Wire Rope Wedge Sockets
To meet ASME A17.1 / CSA B44 • New York MEA approval #410-03-M
Wire rope wedge sockets
Part Rope size Dim (A) nom Dim (B) nom Thread and Usable Thread min Dim (C) nom
Number inches • mm inches • mm inches • mm Diameter inches • mm inches • mm
(+/- 3/16 • 5) (+/- 3/16 • 5) (+/- 3/8 • 10)
WSY-516-12 5/16 • 8 17-1/2 • 445 12-19/32 • 320 M12 7-7/8 • 200 8-27/32 • 225
WSY-516-18 5/16 • 8 23-3/4 • 605 18-7/8 • 480 M12 9-13/16 • 250 10-13/16 • 275
A
WSY-516-24 5/16 • 8 30-1/8 • 765 24-3/16 • 640 M12 15-3/4 • 400 16-23/32 • 425
WSY-38-12 3/8 • 9 to 10 17-1/2 • 445 12-19/32 • 320 M12 7-7/8 • 200 8-27/32 • 225
WSY-38-18 3/8 • 9 to 10 23-3/4 • 605 18-7/8 • 480 M12 9-13/16 • 250 10-13/16 • 275
WSY-38-24 3/8 • 9 to 10 30-1/8 • 765 24-3/16 • 640 M12 15-3/4 • 400 16-23/32 • 425
WSY-12-12-A 7/16 to 1/2 • 11 to 13 18 • 457 12-19/32 • 320 M20 7-7/8 • 200 8-27/32 • 225
WSY-12-18-A 7/16 to 1/2 • 11 to 13 24-3/8 • 619 18-7/8 • 480 M20 9-13/16 • 250 10-13/16 • 275
WSY-12-24-A 7/16 to 1/2 • 11 to 13 30-5/8 • 778 24-3/16 • 640 M20 15-3/4 • 400 16-23/32 • 425 B
WSY-12-30-A 7/16 to 1/2 • 11 to 13 36-7/8 • 937 30-1/2 • 800 M20 15-3/4 • 400 16-23/32 • 425
WSY-12-36-A 7/16 to 1/2 • 11 to 13 43-1/4 • 1099 36-13/16 • 960 M20 15-3/4 • 400 16-23/32 • 425
C
Wire Rope, Compensation
WSY-58-12 9/16 to 5/8 • 14 to 16 19-3/4 • 502 12-19/32 • 320 M20 7-7/8 • 200 8-27/32 • 225
WSY-58-18 9/16 to 5/8 • 14 to 16 26-1/8 • 664 18-7/8 • 480 M20 9-13/16 • 250 10-13/16 • 275
and Accessories
WSY-58-24 9/16 to 5/8 • 14 to 16 32-3/8 • 822 24-3/16 • 640 M20 15-3/4 • 400 16-23/32 • 425
WSY-58-30 9/16 to 5/8 • 14 to 16 38-3/4 • 984 30-1/2 • 800 M20 15-3/4 • 400 16-23/32 • 425
WSY-58-36 9/16 to 5/8 • 14 to 16 45 • 1143 36-13/16 • 960 M20 15-3/4 • 400 16-23/32 • 425
WSY-34-12 11/16 to 3/4 • 17.5 to 19 21-1/4 • 540 12-19/32 • 320 M24 7-7/8 • 200 8-27/32 • 225
WSY-34-18 11/16 to 3/4 • 17.5 to 19 27-1/2 • 699 18-7/8 • 480 M24 9-13/16 • 250 10-13/16 • 275
WSY-34-24 11/16 to 3/4 • 17.5 to 19 33-3/4 • 857 24-3/16 • 640 M24 15-3/4 • 400 16-23/32 • 425
WSY-34-30 11/16 to 3/4 • 17.5 to 19 39-3/4 • 1010 30-1/2 • 800 M24 15-3/4 • 400 16-23/32 • 425
WSY-34-36 11/16 to 3/4 • 17.5 to 19 46-1/4 • 1175 36-13/16 • 960 M24 15-3/4 • 400 16-23/32 • 425
Each wedge socket consists of the socket, rod, wedge, 2 nuts, 1 washer, 1 cotter pin and 2 retaining clips.
Draka wedge sockets are tested with steel core (IWRC) wire rope and exceed ASME A17.1 Rule 2.20.9 and all other applicable
safety codes.
Component Specifications:
Socket: Cast steel ASTM-A27, Grade 60-30 stress relieved
Rod: Rolled or forged steel ASTM 668
Wedge: Cast steel ASTM-A27, Grade 60-30
Governor rope wedge sockets
Part Description
Number
WSY-38-GOV 3/8 • 10 mm governor rope wedge socket, includes socket, wedge & 2 retaining clips, 14 mm mounting hole
WSY-12-GOV 1/2 • 13 mm governor rope wedge socket, includes socket, wedge & 2 retaining clips, 17.5 mm mounting hole
Use these items to maintain wire rope. See item for location in this catalog.
Rope Tensioning Load weighing DrakaLube rope Automatic
System - page 61 devices - pages 62 - 66 treatment - page 60 rope oiler - page 60
57
Wire Rope Wedge Sockets
Isolation bushings and Babbitt sockets
Rope isolation bushing springs - assemblies and components
Part Size and Description Spring length Spring O.D. Spring I.D.
Number inches • mm inches • mm inches • mm inches • mm
WS-SA-38 5/16 to 3/8 • 8 to 10 complete assembly n/a n/a n/a
WS-SA-12-A 7/16 to 1/2 • 11 to 13 complete assembly n/a n/a n/a
WS-SA-58 9/16 to 5/8 • 14 to 16 complete assembly n/a n/a n/a
WS-SA-34 11/16 to 3/4 • 17.5 to 19 complete assembly n/a n/a n/a
WS-IBUSH-38 5/16 to 3/8 • 8 to 10 bushing n/a n/a n/a
WS-IBUSH-12-A 7/16 to 1/2 • 11 to 13 bushing n/a n/a n/a
WS-IBUSH-58 9/16 to 5/8 • 14 to 16 bushing n/a n/a n/a
WS-IBUSH-34 11/16 to 3/4 • 17.5 to 19 bushing n/a n/a n/a
WS-SPR-38 5/16 to 3/8 • 8 to 10 bushing spring 4-13/16 • 122 (+/- 1/8 • 3) 1-5/16 • 33 (+/- 1/32 • 0.6) 11/16 • 17 (+/- 1/32 • 0.6)
WS-SPR-12 7/16 to 1/2 • 11 to 13 bushing spring 6-1/8 • 156 (+/- 9/64 • 3.5) 1-15/16 • 49.2 (+/- 1/32 • 0.7) 1 • 25.5 (+/- 1/32 • 0.7)
WS-SPR-58 9/16 to 5/8 • 14 to 16 bushing spring 6-7/8 • 176 (+/- 1/8 • 3) 2-1/2 • 64 (+/- 1/16 • 1.5) 1-1/4 • 32 (+/- 1/16 • 1.5)
WS-SPR-34 11/16 to 3/4 • 17.5 to 19 bushing spring 7-1/16 • 178 (+/-5/32 • 4) 3-11/32 • 85 (+/- 3/32 • 2.5) 2-9/16 • 65 (+/- 3/32 • 2.5)
Wire Rope, Compensation
WS-BUSH-38 5/16 to 3/8 • 8 to 10 bushing washer n/a n/a n/a
and Accessories
WS-BUSH-12-A 7/16 to 1/2 • 11 to 13 bushing washer n/a n/a n/a
WS-BUSH-58 9/16 to 5/8 • 14 to 16 bushing washer n/a n/a n/a
WS-BUSH-34 11/16 to 3/4 • 17.5 to 19 bushing washer n/a n/a n/a
Isolation bushing spring assemblies include 1 spring, 3 bushings and 2 washers. They DO NOT include the wedge socket.
Springs measured when relaxed.
Socket: Cast steel ASTM-A27, Grade 60-30 stress relieved
Rod: Rolled or forged steel ASTM 668
Wedge: Cast steel ASTM-A27, Grade 60-30
Babbitt sockets
Part For rope size Rod size Dim (A) nom Dim (B) nom
Number inches • mm inches • mm inches • mm
BSY-12-12 1/2 • 13 M20 18 • 457 12 • 305
BSY-12-18 1/2 • 13 M20 24 • 610 18 • 457
BSY-12-24 1/2 • 13 M20 30 • 762 24 • 610 A
BSY-58-12 5/8 • 16 M24 19 • 483 12 • 305
BSY-58-18 5/8 • 16 M24 25 • 635 18 • 457
BSY-58-24 5/8 • 16 M24 31 • 787 24 • 610
Babbitt sockets are special order and are not normally stocked.
Shackle: Forged carbon steel per JIS S35C or S38C equivalent to SAE 1035 or 1038, hot forged then normalized and tempered
Hex nuts: ASTM A563 Grade O
Cotter pin: Steel, per ANSI B5.20
58
Wedge Socket Components and Accessories
For wedge sockets on page 57
Wedge socket individual components
Part Size and Description
Number inches • mm
WS-NUT-38 5/16 to 3/8 • 8 to 10 nut
WS-NUT-12 7/16 to 1/2 • 11 to 13 nut
WS-NUT-58 9/16 to 5/8 • 14 to 16 nut
WS-NUT-34 11/16 to 3/4 • 17.5 to 19 nut
WS-CPIN-38 5/16 to 3/8 • 8 to 10 cotter pin
WS-CPIN-12 7/16 to 1/2 • 11 to 13 cotter pin
WS-CPIN-58 9/16 to 5/8 • 14 to 16 cotter pin
WS-CPIN-34 11/16 to 3/4 • 17.5 to 19 cotter pin
WS-WSHR-38 5/16 to 3/8 • 8 to 10 washer
WS-WSHR-12-A 7/16 to 1/2 • 11 to 13 washer
WS-WSHR-58 9/16 to 5/8 • 14 to 16 washer
WS-WSHR-34 11/16 to 3/4 • 17.5 to 19 washer
Wire Rope, Compensation
and Accessories
Wedge socket wedges
Part Size and Description
Number inches • mm
WS-WEDGE-516 5/16 • 8 wedge insert (green)
WS-WEDGE-3812-A 3/8 to 1/2 • 9 to 13 wedge insert (blue)
WS-WEDGE-58 9/16 to 5/8 • 14 to 16 wedge insert (red)
WS-WEDGE-34 11/16 to 3/4 • 17.5 to 19 wedge insert (yellow)
Wedge: Cast steel ASTM-A27, Grade 60-30
Wedge socket retaining clips
Part Size and Description
Number inches • mm
WS-CLIP-38 5/16 to 3/8 • 8 to 10 rope retaining clip
WS-CLIP-1258 7/16 to 5/8 • 11 to 16 rope retaining clip
WS-CLIP-34 11/16 to 3/4 • 17.5 to 19 rope retaining clip
Pulling grips - galvanized steel with rotating eye
Part For Wire Rope Weave length MBL
Number Diameters kN
03302016 6.3 - 12.4 mm 660 mm 20.5 kN
03302018 2.7 - 18.8 mm 810 mm 44.4 kN
03302044 6.3 - 12.4 mm 660 mm 20.5 kN
03302046 2.7 - 18.8 mm 810 mm 44.4 kN
Use these items to maintain wire rope. See item for location in this catalog.
Rope Tensioning Load weighing DrakaLube rope Automatic
System - page 61 devices - pages 62 - 66 treatment - page 60 rope oiler - page 60
59
