VS–01 SERIES
PREMIER VERTICAL STORAGE SYSTEMS
Chart’s VS-01 Series Storage Systems, available in liquid
nitrogen, oxygen or argon service are offered in a wide
range of sizes for applications requiring Maximum
Allowable Working Pressures of 175 and 250 psig (12 and
17 barg) as standard.
Our proprietary Composite Super Insulation™ system
gives you the competitive edge with high thermal
performance, extended hold times, low life-cycle costs
and lower weight to reduce operational and installation
costs. Chart leads the industry with an innovative modular
piping system designed for performance, durability and
Product Advantages
• Sizes, pressures and configurations to meet most applications
• Backed by an industry-leading 5-year vacuum warranty
• Leg design provides better access to anchor bolts for quicker installation
• Plumbing built in accordance with ASME B31.3 code and leak tested at 1.1 times the MAWP
• Long-life urethane paint system
• Inner vessel designed and built to ASME Section VIII Division 1 code
• Tank mounted vaporizer optional on the 525, 900 and 1500 gallon models (2000 SCFH)
Modular Piping Advantages
• Reduces your life-cycle costs by reducing the number of external piping joints, minimizing the
risk of external piping leaks and the cost to repair.
• Simple by design yet robust and able to support a broad range of customer applications.
• Combination pressure building/economizer regulator for easy pressure adjustment and
extended bonnet bronze control valves for ease of operation.
• Piping modules designed for ease-of-access to all operational control valves with stainless steel
interconnecting piping for improved durability.
VS–01 SERIES
PREMIER VERTICAL STORAGE SYSTEMS
Gross Capacity Net Capacity MAWP* Flow Capacity** Diameter Height Weight*** NER %/day NER %/day
Model Gal Liters Gal Liters psig bar SCFH Nm3/hr in mm in mm lbs. Kg in O 2 / Ar in N 2
VS 1500SC 1,640 6,208 1,580 5,981 250 17.2 9,000 237 66 1,676 196 4,978 6,200 2,818 .35 .56
175 12.1 11,100 4,990
VS 3000SC 3,150 11,924 3,030 11,470 250 17.2 18,000 473 86 2,184 228 5,791 12,800 5,806 .25 .40
175 12.1 19,900 9,026
VS 6000SC 6,010 22,750 5,770 21,842 250 17.2 18,000 4 73 86 2,184 383 9,728 21,500 9,752 .15 .24
175 12.1 29,400 13,364
VS 9000SC 9,360 35,431 8,990 34,031 250 17.2 42,000 1,104 114 2,896 348 8,840 32,300 14,682 .10 .16
175 12.1 35,200 16,000
VS 11000SC 11,410 43,192 10,960 41,488 250 17.2 42,000 1,104 114 2,896 407 10,338 38,700 17,591 .10 .16
175 12.1 41,700 18,955
VS 13000SC 13,470 50,989 13,060 49,437 250 17.2 42,000 1,104 114 2,896 466 11,837 45,700 20,773 .10 .16
175 12.1 48,000 21,818
VS 15000SC 15,520 58,750 15,060 57,008 250 17.2 42,000 1,104 114 2,896 525 13, 335 52,600 23,909 .10 .16
* MAWP - Maximum Allowable Working Pressure. 400, 500 psig tanks are available upon request ** Flow capacity rating down to a 20% contents level with a maximum fall of in tank
operating pressure of 15 psig (bar) *** Weights are for ASME designs (NER) = Normal Evaporation Rate
Nomenclature
K A Top Fill
F A H J B Bottom Fill
HCV-5 C Aux Liquid
VR-1 G D Gas Use C-1 Connection, Aux Liquid S-1 Strainer, Pressure Building
E Liquid Phase
F Vapor Phase C-2 Connection, Aux Vapor S-2 Strainer, Fill
VP-1 G Full Trycock C-3 Connection, Secondary Aux Liq. TSV-2 Thermal Safety Valve, Fill
H Vent C-4 Connection, Secondary Aux Vapor TSV-3 Thermal Safety Valve, Economizer
J Aux Vapor CV-1 Check Valve, Fill TSV-4 Thermal Safety Valve, PB Circuit
K Economizer
E
B
C D CV-3 Check Valve, Economizer VP-1 Vacuum Port
FC-1 Connection Fill VR-1 Vacuum Readout, Outer Vessel
HCV-1 Valve, Bottom Fill
HCV-2 Valve, Top Fill NOTE: Optional valves (not shown)
HCV-3 Valve, PB Inlet HCV-18 Valve, Liquid Withdrawal (From C-1)
C-2
HCV-4 Valve, Full Trycock HCV-19 Valve, Vapor Return (From C-2)
HCV-8 C-1 HCV-5 Valve, Vacuum Gauge Tube HCV-21 Valve, Sec Aux Liquid (From C-3)
HCV-10
HCV-9 HCV-20 HCV-7 Valve, Fill Line Drain HCV-22 Valve, Sec Aux Vapor (From C-4)
HCV-13
HCV-8 Valve, LI-1 Vapor Phase
PSV-1B LI-1 PCV-3
HCV-9 Valve, LI-1 Equalization *Dashed lines represent optional components
HCV-4 PI-1 VAP HCV-10 Valve, LI-1 Liquid Phase C-8 Connection, Customer Houseline
PSE-1B HCV-16B HCV-11 Valve, PB Outlet CV-2 Check Valve, Houseline
HCV-12 Valve, Vapor Vent HCV-16A Valve, Relief Line Purge
HCV-2 HCV-1 PI-2
C-8 HCV-31 CV-2 HCV-13 Valve, Product Supply HCV-16B Valve, Relief Line Purge
HCV-15 TSV-8 HCV-15 Valve, Safety Relief Selector HCV-20 Valve, Economizer Vent
HCV-3
S-2 HCV-32
C-4 TSV-2 HCV-17 Valve, Economizer HCV-30 Valve, Inlet Houseline
C-3 HCV-30
PSE-1A LI-1 Level Indicator, Inner Vessel HCV-31 Valve, Bypass Houseline
HCV-16A TSV-4
HCV-7 CV-1 PBC-1 Pressure Building Coil, Inr. Ves. HCV-32 Valve, Outlet Houseline
HCV-12 S-1 PCV-5
PCV-1 Pressure Control Valve PCV-3 Pressure Control Valve, Econo Vent
PSV-1A HCV-11 FC-1
PCV-1 PI-1 Pressure Indicator, Inner Vessel PCV-5 Pressure Control Valve, Houseline
CV-3 HCV-17
PSE-1A Pressure Safety Element, Inr Ves PI-2 Pressure Indicator, Houseline
TSV-3
PSE-1B Pressure Safety Element, Inr Ves TSV-8 Thermal Safety Valve, Houseline
PBC-1 PSV-1A Pressure Safety Valve, Inr Ves VAP Vaporizer, Product Withdrawal
PSV-1B Pressure Safety Valve, Inr Ves
Your Local Representative
Chart Inc.
U.S. : 1-800-400-4683
Worldwide: 1-952-758-4484
www.chartindustries.com
©2020 Chart Inc. P/N 14388350
