.9, BE, ASTM A234-WPB, Seamless BRECABMBEACKABA
B380 20 - 600 / 15 - 500 Ecc. Reducer, ASME B16.9, BE, ASTM A234-WPB, Seamless BREEABMBEACKABA
B385 15 - 600 / - Equal Tee, ASME B16.9, BE, ASTM A234-WPB, Seamless BTEEABMBEACKABAZ
B390 750 - 1050 / - Equal Tee, ASME B16.9, BE, ASTM A234-WPBW, Welded BTEEABMBEA1AW1AAO
B395 1200 - 1200 / - Equal Tee, ASME B16.9, BE, ASTM A420-WPL6W, Welded, Low Temp BTEEABMBEA1AL1ADK
B400 20 - 600 / 15 - 500 Red. Tee, ASME B16.9, BE, ASTM A234-WPB, Seamless BTERABMBEACKABAZ
B405 150 - 600 / 50 - 250 Weldolet, MSS SP-97, BE, ASTM A105 BWELAM9BEACGZZZZ
Forged Fittings
O410 40 - 1200 / 15 - 40 Flangeolet, MSS SP-97, CL 300, RFFE, ASTM A105 O1AAAM9IRFACGZZZZ
O415 40 - 1200 / 15 - 40 Nippolet, MSS SP-97, PE, ASTM A105, CL 6000 O1ABAM9PEACG1AAV
O450 40 - 40 / - Thermowell, CL 1500, RFFE, ASTM B564 UNS N04400, ASME B16.5, L=230 mm O1ACAZZPRFAN71AAZ
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 5 / 12

Item Short Code Size 1 / Size 2 Commodity Description Commodity Code

Forged Fittings
O455 40 - 40 / - Thermowell, CL 1500, RFFE, ASTM B564 UNS N04400, ASME B16.5, L=255 mm O1ACAZZPRFAN71AAY
O460 40 - 40 / - Thermowell, CL 1500, RFFE, ASTM B564 UNS N04400, ASME B16.5, L=305 mm O1ACAZZPRFAN71AAX
O465 40 - 40 / - Thermowell, CL 1500, RFFE, ASTM B564 UNS N04400, ASME B16.5, L=355 mm O1ACAZZPRFAN71ABB
O470 40 - 40 / - Thermowell, CL 1500, RFFE, ASTM B564 UNS N04400, ASME B16.5, L=405 mm O1ACAZZPRFAN71ABC
O475 40 - 40 / - Thermowell, CL 1500, RFFE, ASTM B564 UNS N04400, ASME B16.5, L=455 mm O1ACAZZPRFAN71ABD
Flanged Fittings
H480 15 - 40 / - Orifice Meter Run, ASME B16.36, CL 300, RF, ASTM B564 UNS N04400, ASTM A350 H1CABDIRFAN7BACZ
Grade LF2, Class 1 End Flanges, Low Temp
Gaskets
G485 750 - 1200 / - Gasket camprofile, BS EN 12560 Part 6, CL 300, RF, AISI 316, ASME B16.47 Series A, G1AB1ACIRFA1AXBAAA
Graphite SS Centring Ring, WT 4 mm
G486 15 - 600 / - Spiral Wound Gskt, ASME B16.20, CL 300, RF, AISI 316, ASME B16.5, Graphite CS GSWABAIRFA1AX1AAL
Centring-/SS Inner Ring, WT 4.5 mm
G487 15 - 80 / - Spiral Wound Gskt, ASME B16.20, CL 600, RF, AISI 316, ASME B16.5, Graphite CS GSWABALRFA1AX1AAL
Centring-/SS Inner Ring, WT 4.5 mm
Bolts & Nuts
L495 15 - 50 / - Std Blt & 2 Hex Nut, BS 4882, ASTM A193-B7 Bolts/Studs/ASTM A194-2H Nuts LS1B1AAA1ANZZZZ
L496 15 - 50 / - Std Blt & 2 Hex Nut, BS 4882, ASTM A193-B7 Bolts/Studs/ASTM A194-2H Nuts, Zn-Ni LS1B1AAA1ANBAAA
Electro-Plated with PTFE Top Coat
Spectacle Blinds & Spacers
D500 15 - 600 / - Spade, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 60, B16.5 DBPABMIRTAEY1AAD
D505 15 - 600 / - Spade, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 65, B16.5 DBPABMIRTAEZ1AAD
D510 15 - 600 / - Spade, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 70, B16.5 DBPABMIRTAF11AAD
D515 750 - 1200 / - Spade, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 70, B16.47 Sr. A DBPABMIRTAF11ADH
D520 15 - 600 / - Spacer ring, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 60, B16.5 DBSABMIRTAEY1AAD
D525 15 - 600 / - Spacer ring, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 65, B16.5 DBSABMIRTAEZ1AAD
D530 15 - 600 / - Spacer ring, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 70, B16.5 DBSABMIRTAF11AAD
D535 750 - 1200 / - Spacer ring, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 60, B16.47 Sr. A DBSABMIRTAEY1ADH
D540 750 - 1200 / - Spacer ring, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 65, B16.47 Sr. A DBSABMIRTAEZ1ADH
D545 750 - 1200 / - Spacer ring, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 70, B16.47 Sr. A DBSABMIRTAF11ADH
D550 15 - 350 / - Spectacle Blind, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 60, B16.5 DF8ABMIRTAEY1AAD
D555 15 - 350 / - Spectacle Blind, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 65, B16.5 DF8ABMIRTAEZ1AAD
D560 15 - 350 / - Spectacle Blind, ASME B16.48, CL 300, RFTBE, ASTM A516 Grade 70, B16.5 DF8ABMIRTAF11AAD
Miscellaneous Piping
MP565 50 - 400 / - Y-Strainer, CL 300, RF, ASTM A106-B, 3 mm CA, Sieve: AISI 316 MPSYAZZIRFZZACR1ABG
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 6 / 12

90 Degree BRANCH CONNECTION

Legend and chart

Branch Table: CLASS3C605_BR Legend:

BRANCH SIZES A Flangeolet/Nippolet Notes 65
1200 T E Red. Tee
1050 E T T Equal Tee
900 E E T W Weldolet
750 E E E T
600 E E E E T
500 W W E E E T
450 W W E E E E T
400 W W W E E E E T
350 W W W W E E E E T
300 W W W W E E E E E T
250 W W W W W W E E E E T
200 W W W W W W W W E E E T
150 W W W W W W W W W E E E T
100 W W W W W W W W W W E E E T
80 W W W W W W W W W W W W E E T
50 W W W W W W W W W W W W W E E T
40 A A A A A A A A A A A A A A A E T
25 A A A A A A A A A A A A A A A E E T
20 A A A A A A A A A A A A A A A A E E T
15 A A A A A A A A A A A A A A A A A E E T
1200 1050 900 750 600 500 450 400 350 300 250 200 150 100 80 50 40 25 20 15
RUN SIZES
NOTES:
01 Design limits acc. to ASME B16.5 flange rating mat. grp 1.1.
04 For bending of pipe see PTS 31.38.01.31.

05 For basis of design see PTS 31.38.01.10.

08 Piston type check valves (DN 15-40) for horizontal mounting only.

12 The use of triple eccentric butterfly valves and dual plate check valves is considered most economical. Use gate valves and swing check valves
only where fouling and abrasion are negatively affecting their functionality.

28 Piping class design meets full vacuum at ambient temperature condition.

65 Selection of flangeolet/nippolet will be based on service and project requirements.

66 Please refer to MAR documents for MAR details.
96 Use of coated bolt sets should be considered when exposed to marine environments.
97 The use of red. bore ball valves is considered most economical. Use full bore ball valves only when necessary for process/operating requirements.
156 For Valves that have the same size range with several options of item code, the first item code should be used, the option of materials e.g.
A105/A216 WCB/A216 WCC as indicated in the datasheet.
157 For components which have two (2) datasheets, CONTRACTOR is required to refer to the applicable datasheet for details.
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 7 / 12
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200

Pipes & Tubes

P5 PAATFPZPEEX 0F3Q 0H3Q 1A3Q 1F3Q
P10 PAATFPZBEEX 2A3K 3A3K 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G 1T3G 2K3G 2P3G
P15 PAATEMZBEZZ 1R3G 1T3G 2K3G 2P3G
P20 PAATEMZPEZZ 3K0G 3R0L 4M0P
P25 PAATEGZPEZZ 4T0R
P30 PAATFRZPEEX 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G
P35 PAATFRZPEET 1T3G 2K3G 2P3G
Ball Valves
VB100 VEAWATFRFAZCAL ZZ0F ZZ0H ZZ1A ZZ1F
VB105 VEAWBKFRFAZCAL ZZ0F ZZ0H ZZ1A ZZ1F
VB110 VEAWBLFRFAZCAL ZZ0F ZZ0H ZZ1A ZZ1F
VB115 VGAWATFRFAZCAL ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
VB120 VGAWBKFRFAZCAL ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
VB125 VGAWBLFRFAZCAL ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A
VB130 VDAXATFRFAWCAJ ZZ2A ZZ3A ZZ4A
VB131 VDAXBKFRFAWCAJ ZZ2A ZZ3A ZZ4A
VB132 VDAXBLFRFAWCAJ ZZ2A ZZ3A ZZ4A
VB135 VDAXATFRFAWBAJ ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VB136 VDAXBKFRFAWBAJ ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VB141 VDAXBLFRFAWBAJ ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VB145 VCAXATFRFAWCAJ ZZ3A ZZ4A ZZ6A
VB146 VCAXBKFRFAWCAJ ZZ3A ZZ4A ZZ6A
VB147 VCAXBLFRFAWCAJ ZZ3A ZZ4A ZZ6A
VB150 VCAXATFRFAWBAJ ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VB151 VCAXBKFRFAWBAJ ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VB156 VCAXBLFRFAWBAJ ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Butterfly Valves
VY160 LFBUATFRFADBNC JY8A JY1K JY1M JY1P JY1R JY1T JY2K JY2P JY3K JY3R JY4M JY4T
VY165 LFBUBKFRFADBNC JY8A JY1K JY1M JY1P JY1R JY1T JY2K JY2P JY3K JY3R JY4M JY4T
VY170 LFBUBLFRFADBNC JY8A JY1K JY1M JY1P JY1R JY1T JY2K JY2P JY3K JY3R JY4M JY4T
Check Valves
VC175 LRBDATFRFEN HC1M HC1P HC1R HC1T HC2K HC2P
VC176 LRBDBKFRFEN HC1M HC1P HC1R HC1T HC2K HC2P
VC177 LRBDBLFRFEN HC1M HC1P HC1R HC1T HC2K HC2P
VC178 LRBDANFRFEN HC1M HC1P HC1R HC1T HC2K HC2P
VC180 LRBDATFRFEN GW3K GW3R GW4M GW4T
VC181 LRBDBKFRFEN GW3K GW3R GW4M GW4T
VC186 LRBDBLFRFEN GW3K GW3R GW4M GW4T
VC191 LRBDANFRFEN GW3K GW3R GW4M GW4T
VC200 LKBEATFRFAJCZ ZZ0F ZZ0H ZZ1A ZZ1F
VC201 LKBECBHSWAJCZ ZZ0F ZZ0H ZZ1A ZZ1F
VC205 LNBBATFRFAJZZ ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VC210 LNBBBKFRFAJZZ ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
VC215 LNBBBLFRFAJZZ ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
Gate Valves
VG225 VKBJATFRFAJEHR ZZ0F ZZ0H ZZ1A ZZ1F
VG226 VKBJATHSWAJEHR ZZ0F ZZ0H ZZ1A ZZ1F
VG230 VPBHATFRFAJEHR ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P
VG231 VPBHBKFRFAJEHR ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P
VG232 VPBHBLFRFAJEHR ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P
VG235 VPBHATFRFAJBHR ZZ1R ZZ1T ZZ2K ZZ2P
VG245 VPBHBKFRFAJBHR ZZ1R ZZ1T ZZ2K ZZ2P
VG255 VPBHBLFRFAJBHR ZZ1R ZZ1T ZZ2K ZZ2P
Globe Valves
VL265 VTBQCBFRFAJEKM ZZ0F ZZ0H ZZ1A ZZ1F
VL266 VTBQCBHSWAJEKM ZZ0F ZZ0H ZZ1A ZZ1F
VL270 VUBNCBFRFAJEKM ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A
VL275 VUBNDAFRFAJEKM ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A
VL280 VUBNDBFRFAJEKM ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A
Monoflange
VB290 VBAWDRFRSAPAAA ZZ0F
VB291 VBAWDRFRBAPAAA ZZ0F
VB292 VBAWDRFRFAPAAA ZZ0F
VB293 VBAWDRFRNAPAAA ZZ0F
VB294 VBAWDRFRSAUAAA ZZ0F
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 8 / 12
Nominal Pipe Size
Short Code PMRC 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600 750 900 1050 1200

Monoflange
VB295 VBAWDRFRBAUAAA ZZ0F
VB296 VBAWDRFRFAUAAA ZZ0F
VB297 VBAWDRFRNAUAAA ZZ0F
Flanges
F300 FEALDCFRF ZZ0F ZZ0H ZZ1A ZZ1F ZZ2A ZZ3A ZZ4A ZZ6A ZZ8A ZZ1K ZZ1M ZZ1P ZZ1R ZZ1T ZZ2K ZZ2P
F305 FEAKDCFRF ZZ3K ZZ3R ZZ4M ZZ4T
F310 FFALDCFFLBZ 1F3Q
F315 FLALDCFRFZZ 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G 1T3G 2K3G 2P3G
F320 FLAKDCFRFZZ 3K0G 3R0L 4M0P 4T0R
F325 FGAJDCGRFZZ 2A3K 3A3K
F330 FGAJDCFRFZZ 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G 1T3G 2K3G 2P3G
BW Fittings
B335 NBAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G 1T3G 2K3G 2P3G
B340 NBAFHRBEAC 3K0G 3R0L 4M0P
B345 NBAFHNBEAC 4T0R
B350 NCAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G 1T3G 2K3G 2P3G
B355 NCAFHRBEAC 3K0G 3R0L 4M0P
B360 NCAFHNBEAC 4T0R
B365 NAAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G 1T3G 2K3G 2P3G 3K0G 3R0L 4M0P
B370 NAAFLEBEAJ 4T0R
B385 NHAFKRBEAN 0F3Q 0H3Q 1A3Q 1F3Q 2A3K 3A3K 4A3G 6A3G 8A3G 1K3G 1M3G 1P3G 1R3G 1T3G 2K3G 2P3G
B390 NHAFHRBEAC 3K0G 3R0L 4M0P
B395 NHAFHNBEAH 4T0R
Flanged Fittings
H480 NLAEDNFRF BS0F BS0H BS1A BS1F
Gaskets
G485 GAANDUFRFEJ 3K3K 3R3R 4M4M 4T4T
G486 GEASDUFRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D 4A0D 6A0D 8A0D 1K0D 1M0D 1P0D 1R0D 1T0D 2K0D 2P0D
G487 GEASDUGRFDJ 0F0D 0H0D 1A0D 1F0D 2A0D 3A0D
Spectacle Blinds & Spacers
D500 FAAMGVFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P AR1R AR1T AR2K AR2P
D505 FAAMGWFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P AR1R AR1T AR2K AR2P
D510 FAAMGXFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P AR1R AR1T AR2K AR2P
D515 FAAMGXFRT AT3K AT3R AT4M AT4T
D520 FBAMGVFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P AR1R AR1T AR2K AR2P
D525 FBAMGWFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P AR1R AR1T AR2K AR2P
D530 FBAMGXFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P AR1R AR1T AR2K AR2P
D535 FBAMGVFRT AT3K AT3R AT4M AT4T
D540 FBAMGWFRT AT3K AT3R AT4M AT4T
D545 FBAMGXFRT AT3K AT3R AT4M AT4T
D550 FCAMGVFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P
D555 FCAMGWFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P
D560 FCAMGXFRT AR0F AR0H AR1A AR1F AR2A AR3A AR4A AR6A AR8A AR1K AR1M AR1P
Miscellaneous Piping
MP565 PBKSFRFZ FC2A FC3A FC4A FC6A FC8A FC1K FC1M FC1P FC1R
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 9 / 12

Reducing Component
Run x Branch Concentric Reducer Eccentric Reducer Flangeolet Nippolet Reducing Tee Weldolet

20 x 15 NEAFKRBEAN0H3Q0F3Q NFAFKRBEAN0H3Q0F3Q NJAFKRBEAN0H3Q0F3Q

25 x 15 NEAFKRBEAN1A3Q0F3Q NFAFKRBEAN1A3Q0F3Q NJAFKRBEAN1A3Q0F3Q
25 x 20 NEAFKRBEAN1A3Q0H3Q NFAFKRBEAN1A3Q0H3Q NJAFKRBEAN1A3Q0H3Q
40 x 15 NEAFKRBEAN1F3Q0F3Q NFAFKRBEAN1F3Q0F3Q NMAGDCFRFZZ1F0F3Q NNAGDCPECG1F3Q0F3Q
40 x 20 NEAFKRBEAN1F3Q0H3Q NFAFKRBEAN1F3Q0H3Q NJAFKRBEAN1F3Q0H3Q
40 x 25 NEAFKRBEAN1F3Q1A3Q NFAFKRBEAN1F3Q1A3Q NJAFKRBEAN1F3Q1A3Q
50 x 15 NMAGDCFRFZZ2A0F3K NNAGDCPECG2A3K0F3Q
50 x 20 NEAFKRBEAN2A3K0H3Q NFAFKRBEAN2A3K0H3Q NMAGDCFRFZZ2A0H3K NNAGDCPECG2A3K0H3Q
50 x 25 NEAFKRBEAN2A3K1A3Q NFAFKRBEAN2A3K1A3Q NJAFKRBEAN2A3K1A3Q
50 x 40 NEAFKRBEAN2A3K1F3Q NFAFKRBEAN2A3K1F3Q NJAFKRBEAN2A3K1F3Q
80 x 15 NMAGDCFRFZZ3A0F3K NNAGDCPECG3A3K0F3Q
80 x 20 NMAGDCFRFZZ3A0H3K NNAGDCPECG3A3K0H3Q
80 x 25 NMAGDCFRFZZ3A1A3K NNAGDCPECG3A3K1A3Q
80 x 40 NEAFKRBEAN3A3K1F3Q NFAFKRBEAN3A3K1F3Q NMAGDCFRFZZ3A1F3K NNAGDCPECG3A3K1F3Q
80 x 50 NEAFKRBEAN3A3K2A3K NFAFKRBEAN3A3K2A3K NJAFKRBEAN3A3K2A3K
100 x 15 NMAGDCFRFZZ4A0F3G NNAGDCPECG4A3G0F3Q
100 x 20 NMAGDCFRFZZ4A0H3G NNAGDCPECG4A3G0H3Q
100 x 25 NMAGDCFRFZZ4A1A3G NNAGDCPECG4A3G1A3Q
100 x 40 NEAFKRBEAN4A3G1F3Q NFAFKRBEAN4A3G1F3Q NMAGDCFRFZZ4A1F3G NNAGDCPECG4A3G1F3Q
100 x 50 NEAFKRBEAN4A3G2A3K NFAFKRBEAN4A3G2A3K NJAFKRBEAN4A3G2A3K
100 x 80 NEAFKRBEAN4A3G3A3K NFAFKRBEAN4A3G3A3K NJAFKRBEAN4A3G3A3K
150 x 15 NMAGDCFRFZZ6A0F3G NNAGDCPECG6A3G0F3Q
150 x 20 NMAGDCFRFZZ6A0H3G NNAGDCPECG6A3G0H3Q
150 x 25 NMAGDCFRFZZ6A1A3G NNAGDCPECG6A3G1A3Q
150 x 40 NMAGDCFRFZZ6A1F3G NNAGDCPECG6A3G1F3Q
150 x 50 NKAGDCBEZZ6A3G2A3K
150 x 80 NEAFKRBEAN6A3G3A3K NFAFKRBEAN6A3G3A3K NJAFKRBEAN6A3G3A3K
150 x 100 NEAFKRBEAN6A3G4A3G NFAFKRBEAN6A3G4A3G NJAFKRBEAN6A3G4A3G
200 x 15 NMAGDCFRFZZ8A0F3G NNAGDCPECG8A3G0F3Q
200 x 20 NMAGDCFRFZZ8A0H3G NNAGDCPECG8A3G0H3Q
200 x 25 NMAGDCFRFZZ8A1A3G NNAGDCPECG8A3G1A3Q
200 x 40 NMAGDCFRFZZ8A1F3G NNAGDCPECG8A3G1F3Q
200 x 50 NKAGDCBEZZ8A3G2A3K
200 x 80 NKAGDCBEZZ8A3G3A3K
200 x 100 NEAFKRBEAN8A3G4A3G NFAFKRBEAN8A3G4A3G NJAFKRBEAN8A3G4A3G
200 x 150 NEAFKRBEAN8A3G6A3G NFAFKRBEAN8A3G6A3G NJAFKRBEAN8A3G6A3G
250 x 15 NMAGDCFRFZZ1K0F3G NNAGDCPECG1K3G0F3Q
250 x 20 NMAGDCFRFZZ1K0H3G NNAGDCPECG1K3G0H3Q
250 x 25 NMAGDCFRFZZ1K1A3G NNAGDCPECG1K3G1A3Q
250 x 40 NMAGDCFRFZZ1K1F3G NNAGDCPECG1K3G1F3Q
250 x 50 NKAGDCBEZZ1K3G2A3K
250 x 80 NKAGDCBEZZ1K3G3A3K
250 x 100 NEAFKRBEAN1K3G4A3G NFAFKRBEAN1K3G4A3G NJAFKRBEAN1K3G4A3G
250 x 150 NEAFKRBEAN1K3G6A3G NFAFKRBEAN1K3G6A3G NJAFKRBEAN1K3G6A3G
250 x 200 NEAFKRBEAN1K3G8A3G NFAFKRBEAN1K3G8A3G NJAFKRBEAN1K3G8A3G
300 x 15 NMAGDCFRFZZ1M0F3G NNAGDCPECG1M3G0F3Q
300 x 20 NMAGDCFRFZZ1M0H3G NNAGDCPECG1M3G0H3Q
300 x 25 NMAGDCFRFZZ1M1A3G NNAGDCPECG1M3G1A3Q
300 x 40 NMAGDCFRFZZ1M1F3G NNAGDCPECG1M3G1F3Q
300 x 50 NKAGDCBEZZ1M3G2A3K
300 x 80 NKAGDCBEZZ1M3G3A3K
300 x 100 NKAGDCBEZZ1M3G4A3G
300 x 150 NEAFKRBEAN1M3G6A3G NFAFKRBEAN1M3G6A3G NJAFKRBEAN1M3G6A3G
300 x 200 NEAFKRBEAN1M3G8A3G NFAFKRBEAN1M3G8A3G NJAFKRBEAN1M3G8A3G
300 x 250 NEAFKRBEAN1M3G1K3G NFAFKRBEAN1M3G1K3G NJAFKRBEAN1M3G1K3G
350 x 15 NMAGDCFRFZZ1P0F3G NNAGDCPECG1P3G0F3Q
350 x 20 NMAGDCFRFZZ1P0H3G NNAGDCPECG1P3G0H3Q
350 x 25 NMAGDCFRFZZ1P1A3G NNAGDCPECG1P3G1A3Q
350 x 40 NMAGDCFRFZZ1P1F3G NNAGDCPECG1P3G1F3Q
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 10 / 12

Run x Branch Concentric Reducer Eccentric Reducer Flangeolet Nippolet Reducing Tee Weldolet

350 x 50 NKAGDCBEZZ1P3G2A3K
350 x 80 NKAGDCBEZZ1P3G3A3K
350 x 100 NKAGDCBEZZ1P3G4A3G
350 x 150 NEAFKRBEAN1P3G6A3G NFAFKRBEAN1P3G6A3G NKAGDCBEZZ1P3G6A3G
350 x 200 NEAFKRBEAN1P3G8A3G NFAFKRBEAN1P3G8A3G NJAFKRBEAN1P3G8A3G
350 x 250 NEAFKRBEAN1P3G1K3G NFAFKRBEAN1P3G1K3G NJAFKRBEAN1P3G1K3G
350 x 300 NEAFKRBEAN1P3G1M3G NFAFKRBEAN1P3G1M3G NJAFKRBEAN1P3G1M3G
400 x 15 NMAGDCFRFZZ1R0F3G NNAGDCPECG1R3G0F3Q
400 x 20 NMAGDCFRFZZ1R0H3G NNAGDCPECG1R3G0H3Q
400 x 25 NMAGDCFRFZZ1R1A3G NNAGDCPECG1R3G1A3Q
400 x 40 NMAGDCFRFZZ1R1F3G NNAGDCPECG1R3G1F3Q
400 x 50 NKAGDCBEZZ1R3G2A3K
400 x 80 NKAGDCBEZZ1R3G3A3K
400 x 100 NKAGDCBEZZ1R3G4A3G
400 x 150 NKAGDCBEZZ1R3G6A3G
400 x 200 NEAFKRBEAN1R3G8A3G NFAFKRBEAN1R3G8A3G NKAGDCBEZZ1R3G8A3G
400 x 250 NEAFKRBEAN1R3G1K3G NFAFKRBEAN1R3G1K3G NJAFKRBEAN1R3G1K3G
400 x 300 NEAFKRBEAN1R3G1M3G NFAFKRBEAN1R3G1M3G NJAFKRBEAN1R3G1M3G
400 x 350 NEAFKRBEAN1R3G1P3G NFAFKRBEAN1R3G1P3G NJAFKRBEAN1R3G1P3G
450 x 15 NMAGDCFRFZZ1T0F3G NNAGDCPECG1T3G0F3Q
450 x 20 NMAGDCFRFZZ1T0H3G NNAGDCPECG1T3G0H3Q
450 x 25 NMAGDCFRFZZ1T1A3G NNAGDCPECG1T3G1A3Q
450 x 40 NMAGDCFRFZZ1T1F3G NNAGDCPECG1T3G1F3Q
450 x 50 NKAGDCBEZZ1T3G2A3K
450 x 80 NKAGDCBEZZ1T3G3A3K
450 x 100 NKAGDCBEZZ1T3G4A3G
450 x 150 NKAGDCBEZZ1T3G6A3G
450 x 200 NKAGDCBEZZ1T3G8A3G
450 x 250 NEAFKRBEAN1T3G1K3G NFAFKRBEAN1T3G1K3G NJAFKRBEAN1T3G1K3G
450 x 300 NEAFKRBEAN1T3G1M3G NFAFKRBEAN1T3G1M3G NJAFKRBEAN1T3G1M3G
450 x 350 NEAFKRBEAN1T3G1P3G NFAFKRBEAN1T3G1P3G NJAFKRBEAN1T3G1P3G
450 x 400 NEAFKRBEAN1T3G1R3G NFAFKRBEAN1T3G1R3G NJAFKRBEAN1T3G1R3G
500 x 15 NMAGDCFRFZZ2K0F3G NNAGDCPECG2K3G0F3Q
500 x 20 NMAGDCFRFZZ2K0H3G NNAGDCPECG2K3G0H3Q
500 x 25 NMAGDCFRFZZ2K1A3G NNAGDCPECG2K3G1A3Q
500 x 40 NMAGDCFRFZZ2K1F3G NNAGDCPECG2K3G1F3Q
500 x 50 NKAGDCBEZZ2K3G2A3K
500 x 80 NKAGDCBEZZ2K3G3A3K
500 x 100 NKAGDCBEZZ2K3G4A3G
500 x 150 NKAGDCBEZZ2K3G6A3G
500 x 200 NKAGDCBEZZ2K3G8A3G
500 x 250 NKAGDCBEZZ2K3G1K3G
500 x 300 NEAFKRBEAN2K3G1M3G NFAFKRBEAN2K3G1M3G NJAFKRBEAN2K3G1M3G
500 x 350 NEAFKRBEAN2K3G1P3G NFAFKRBEAN2K3G1P3G NJAFKRBEAN2K3G1P3G
500 x 400 NEAFKRBEAN2K3G1R3G NFAFKRBEAN2K3G1R3G NJAFKRBEAN2K3G1R3G
500 x 450 NEAFKRBEAN2K3G1T3G NFAFKRBEAN2K3G1T3G NJAFKRBEAN2K3G1T3G
600 x 15 NMAGDCFRFZZ2P0F3G NNAGDCPECG2P3G0F3Q
600 x 20 NMAGDCFRFZZ2P0H3G NNAGDCPECG2P3G0H3Q
600 x 25 NMAGDCFRFZZ2P1A3G NNAGDCPECG2P3G1A3Q
600 x 40 NMAGDCFRFZZ2P1F3G NNAGDCPECG2P3G1F3Q
600 x 50 NKAGDCBEZZ2P3G2A3K
600 x 80 NKAGDCBEZZ2P3G3A3K
600 x 100 NKAGDCBEZZ2P3G4A3G
600 x 150 NKAGDCBEZZ2P3G6A3G
600 x 200 NKAGDCBEZZ2P3G8A3G
600 x 250 NKAGDCBEZZ2P3G1K3G
600 x 300 NJAFKRBEAN2P3G1M3G
600 x 350 NJAFKRBEAN2P3G1P3G
600 x 400 NEAFKRBEAN2P3G1R3G NFAFKRBEAN2P3G1R3G NJAFKRBEAN2P3G1R3G
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 11 / 12

Run x Branch Concentric Reducer Eccentric Reducer Flangeolet Nippolet Reducing Tee Weldolet

600 x 450 NEAFKRBEAN2P3G1T3G NFAFKRBEAN2P3G1T3G NJAFKRBEAN2P3G1T3G

600 x 500 NEAFKRBEAN2P3G2K3G NFAFKRBEAN2P3G2K3G NJAFKRBEAN2P3G2K3G
750 x 15 NMAGDCFRFZZ3K0F0G NNAGDCPECG3K0G0F3Q
750 x 20 NMAGDCFRFZZ3K0H0G NNAGDCPECG3K0G0H3Q
750 x 25 NMAGDCFRFZZ3K1A0G NNAGDCPECG3K0G1A3Q
750 x 40 NMAGDCFRFZZ3K1F0G NNAGDCPECG3K0G1F3Q
900 x 15 NMAGDCFRFZZ3R0F0L NNAGDCPECG3R0L0F3Q
900 x 20 NMAGDCFRFZZ3R0H0L NNAGDCPECG3R0L0H3Q
900 x 25 NMAGDCFRFZZ3R1A0L NNAGDCPECG3R0L1A3Q
900 x 40 NMAGDCFRFZZ3R1F0L NNAGDCPECG3R0L1F3Q
1050 x 15 NMAGDCFRFZZ4M0F0P NNAGDCPECG4M0P0F3Q
1050 x 20 NMAGDCFRFZZ4M0H0P NNAGDCPECG4M0P0H3Q
1050 x 25 NMAGDCFRFZZ4M1A0P NNAGDCPECG4M0P1A3Q
1050 x 40 NMAGDCFRFZZ4M1F0P NNAGDCPECG4M0P1F3Q
1200 x 15 NMAGDCFRFZZ4T0F0R NNAGDCPECG4T0R0F3Q
1200 x 20 NMAGDCFRFZZ4T0H0R NNAGDCPECG4T0R0H3Q
1200 x 25 NMAGDCFRFZZ4T1A0R NNAGDCPECG4T0R1A3Q
1200 x 40 NMAGDCFRFZZ4T1F0R NNAGDCPECG4T0R1F3Q

BOLTING

inch x mm PMRC inch x mm PMRC inch x mm PMRC inch x mm PMRC inch x mm PMRC
1/2 x 70 BAAAAAAA0F0Q 3/4 x 100 BAAAAAAA0H1A 7/8 x 140 BAAAAAAA0J1J 1-1/8 x 220 BAAAAAAA1B2E 1-1/4 x 250 BAAAAAAA1D2L

1/2 x 70 BAAAAAZZ0F0Q 3/4 x 100 BAAAAAZZ0H1A 7/8 x 140 BAAAAAZZ0J1J 1-1/8 x 220 BAAAAAZZ1B2E 1-1/4 x 250 BAAAAAZZ1D2L

1/2 x 80 BAAAAAAA0F0S 3/4 x 110 BAAAAAAA0H1C 7/8 x 170 BAAAAAAA0J1Q 1-1/4 x 190 BAAAAAAA1D1U 1-1/4 x 260 BAAAAAAA1D2N

1/2 x 80 BAAAAAZZ0F0S 3/4 x 110 BAAAAAZZ0H1C 7/8 x 170 BAAAAAZZ0J1Q 1-1/4 x 190 BAAAAAZZ1D1U 1-1/4 x 260 BAAAAAZZ1D2N

5/8 x 80 BAAAAAAA0G0S 3/4 x 120 BAAAAAAA0H1E 1 x 160 BAAAAAAA1A1N 1-1/4 x 200 BAAAAAAA1D2A 1-1/2 x 240 BAAAAAAA1F2J

5/8 x 80 BAAAAAZZ0G0S 3/4 x 120 BAAAAAZZ0H1E 1 x 160 BAAAAAZZ1A1N 1-1/4 x 200 BAAAAAZZ1D2A 1-1/2 x 240 BAAAAAZZ1F2J

5/8 x 90 BAAAAAAA0G0U 3/4 x 130 BAAAAAAA0H1G 1 x 190 BAAAAAAA1A1U 1-1/4 x 210 BAAAAAAA1D2C 1-1/2 x 290 BAAAAAAA1F2U

5/8 x 90 BAAAAAZZ0G0U 3/4 x 130 BAAAAAZZ0H1G 1 x 190 BAAAAAZZ1A1U 1-1/4 x 210 BAAAAAZZ1D2C 1-1/2 x 290 BAAAAAZZ1F2U

5/8 x 100 BAAAAAAA0G1A 3/4 x 140 BAAAAAAA0H1J 1-1/8 x 180 BAAAAAAA1B1S 1-1/4 x 230 BAAAAAAA1D2G 1-1/2 x 300 BAAAAAAA1F3A

5/8 x 100 BAAAAAZZ0G1A 3/4 x 140 BAAAAAZZ0H1J 1-1/8 x 180 BAAAAAZZ1B1S 1-1/4 x 230 BAAAAAZZ1D2G 1-1/2 x 300 BAAAAAZZ1F3A

5/8 x 130 BAAAAAAA0G1G 3/4 x 150 BAAAAAAA0H1L 1-1/8 x 210 BAAAAAAA1B2C 1-1/4 x 240 BAAAAAAA1D2J 1-5/8 x 350 BAAAAAAA1G3L

5/8 x 130 BAAAAAZZ0G1G 3/4 x 150 BAAAAAZZ0H1L 1-1/8 x 210 BAAAAAZZ1B2C 1-1/4 x 240 BAAAAAZZ1D2J 1-5/8 x 350 BAAAAAZZ1G3L
 Piping Material Specification Line Class : 3C605
Revision Number : 0
Page : 12 / 12

BOLTING

inch x mm PMRC inch x mm PMRC

1-5/8 x 450 BAAAAAAA1G4K 2 x 340 BAAAAAAA2A3J

1-5/8 x 450 BAAAAAZZ1G4K 2 x 340 BAAAAAZZ2A3J

1-3/4 x 300 BAAAAAAA1H3A 2 x 450 BAAAAAAA2A4K

1-3/4 x 300 BAAAAAZZ1H3A 2 x 450 BAAAAAZZ2A4K

1-3/4 x 310 BAAAAAAA1H3C 2 x 480 BAAAAAAA2A4N

1-3/4 x 310 BAAAAAZZ1H3C 2 x 480 BAAAAAZZ2A4N

1-3/4 x 370 BAAAAAAA1H3Q

1-3/4 x 370 BAAAAAZZ1H3Q

1-7/8 x 390 BAAAAAAA1J3U

1-7/8 x 390 BAAAAAZZ1J3U

1-7/8 x 500 BAAAAAAA1J4Q

1-7/8 x 500 BAAAAAZZ1J4Q

Thermowell flgd DN 40
Length Rating PMRC

230 Class 1500 NPDNKRFCK1F

255 Class 1500 NPDNKRFCJ1F
305 Class 1500 NPDNKRFCH1F
355 Class 1500 NPDNKRFCL1F
405 Class 1500 NPDNKRFCM1F
455 Class 1500 NPDNKRFCN1F