GENERAL & SM.

GOODS

General items & small goods

MOUTHPIECE BRUSHES
H21
O21 For reed
H22
instruments
H23 O22 For brass
instruments

MASTER DUSTER BENCH BRUSH

The master Duster is excellent for general
shop cleaning. VALVE BRUSHES

H21 Master Duster Bench Brush O23 For brass instruments

LONG HANDLED
PLATERS BRUSH BASSOON BODY LOCK PARTS
Long handled platers brush for cleaning work This is a one piece
to be plated or to use in removing hard to get at BASSOON BODY
buffing compound. Approximately LOCK with a spring
13” ( 330.2mm) long with 1” ( 25.4mm) bristles. loaded pin. The weak
link pin breaks off if
H22 Long Handled Platers Brush the instrument is taken
apart without
releasing the lock.
GLUE BRUSH Safer than the old style
two piece body lock.
For use with the glue pot on page 91.
M56 Bassoon Body Lock
H23 Hot Liquid Glue Brush M56A Replacement Pin and Spring

BASSOON CRUTCH ASSEMBLY

KEY BRUSH
1/2” (12.7mm) brush for cleaning under M57 Bassoon Crutch
woodwind keys. Assembly
H24 Key Brush
M57A Bassoon Crutch
CLEANING RODS Only

S70 For valve instruments. Made of steel. M57B Crutch Holder

S71 For trombone slides. Made of steel. Only
S72 For flute. Made of aluminum.
S73 For trombone slide cleaning w/handle
S74 For cornet and trumpet cleaning Ferree’s Tools, Inc.
(1-1/2” longer w/handle)
S75 For tuba/sousaphone. Made of Delrin. 1477 E. Michigan Ave.
S76 Piccolo cleaning rod. Made of Battle Creek, MI 49014-8950
aluminum.
168
 GENERAL & SM. GOODS
General ITEMS & small goods

GUITAR FRET WIRE HEAVY DUTY

MODULAR CABINETS
We do not normally sell supplies or tools for
guitar repair, even though every so often someone
asks about fret wires. Guitar repair is an entirely
other ball game from band instrument repair, so we
have decided not to even start something we are not
familiar with.
However, we inherited a large quantity of fret
wire. 3 sizes. Since this is not one of our usual
products, we are offering this at a very big savings
for you. The three sizes are:

T42, Standard Banjo fretwire, a bit smaller X18 with 36 Drawers

than pre-war Martin guitar wire, but with
Drawer Size: 2-3/4” W x 1-1/4” L x 5-7/8” D
more bulk than the smaller wire used on (69.8mm x 31.8mm x 149mm)
pre-war banjos.
Height: 9-3/4” (248mm)
T44, Fret wire for electric or acoustic Width: 18” (457mm)
guitar. Depth: 6” (152mm)

T46, For electric guitar. This fret wire is as X19 Drawers for X18
wide but much lower in height than modern X20 Cross Dividers for X19 Drawers
jumbo rock frets. It’s good for partial fret (Sold each or package of 25)
jobs, to match large worn frets.
X21 with 18 Drawers
All 1 Foot Lengths. X22 Drawers for X21
X23 Cross Dividers for X22 Drawers
(Sold each or package of 25)
J26 LAMP WITH MAGNIFER
Drawer Size: 2-3/4” x 2-1/2” x 5-7/8”
The magnifying glass on (69.8mm x 63.5mm x 149mm)
this unit is 4” (102mm) in Height: 9” (229mm)
diameter, has a focal length
of 13” (330mm) and three Width: 18” (457mm)
power magnification. Depth: 6” (152mm)
Both arms have flexible
ball sockets and are X17 with 30 Drawers
18” (457mm) long. A “C”
clamp base allows mounting
in many ways. Since the Drawer Size: 2” W x 4-1/2” L X 1-1/8” D
arms are flexible, the light
and magnifying glass can be Height: 8”
located to avoid interference with the work. The
Width: 11-3/16”
swivel sockets enable the light to be directed to any
angle. There is a durable “cool touch” shade which Depth: 5-1/8”
will prevent burns. This is a very strong, industrial
quality unit that is U/L approved. X17A Extra Drawers

J26 Lamp with Magnifer

169
GENERAL & SM. GOODS

General ITEMS & Small Goods

CLARINET BORE CLARINET ▪ FLUTE ▪ PICCOLO

CLEANING BRUSH SWABS

For cleaning clarinet bores.

H25 Clarinet Bore Brush Made of absorbent cotton.

SAX BORE CLEANING BRUSH O14 Clarinet Swab

O15 Flute Swab
O16 Piccolo Swab
H26 Extra stiff horsehair for cleaning sax
body bores.
O24 Alto Clarinet Swab
O25 Bass Clarinet Swab
H26A Sax bore cleaning brush with an
extension handle. Handle can be soldered O20 CHAMOIS SWAB
or pressed on.

FLEXIBLE WIRE CLEANING

O20 Chamois
A nickel plated, flexible coil with a stiff brush on Clarinet
each end. Different designs to clean different
Swab
Instruments.

O7A French horn cleaning brush, on one end

conical and one end round.

O7B Bassoon bocal cleaning brush. Brushes

O17-O19 OBOE SWAB
are sized to pass through with small reed
end. The wire is covered with plastic
tubing to prevent scratching the inside
of the bocal.

O9A Trombone cleaning brush.

O9B Cornet-Trumpet cleaning brush

R75 SAX NECK CLEANER O17 Oboe swab, double end

O18 Oboe swab set (2 single swabs)
Sax neck cleaner is a flexible coil with a stiff
brush on one end and a soft brush on the other. Fits
all saxophone necks. BASSOON SWABS
O19 Bassoon swab set; one thick, one thin
R75 Sax Neck Cleaner
170
 GENERAL & SM. GOODS
General items & small goods

L71 & L72 STERISOL GERMICIDE ML170 & M71 THUMB RESTS
Deodorizes ▪ Disinfects ▪ Cleans

Made especially for wind ML170 Thumb rest

instruments, mouthpieces only for clarinet and
and reeds. Useful in the oboe-approx. .400” at
studio, band room, repair body. Fits Bundy.
shop, etc. Concentrated.
M71 Clarinet thumb rest with screws
for Leblanc-appox. .270” at body, with
screws. Fits Vito.
L71 Concentrated Sterisol 2 oz (59ml)
makes 1 qt
L72 Concentrated Sterisol 8 oz (237ml) O26 SOUSAPHONE GRILLS
makes 1 gal (3.79L)
Easy to sell to band
directors, especially if
L73 & L74 SANIMIST they consider the cost
of removing a foreign
MOUTHPIECE DISINFECTANT object that is stuck
way down inside a
This product is from the
sousaphone. These
people that give us the old
grills fit inside
reliable Sterisol. Sanimist
sousaphone bells during pep rallies, parades,
is designed to disinfect an
football games or anytime there is a chance of a
instrument mouthpiece
practical joker playing basketball with the
with just a push of the
sousaphone bell as the basket. The grill has a handy
pump sprayer. Leaves
ring for easier insertion and removal
only a minty
aftertaste. The pump
sprayer eliminates the O26 Sousaphone Grill
need of harmful aerosol
dispensing cans. Also is a
very convenient way to O27 SOUSAPHONE HOLDER
get rid of the germs on a
mouthpiece. It comes in Attention band
either a 2 oz (59ml) or 8 oz (236ml) size. The directors, repairmen,
smaller size is convenient for carrying in an etc.. Ferree’s now
instrument case. The larger size for band directors has invented a way
or repair shops. to get that Sousa-
phone off the floor
L73 Sanimist disinfectant, 2 oz (59ml) size and out of the way.
L74 Sanimist disinfectant, 8 oz Clean up those band
(237ml) size rooms. Our steel holder mounts to the wall and has
plastic covered ends to keep from scratching the
sousaphone.
Call TOLL FREE to place your
order at 800-253-2261!! O27 Sousaphone Holder
171
GENERAL & SM. GOODS

General items & small goods

Z4 TOOL CHESTS Z30 TOOL CHESTS

26-5/8” long x 13-5/8” high x 8-1/2” deep
Metal tool chests. Reinforced case with boxed (67.6cm long x 346mm high x 216mm deep)
ends. Front panel slides out of the way under the Weighs 42 lbs (19kg)
drawers when the chest is open, but is used to lock
all the drawers when desired. Drawers slide easily
on compound slides that stop only when fully Eight
extended. Very strong. Felt lined drawers.
Adjustable partition in all drawers except bottom.
drawers
Protect your tool investment by protecting your and a top
tools from misuse and loss. till
Z4 Tool Chest
20-1/8” long x 13-5/8” high x 8-1/2” deep Z30 Tool Chest, wider model with an extra
(511mm long x 346mm high x 216mm deep)
Weighs 32 lbs (14.5kg)
drawer

Z32 Two Drawer Chest

Seven Two drawer model can be used alone or as a base
drawers for the Z4 or Z30. Felt lined top drawer. Both
and a top drawers lock simultaneously.
till 26-5/8” long x 9-1/2” high x 12-9/16” deep
(67.6cm long x 241mm high x 319mm deep)
Weighs 24 lbs (10.9kg)
Top drawer depth 1-1/2”, bottom 3-9/16”
(top 38.1mm, bottom 90.5mm)
PLASTIC BOXES
S2B LYRE SOCKETS
Heavy duty plastic yellow storage boxes. Much SOLDER-ON TYPE
stronger than the typical “variety” store type.
Convenient and easy to handle. Keeps pads or parts S2B Brass lyre socket
clean and easy to find. Tight fitting cover prevents
mixing if box is overturned. Ideal for storing pads,
small parts, taps, dies and springs. S5B FINGER RINGS
SOLDER-ON TYPE
G3A 6 section box
S5B Brass finger ring
8-1/4” long x 4-1/2” wide x 1-1/4” high Inside Diameter:
(209mm long x 114mm wide x 31.8mm high) .825”

G3C 18 section box

S13N REPLACEMENT PEARL
BUTTONS FOR CORNET AND
10-7/8” long x 6-3/4” wide x 1-3/4” high
(276mm long x 172mm wide x 44.5mm high) TRUMPET

S13N Nickel Replacement Pearl Button

www.ferreestools.com 6-32 thread
172
 GENERAL & SM. GOODS
General items & small goods

L40 MEDIUM DUTY BENCH VISE L38 LIGHT DUTY VACUUM VISE
A medium duty, This portable vise
swivel base vise with has a universal ball
4” (102mm) jaws. A join t with a
vise like this is positive lock that
necessary for general swivels 360°. It
and woodwind use. tilts up to 90°. The
It holds a wood rubber vacuum pad
mandrel securely, so will firmly grip any smooth, non-porous surface. V
the instrument will not move. grooved hardened jaws have a 3-5/8” (92.1mm)
capacity and are 3” (76mm) wide. Overall height is
L40 Medium Duty Bench Vise 6-1/4” (159mm) that folds to 3-3/4” (95.3mm).
Complete with rubber jaws for fragile work.
L14 & L14A V-BLOCK
L38 Vacuum Vise

L22 LEAD JAWS

Angled thick sheets
of soft rolled lead fit
over vise jaws to
protect fragile items.
Newly redesigned V-Block. 4” L (101.6mm), 1/8”
Holds round mandrels in any several repair thick.
position in a vise. Mandrels will not slip under
pressure. Now has a vertical groove for knuckle
L22 Lead Jaws
tools.
L14 V-Block
L14A V-Block with locking screws.
F26 HAND VISE
L41 HEAVY DUTY
FLOOR STAND
This stand gets your vise
away from the workbench
and makes the vise much
more useful. The stand
secures to the floor for
stability. Can also be used Used to hold small pieces when drilling, milling,
to mount a bench grinder grinding or polishing
or the Z2 band sander.
It has a 4” (102mm)
diameter pipe with 9” X
F26 Hand Vise
9” (229 x 229mm) plates on each end. The floor
plate is predrilled to make it easy for you to install.
Total height is 33” (83.8cm). It can be shipped by See L42 rod holding
UPS.
vise on page 25
L41 Heavy Duty Floor Stand
173
GENERAL & SM. GOODS

General items & small goods

E46 SMALL SLIDING CALIPER D110A & B SCREW EXTRACTOR

Will remove most

instrument screws that
are .125” (3.15mm) in
diameter or larger. Drill a
#51 drill size hole into the
center of the screw. Use a
larger drill bit where the
size of the screw allows.
Small Sliding Caliper, marked in inches and Insert the D110A or
millimeters. Handy for a multitude of jobs, D110B Screw Extractor
including measuring pads, pad cups and tenon and remove the screw.
joints.

E46 Small Sliding Caliper D110A Small Screw Extractor for Cornet,
Trumpet, Baritone, Saxes neck and
lyre.
STEEL RULERS D110B Medium Screw Extractor for Tuba,
Sousaphone bell screws, Drums, etc.

P24 TELESCOPING GAUGES

Satin chrome finish steel. Graduated in 8ths,

16ths and 32nds.

G97 6” (152mm) long by 3/4” (19mm) wide

G97M Same Size Metric Reading Ruler

G98 12” (305mm) long by 1” (25.4mm) wide

FLEXIBLE STAINLESS RULER These gauges are used with micrometers or dial
calipers for measuring inside diameters. They are
Stainless steel. Graduated in 32nds, 64ths, mm very useful when doing tenon repair work, or when
and .5mm. 12” (305mm) long 15/32” (11.9mm) determining valve casing sizes. Gauges feature satin
wide chrome finish, precision ground and polished
contact rods of hardened steel. A set comes
G99 Stainless Steel Ruler complete with vinyl case. Six gauges from
5/16” (7.9mm) thru 6” (152mm).

P24 Telescoping Gauges

World’s Largest Manufacturer
of Quality Band Instrument Call us toll free at
Repair Tools.
800-253-2261
174
 GENERAL & SM. GOODS
General items & small goods

DIAL CALIPERS DIVIDERS AND CALIPERS

Stainless steel hardened throughout with

measuring faces precision ground and micro lapped These spring dividers and calipers are preferred by
for ultimate accuracy. Scale surface has a satin toolmakers and other mechanics.
chrome finish with clear crisp engraved graduations
in inches or millimeters. Has a clamp for repetitive G12 4” (102mm) Spring Divider
settings. Protective case. G13 4” (102mm) Outside Caliper
G14 4” (102mm) Inside Caliper
G5A 4” length by .001”
G5B 10cm length by .05mm TWEEZERS
G24A 6” length by .001”
G24B 15cm length by .05mm

P19 & P20 MICROMETERS

These high quality
Mititoyo micrometers have
the anvil and spindle
hardened and precision
ground with micro-lap finish
on ends. Clear graduations
on satin chrome finish.
Positive locking clamp. Has a ratchet stop for exact
and repetitive readings. Quick and easy zero
E49 Plain steel, soldering tweezers,
adjustment. Protective case included.
inexpensive, 6” (152mm)
P19 0 thru 1” by .001” E50 Slide lock tweezers blunt smooth tips,
P20 0 thru 25mm by .01mm nickel plated 6-1/2” (165mm). Holds
parts snugly.
P18 STUDENT MICROMETER E51 Light, medium sharp point, made of plain
steel, 4-1/2” (114mm)
E52 Extra long curved smooth points. Nickel
plated. Handy to use. 6-1/2” (165mm)

Place your order 24 hours a day!!

Reads from 0 thru 1” by .001”. Cast steel frame.
Ratchet stop for exact readings. Satin chrome finish. Call~ 800-253-2261
Excellent value. Fax~ 269-965-7719
Email~ ferreestools@aol.com
P18 Student Micrometer
175
GENERAL & SM. GOODS

General items & small goods

FABRICUT H83 FINE WET AND DRY PAPER

Fabricut is emery cloth that appears like a window Sheets of extremely fine abrasive on waterproof
screen to be self cleaning. It is excellent for sanding paper. Excellent for sanding file marks or scratches
tenon corks on clarinet joints and for sax necks as off clarinet grafts, refinishing bassoons, guitars,
well. Sanding time will be decreased because the refacing mouthpieces, etc.. (400 grit)
cork particles will fall through the screen and not
hinder the abrasive action of the emery. Because it H83 Wet and Dry Paper
doesn’t load up, the fabricut lasts longer than regular
emery. The finer 400 grit may be used for lightly
cleaning brass tuning slides. Sold by strip or roll. CRYSTOLON OILSTONES
Fabricut is available in three grits,1-1/2” (38.1mm) For sharpening knives and other cutting edges.
wide and comes in 75 foot (22.9m) rolls or Made from Crystolon abrasive (fine silicon carbide)
15” (381mm) strips. and oil saturated. Can be used wet or dry.
6” X 2” X 5/8” thick (152mm x 50.8mm x 15.9mm
H101 220 grit roll H101A 220 grit strip thick).
H102 320 grit roll H102A 320 grit strip H77 Fine
H103 400 grit roll H103A 400 grit strip H78 Medium

EMERY CLOTH ABRASIVE TAPE AND CORD

Sand corks, refinish grenadilla wood and ebonite, You’ll find yourself reaching for these handy
smooth out brass parts. Removes file marks from products again and again. Especially useful for
keys before buffing. Finds hard to see dents in sanding in inaccessible places. They’re also excellent
brass. for cleaning up around solder fillets or cleaning up
keys that have been soldered. The flat tape is
ROLLS-1” (25.4mm) X 50 Yards (45.7m)
1/4” (6.4mm) wide and impregnated on all sides with
H110 80 grit roll H114 220 grit roll aluminum oxide abrasive in 150 grit size.
H111 120 grit roll H115 320 grit roll Both the tape and the cord can be used on metal,
wood or plastic.
H112 150 grit roll H116 400 grit roll
H113 180 grit roll
H80 Abrasive 1/4” (6.4mm) Tape, 50 ft.
STRIPS-1” (25.4mm) X 15” (381mm) (15.2m) Roll
H110A 80 grit strip H113A 180 grit strip H80A Abrasive 1/4” (6.4mm) Tape, 15”
H111A 120 grit strip H114A 220 grit strip (381mm) Strip
H112A 150 grit strip H115A 320 grit strip H81 Abrasive .040” (1mm) Cord, 50 ft.
(15.2mm) Roll
ROLLS-1” (25.4mm) X 50 Yards (45.7m) H81A Abrasive .040” (1mm) Cord, 15”
(381mm) Strip
H120 220 grit roll H122 400 grit roll
H121 320 grit roll H123 No abrasive
FOR FASTER SERVICE
USE YOUR CUSTOMER
Over 60 years of satisfying NUMBER
customers like you!!!
CALL 800-253-2261
176
 GENERAL & SM. GOODS
GENERAL ITEMS & SMALL GOODS

MOUTHPIECE ADAPTORS X195 DREMEL VARIABLE

SPEED MOTO-TOOL KIT
Built in speed
dial gives you
fingertip control,
5.000 through
28,000 rpm. Dial
slow speeds when
French Horn to Alto Horn working on soft
S3BA Brass materials, faster
S3SA Silver Plated speeds for
working on hard materials.
French Horn to Mellophone Model X195 DREMEL VARIABLE SPEED
S3BM Brass MOTO-TOOL lets you select the right speed for the
S3SM Silver Plated job. 100% ball bearing construction for long life
smooth operation. Permanent magnet motor gives
steady, dependable power. The durable storage case
MOUTHPIECE ADAPTORS holds 40 accessories.
QUANT. DESCRIP. QUANT. DESCRIP.
S3BTB
Adaptor to use tenor 1 Model 380 6 Wheel Points
trombone mouthpiece Variable Speed
on bass trombone Moto-Tool
1 Deluxe Kit Box 1 Dressing
Stone
6 Cut-off Wheels 1 Paste Brush
S3BT Adaptor to use cornet
mouthpiece on trumpet 7 Sanding 1 Polishing
receiver Wheels Stone
2 Engraving 1 Cup Brush
FLEXIBLE VINYL TUBING Cutter
1 1/8” (3.2mm) 2 Collets
Two sizes of flexible vinyl tubing to run from the Drill 1/8”(3.2mm)
&
gas valve to your Bunsen burner or blowpipe. This 3/32” (2.13m)
tubing is sold by the foot.
2 High Speed 1 Drum Sander
Cutter
O60 Vinyl tubing, 3/8” (9.5mm) O.D. X
1/4” (6.4mm) I.D. for blowpipes. 1 Wrench 2 Sanding Bands
O61 Vinyl tubing, 7/16” (11.1mm) O.D. X
5/16” (7.9mm) I.D. for Bunsen burners. 2 Mandrels 1 Finger Grip

2 Felt Polishing 1 1 Steel Saw

Wheels
FERREE’S TOOLS, INC.
1477 E. MICHIGAN AVE.
X195 Moto-Tool and Accessories, 115 volt
BATTLE CREEK, MI
49014-8950
177
178
 GENERAL & SM. GOODS
General items & small goods

TAP WRENCH DIE STOCKS

Adjustable tap wrench.
Top centered for use on
back center of a lathe
when that is revolving in
a chuck.

D108 Tap Wrench 13/16” (20.6mm) die stock to holds D210 dies
D108A Tap Wrench 1/4-1/2” D120D metric up to 4mm. 1” (25.4mm) holds 5mm
and up.
TAPS AND DIES
(DOMESTIC THREADS) D109 Die Stock 13/16” (20.6mm)
D109A Die Stock 1” (25.4mm)
We have all sizes of taps and dies available for
most musical instruments. Taps and dies are listed METRIC TAPS AND DIES
with corresponding drill sizes. Dies have
13/16” (20.6mm) outside diameter.
Tap Size Die Size
D200 Taps Drill No. D210 Dies D120T D120D
0-80 55 or 56 0-80 Woodwind Brasswind Woodwind Brasswind
1-56 54 1-56 1.6-.35 3.0-.60 1.6-.35 3.0-.60
1-64 53 1-64 1.7-.35 3.5-.60 1.7-.35 3.5-.60
1-72 53 1-72
2.0-.25 4.0-.70 2.0-.25 4.0-.70
2-56 50 2-56
2-64 50 2-64 2.0-.40 4.0-.75 2.0-.40 4.0-.75
3-48 47 3-48 2.2-.45 5.0-.80 2.2-.45 5.0-.80
3-56 45 3-56 2.5-.45 6.0-1.00 2.5-.45 6.0-1.00
4-36 44 4-36 3.0-.50 8.0-1.25 3.0-.50 8.0-1.25
4-40 43 4-40
4-48 42 4-48
5-40 38 5-40
5-44 37 5-44 D120A Metric Tap & Die Set 1.6-.35 thru 3.0-.50
6-32 36 6-32 D120B Metric Tap & Die Set 3.0-.60 thru 8.0-1.25
6-36 34 6-36
6-40 33 6-40
8-32 29 8-32 SCREW PITCH THREAD GAUGES
8-36 29 8-36
8-40 28 8-40
This gauge has 24
10-24 25 10-24
10-32 21 10-32 blades covering .025” to
12-24 17 12-24 6.mm pitch. For gauging
12-28 15 12-28 of American National or
12-32 13 12-32 U.S. Standard 60°
1/4-20 7 1/4-20 threads. Precision made
1/4-24(1” O.D.) 4 1/4-24 set of 51 screw pitches
5/8-27 5/8-27 combining all sizes from 4 to 84, including 11-1/2
7/8-27 7/8-27 and 27 Pipe Thread size in a case.
TAP AND DIE SETS
Complete set of domestic thread taps and dies in a G15 Thread Gauge
plastic box. G11 Metric Thread Gauge
D200D Set of Taps and Dies (No drills)
179
180
 GENERAL & SM. GOODS
GENERAL items & small goods

ALL PURPOSE FILES E30 FILE CLEANER

This combination
file card (for coarse
files) and brush (for
fine cut files) with a
specially designed
pick, is a handy file
cleaning tool.

E30 File Cleaner

Files to fill any technician’s needs. All types for
use on brass or nickel, and cork. G60 ADJUSTABLE
E19 8” Round, straight “O” cut JEWELERS
E20 10” Round, smooth
E21 10” Flat, bastard cut SAW FRAME
E22 8” Warding, second cut
E23 10” Flat, smooth cut Adjustable Jewelers Saw
E24 8” Cantsaw, single cut Frame. The finish is polished.
E25 10”, Pillar, smooth cut Blade length is 5” (127mm)
E26 6”, Double, slim taper, 3 corner overall length is
11-12” (292mm). Blade is
FILE HANDLES NOT included, see below.

Inexpensive file
G60
handles. A properly fitted Adjustable Jewelers Saw
handle means quicker, Frame
better work done easier
and safer. Two sizes.
D27 JEWELERS SAW BLADES
O11 Fits up to 6” (152mm) files
Jewelers saw blades, sizes 0, 2, 4, 6. Fine is 0 and
O12 Fits 6” (152mm) to 10” (254mm files) coarse is 6. Sold by the dozen.

D27 Jewelers Saw blades, sold by the dozen,

E28 HINGE TUBING FILES State size

R88 FILING BLOCK

An inexpensive
wood filing block
These files are cylindrically shaped and are used used to brace small
inside certain sizes of hinge tubing to take out dents parts while filing.
or sharp kinks. Use it in a
3/4” (19mm) bench
E28A 1/16” (1.6mm) file for clarinets, flutes, hole.
oboes
E28B 3/32” (2.4mm) file for saxophone R88 Filing Block
181
182
 GENERAL & SM. GOODS
GENERAL ITEMS & SMALL GOODS
*NEW* Z6 SYNTHETIC *NEW* Z8 MONEL ADDITIVE
LUBRICANT
It is important to use this Made specifically for Monel.
NEW Z6 synthetic It can be used on brass,
lubricant in all friction stainless, plated valves or
producing actions. This trombone slides. Use oil and
product, when mixed with cold cream (remove cold
your petroleum jelly is cream, apply Z8, work slides
Great! It makes all of your together, remove slides and
movements easier; wipe them off, then reapply
burnishing, rubbing or cold cream). This gives you
contouring. It also tends long lasting performance,
not to allow as much, if any, scratching of the raw without the recurring drag that sometimes occurs.
brass or lacquered surfaces. It is also very good with
silver plated surfaces. Z6 should be mandatory for Z8 1-1/4 oz
all burnishing jobs. Especially rod and ball work. Z8A Pint
Comes in 4 oz can. Z8B Quart
Z6 Synthetic Lubricant 4 oz
Z6A Pint T85 TUNE LUBE
Z6B Quart

T70 3M PROTECTOR STRIPS

These strips are a

breakthrough
product that can
keep the finish on a
horn in storage look-
ing as if it were just
polished. The strips
are effective
protection for silver, gold, copper and brass. Using this tune lube on your tuning slides makes
Protection can last as long as six months in a closed them work great. Formula includes our Z6 as a
area (as in a horn case). The product has already lubricant.
become popular with instrument manufacturers
around the world. You may have seen one of the T85 Individual size .5 oz
strips in new horn cases. Now this same protection is T85A Shop size 4 oz jar
available to the retailer as well. Using a protector
strip in a rental return after it has been cleaned and Notes from customers:
polished will insure that the horn will still be “Thanks for the tip. I followed the
gleaming, when you open the case, up to six months
instructions and 2 parts cleaned out in 2 days.
later.
3M Protector Strips work by absorbing airborne
Really great tip”...Thanks, Steve (CT).
contaminants which cause tarnish to form on silver
and other precious metals. The strips are completely
non-toxic. Simply place the strip in the case of the
Ferree’s Tools, Inc.
horn you wish to protect and forget if for up to six 1477 E. Michigan Ave.
months.
T70 3M Protector Strips Battle Creek, MI 49014
Sold by the dozen or hundred
183
GENERAL & SM. GOODS

General items & small goods

Q10 TRUMPET –CORNET LYRE CLARINET LYRES

Nickel plated with an
adjustable center ring for
wood or ebonite clarinets.

Q15M Lyre for Clarinet

middle joint
(wood/ebonite)
Q10S Straight
Q16M Middle joint ring
Q10B Bent-5/8” (15.9mm), 90° bend at
only for lyre
bottom of shank
Q16S Lyre ring screws

Q11 LONG STEM LYRES Q17 Lyre only. Nickel plated without the
center ring for metal Clarinets
Q11 Extra long straight lyre for Baritone,
Tuba and Sousaphone
Q19 FLUTE OR PICCOLO LYRES

TROMBONE LYRES

Q13A A d j u s t a b l e
Trombone lyre with
9/16” ring

Q13B A d j u s t a b l e
Trombone lyre with
3/4” ring
Q19 Wrist Flute or Piccolo lyre
Q12A 1 piece Trombone lyre with 9/16”ring

Q12B 1 piece Trombone lyre with 3/4” ring

ALTO, BASS CLARINET AND
Q14 SAXOPHONE LYRE BASSOON LYRES

Designed to fit the

built in socket on most
saxophones.

Q14 Saxophone
lyre Q21A Alto clarinet lyre
Q21B Bass clarinet lyre
Q22 Bassoon lyre
www.ferreestools.com
184
 GENERAL & SM. GOODS
General items & small goods

BASS CLARINET FLOOR PEGS L37 MOUTHPIECE REFACING KIT

Ferree’s has long

carried the Morgan
Mouthpiece Refac-
ing Kit. Designed by
Henri Selmer in the
1880’s and refined
by Ralph Morgan
over the years, the
set includes one
M70S Selmer floor peg assy. complete glass Direct Reading
M70L Leblanc floor peg assy. Gauge, one taper gauge, and five feeler gauges in
complete sizes .0015, .010, .024, .034 and .050. Also included
M70A Selmer rubber tip is an instruction booklet which walks you through
the various stages.
M70B Leblanc rubber tip
These are comparison tools. This job is all hand
M70C Selmer rod holder work. This work is a skilled art, a combination of
M70D Leblanc rod holder common sense and acquired skill, tempered with
good judgment and experience. You can not rush the
M70E Selmer wing screw work. Practice is perfection.
M70F Leblanc wing screw Sadly, Ralph Morgan passed away this past
M70G Selmer knurled nut summer, this was his gift to the woodwind
M70H Leblanc knurled nut aficionado.

M70J Selmer floor peg rod only L37 Mouthpiece Refacing Kit
M70K Leblanc floor peg rod only
Call for availability before ordering. Sold as a
NECK STRAPS kit ONLY. We DO NOT sell the individual parts
of the Mouthpiece Refacing kit separately.
Made of
g e n u i n e
leather. It has F24 SIX SIZE TUBE HOLE PUNCH
a plastic
neckpiece, durable cord, patented non-slip adjustable
slide. Each strap is individually boxed. Color is black.

O33 Saxophone Strap

O34 Alto, Bass Clarinet
or bassoon strap

Here is a genuine
leather sax strap with Six tube, revolving head to change hole sizes
an extra wide felt quickly. A spring automatically locks the tubes into
lined neckpiece. It is position. Made of durable cold-rolled steel with self
adjustable and comes opening spring handles. Great for punching
in an individual box. accordion and sax straps.
Tan only.
F24 Six Size Hole Puncher
O36 Saxophone strap
185
GENERAL & SM. GOODS

General items & small goods

O30 CELLO SET

These cello sets

fold up, and are
very compact.
The chrome
plated holder has
two legs which
fasten around the
cellist’s chair
legs. A third leg
has a series of holes in which the cello end pin can
be placed for solid positioning of the instrument
during playing.
O30 CELLO SET BEING USED
O30 Cello Set

S39 DRUM HEAD TUCKER HEAVY DUTY TOOL HANGERS

Tucker has a Heavy duty hangers

wood handle are made from
and brass 5/16” (7.9mm) wide by
tongue. 3/32” (2.4mm) thick,
zinc plated steel. All
hangers have
pre-punched holes for
S39 Drum Head Tucker securing to the wall or
a bench. Two different
shapes to choose from.
MAGNIFIERS
L STYLE HANGER
These are the popular
Telesight magnifiers,
P40 2” (50.8mm)
with high quality,
prismatic lenses
P41 3” (76.2mm)
m o u n t e d i n
lightweight plastic J STYLE HANGER
frames. There are two
styles. Both can be P42 1/2” (12.7mm)
flipped up out of the way when magnification is not
required. 2 power with a 10” thru 11” (254mm thru
279mm) focus range for easy use while working.
Over 60 years of satisfying
J1 Clip on style for use with regular customers like you!
glasses
J2 Half frame for those who do not
normally wear glasses World’s Largest Manufacturer of
Quality Band Instrument
CALL TODAY TO PLACE YOUR ORDER
800-253-2261
Repair Tools.
186
 GENERAL & SM. GOODS
General items & small goods

CASE LATCHES
T9 Flush Latch Set Same as T17(below),
1-1/4” X 2-1/4” but smaller.
T2 Flute case latch, Brass only
Sold brass only. T9A Hasp only
1-5/8” X 5/8” Brass only
Sold in Pairs
(L & R)

T14 Flute case latch,

in nickel,
T5 Latch with lock 1-1/2” X 1-1/4”
1-3/4” X 1-1/4” (H) (W)
Brass or Nickel

T17 Large Flush

Latch set,
Brass only
1-5/8” X 2-5/8”
Includes: latch,
T6 Flush Latch body, hasp &
without lock Key
2-3/4” X 1-1/2” T17C Hasp only
Nickel only

T18 Latch with

Lock
Nickel only
T7 Latch without 1-3/4” X 1-1/4”
lock
1-3/4” X 1-1/4”
Brass or Nickel

MOLDED CASE LATCHES

These two case latches
have a hidden talent. All
the rivets and the top are
completely covered
T8 Drawbolt latch when installed. With one
No lock finger the lever is raised
2-3/4” X 1-1/2” to a vertical position. Let go and
Brass or Nickel it pops open.
T12 Small molded case latch
2-1/8” X 5/8” Nickel Only

www.ferreestools.com T13 Large molded case latch

1” X 2-1/4” Nickel Only
187
GENERAL & SM. GOODS

General items & small goods

STOP HINGES SPLIT RIVETS

Specify brass or nickel or finish
(Sold in 100’s only)

T10B Stop Hinge T11B Stop Hinge

1-1/4” X 1-5/8” 1” X 2”
Brass Plated Brass Plated T23 7/32” (5.6mm) diameter head,
1/8” (3.2mm) diameter body. Lengths
T10N Stop Hinge T11N Stop Hinge available are 6/16”, 8/16”, 10/16” and
1-1/4” X 1-5/8” 1” X 2” 12/16”
Nickel Plated Nickel Plated
T24 5/16’ (7.9mm) diameter head,
5/32” (3.96mm) diameter body. Lengths
HANDLE LOOPS available are 6/16”, 8/16”, 10/16”, and
12/16”
T15B Handle loop
1-3/8” X 5/8” T25 3 / 8 ” ( 9 . 5mm) d i a me t e r h e a d ,
Brass Plated 5/32” (3.96mm) diameter body. Lengths
available are 8/16”, 10/16”, and 12/16”
T15N Handle loop
1-3/8” X 5/8” T26 100 assorted T23, T24 and T25 rivets.
Nickel Plated Brass and nickel finish.

WASHERS FOR T24 AND T25

T20 CASE STUDS RIVETS
Specify brass or nickel finish
T20 Black Plastic (Sold in 100’s only)
Bottom Stud
5/8” X 1/2”
T27 1/2” (12.7mm) O.D. washers
Sold by the dozen
T28 5/8” (15.9mm) O.D. washers

T21 CORNER BRACE T29 100 assorted T27 and T28 washers, brass
and nickel.
T21 Case reinforcement angle corner brace.
Available in nickel
Notes from customers:
“This is my second reading of this, and I
find it most intriguing. I intend to follow this
program using your suggested format.
Thanks again, Gary. My first experience with
you was in 1967-40 years ago-and I am still
learning from you.”...Patrick, OH

188
 GENERAL & SM. GOODS
General items & small goods

T50 Post handle. 5-1/4” (133mm) long. Avail T56 Leather handle with rings and white
able in black, brown and tan. SPECIFY stitching. 6” (152mm) long. Black only.
COLOR.
POWER TONE FLUTE PLUGS

Replace standard flute head cork with the new

Power Tone Plug made of super strong delrin plastic
with a rubber “ O” ring which seals the air 100%. No
loss of power and stability in pitch and tone. The
rubber “O” ring only contacts the metal in the head to
produce a more resonant sound. Available in 3
T53 Flat black handle. 5-1/2” (140mm) long.
threads sizes.

PT-5 Flute Plug (8/32 thread size)

(King, Artley, Blessing, Conn, Emerson,
Deford, Haynes, Gemeinhardt, Armstrong)

PT-6 Flute Plug (6/32 thread size)

(Bundy, Buescher, Old Artley)

PT-7 Flute Plug ( 4 x .7mm thread size)

(Jupiter, Yamaha)

NONE FOR ALTO FLUTES

T54 5-1/2” (140mm) black handle.

T55 Long, flat, black, 8-3/4” (222mm) handle FOR FASTER

with spring steel support for amps
SERVICE USE YOUR
CUSTOMER NUMBER
Consistently the lowest prices in
the industry. Ph:800-253-2261 or Fax:269-965-7719
189
GENERAL & SM. GOODS

General items & small goods

CASE HANDLES

T37 Heavy duty vinyl case handle.

T30 Leather post handle. 5-1/4” (133mm) 5-3/4” (146mm) long. Black only.
long. Specify black or brown.

T38 Super heavy duty vinyl case handle.

T33 End Buckle leather emergency handle.
8-1/2” (216mm) long. Black only.
Handle length without buckles is
5” (127mm). Specify black or brown.

T39 Heavy, black leather handle, with steel

T34 Side buckle leather emergency handle. reinforcement in handle
5” (127mm) long. Specify black or
brown.
PLACE AN ORDER
24 HRS A DAY!!!
World’s Largest Manufacturer
TOLL FREE:800-253-2261
of Quality Band Instrument
FAX:269-965-7719
Repair Tools. ferreestools@aol.com
190
 GENERAL & SM. GOODS
General items & small goods
ROCHE’-THOMAS ALISYN
FAMILY OF FINE LUBRICANTS OIL AND GREASES

VALVE OIL
T60 Roche’-Thomas Valve Oil 2 oz (59ml)
T61 Roche’-Thomas Valve Oil 8 oz (237ml)
BORE OIL/WOOD CONDITIONER
T81 Alisyn Bore Oil & Wood Conditioner
6 oz(17.7ml)
SPRAY BOTTLE
T66 Roche’-Thomas “Bone Bottle” Sprayer CORK & TUNING SLIDE GREASE
T82 Aliysn Cork & Tuning Slide Grease
BORE OIL .35 oz(10gm)
T67 Roche’-Thomas Bore Oil 2 oz (59ml)
SOLVENT/CLEANER
TROMBONE SLIDE OIL T83 Alisyn Solvent/Cleaner 4 oz(118ml)
T62 Roche’-Thomas Slide Oil 2 oz (59ml)
T63 Roche’-Thomas Slide Oil 8 oz (237ml) VALVE-SLIDE-KEY OIL
T69 Alisyn Valve-Slide-Key Oil .6 oz(17.7ml)
TROMBONE SLIDE CREAM
T64 Roche’-Thomas Trombone Slide HEAVY DUTY KEY OIL
Cream T84 Alisyn Heavy Duty Key Oil .6 oz(17.7ml)

TUNING SLIDE GREASE FERREE’S HEAVY DUTY

T65 Roche’-Thomas Tuning Slide Grease SHOP APRON
1/2 oz (14.2gm)
This smart apron has an adjustable buckle strap,
tie in back waist straps and NO DANGEROUS
KEY OIL POCKET to get caught and or/entwined and
T68 Roche’-Thomas Key Oil 2 oz(59ml) wrapped up by a motor or buffer.
These high quality aprons are Repairman Blue
T80 LEATHER PAD PRESERVATIVE and are embroidered with Ferree’s NEW logo.

Call today to order a Shop Apron!!

Sugar water and saliva are a leather pad’s worst
enemies. Our silicone treatment helps prevent
moisture absorption and extends the life of the pad.
Sell the treatment as an extra when doing re-pad jobs See us online at
or offer it as a free service for customer good will.
The bottle has a built-in applicator (for leather only). www.ferreestools.com
T80 Leather Pad Preservative
191
GENERAL & SM. GOODS

General items & small goods

MOUTHPIECE CAPS LIGATURES

Comes in either nickel

finish or gold lacquered.

Clarinet
S50 Eb Clarinet, nickel finish
S51 Bb Clarinet, nickel finish
S60 Eb Clarinet, nickel S58 Alto Clarinet, nickel finish
S61 Bb Clarinet, nickel S59 Bass Clarinet, nickel finish
S68 Alto Clarinet, nickel
S69 Bass Clarinet, nickel Soprano Saxophone
S52N Nickel finish
S52G Gold lacquered
Soprano Saxophone
S62N Nickel S62G Gold lacquer
Alto Saxophone
S53N Nickel finish
Alto Saxophone S53G Gold lacquered
S63N Nickel S63G Gold lacquer
C Melody Saxophone
C Melody Saxophone S54N Nickel finish
S64N Nickel S64G Gold lacquer
S54G Gold lacquered
Tenor Saxophone Tenor Saxophone
S65N Nickel S65G Gold lacquer
S55N Nickel finish
S55G Gold lacquered
Baritone Saxophone
S66N Nickel S66G Gold lacquer Baritone Saxophone
S56N Nickel finish
SAXOPHONE NECK PLUGS Bass Saxophone
(END PLUGS) S57N Nickel finish
S57G Gold lacquer

Tenor Sax
S18P Plastic

Alto Sax
S19G Gold Lacquered
S19P Plastic
S19S Silver Finish

192
 REPAIR KITS

REPAIR KITS
EMERGENCY REPAIR KITS Q30 STANDARD REPAIR KIT
Take a look at these handy kits. There is a
size for every need and they’re easy to sell to:
*Band Directors
*Salesmen
*“On the road” musicians

For band directors or salesmen who don’t want to

get into emergency repairs deeply enough to buy
the Q29, this Q30 Standard Kit will solve many
problems.
CONTENTS
Cork Cement, Round Nose Pliers, Spring Hook,
Swivel Top Screwdriver, Feelers, Cork Knife, Valve
Oil, Slide Oil, Bore Oil, Cork Grease, Clarinet Pads, Sax
Q29 DELUXE REPAIR KIT Pads, Flute Pads, Water Key Springs, French Horn
Cord, Flat Spring Screws, Alcohol Lamp, Flat Nose
This kit contains most items necessary for on the Pliers, Brasso, Pad Leveling Tool, Special Pad Prick,
spot repairs to “keep ‘em playing.” The items come Rawhide Mallet, Pivot Screw Key Reamer, Shellac, 4
in a sturdy box. Take a look at what’s included. Thicknesses of Sheet Cork, Water Key Corks, Tapered
Neck Corks, Valve Stem Felts, Valve Stem Corks, Felt
TOOLS Bumpers, Sax Key Felts, Stainless Steel Round Springs,
Ferree’s Mouthpiece Puller, Jeweler’s Anvil, Flat Springs, Valve Springs, Pivot Screws, Thumb Rest
2-Swivel Top Screwdrivers, Valve Mirror, 2-Pad Screws, Valve Cleaning Rod, Valve Mirror, Emery
Leveling Tools, Tweezers, Spring Hook, Hammer, Strip, Lyre Screws, Ligature Screws, Baritone Bell
Rawhide Mallet, Bench Knife, Swedging Pliers, Chain Screws, Sousaphone Bell Screws.
Nose Pliers, Round Nose Pliers, Flat Nose Pliers, Heat
Treated Diagonal Cutters, Spring Punching Pliers, Alco- Q30 Standard Repair Kit
hol Lamp, Lead Block, Warding File, Parallel Round
File, Testing Feeler Holder, Clamp on Vise, Pivot Screw Q31 ECONOMY REPAIR KIT
Key Reamer, Solder Scraper, Flute Gauge, 6” Rule, The Q31 Economy
Micro Torch.
Repair Kit is for
SUPPLIES minimum repair
2-Mouthpiece Brushes, Flexible Trombone Brush,
emergencies. Take it
Valve Brush, Wet & Dry Sand Paper, Clarinet Pads,
Sax Pads, Piccolo Pads, Flute Pads, 4 Thicknesses with the band to the
Sheet Cork, Tube Corks, Water Key Corks, Valve Stem football game o r
Felts, Sax Key Felts, Sax Bumper Felts, Pad and Cork parade. Also useful to
Cement, Flat Springs, Flat Spring Screws, Stainless the college music major. A lot of repair potential at
Steel Round Springs, Water Key Springs, Valve a minimum price.
Springs, Valve Oil, Key Oil, Bore Oil, Wood Screws, CONTENTS
Valve Cleaning Rod, Cork Cement, Soft Solder, Solder Cork Cement, Swivel Top Screwdriver, Cork Knife,
Flux, French Horn Cord, Split Rivets, Clarinet Swab, Clarinet Pads, Sax Pads, Valve Springs, Special Pad
Cork Grease, Sax Pivot Screws, Clarinet Pivot Screws, Prick, Tapered Sax Neck Corks, Sax Felts, Sax
Lyre Screws, Ligature Screws, Baritone Bell Screws, Bumpers, Water Key Corks, Valve Cleaning Rod,
Sousaphone Bell Screws, Brasso, Silvo, Cheesecloth, French Horn Cord, Chain Nose Pliers, Spring Hook,
Bench Oiler, Testing Corks, Shellac, Wood Wedges, Key Oil, Flute Pads, Water Key Springs, Pad Leveling
Binding Wire, Soldering Millboard, Valve Stem Corks, Tool, Sheet Cork, Valve Stem Corks, Stainless Steel
Emery Strip, Slide Oil. Round Springs, Flat Spring Screws, Pivot Screws,
Thumb Rest Screws, Pad Cement, Cork Grease
Q29 Deluxe Repair Kit Q31 Economy Repair Kit
193
 INDEX BY NAME
INDEX BY NAME

~A~ ~B cont.~
ABRASIVE CORD AND TAPE……………………..176 BASSOON TENON TOOLS.........................................97
ABS GRAFT FOR G78………………………………..99 BEESWAX...................................................................137
ABS PLASTIC GLUE, WELD-ON............................110 BELL IRON, FRENCH HORN/TROMBONE………31
ABS PLASTIC ROD, BLACK………………………110 BELL IRON, TRUMPET/CORNET…………………31
ACCORDION TOOLS……………………………….137 BELL IRON UNIVERSAL…………………………....31
ADAPTOR CHUCK…………………………………...64 BELL JACK, SOUSAPHONE......................................27
ADJUSTMENT SCREW DRILLING JIG…………..83 BELL MANDRELS........................................................31
ADJUSTABLE FRENCH HORN HOLDING JIG.....53 BELL MOUNTING JIG…………………………..…167
ADJUSTABLE HACKSAW FRAME……………....108 BELL NUTS & SCREWS............................................133
ADJUSTABLE JEWELERS SAW FRAME……….181 BELL TENON REAMER……………………………..97
ADJ. OBOE OCTAVE INSERT REMOVER.............71 BELL TENON SET…………………………………....98
ADJUSTABLE REAMERS…………………………...36 BELT/DISK SANDER.................................................144
ADJUSTABLE SOCKET REAMER……………….100 BELT SANDER BELTS……………………………..144
AIR BUFFER...............................................................150 BELL STEM MANDREL..........................................32
AIR VALVE, 1/2”.........................................................159 BENCH ANVIL............................................................109
ALCOHOL LAMP.........................................................95 BENCH DUSTER BRUSH..........................................168
ALTO CLARINET SWAB .........................................170 BENCH HAMMER......................................................130
ALTO/BASS CLARINET PADS................113, 115, 120 BENCH KNIFE………………………………………..86
ALTO FLUTE BODY MANDREL…….........………..92 BENCH LATHE, WOODWIND……………………..91
ALTO FLUTE HEAD MANDREL………………....92 BENCH MOTOR ADAPATOR...................................63
ALTO SAX NECK HOLDERS………………….......67 BENCH MOTOR SPINDLE………………………….63
ALUMINUM BUSHING, RIGHT HAND….........….148 BENCH MOTOR, COMPACT……………………….63
ALUMINUM BUSHING, LEFT HAND…........……148 BENCH MOTORS…………………………………….63
ALUMINUM HAND BRAKE.......................................63 BENCH OILER..............................................................82
ALUMINUM HAND VISE..........................................173 BENCH PEGS………………………………………....86
ANVIL, BENCH...........................................................109 BENCH VISE…………………………………………173
ANTI-FLUX, TIX.........................................................166 BENDING LEVERS, SAX KEYS.................................72
APRON..........................................................................191 BERYLLIUM COPPER SPRINGS…………………132
ARBORS, MOUTHPIECE............................................18 BINDING WIRE……………………………….……..167
ARBORS, UTILITY MOTOR SHAFT................91, 146 BLACK ABS PLASTIC ROD……………………….110
ASSEMBLY GLOVES………………………….......148 BLACK PIGMENT…………………………………....75
ASSEMBLY BOARDS…………………………........106 BLADES FOR BELL TENON REAMER…………...97
ASSEMBLY MANDRELS, WOODEN...................53,56 BLADE MAGNETIZER……………………………....66
AUTO LOCKING LUG FOR G88………........……..25 BLADES, HACKSAW……………………….………108
AUTOMATIC CENTER PUNCH…………........……93 BLADE, SCREW HOLDING SCRWDRIVER……...66
~B~ BLADES, SINGLE EDGE RAZOR.............................86
BAG, DUST COLLECTOR.........................................150 BLADES, SWIVELTOP SCREWDRIVER………….66
BALLS, DENT..............................................13, 14, 15, 22 BLAZER TORCH……………………………………..95
BALLS, TUBING CLEANER.....................................157 BLOW PIPES..................................................................94
BARREL LINERS, POLYETHYLENE....................157 BLOWER WITH MOTOR…………………………..150
BARITONE TUNING SLIDE PLIERS……………...11 BLUED NEEDLE SPRINGS………………………...131
BASE, DENT MACHINE................................................9 BLUED STEEL SPRINGS…………………………..132
BASS CLARINET ARBOR KIT..................................99 BORE MEASURING TOOL………………………..110
BASS CLARINET PADS.............................113, 115, 120 BORE OIL.....................................................................191
BASS CLARINET SWAB…………………………...170 BORE TOOL, INSIDE...................................................78
BASS CLAR. TONE HOLE UNDERCUTTERS……79 BOTTOM CASE STUD……………………………...188
BASS TROMBONE ASSEMBLY MANDREL...........53 BRACKETS FOR BUFFERS………………………..150
BASKET, WORK.........................................................154 BRASS ANVIL………………………………………..111
BASSOON BELL RINGS……………………………79 BRASS HEAD HAMMER…………………………….44
BASSOON BOCAL CABLE………………………...104 BRASS JAW PLIERS....................................................90
BASSOON BOCAL CLEANER…………………….170 BRASSO & RED BEAR…...……………………........156
BASSOON BODY LOCK……………………………168 BROACHES, PENTAGON…………………………...78
BASSOON CRUTCH ASSEMBLY…………………168 BUFFER, FLOOR & WALL MOUNT…………......145
BASSOON PADS..........................................................115 BUFFING GLOVES, REVERSIBLE……………….148
BASSOON SWABS......................................................170 BUFFING HOOD…………………………………….150
194
 Index by name

INDEX BY NAME
~B cont.~ ~C cont.~
BUFF RAKE.................................................................148 CLARINET TONE HOLE UNDERCUTTERS..........79
BUFFS………………………………………147, 148, 150 CLEANING RODS.......................................................168
BUMPERS, FELT........................................................142 CLEAR MAGIC.............................................................75
BUMPERS, NEOPRENE…………………………….140 CLIP-ON MAGNIFIERS.............................................186
BUMPER REMOVER, BASS AND TENOR………..18 CLIPS, FLUTE...............................................................85
BUMPER RUBBERS FOR TUBA…………………..140 CLIPS, SOLDER..........................................................167
BUNSEN BURNER..................................................94, 95 COLD CLEANER........................................................160
BURNISHING RINGS………………………..........35,49 COMBINATION FILE CLEANER............................181
BURNISHERS, CURVED.............................................30 COMBO. SCRWDRVR/FL CLEANING ROD...........62
BURNISHERS, DOUBLE END....................................30 COMBO. SPRINGHOOK/SCREWDRIVER..............66
BURNISHERS, HOOK..................................................30 COMPOUND LEVERAGE PLIERS............................64
BURNISHERS, STRAIGHT………………………….30 COMPOUND LEVERAGE TIN SNIPS.....................108
BUTANE REFILL……………………………………..95 CONCENTRATED STERISOL.................................171
~C~ CONE SHAPED ROLLERS..........................................23
CABINETS....................................................................169 CONTOURED BELL ROLLERS............................23,31
CABLE SET, ROD TAYLOR.......................................17 CORD, FRENCH HORN...............................................28
CABLE SYSTEM, PRITCHARD (TUBA)..................15 CORK GREASE...........................................................139
CALIPER, MM & .001 INCHES..................................50 CORK KNIFE..........................................................86
CALIPERS, DIAL..........................................51, 64, 175 CORK PAD CUTTERS.................................................93
CALIPERS, INSIDE....................................................175 CORK PADS.................................................................141
CALIPERS, OUTSIDE................................................175 CORK PROTECTOR..................................................142
CANVAS MALLET/HAMMER...................................44 CORK SANDING ACCESSORY.................................74
CAPS, MOUTHPIECE................................................192 CORK STRIP CUTTING GAUGE............................142
CAPS, TENON................................................................78 CORK STRIPPER........................................................142
CASE HANDLE LOOPS.............................................188 CORK WASHERS…………………………………...139
CASE HANDLES.................................................189, 190 CORK, SHEET.............................................................141
CASE LATCHES..........................................................187 CORKS, E FLAT FLUTE............................................139
CASE REINFORCEMENT ANGLE BRACE...........188 CORKS, FRENCH HORN…………………………..139
CASE STUDS................................................................188 CORKS, KEY……………………………………....…139
CASING MANDRELS...................................................45 CORKS, MUTE............................................141
CELLO SET..................................................................186 CORKS, TRILL KEY..................................................139
CEMENT, FRENCH......................................................87 CORKS, TUBE & HEAD CORKS.............................140
CEMENT, PAD/CORK..................................................87 CORKS, WATERKEY……………………………....139
CENTER PUNCH...........................................................93 CORNET TUNING SLIDE PLIERS............................11
CHAIN NOSE PLIERS................................................109 CORNET & TRUMPET ASSEMBLY MANDREL...53
CHAIN NOSE SWEDISH PLIERS......................38, 105 CORNET & TRUMPET POLISHING JIG.................53
CHAMOIS CLARINET SWAB..................................170 CORNET/TRPT TUN. SL. DENT BL. HAMMER.....20
CHEESECLOTH..........................................................156 CORNET/TRUMPET BELL MANDREL...................31
CHESTS, TOOL...........................................................172 CORROSION CRACKER OIL..............................11, 94
CHIPS, GRENADILLA.................................................75 COUNTERSINKS..........................................................78
CHUCKS, JACOBS........................................................63 COUPLING FOR DUSTING GUN............................160
CLARINET BARREL CENTERING TOOL..............62 CRACK PINNING WIRE.............................................69
CLARINET BARREL REAMER...............................110 CRACK SLICK SPATULA...........................................88
CLARINET BODY CENTERING CLAMP................94 CROWNS, FLUTE.....................................134, 135, 136
CLARINET BORE CLEANING BRUSH..................170 CRYSTOLON OILSTONE.........................................176
CLARINET KEY BUFFING COMPOUND..............149 CURVED BURNISHERS..............................................30
CLARINET MOUTHPIECE MANDREL...................70 CURVED NOSE PLIERS............................................107
CLARINET PAD LEVELING TOOL/SLICK.....71,113 CURVED SOLDER SCRAPERS................................163
CLARINET PADS.....................................................114 CUTTING PAD...............................................................93
CLARINET SOCKET GRAFTING KIT.....................99 CYLINDRICAL SCRATCH BRUSH........................151
CLARINET STRAP.....................................................185 ~D~
CLARINET SWAB.......................................................170 DEEP COMPACT CABINET.....................................169
CLARINET TENON CAPS...........................................78 DELRIN, BLACK.........................................................110
CLARINET THUMB RESTS.....................................171 DELUXE DOUBLE END SPRING HOOK.................70
CLARINET TONE HOLE CUTTERS......................101 DELUXE REPAIR KIT.........................................59, 193
195
 Index by name
INDEX BY NAME

~D cont.~ ~E cont.~
DELUXE REVERSIBLE SCRAPER.........................167 EMERY CAKE.............................................................149
DENT BALL HOLDER.................................................14 EMERY, ROLL/STRIP...............................................176
DENT BALL DRIVER/RETRIEVER SETS.........19-21 END CUT NIPPERS....................................................108
DENT BALL DRIVERS................................................13 ERICK BRAND REPAIR MANUAL...........................57
DENT BALL HAMMERS.............................................20 EXHAUST FAN............................................................159
DENT BALLS..............................................13, 14, 15, 22 EXPANDABLE TROMBONE SLIDE DENT
DENT BALLS, TUBA....................................................16 REMOVERS...................................................................50
DENT BALLS, UNDRILLED.......................................35 EXPANDER, ROTOR BEARING PLATE..................58
DENT CABLE, BASSOON BOCAL..........................104 EXPANDERS, RIGHT ANGLE...................................26
DENT HAMMERS.........................................................12 EXPANDER, TENON..............................................80, 81
DENT MACHINE & ACCESSORIES.......1-10 EXPANDERS, WOODWIND JOINT....................80, 81
DENT REMOVAL/CABLE SYSTEM, TUBA............17 EXPANDABLE TROMBONE DENT REMOVER,
DENT REMOVER, CORK BARREL..........................34 INNER/OUTER............................................................50
DENT REMOVING RINGS..........................................34 EXTERNAL FERRULE BRUSHES..........................164
DENT ROD HOLDING VISE.......................................25 EXTRACTORS, SCREW......................................67, 174
DENT ROD THREADED ADAPTORS.......................15 EXTRUDER, TRIPLE KEY.........................................80
DENT RODS.......................................................27, 28, 56 ~F~
DENT RODS, FRENCH HORN...................................28 FABRICUT, ROLL/STRIP.........................................176
DENT ROLLER BALLS...............................................22 FAN, EXHAUST...........................................................159
DENT ROLLERS.....................................................23, 51
FEELER/HOLDER........................................................67
DIAL CALIPERS.............................................51, 64, 175 FELT SQUARE............................................................143
DIAGONAL CUTTERS...............................................108 FELT BUMPERS.........................................................142
DIE STOCKS................................................................179
FELT SHEETS, SYNTHETIC....................................143
DISK/BELT SANDER.................................................144 FELTS, SAX KEY/TOP CAP......................................143
DOMESTIC DIES........................................................179
FELTS, VALVE WASHERS.......................................143
DOMESTIC TAPS.......................................................179
FERREES REPAIR MANUAL.....................................57
DOMESTIC TAPS & DIES IN A BOX......................179 FERRULE BRUSH, INTERNAL...............................164
DOUBLE BUFF RAKE W/HOLDER........................148 FILE/CLEANER COMBINATION...........................181
DOUBLE HANDLE ROLLERS...................................23 FILE, HANDLES..........................................................181
DIE, SWEDGING.....................................................81, 90
FILES..............................................................76,181
DIES, FLUSHBANDING.............................................106 FILES, SWISS PATTERN & TONE HOLE FILES...76
DIES, METRIC.............................................................179
FILES, TONE HOLE PAD SEAT..............................100
DIES, HEAD SWEDGING (FL/PICC)........................81 FILING BLOCK...........................................................181
DIES, THREADING....................................................179FILING CLAMP, KEY................................................104
DISINFECTANTS........................................................171
FINGER BUTTONS, PEARL.....................................172
DISKS/SANDPAPER...................................................144 FINGER RINGS, SOLDER ON TYPE......................172
DIVIDERS.....................................................................175
FISH SKIN....................................................................102
DOUBLE END BURNISHERS.....................................30 FLANGE NUTS............................................................146
DRAWRINGS...........................................................35, 37
FLUTE PAD WASHERS, METAL ...112, 134, 135, 136
DREMEL ......................................................................177
FLAKE GLUE................................................................87
DRILL BIT GAUGE......................................................89
FLAKE SHELLAC.........................................................88
DRILL BITS....................................................................89
FLAT NOSE PLIERS..........................................107, 109
DRILL, HAND..............................................................107
FLAT SPRING HOLE PUNCH....................................71
DRILL ROD....................................................................74
FLAT SPRINGS, CLARINET & SAX.......................132
DRILLING JIGS............................................................82
FLANNEL.....................................................................156
DRIVER/RETRIEVER, DENT BALL...................19-21 FLEXIBLE COMBINATION RULER......................174
DRIVERS FOR BARREL TYPE DENT BALLS.......13 FLEXIBLE VINYL TUBING...............................73, 177
DRUM HEAD TUCKER.............................................186 FLEXIBLE WIRE CLEANING BRUSHES..............170
DUCKBILL PLIERS......................................38, 105, 109 FLINTS..........................................................................163
DUCKBILL PLIERS, THIN TIP................................109 FLOOR PEGS, BASS CLARINET.............................185
DUSTING GUN............................................................160
FLOURESCENT BULBS FOR LEAK LIGHTS........84
DYE, CONCENTRATE...............................................158 FLOURESCENT LEAK LIGHTS................................84
~E~ FLUSH BAND DIES....................................................106
ELDRED “WIDGET”....................................................90 FLUSH BANDING DIE SHIM STOCK....................106
ELECTRIC GLUE POT................................................87 FLUSH BANDS.............................................................106
196
 Index by name

INDEX BY NAME
~F cont.~ ~G~
FLUSH LATCH SET...................................................187 GAUGE, DRILL BIT.....................................................89
FLUTE/PICCOLO SPRING WIRE...........................132 GAUGE, FLUTE PAD HEIGHT..........................62, 112
FLUTE BODY MANDREL...........................................92 GAUGE, SAX PAD CUP HEIGHT .............................67
FLUTE BOOSTER PLIERS.........................................70 GAUGES, CORK STRIP.............................................142
FLUTE BOOSTERS, NYLON....................................136 GAUGES, TELESCOPING.........................................174
FLUTE CASE LATCH................................................187 GAUGES, THREAD....................................................179
FLUTE CLEANING ROD/SCREWDRIVER.............62 GERMICIDE, STERISOL..........................................171
FLUTE CLIPS................................................................85 GLASSES, MAGNIFYING.........................................186
FLUTE CROWNS........................................134, 135, 136 GLOVES, ASSEMBLY, BUFFING............................148
FLUTE GAUGE.....................................................62, 112 GLUE BRUSH..............................................................168
FLUTE GROMMET BOOSTER REMOVER GLUE GUN KIT.............................................................88
PLIER..............................................................................70 GLUE PLUGS, TAPERED..........................................105
FLUTE GROMMETS..........................................134, 135 GLUE POT, ELECTRIC...............................................87
FLUTE HEAD MANDREL.......................................6, 92 GLUE STICKS, CLEAR/WHITE................................88
FLUTE HEAD SWEDGING DIES...............................81 GLUE, GRANULAR.....................................................87
FLUTE JOINT TENON EXPANDER.........................81 GLUE, HOT STUFF.......................................................75
FLUTE KEY ARM BENDING SET.............................72 GLUE, JET MAGIC.......................................................75
FLUTE KEY PIN REMOVAL TOOL.......................111 GOLD TRADEMARK CRAYON..............................102
FLUTE KEY LEVELING TOOL.................................68 GOLDBEATERS SKIN (FISH SKIN).......................102
FLUTE MANDRELS.....................................................92 GOOSENECK DENT ROD FOR SAXES...................56
FLUTE PAD CUP TOOL............................................105 GOOSENECK EXPANDERS, SAX.............................81
FLUTE PAD HEIGHT GAUGE...........................62, 112 GRAFTS, SOCKET........................................................99
FLUTE PAD IRONING TOOL...............................68,71 GREASE, CORK..........................................................139
FLUTE PAD CUP LEVELING TOOLS......................71 GREASE, TUNING SLIDE.........................................191
FLUTE PAD HOLE PUNCH SET................................93 GRENADILLA CHIPS..................................................75
FLUTE PAD SEATING CLIPS....................................85 GRILL FOR SOUSAPHONE BELL..........................171
FLUTE PAD SPRING WIRE......................................132 GRINDING WHEEL, SILICON CARBIDE...............64
FLUTE PAD WASHERS, METAL............134, 135, 136 GRIT BANDSANDER BELTS...................................144
FLUTE PAD WASHERS, PAPER..............................112 GROMMET/BOOSTER REMOVAL PLIERS...........70
FLUTE PADS................................................................115 GROMMETS, FLUTE.........................................134, 135
FLUTE PLUGS, TONE HOLE...................................189 GROUND CASING MANDRELS................................45
FLUTE ROLLER, PRECISION...................................92 GUIDE, VALVE FITTING TOOL...............................38
FLUTE SWAB..............................................................170 GUIDES, VALVE (BRASS)...........................................38
FLUTE TENON SLEEVE...........................................100 GUITAR FRET WIRE.................................................169
FLUTE TONE HOLE LEVELING TOOL.................77 GUN, DUST...................................................................160
FLUTE TRAY...............................................................154 GUN, GLUE KIT............................................................88
FLUX......................................................................164 GUN, HEAT....................................................................86
FLUX, SILVER SOLDER...........................................164 GUN, SPRAY, ACCESSORIES..................................160
FLUX, SOFT SOLDER................................................166 ~H~
FOOT SWITCH..............................................................63 HACKSAW FRAME, BLADES..................................108
FORMING MANDREL MOUTHPIPE RECEIVER.36 HAMMER, BENCH.....................................................130
FRACTION RULER....................................................174 HAMMER, BRASS HEAD............................................44
FRENCH CEMENT.......................................................87 HAMMERS, DENT........................................................12
FRENCH HORN BALL.................................................22 HAND BRAKE FOR BENCH MOTOR......................63
FRENCH HORN CORD................................................28 HAND DRILL...............................................................107
FRENCH HORN BELL DRIVER................................19 HAND TUBING SHRINKER........................................28
FRENCH HORN/TROMBONE BELL IRON.............31 HAND VISE, ALUMINUM.........................................173
FRENCH HORN DENT RODS....................................28 HANDLE LOOPS, CASE............................................188
FRENCH HORN POLISHING JIG.............................26 HANDLE, BURNISHING RING..................................35
FRENCH HORN HOOK-BACK DRIVER/ HANDLE, WOOD BURNISHER.................................30
RETRIEVER...................................................................19 HANDLES, CASE................................................189, 190
FRENCH HORN MOUTHPIPE RECEIVER FORM- HANDLES, FILE..........................................................181
ING MANDREL.............................................................36 HANGERS, HEAVY DUTY TOOL...........................186
FRENCH PLUGS, FLUTE..........................................136 HEAD MANDREL, FLUTE......................................6, 92
FRET WIRE, GUITAR................................................169 HEAD TUCKER FOR DRUMS..................................186
197
 Index by name
INDEX BY NAME

~H~ ~K cont.~
HEAT BLOWGUN.........................................................86 KITS, REPAIR........................................................59, 193
HEAT SHRINK TUBING, BLACK.............................73 KITS, SCREW..............................................................133
HEAT STAKING TOOL.............................................129 KNIVES..........................................................................86
HEAVY DUTY POST PUSHER/ DENT PULLER....23 KNUCKLE DENT TOOLS...........................................29
HEIGHT GAUGES..........................................62, 67, 112 ~L~
HINGE TUBE SHORTENERS.....................................76 LACQUER MANDRELS.............................................154
HINGE TUBING FILES..............................................181 LACQUER REMOVER/STRIPPER..................157, 160
HINGES, STOP............................................................188 LACQUER, AEROSOL SPRAY.................................159
HOLDER, CORNET/TRUMPET.................................53 LACQUER/THINNER, CATALYST, DYE..............158
HOLDER, DENT BALL................................................14 LAMP, ALCHOL, WICKS............................................95
HOLDER, FRENCH HORN.........................................26 LAMP, MAGNIFIER AND SHADE..........................169
HOLDER, SAX NECK...................................................67 LAPPING BLOCKS, VALVE.......................................12
HOLDING JIG, ADJ. FOR FRENCH HORN............53 LAPPING COMPOUND...............................................12
HOLDING JIG, VALVE INSTRUMENTS.................53 LAPPING MOTOR, VALVE........................................12
HOLE PUNCH, FLAT SPRINGS.................................71 LATCHES, CASE.........................................................187
HOLE PUNCH SET, FLUTE PADS............................93 LEAD BLOCK, PIG.......................................................52
HOLE PUNCH, SIX SIZES.........................................185 LEAD MELTING LADLE............................................17
HOOD, BUFFING........................................................150 LEAD JAWS.................................................................173
HOOK BURNISHERS...................................................30 LEAK LIGHTS, PARTS/BULBS...........................83, 84
HOOK NOSE KEY LEVER PLIERS..........................68 LEVELING BLOCK....................................................109
HOOK, SPRING.............................................................67 LEVELING STONE, TROMBONE STAND..............48
HOSE, AIR & CONNECTIONS.................................159 LEVELING TOOLS, WOODWIND KEYS..........68, 72
HOT STUFF GLUE/ACCESSORIES..........................75 LEVERS, SAX KEY BENDING...................................72
~I~ LIGATURE SCREWS.................................................133
INHIBITOR, RUST......................................................154 LIGATURES.................................................................192
IRONING TOOL FOR FLUTE PADS.........................71 LIGHTER, FILE, FLINTS..........................................163
IRONS, BELL.................................................................31 LIGHT FIXTURE........................................................159
~J~ LIME/SCALE REMOVER.........................................154
JACK FOR SOUSAPHONE BELL..............................27 LINERS, BARREL.......................................................157
JACOBS CHUCK...........................................................63 LIVE CENTER, WOODWIND.....................................91
JAWS, LEAD................................................................173 LOCK, BASSOON BODY...........................................168
JET MAGIC GLUE........................................................75 LOWER TENON PLUG HOLDER.............................97
JEWELERS SAW BLADES/FRAME........................181 LYRE SCREWS...........................................................133
JIG, ADJUSTMENT SCREW DRILLING.................83 LYRE SOCKET, SOLDER ON..................................172
JIG, BELL MOUNTING, CORNET/TRPT..............167 LYRES...........................................................................184
JIG, POST DRILLING..................................................82 ~M~
JIG, RAISED TONE HOLE........................................103 MAGNET, PENCIL STYLE.........................................13
JIG, SOLDER...............................................................163 MAGNETIC SCRIBER.................................................13
JIG, TUBING BENDING..............................................32 MAGNETIZER, SCREWDRIVER BLADE...............66
JIG, WATERKEY SPRING INSTALLATION..........54 MAGNIFIER, LAMP...................................................169
JOINT EXPANDERS, WOODWIND..........................81 MAGNIFYING GLASSES..........................................186
JOINT SEPARATORS, TROMBONE.........................18 MALLETS, CANVAS....................................................44
~K~ MALLETS, RAWHIDE.................................................37
KEY BENDING LEVERS FOR SAX...........................72 MANDRELS, BELL.......................................................31
KEY BRUSH.................................................................168 MANDRELS, CASING..................................................45
KEY BUFFING COMPOUND, CLARINET.............149 MANDRELS, CLARINET MPC & JOINT.................70
KEY FILING CLAMP.................................................104 MANDRELS, FLUTE....................................................92
KEY LEVELING TOOL, FLUTE................................68 MANDRELS, LACQUERING....................................154
KEY LEVELING TOOL, SAX.....................................72 MANDRELS, PICCOLO...............................................92
KEY LEVER PLIERS, HOOK NOSE.........................68 MANDRELS, SLEEVE..................................................45
KEY OIL.......................................................................191 MANDRELS, TAPERED..............................................33
KEY PIN REMOVAL TOOL.....................................111 MANDRELS, TROMBONE SLIDE.............................49
KEY REAMERS, PIVOT SCREW..............................78 MANDRELS, VALVE CASING & SLEEVE..............45
KEY SWEDGING TOOLS, WOODWIND ADJ........69 MANDRELS, VALVE THREAD.................................39
MANDRELS, WOOD........................................53,56,154
198
 Index by name

INDEX BY NAME
~M cont.~ ~O~
MEASURING TOOL, CLARINET BORE...............110 OIL, KEY......................................................................191
MEASURING TOOL, TUNING SLIDE......................32 OIL, PENATRATING..............................................11, 94
METAL BACK SAW...................................................108 OIL, SLIDE...................................................................191
METAL SNIPS.............................................................108 OIL, VALVE.................................................................191
MICROMETERS.........................................................175 OILER, BENCH.............................................................82
MILLBOARD...............................................................167 OILSTONES.................................................................176
MIRROR, VALVE.................................................38, 143 OVEN, WOODWIND PAD.........................................112
MONEL ADDITIVE...............................................44,183 ~P~
MORSE TAPER ARBOR FOR CHUCKS..................90 PAD CUP TOOL, FLUTE...........................................105
MOTO TOOL KIT, DREMEL...................................177 PAD, CUTTING..............................................................93
MOTORS, ACCESSORIES..............................63, 64, 91 PAD HEIGHT GAUGES.................................62, 67, 112
MOUNTING JIG, BELL.............................................167 PAD HOLE PUNCHES, FLUTE..................................93
MOUTHPIECE ADAPTORS......................................177 PAD IRONING TOOL, FLUTE.............................68, 71
MOUTHPIECE BRUSHES.........................................168 PAD LEVELING TOOLS (CLARINET/FL)......71, 113
MOUTHPIECE CAPS.................................................192 PAD OVEN....................................................................112
MOUTHPIECE DISINFECTANT.............................171 PAD PRESERVATIVE................................................191
MOUTHPIECE MANDREL, CLARINET..................70 PAD RESONATORS............................................128, 129
MOUTHPIECE POLISHING ARBORS.....................18 PAD RIVET PUNCH...................................................130
MOUTHPIECE PULLER.............................................25 PAD SEAT REAMERS................................................100
MOUTHPIECE RECEIVER REAMERS....................36 PAD SEATING CLIPS, FLUTE...................................85
MOUTHPIECE REFACING KIT.......................105,185 PAD SLICK, CLARINET......................................71, 113
MOUTHPIECE TUNING BITS(ADAPTORS).........177 PAD SLICKS, SAX.........................................................73
MTHPIECE SHANK STRAIGHTENING ARBOR...18 PAD TESTING FEELER/HOLDER............................67
MOUTHPIPE CABLE KIT........................................24 PAD WASHERS, FLUTE (METAL)..........134, 135, 136
MOUTHPIPE DENT ROD, TRPT...............................24 PAD WASHERS (PAPER)..........................................112
MOUTHPIPE DENT ROLLER KIT, TRPT...............24 PAD/CORK CEMENT...................................................87
MOUTHPIPE REC FORMING MANDRELS............36 PADS, BASSOON.........................................................115
MUSIC WIRE CUTTERS...........................................108 PADS, CLARINET, ALTO & BASS CLAR......114, 115
~N~ PADS, CORK................................................................141
NECK CLEANER, SAX..............................................170 PADS, COTTON CLEANING....................................155
NECK HOLDER, SAX...................................................67 PADS, FLUTE...............................................................115
NECK PLUGS, SAX.....................................................192 PADS, PICCOLO.........................................................115
NECK SCREW EXTRACTOR, SAX...........................67 PADS, SAX.............................................................120-127
NECK STRAPS.............................................................185 PAPER FLUTE WASHERS........................................112
NECK TENON EXPANDER, SAX/BASS CLAR.......80 PARALLEL ACTION PLIERS..................................107
NEEDLE SPRING PLIERS..........................................68 PATCH MAKING TOOL, MATERIAL......................52
NEEDLE SPRINGS......................................................131 PATCHING MATERIAL, BRASS...............................52
NEEDLES, PINNING..................................................111 PEARL BUTTONS, CORNET/TRPT........................172
NICKEL SILVER PATCHING MATERIAL.............52 PEARL HOLDERS & CLOSING DIES....................102
NORBECK CLARINET PADS...................................114 PEARL PROTECTOR.................................................102
NORTON SPRINGS & BUSHINGS..........................131 PEARLS, THUMB & FINGER...................................102
NUT DRIVERS.............................................................102 PEGS, BENCH................................................................86
NUTS, BELL.................................................................133 PENCIL MAGNET........................................................13
NUTS, FLANGE FOR BUFFING SHAFT................146 PENETRATING OIL...............................................11, 94
NUWHITE CAKE........................................................149 PERMA/LACQUER/REDUCER, DYE.....................161
~O~ PICCOLO HEAD SWEDGING DIE............................81
OBOE ARBOR/SOCKET GRAFTING JIG...............99 PICCOLO JOINT EXPANDER...................................81
OBOE CORK PAD HOLE CUTTER........................142 PICCOLO MANDRELS................................................92
OBOE OCTAVE TUBE REMOVERS.........................71 PICCOLO PADS..........................................................115
OBOE PADS.................................................................115 PICCOLO SPRING WIRE..........................................132
OBOE TENON TOOL...................................................97 PIN REMOVING TOOL, KEY..................................111
OBOE TENON HOLE CUTTER...............................101 PIN VISE.................................................................67, 137
OCTAVE KEY LEVER TUBING, SAX......................73 PIN/SPRING PARTS, BASSOON BODY LOCK.....168
OCTAVE/REGISTER TUBE REMOVERS...............71 PINNING NEEDLES...................................................111
OIL, BORE....................................................................191 PINNING WIRE, CRACK............................................69
199
 Index by name
INDEX BY NAME

~P cont.~ ~Q~
PIVOT SCREW COUNTERSINK, WOODWIND.....78 QUICK DRY CORK CEMENT....................................87
PIVOT SCREW KEY REAMERS...............................78 ~R~
PIVOT SCREWS, WOODWIND...............134, 135, 136 RAGGING TAPE.........................................................148
PLASTIC GLUE ABS..................................................110 RAISED TONE HOLE JIG, CLARINET..................103
PLASTIC ROD, ABS...................................................110 RAKE, BUFF................................................................148
PLASTIC STORAGE BOXES....................................172 RAWHIDE MALLETS..................................................37
PLATE, TROMBONE SLIDES....................................50 RAWHIDE STRIPS.......................................................55
PLATERS BRUSH, LONG HANDLED....................168 RAZOR BLADES, SINGLE EDGE.............................86
PLIERS........34, 38, 64, 68, 69,70,90, 105, 107, 109, 137 REAMER, CLARINET BELL TENON.......................97
PLIERS, ACCORDION...............................................137 REAMER, PIVOT SCREW KEY.................................78
PLIERS, CHAIN NOSE...............................................109 REAMERS, ADJUSTABLE/BLADES.........................36
PLIERS, CURVED NOSE...........................................107 REAMERS, MOUTHPIECE RECEIVER...................36
PLIERS, DUCKBILL.............................................38, 109 REAMERS, PAD SEAT...............................................100
PLIERS, FLAT NOSE.........................................107, 109 RECEIVER, MTHPIECE FORMING MDRLS.........36
PLIERS, FLUTE BOOSTER INSTALLATION.........70 RED ROUGE................................................................149
PLIERS, FL BOOSTER/GRMT REMOV...................70 REDUCER/RETARDER, LACQUER...............158, 161
PLIERS, HOOK NOSE KEY LEVER.........................68 REED TESTING/TUNING TLS, ACCORDION......137
PLIERS, NEEDLE SPRING REMOVER...................68 REFILLS, BUTANE TORCH.......................................95
PLIERS, NEEDLE SPRING REPLACEMENT.........68 REPAIR KITS.........................................................59, 193
PLIERS, PARALLEL ACTION.................................107 REPAIR MANUALS.................................................57,58
PLIERS, ROUND NOSE...............................................69 RESONATOR/RIVET KITS.......................................128
PLIERS, SLIDE REMOVER...................................11,34 RESONATORS, SAX PADS...............................128, 129
PLIERS, SLIP JOINT..................................................107 RETARDER, LACQUER....................................158, 161
PLIERS, SPRING PUNCHING....................................68 REVERSIBLE SCRAPER, BLADES.........................167
PLIERS, SWEDGING....................................................64 RIBBON SOLDER.......................................................166
PLIERS, TUNING SLIDE REMOVER.......................11 RIGHT ANGLE DENT TOOLS...................................38
PLUG HOLDER, LOWER TENON............................97 RIGHT ANGLE EXPANDERS....................................26
PLUGS, FLUTE............................................................189 RING SHRINKING DIES, WOODWIND.................104
PLUGS, GLUE..............................................................105 RINGS, BURNISHING............................................35, 49
POLISHES, BRASS & SILVER.................................156 RINGS, DRAW.........................................................35, 37
POLISHING HOLDER, COR/TRPT...........................53 RINGS, SOLDER ON FINGER..................................172
POLISHING WHEEL, STEEL...................................148 RIVET PUNCH, SAX PAD.........................................130
POLYGON VALVE SPRINGS.....................................54 RIVET WASHERS.......................................................188
PORTABLE AIR BUFFER/ACCESSORIES............150 RIVETS...................................................................130,188
POST BODY COUNTERSINKS..................................62 ROCKET ROLLER.......................................................51
POST DRILLING JIG/ACCESSORIES......................82 ROD, ABS PLASTIC...................................................110
POST LCKNG SC CNTERSINKS/DRILL.................62 ROD, DELRIN..............................................................110
POST RAISING TOOL, SAX.......................................55 ROD, DRILL STACK....................................................74
POST/BODY COUNTERSINKS..................................62 ROD, SOLID BRASS...................................................107
POSTS, SAX ASSORTMENT.......................................55 ROD, TROMBONE VENTURI....................................22
POWER DISCS.................................................................4 RODS, CLEANING................................................62, 168
POWER DISC ROLLERS...........................................5, 6 RODS, SANDING...........................................................64
PRESERVATIVE, PAD...............................................191 ROLLER, CONE SHAPED...........................................23
PRESSURE SENSITIVE TEFLON..............................73 ROLLER DENT BALLS...............................................22
PRITCHARD CABLE SYSTEM (TUBA)...................15 ROLLER, ROCKET......................................................51
PROTECTOR, CORK.................................................142 ROLLERS, DOUBLE HAND........................................23
PROTECTOR, PEARL................................................102 ROLLER, EXTRA LONG.............................................23
PROTECTOR STRIPS................................................183 ROLLERS, POWER DISC..............................................4
PULLER, MOUTHPIECE............................................25 ROTOR BEARING PLATE TOOL.............................58
PUMICE..........................................................................12 ROTARY VALVE BEARING TOOL..........................51
PUNCH, FLAT SPRING HOLE...................................71 ROUND NOSE PLIERS....................................38,69,105
PUNCH, HOLE FOR STRAPS OR PADS................185 ROUND SPRINGS, STAINLESS STEEL.................131
PUNCH, PAD RIVET..................................................130 RUBBER WEDGES.......................................................85
PUNCHES, CENTER & DRIVE TAPER....................93 RULERS........................................................................174
PUNCHES, SPRING......................................................67 RUST INHIBITOR.......................................................154
200
 Index by name

INDEX BY NAME
~S~ ~S cont.~
SAFETY FLANGE NUTS, BUFFER SHAFT...........146 SCREWS, BARITONE & BELL................................133
SAFETY LIGHT FIXTURES.....................................159 SCREWS, LIGATURE & LYRE ...............................133
SAND BLASTER, NOZZLES & JETS......................155 SCREWS, SAX NECK.................................................133
SANDERS, BELT/DISKS............................................144 SCREWS, SOUSAPHONE..........................................133
SANDING RODS............................................................64 SCREWS, WOODWIND.............................134, 135, 136
SANIMIST MOUTHPIECE DISINFECTANT.........171 SCRIBER, MAGNETIC................................................13
SAW BLADES, JEWELERS......................................181 SEATING CLIPS, FLUTE PAD...................................85
SAW, METAL BACK..................................................108 SEPARATORS, TROMBONE JOINT.........................18
SAX ASSEMBLY MANDREL......................................53 SHAFT ARBOR, UTILITY...........................................91
SAX BELL SHOES..........................................................2 SHAFT SAFETY FLANGE NUTS.............................146
SAX BODY DENT REMOVER....................................58 SHAFT SPACERS, BUFFER......................................146
SAX BODY BOW DENT REMOVER.........................56 SHANK, MOUTHPIECE ARBOR...............................18
SAX BODY HOLDING WHEEL.................................83 SHEET CORK..............................................................141
SAX BODY ROLLERS....................................................2 SHEETS, ABRASIVE & TEFLON......................73, 176
SAX BODY STRAIGHTENING TOOL......................56 SHELLAC, STICK, FLAKE.........................................88
SAX BORE CLEANING BRUSH...............................170 SHELLAC SPATULAS.................................................88
SAX BUMPER ADJUSTER..........................................90 SHIM STOCK, FLUSHBANDING.............................106
SAX DENT BALLS SLOTTED....................................57 SHOP APRON..............................................................191
SAX DENT ROD GUIDES............................................57 SHORTENERS, HINGE TUBE....................................76
SAX END PLUGS.........................................................192 SHRINKABLE TUBING...............................................73
SAX FLAT SPRINGS..................................................132 SHRINKER, TUBING...................................................28
SAX GOOSENECK DENT ROD..................................56 SHRINKING DIES, WOODWIND RING.................104
SAX HOLDING WHEEL..............................................83 SILICON CARBIDE WHEEL......................................64
SAX KEY BENDING LEVERS....................................72 SILVER CLEANER.....................................155, 156, 157
SAX KEY FELTS.........................................................143 SILVER POLISHES & SPRAY..................................156
SAX KEY GUARD SCREWS.....................134, 135, 136 SILVER SOLDER/ACCESSORIES...................164, 166
SAX KEY LEVELING TOOLS....................................72 SILVER TARNISH REMOVER................................155
SAX KEY SWEDGING DIE.........................................90 SILVO............................................................................156
SAX NECK CLEANER...............................................170 SKIN, FISH...................................................................102
SAX NECK EXPANDERS............................................81 SLEEVE MANDRELS, VALVE..................................45
SAX NECK HOLDER....................................................67 SLIDE BUMPER REMOVER, TROMBONE............18
SAX NECK PLUGS......................................................192 SLIDE CLEANING RODS..........................................168
SAX NECK SCREW EXTRACTOR............................67 SLIDE CREAM............................................................191
SAX NECK SCREWS..........................................133, 136 SLIDE DENT REMOVER, TROMBONE...................50
SAX OCTAVE KEY LEVER TUBING.......................73 SLIDE DENT REMOVER, YAMAHA TUNING.......58
SAX PAD HEIGHT GAUGES......................................67 SLIDE DENT TOOL, TROMBONE ROLLING........49
SAX PAD RESONATORS...................................128, 129 SLIDE GREASE, TUNING SLIDE............................191
SAX PAD RIVETS.......................................................130 SLIDE MANDRELS, TROMBONE.............................49
SAX PADS..............................................................120-127 SLIDE OIL....................................................................191
SAX POST ASSORTMENT..........................................55 SLIDE PLATE, TROMBONE......................................50
SAX POST RAISING TOOL........................................55 SLIDE PLIERS, TUNING SLIDE................................11
SAX SLOTTED BARREL SHAPED PUSH BALLS..57 SLIDE PULLING TOOLS......................................55, 58
SAX STRAPS................................................................185 SLIDE REMOVING COLLARS, TROMBONE........18
SCALE/LIME REMOVER.........................................154 SLIDE REMOVER PLIERS...................................11, 34
SCRAPERS, CURVED/TRIANG/REVERS..............163 SLIDE SOLDER ROD...................................................53
SCRATCH BRUSHES & BUFFING MACHINE.....151 SLIDE SPACING TOOLS, TROMBONE...................55
SCREW EXTRACTORS.......................................67, 174 SLIDE SPRAY BOTTLE, TROMBONE...................191
SCREW HOLDING SCREWDRIVER........................66 SNEAKY LIGHTS.........................................................83
SCREW KITS...............................................................133 SNIPS.............................................................................108
SCREW SLOTTING TOOL/BLADES........................82 SOCKET GRAFTING JIG/ACCESSORIES..............99
SCREWDRIVER BLADE/MAGNETIZER................66 SOCKET GRAFT BLANKS.........................................99
SCREWDRIVER, FLUTE ROD COMB.....................62 SOCKETS, SOLDER ON TYPE................................172
SCREWDRIVER/SPRING HOOK COMBO..............66 SOLDER, ALL TYPES........................................164, 166
SCREWDRIVERS................................................62,65,66 SOLDER CLIPS, CLAMPS........................................167
SCREWDRIVERS, BLADES..................................65, 66 SOLDER FLUXES, ANTI FLUX.......................164, 166
201
 Index by name
INDEX BY NAME

~S cont.~ ~S cont.~
SOLDER JIG................................................................163 STRAPS, SAX...............................................................185
SOLDER JOINT CLEANING BRUSHES................164 STRIPPER, LACQUER...............................................157
SOLDER ON FINGER RINGS...................................172 STRIPS, TARNISH PROTECTOR............................183
SOLDER SCRAPERS..................................................163 STRIPS/ROLLS EMERY PAPER..............................176
SOLDERING KIT, EXCALIBUR..............................162 STUDS, FOR CASE BOTTOMS................................188
SOLDERING CLAMPS...............................................167 SWABS..........................................................................170
SOLID HINGE TUBE SHORTENER..........................76 SWEDGING DIES, FLUTE & PICCOLO..................81
SOLVENT/CLEANER.................................................191 SWEDGING DIES, SAX KEY......................................90
SOLVENT, CORK CEMENT.......................................87 SWEDGING PLIERS.....................................................64
SOLVENT, HOT STUFF GLUE..................................75 SWEDGING TOOLS, WOODWIND KEY.................69
SOLVENT, JET/CLEAR MAGIC GLUE...................75 SWEDISH STYLE PLIERS..................................38, 105
SOUSAPHONE BELL FLAIR ROLLER......................2 SWITCH, FOOT OPERATED MOTOR.....................63
SOUSAPHONE BELL JACK.......................................27 SWIVEL TOP SCREWDRIVERS...............................66
SOUSAPHONE BELL SHOE.........................................2 SYNTHETIC LUBRICANT...........................2,10,44,183
SOUSAPHONE BRANCH ROLLERS..........................2 ~T~
SOUSAPHONE EXPANDABLE DENT TOOLS.......25 TANK/BARREL LINERS...........................................157
SOUSAPHONE GRILL...............................................171 TAP WRENCH.............................................................179
SOUSAPHONE HAND DENT ROD............................27 TAPE, ABRASIVE.......................................................176
SOUSAPHONE HOLDER...........................................171 TAPE, RAGGING........................................................148
SOUSAPHONE SCREWS, NECK & BELL.............133 TAPER ARBOR, MORSE.............................................90
SOUSAPHONE SLIDE DENT TOOLS, EXP.............25 TAPERED MANDRELS.........................................32, 33
SPACERS, BUFFING WHEEL..................................146 TAPERED MOUTHPIPE CABLE KIT.......................24
SPATULA, CRACK SLICK & SHELLAC................88 TAPERED SPINDLES, BUFFER & MOTOR
SPINDLE ADAPTORS..................................................63 SHAFT.....................................................................63, 146
SPINDLES, BENCH MOTOR......................................64 TAPS, SCREW THREADING & DIES.....................179
SPINDLES, TAPERED BUFFER...............................146 TARNI-SHIELD...........................................................156
SPRAY BOTTLE, TROMBONE SLIDE...................191 TARNISH PROTECTOR STRIPS.............................183
SPRAY GUNS/ATTACHMENTS...............................160 TARNISH REMOVER................................................155
SPRAY LACQUER, AEROSOL.................................159 TEFLON SHEET, PRESSURE SENSITIVE..............73
SPRING HOLE PUNCH................................................71 TELESCOPING GAUGES..........................................174
SPRING HOOKS................................................66, 67, 70 TENON CAPS, WOODWIND......................................78
SPRING INSTALLING JIG, WATERKEY................54 TENON EXPANDERS.............................................80, 81
SPRING PUNCHES.......................................................67 TENON PLUG HOLDER..............................................97
SPRING PUNCHING, REMOVING PLIERS............68 TENON PLUG MATERIAL.......................................110
SPRING REPLACING PLIERS...................................68 TENON PLUGS FOR REPLACEMENT....................97
SPRING SCREWS, WOODWIND.............134, 135, 136 TENON REAMER, CLARINET BELL.......................97
SPRING VIAL HOLDER, WOOD.....................131, 132 TENON REPLACEMENT TOOLS.......................97, 98
SPRING VIALS....................................................131, 132 TENON SLEEVE, FLUTE..........................................100
SPRING WIRE, FLUTE/PICCOLO..........................132 TENON SWEDGER, HEAVY DUTY..........................80
SPRINGS, FLAT WOODWIND.........................130, 132 TENON TOOL, OBOE CENTER TOOL....................97
SPRINGS, NEEDLE/ROUND.....................................131 TESTING CORKS.........................................................83
SPRINGS, POLYGON VALVE....................................54 TESTING FEELER HOLDER.....................................67
SPRINGS, STAINLESS STEEL ROUND.................131 THINNER, LACQUER........................................158, 161
SPRINGS, VALVE & WATERKEY ...........................54 THREAD GAUGES.....................................................179
STACK ROD...................................................................74 THREAD MANDRELS, VALVE.................................39
STAIN, BLACK PIGMENT..........................................75 THREAD RESTORING TOOLS.................................52
STAINLESS STEEL ROUND SPRINGS..................131 THUMB RESTS............................................................171
STAKING TOOL, HEAT............................................129 THMB REST SCRWS OVERSIZE/REG...........135,136
STAND, MEDIUM DUTY VISE.................................173 THUMB TUBE REMOVER..........................................90
STAND, TROMBONE LEVELING STONE..............48 TONE HOLE CUTTER SET/ACCESS.............101, 103
STERISOL....................................................................171 TONE HOLE FILES......................................................76
STICK SHELLAC..........................................................88 TONE HOLE PAD SEAT FILES...............................100
STOP HINGES.............................................................188 TONE HOLE REFACING TOOL, SAX......................77
STORAGE BOXES......................................................172 TONE HOLE REPAIR, GLUE PLUGS....................105
STORAGE CABINETS, CHESTS..............................172 TONE HOLE REPLACEMENT TOOLS..........101, 103
202
 Index by name

INDEX BY NAME
~T cont.~ ~U~
TONE HOLE UNDERCUTTER TOOLS....................79 UNIVERSAL BELL IRON............................................31
TOOL CHESTS............................................................172 UNIVERSAL TAPERED MANDRELS.......................32
TOOL HANGERS........................................................186 UTILITY ARBOR, MOTOR SHAFT..................91, 146
TORCHES/ACCESSORIES.........................95, 162, 165 UTILITY BENCH HAMMER....................................130
TORX DRIVER..............................................................90 UTILITY KNIFE............................................................86
TRADEMARK CRAYON, GOLD.............................102 ~V~
TRANSFORMER, LEAKLIGHT.................................84 V-BLOCK................................................................29, 173
TRAY, FLUTE..............................................................154 VALVE BEARING TOOL, ROTARY VALVES........51
TREBLE KEY ADJ TOOLS, ACCORDION............137 VALVE BRUSHES.......................................................168
TRIANGULAR SOLDER SCRAPER........................163 VALVE CASING/SLEEVE CHARTS...................46, 47
TRIPOLI CAKE...........................................................149 VALVE CASING MANDRELS....................................45
TROMBONE BELL MANDREL.................................31 VALVE CLEANING ROD..........................................168
TROMBONE BUMPER REMOVER..........................18 VALVE GUIDE FITTING TOOL................................38
TRMB BMPR, STRAIGHT TUBE CORKS.............140 VALVE GUIDES............................................................38
TROMBONE CLEANING ROD, WOOD HDL.......168 VALVE INSTRUMENT HOLDING JIG....................53
TROMBONE CORK BARREL DENT REMOVER..34 VALVE LAPPING BLOCKS........................................12
TROMBONE CORK BARREL SPACERS.................18 VALVE LAPPING COMPOUND................................12
TROMBONE DENT HAMMER..................................20 VALVE LAPPING MOTOR.........................................12
TROMBONE EXPANDABLE DENT TOOLS...........50 VALVE MIRROR..................................................38, 143
TROMBONE JOINT SEPARATORS..........................18 VALVE OIL..................................................................191
TROMBONE LEVELING STONE..............................48 VALVE SLEEVE MANDRELS....................................45
TROMBONE ROLLING SLIDE DENT TOOL.........49 VALVE SPRINGS..........................................................54
TROMBONE SLIDE BURNISHING RING...............49 VALVE THREAD CHARTS...................................40-43
TROMBONE SLIDE DENT REMOVER/EXP...........50 VALVE THREAD MANDRELS..................................39
TROMBONE SLIDE MANDRELS..............................49 VENTURI ROD, TROMBONE....................................22
TROMBONE SLIDE PLATE.......................................50 VIAL HOLDER, WOOD......................................130-132
TROMBONE SLIDE REMOVER COLLARS...........18 VIALS, SPRING....................................................131-132
TROMBONE SLIDE SPACING TOOLS....................55 VINYL TUBING.....................................................73, 177
TROMBONE SLIDE SPRAY BOTTLE....................191 VISE STAND, MEDIUM DUTY & HEAVY.............173
TROMBONE VENTURI RODS...................................22 VISES...........................................................3, 25, 137, 173
TRUMPET MOUTHPIPE DENT ROD.......................24
TRUMPET MOUTHPIPE DENT ROLLER KIT......24 ~W~
TRUMPET PEARL BUTTONS..................................172 WASHERS, CORK......................................................139
TUBA DENT BALLS.....................................................16 WASHERS, FELT........................................................143
TUBA DENT REMOVAL CABLE SYSTEM.......17, 20 WASHERS, METAL FLUTE PAD.............112, 134-136
TUBA POLYGON VALVE SPRINGS.........................54 WASHERS, PAPER FLUTE.......................................112
TUBE CORKS..............................................................140 WASHERS, RIVET......................................................188
TUBES, FLOURESCENT LEAK LIGHT...................84 WATER KEY INSTALLING JIG................................54
TUBING BENDING JIG...............................................32 WATER KEY SPRINGS...............................................54
TUBING CLEANER BALLS......................................157 WATER KEYS...............................................................54
TUBING TRUE TOOL..................................................48 WAX...............................................................................137
TUBING, FLEXIBLE (BUFFING HOODS).............150 WAX SPOON, ACCORDION.....................................137
TUBING, FLEXIBLE VINYL......................................73 WEDGES, RUBBER & WOOD....................................85
TUBING, HEAT SHRINK.............................................73 WET & DRY ABRASIVE PAPER.............................176
TUBING, HOT STUFF GLUE......................................75 WHEEL, BURNISHING..................................................3
TUBING, SAX OCTAVE KEY LEVER......................73 WHEEL, SAX BODY.......................................................2
TUBULAR HINGE TUBING SHORTENERS...........76 WENOL POLISH.........................................................155
TUNE LUBE.................................................................183 WHOLE SPRING REMOVING PLIERS...................68
TUNING BITS, MOUTHPIECE.................................177 WICK, ALCOHOL LAMP............................................95
TUNG SL DNT BL HAMMER, FR/HORN.................21 WIRE, BINDING..........................................................167
TUNING SLIDE GREASE..........................................191 WIRE, CRACK PINNING............................................69
TUNING SLIDE MEASURING TOOL.......................32 WIRE CUTTERS.........................................................108
TUNING SLIDE PLIERS..............................................11 WOOD ASSEMBLY MANDRELS..............................53
TUNING SLIDE REMOVAL TOOLS.............11,55,58 WOOD CONDITIONER OIL.....................................191
TWEEZERS..................................................................175 WOOD MANDRELS.........................................53,56,154
WOOD WEDGES...........................................................85
203
 Index by name
INDEX BY NAME

~W cont.~
WOODEN SPRING VIAL HOLDER.................130-132
WOODWIND ASSEMBLY BOARDS.......................106
WOODWIND KEY LEVELING TOOLS.............68, 72
WOODWIND KEY SWEDGING TOOLS..................69
WOODWIND LIVE CENTER......................................91
WOODWIND PIVOT SCREW COUNTERSINKS....78
WOODWIND REPAIR HOLDER...............................70
WOODWIND SCREWS.......................................133-136
WOODWIND SPRINGS......................................130-132
WOODWIND SWABS.................................................170
WOODWIND TENON CAPS.......................................78
W/W TENON CUTTER/ACCESSORIES.............97, 98
WORK BASKET..........................................................154
WRENCH, TAP............................................................179
~Y~
Y TUBE FOR BUFFING TUBES...............................150
YAMAHA TUNING SLIDE DENT REMOVAL
KIT...................................................................................58

~SHOP SET UPS~

BRASSWIND BENCH.................................................152
DENT MACHINE & ACCESSORIES.........................96
SPECIALTY WOODWIND TOOLS.........................138
WOODWIND SHOP SET UP.....................................116

204
 Index by item number

INDEX BY ITEM NUMBER

~A~ ~A cont.~
A1-CORK WASHERS.................................................139 A61-1/4” SHEET CORK..............................................141
A2-CORK WASHERS.................................................139 A61A-REALCORK 1/4”..............................................141
A3-CORK WASHERS.................................................139 A62-3/64” SHEET CORK............................................141
A4-CORK WASHERS.................................................139 A62A-REALCORK 3/64”............................................141
A14-CORK WASHERS...............................................139 A63-VERY THIN SHEET CORK..............................141
A15-CORK WASHERS...............................................139 A64A-REALCORK 7/32”............................................141
A16-CORK WASHERS...............................................139 A65A-REALCORK ASSORTMENT.........................141
A17-CORK WASHERS...............................................139 A66-SMALL MUTE CORKS......................................141
A18A-FRENCH HORN CORKS................................139 A67-LARGE MUTE CORKS......................................141
A18B-FRENCH HORN CORKS................................139 A70-FELT BUMPERS.................................................142
A18C-FRENCH HORN CORKS................................139 A71-FELT BUMPERS.................................................142
A18D-FRENCH HORN CORKS................................139 A72-FELT BUMPERS.................................................142
A19W-WHITE FELT SQUARE.................................143 A73-FELT BUMPERS.................................................142
A20-NEOPRENE BUMPERS.....................................140 A74-FELT BUMPERS.................................................142
A21-BUMPER RUBBERS FOR TUBA.....................140 A75-FELT BUMPERS.................................................142
A26-FLUTE KEY CORKS..........................................139 A76-FELT BUMPERS.................................................142
A27-STRAIGHT WATER KEY CORKS..................139 A77-SAX KEY FELTS.................................................143
A28-STRAIGHT WATER KEY CORKS..................139 A78-SAX KEY FELTS.................................................143
A29-STRAIGHT WATER KEY CORKS..................139 A79-SAX KEY FELTS.................................................143
A33-TAPERED WATER KEY CORKS....................139 A80-VALVE WASHERS, FELT.................................143
A34-TAPERED WATER KEY CORKS....................139 A81-VALVE WASHERS, FELT.................................143
A35-TAPERED WATER KEY CORKS....................139 A82-VALVE WASHERS, FELT.................................143
A36-TAPERED WATER KEY CORKS....................139 A83-VALVE WASHERS, FELT.................................143
A40-SLOTTED TUBE CORKS..................................140 A84-VALVE WASHERS, FELT.................................143
A41-PICCOLO HEAD CORKS..................................140 A85-VALVE WASHERS, FELT.................................143
A42-FLUTE HEAD CORKS.......................................140 A86-VALVE WASHERS, FELT.................................143
A42A-ALTO FLUTE HEAD CORKS........................140 A88-VALVE WASHERS, FELT.................................143
A43-BASSOON BOCAL TUBE CORKS...................140 A89-VALVE WASHERS, FELT.................................143
A44-SAX & TROMBONE SLIDE BUMPER A90-VALVE WASHERS, FELT.................................143
CORKS..........................................................................140 A91-VALVE WASHERS, FELT.................................143
A45-SMALL ALTO SAX TUBE CORKS.................140 A92-VALVE WASHERS, FELT.................................143
A46-REG. ALTO, C-MEL, TENOR TUBE A93-VALVE WASHERS, FELT.................................143
CORKS..........................................................................140 A95-VALVE WASHER, FELT ASSORTMENT......143
A47-TENOR, BARI SAX TUBE CORKS..................140 A96-WHITE FELT BUMPER ASSORTMENT.......142
A48-ALTO, C-MELODY TAPERED TUBE A97-WHITE SAX FELT ASSTORTMENT..............143
CORKS..........................................................................140 A99-VALVE WASHERS, FELT.................................143
A49-TENOR, BARI TAPERED TUBE CORKS.......140 A110-METAL FLUTE PAD WASHERS (16-18.5)...112
A50-WATER KEY CORK ASSORTMENT.............139 A110A-100 METAL FLUTE WASHER ASST.........112
A51-CORK WASHER ASSORTMENT....................139 A112EEF-E FLAT KEY CORKS...............................139
A52-FRENCH PLUG SET (METAL W/CORK)......136 A112ETR-TRILL KEY CORKS.................................139
A52P-FRENCH PLUG SET (PLASTIC)...................136 A112GEF-E FLAT KEY CORKS...............................139
A54-CORK PADS.........................................................141 A112GTR-TRILL KEY CORKS................................139
A54A-ASSORTMENT OF 100 CORK PADS...........141 A112UEF-E FLAT KEY CORKS...............................139
A54-ALL-CORK PAD ASST. (SIZES 6-13)..............141 A112UTR-TRILL KEY CORKS................................139
A55-1/64” SHEET CORK............................................141 A112YEF-E FLAT KEY CORKS...............................139
A56-1/32” SHEET CORK............................................141 A112YTR-TRILL KEY CORKS................................139
A56A-REALCORK 1/32”............................................141 A120-BL-BLACK SYNTHETIC FELT SHEETS.....143
A57-1/16” SHEET CORK............................................141 A120-BR-BROWN SYNTHETIC FELT SHEETS...143
A57A-REALCORK 1/16”............................................141 A120-WH-WHITE SYNTHETIC FELT SHEETS...143
A58-3/32” SHEET CORK............................................141 A121-BL-BLACK SYNTHETIC FELT SHEETS.....143
A58A-REALCORK 3/32”............................................141 A121-BR-BROWN SYNTHETIC FELT SHEETS...143
A59-1/8” SHEET CORK..............................................141 A121-WH-WHITE SYNTHETIC FELT SHEETS...143
A59A-REALCORK 1/8”..............................................141 A122-BL-BLACK SYNTHETIC FELT SHEETS.....143
A60-3/16” S HEET CORK...........................................141 A122-BR-BROWN SYNTHETIC FELT SHEETS...143
A60A-REALCORK 3/16”............................................141
205
 Index by item number
INDEX BY ITEM NUMBER

~A cont.~ ~B cont.~
A122-WH-WHITE SYNTHETIC FELT SHEETS...143 B255-500 CLARINET PAD ASSORTMENT............114
A123-BL-BLACK SYNTHETIC FELT SHEETS.....143 B255C-500 CL PAD ASST W/CABINET..................114
A123-BR-BROWN SYNTHETIC FELT SHEETS...143 B26-FLUTE PADS, YELLOW, DBL SKIN...............115
A123-WH-WHITE SYNTHETIC FELT SHEETS...143 B26B-FLUTE PAD SET...............................................115
APRON-FERREE’S SHOP APRON.............................191 B261-100 FLUTE PAD ASSORTMENT....................115
~B~ B28-PICCOLO PADS, YELLOW, DBL SKIN.........115
B7-WHITE FLUTE PADS, NEEDLE FELT.............115 B28B-PICCOLO PAD SET.........................................115
B7B-FLUTE PAD SET.................................................115 B281-100 PICCOLO PAD ASSORTMENT...............115
B71-100 FLUTE PAD ASSORTMENT......................115 B29-FLUTE PADS, DBL SKIN, THIN......................115
B8-YELLOW FLUTE PADS, NEEDLE FELT.........115 B29B-FLUTE PAD SET...............................................115
B8B-FLUTE PAD SET.................................................115 B291-100 FLUTE PAD ASSORTMENT....................115
B81-100 FLUTE PAD ASSORTMENT......................115 B30-FLUTE PADS, DBL SKIN, WOVEN FELT......115
B9-NORBECK CLARINET PADS (MED)................114 B30B-FLUTE PAD SET...............................................115
B9A-NORBECK CLARINET PADS (MED THK)...114 B301-100 FLUTE PAD ASSORTMENT....................115
B9AB-NORBECK CLARINET PAD SET.................114 B30H-HARMONY FLUTE PADS, DBL SKIN.........115
B9B-NORBECK CLARINET PAD SET....................114 B30HB-FLUTE PAD SET............................................115
B91-100 NORBECK CLARINET PAD ASST...........114 B31-FLUTE PADS, DBL SKIN, NEEDLE FELT.....115
B95-500 NORBECK CLARINET PAD ASST...........114 B31B-FLUTE PAD SET...............................................115
B95C-500 NORBECK CL PAD ASST W/ B311-100 FLUTE PAD ASSORTMENT....................115
CABINET.................................................................114 B32-TAN KID PADS....................................................115
B10-CLARINET PADS, SINGLE SKIN....................114 B32A-SOPRANO CLARINET PAD SET..................115
B10B-CLARINET PAD SET.......................................114 B32B-ALTO CLARINET PAD SET..........................115
B101-100 CLARINET PAD ASSORTMENT............114 B32C-BASS CLARINET PAD SET............................115
B105-500 CLARINET PAD ASSORTMENT............114 B32D-BASSOON PAD SET.........................................115
B105C-500 CL PAD ASST W/CABINET..................114 B321-100 TAN KID PAD ASSORTMENT................115
B11-CLARINET PADS, DOUBLE SKIN..................114 B33-WHITE KID PADS..............................................115
B11B-CLARINET PAD SET.......................................114 B33A-SOPRANO CLARINET PAD SET..................115
B111-100 CLARINET PAD ASSORTMENT............114 B33B-ALTO CLARINET PAD SET..........................115
B115-500 CLARINET PAD ASSORTMENT............114 B33C-BASS CLARINET PAD SET............................115
B115C-500 CL PAD ASST W/CABINET..................114 B33D-BASSOON PAD SET.........................................115
B17-CLARINET PADS, DEJUR, DOUBLE B331-100 WHITE KID PAD ASSORTMENT...........115
SKIN...............................................................................114 B33OWP-OVAL WHISPER KEY PADS..................115
B17B-CLARINET PAD SET.......................................114 B35-OBOE PADS, DBL SKIN....................................115
B171-100 CLARINET PAD ASSORTMENT............114 B35B-OBOE PAD SET................................................115
B175-500 CLARINET PAD ASSORTMENT............114 B351-100 BASSOON PAD ASSORTMENT..............115
B175C-500 CL PAD ASST W/CABINET..................114 B37-PICCOLO PADS, DBL SKIN.............................115
B20-CLARINET PADS, SINGLE SKIN....................114 B37B-PICCOLO PAD SET.........................................115
B20B-CLARINET PAD SET.......................................114 B371-100 PICCOLO PAD ASSORTMENT...............115
B201-100 CLARINET PAD ASSORTMENT............114 B38-FLUTE PADS, YELLOW, DBL SKIN...............115
B205-500 CLARINET PAD ASSORTMENT............114 B38B-FLUTE PAD SET...............................................115
B205C-500 CL PAD ASST W/CABINET..................114 B381-100 FLUTE PAD ASSORTMENT....................115
B21-CLARINET PADS, DOUBLE SKIN..................114 B39LA-LEBLANC ALTO CL SET............................113
B21B-CLARINET PAD SET.......................................114 B39LB-LEBLANC BASS CL SET..............................113
B211-100 CLARINET PAD ASSORTMENT............114 B40-PLAIN SAX PADS................................................120
B215-500 CLARINET PAD ASSORTMENT............114 B42-RIVET SAX PADS...............................................120
B215C-500 CL PAD ASST W/CABINET..................114 B43-FLAT METAL RESONATOR SAX PADS.......121
B24-CLARINET PADS, SINGLE SKIN....................114 B44-FLAT METAL RESONATOR SAX PADS.......121
B24B-CLARINET PAD SET.......................................114 B46-DOMED METAL RESO SAX PADS.................122
B241-100 CLARINET PAD ASSORTMENT............114 B47-DOMED METAL RESO SAX PADS.................122
B245-500 CLARINET PAD ASSORTMENT............114 B50-CONN RESO-PADS.............................................123
B245C-500 CL PAD ASST W/CABINET..................114 B52-THIN PAD W/PLASTIC RESO..........................124
B25-CLARINET PADS, DOUBLE SKIN..................114 B53-STANDARD PAD W/PLASTIC RESO..............124
B25B-CLARINET PAD SET.......................................114 B56-STANDARD PAD W/CONE RESO...................127
B251-100 CLARINET PAD ASSORTMENT............114 B58-THIN PAD W/HOLE...........................................125
B59-STANDARD PAD W/HOLE...............................125
206
 Index by item number

INDEX BY ITEM NUMBER

~B cont.~ ~C cont.~
B60-BUESCHER SNAP-ON SAX PADS...................123 C2F4-ARTLEY FLUTE ADJ SCREWS....................134
B62-THIN SAX PADS W/CONE RESO....................127 C2F6-ARLTEY FLUTE PAD SCREWS....................134
B64M-THIN DE’JUR SAX PADS W/HOLE.............126 C2F7-ARTLEY FLUTE PAD WASHERS.................134
B66M-STD DE’JUR SAX PADS W/HOLE...............126 C2F8-ARTLEY FLUTE PAD SPUDS........................134
B64V-THIN DE’JUR SAX PADS W/RIVET............126 C2F9-ARTLEY FLUTE GROMMETS......................134
B66V-STD DE’JUR SAX PADS W/RIVET...............126 C2F10-ARTLEY SILVER PLATE FLUTE
B64R-THIN DE’JUR SAX PADS W/PLASTIC CROWN.........................................................................134
RESO..............................................................................126 C2F11-ARTLEY NICKEL FLUTE CROWN...........134
B66R-STD DE’JUR SAX PADS W/PLASTIC C3AC1-BUESCHER ALTO CL PIVOT SCRWS.....134
RESO..............................................................................126 C 3 A R C 1 - BU E S C H E R /B U N D Y A L T O C L A D J
B64D-THIN DE’JUR SAX PADS W/DOMED METAL SCREWS........................................................................134
RESO..............................................................................126 C3B1-BUNDY BASSOON PIVOT SCREWS............134
B66D-STD DE’JUR SAX PADS W/DOMED METAL C3 BC1- BUNDY /BUESCHER BA SS CL PIVOT
RESO..............................................................................126 SCREWS........................................................................134
B45R-SELMER TYPE DOMED METAL RESOS...129 C3C1-BUNDY CLARINET PIVOT SCREWS.........134
B53R-SELMER TYPE PLASTIC RESOS................129 C3C3-BUNDY/BUESCHER G# ADJ SCREW.........134
B56R-PLASTIC CONE RESONATORS...................128 C3C5-BUNDY/BUESCHER CL/FL FLAT SPRING
B220-METAL RESONATORS 3/8”...........................129 SCREWS........................................................................134
B221-METAL RESONATORS 1/2”...........................129 C3F1-BUNDY FLUTE PIVOT SCREWS..................134
B222-METAL RESONATORS 3/4”...........................129 C3F4-BUNDY/BUESCHER FL ADJ SCREWS........134
B223-METAL RESONATORS 7/8”...........................129 C3F5-BUNDY/BUESCHER FL FLAT SPR
B230-METAL RIVETS, REGULAR 7/32”................130 SCREWS........................................................................134
B235-METAL RIVETS, EXTRA LONG...................130 C3F6-BUNDY/BUESCHER FL PAD SCREWS.......134
B260-ECONOMY UNIVERSAL RESO KIT............128 C3F7-BUNDY/BUESCHER FL PAD WASHERS....134
B265-DELUXE UNIVERSAL RESO KIT.................128 C3F8-BUNDY FLUTE PAD SPUDS..........................134
BA100-PAPER FLUTE WASHERS .003” THK.......112 C3F9-BUNDY FLUTE GROMMETS........................134
BA101-PAPER FLUTE WASHERS .006” THK.......112 C3F10-BUNDY SILVER PLATE FL CROWN........134
BA102-PAPER FLUTE WASHERS .012” THK.......112 C3F11-BUNDY NICKEL FLUTE CROWN..............134
BA103-PAPER FLUTE WASHERS .014” THK.......112 C3OB1-BUNDY OBOE PIVOT SCREWS................134
BA105-100 PAPER FLUTE WASHER ASST...........112 C3SA1-BUNDY SAX PIVOT SCREWS....................134
BR5A-CHAMOIS BUFF, 4”........................................147 C3SA2-BUNDY KEY GUARD SCREWS..................134
BR5B-CHAMOIS BUFF, 5”........................................147 C3SA5-BUNDY SAX FLAT SPR SCREWS..............134
BR5C-CHAMOIS BUFF, 4”........................................147 C4B1A-SCHREIBER HEADLESS PVT SCRWS....134
BR5D-CHAMOIS BUFF, 5”........................................147 C4F1-BUFFET,E&S,SCHREIBER FLUTE PIVOT
~C~ SCREWS........................................................................134
C1CF5-ARMSTRONG FLAT SPRING SCREWS...134 C4NC1-BUFFET, NEW MODEL, CL PIVOT
C1F1-ARMSTRONG FLUTE PIVOT SCREWS.....134 SCREWS........................................................................134
C1F4-ARMSTRONG FLUTE ADJ SCREWS..........134 C4OC1-BUFFET,E&S,SCHREIBER PIVOT
C1F6-ARMSTRONG FLUTE PAD SCREWS..........134 SCREWS........................................................................134
C1F7-ARMSTRONG FLUTE PAD WASHERS.......134 C4SA1-BUFFET SAX PIVOT SCREWS...................134
C1F8-ARMSTRONG FLUTE PAD SPUDS..............134 C4SA2S-SM BUFFET KEY GUARD SCRWS..........134
C1F9-ARMSTRONG FLUTE GROMMETS............134 C4SA2L-LG BUFFET KEY GUARD SCRWS.........134
C 1F10- A RM S T R O N G S I LV E R P LA T E F LU TE C5CF5-CONN,P.A.,CL/FL FLAT SPRING
CROWN.........................................................................134 SCREWS........................................................................134
C1F11-ARMSTRONG NICKEL FLUTE C5F1-NEW CONN, P.A. FL PIVOT SCREWS........134
CROWN.........................................................................134 C5F6-CONN, P.A. FLUTE PAD SCREWS...............134
C1NS1-ARMSTRONG NEW SAX PIVOT C5F7-CONN, P.A. FLUTE PAD WASHERS............134
SCREWS........................................................................134 C5F8-FLUTE CUP PAD SPUDS................................134
C1SA2-ARMSTRONG KEY GUARD SCREWS.....134 C5F10-CONN SILVER PLATE FL CROWN...........134
C2C1-ARTLEY CLAR PIVOT SCREWS.................134 C5F11-CONN NICKEL FLUTE CROWN................134
C2CF5-ARTLEY CLAR/FL FLAT SPRING C5NC1-CONN, P.A., CL PIVOT SCREWS..............134
SCREWS........................................................................134 C5NSA1-NEW CONN, P.A., SAX PIVOT
C 2 F 1 - A R T L E Y F L P I V O T SCREWS........................................................................134
SCREWS........................................................................134 C5OC1-OLD CONN CL PIVOT SCREWS...............134

207
 Index by item number
INDEX BY ITEM NUMBER

~C cont.~ ~C cont.~
C5SA2-CONN KEY GUARD SCREWS....................134 C13C14-VITO CLARINET COIL SPRINGS...........136
C5SA5-CONN SAX FLAT SPRING SCREWS.........134 C13C5-LEBLANC,NOBLET,VITO CLARINET FLAT
C6F1-DEFORD FLUTE PIVOT SCREWS...............134 SPRING SCREWS............................................136
C6F4-DEFORD FLUTE ADJ SCREWS...................134 C13F1-NOBLET,NORMANDY FL/OBOE PIVOT
C6F5-DEFORD FL FLAT SPRINGS SCREWS.......134 SCREWS........................................................................135
C6F6-DEFORD FLUTE PAD SCREWS...................134 C13F4-NOBLET,NORMANDY FL ADJ SCRWS....135
C6F7-DEFORD FLUTE PAD WASHERS................134 C13F6-NOBLET,NORMANDY FL PAD SCRWS...135
C6F8-DEFORD FLUTE PAD SPUDS........................134 C13NC1-LEBLANC,NOBLET NEW STYLE
C6F9-DEFORD FLUTE GROMMETS.....................134 HEADLESS CL PIVOT SCREWS.............................135
C6F10-DEFORD SILVER PLATE FL CROWN......134 C14B1-LINTON,SCHREIBER BASSOON PIVOT
C6F11-DEFORD NICKEL FLUTE CROWN...........134 SCREWS........................................................................135
C7B1-FOX BASSOON PIVOT SCREWS.................135 C14OB1-LINTON OBOE PIVOT SCREWS............135
C7OB1-FOX OBOE PIVOT SCREWS......................135 C15AS2-MARTIN ALTO SAX KEY GUARD
C8F1-GEMEINHARDT FL PIVOT SCREWS.........135 SCREWS........................................................................135
C8F4-GEMEINHARDT FL ADJ SCREWS.............135 C 1 5 T S 2 - MA R T I N T E N O R S A X K E Y G U A R D
C8F5-GEMEINHARDT FL FLAT SPRING SCREWS........................................................................135
SCREWS........................................................................135 C16AC1-SELMER ALTO CL NEW MODEL PIVOT
C8F6-GEMEINHARDT FLUTE PAD SCREWS.....135 SCREWS........................................................................135
C8F7-GEMEINHARDT FL PAD WASHERS..........135 C16AC4-SELMER ALTO/BASS CL NEW MODEL
C8F8-GEMEINHARDT FLUT PAD SPUDS............135 ADJUSTMENT SCREWS...........................................135
C8F9-GEMEINHARDT FLUTE GROMMETS.......135 C16B1-SELMER BASSOON NEW MODEL PIVOT
C8F10-GEMEINHARDT SILVER PLATE FL SCREWS........................................................................135
CROWN.........................................................................135 C16BC1-SELMER BASS CL NEW MODEL PIVOT
C8F11-GEMEINHARDT NICKEL FL CROWN.....135 SCREWS........................................................................135
C9F1-HAYNES FLUTE PIVOT SCREWS...............135 C16C1-SELMER CL NEW MODEL PIVOT
C9F6-HAYNES FLUTE PAD SCREWS....................135 SCREWS........................................................................135
C9F7-HAYNES FLUTE PAD WASHERS.................135 C16C5-SELMER CL FLAT SPRING SCREWS......135
C11C1-JUPITER CL PIVOT SCREWS....................135 C16F1-SELMER FL NEW MODEL PIVOT
C11C3-JUPITER CL G# ADJ SCREWS...................135 SCREWS........................................................................135
C11C5-JUPITER CL FLAT SPRING SCREWS......135 C16F4-SELMER FL ADJ SCREWS..........................135
C11F1-JUPITER FLUTE PIVOT SCREWS.............135 C16F5-SELMER FL FLAT SPRING SCREWS.......135
C11F4-JUPITER FL ADJ SCREWS..........................135 C16F6-SELMER FL NEW MODEL PAD SCRWS..135
C11F5-JUPITER FL FLAT SPRING SCREWS.......135 C16F7-SELMER FL NEW MDL PAD WASHERS..135
C11F6-JUPITER FLUTE PAD SCREWS.................135 C16F8-SELMER FL PAD CUP SPUDS.....................135
C11F7-JUPITER PAD WASHERS............................135 C16F9-SELMER FLUTE GROMMETS...................135
C11F9-JUPITER SAX PIVOT SCREWS..................135 C16OB1-SELMER OBOE NEW MODEL PIVOTS
C11F10-JUPITER SILVER PLATE FL CROWN....135 SCREWS........................................................................135
C11F11-JUPITER NICKEL FL CROWN.................135 C16OB4-SELMER OBOE NEW MODEL ADJ
C11SA1-JUPITER SAX PIVOT SCREWS...............135 SCREWS........................................................................135
C11SA2L-JUPITER LG KEY GUARD SCREWS...135 C16SA1-SELMER SAX NEW MODEL PIVOT
C11SA2S-JUPITER SM KEY GUARD SCREWS...135 SCREWS........................................................................135
C11SA5-JUPITER SAX FLAT SPRG SCREWS......135 C16SA2-SELMER KEY GUARD SCREWS.............135
C1 2 B1-K ING , CLEV E LAN D BASSOO N PI VOT C16SA5-SELMER SAX NEW MODEL FLAT SPRING
SCREWS........................................................................135 SCREWS.......................................................135
C12C1-KING,CLEVELAND CL PIVT SCREWS...135 C17AC4-VITO ALTO/BASS CL ADJ SCREWS.....136
C12F1-CLEVELAND FL PIVOT SCREWS.............135 C17AS1-VITO ALTO SAX PIVOT SCREWS..........136
C12F10-KING SILVER PLATE FL CROWN..........135 C17AS2A-VITO ALTO SAX KEY GUARD
C12F11-KING NICKEL FLUTE CROWN...............135 SCREWS........................................................................136
C12SA2-KING KEY GUARD SCREWS...................135 C17AS2B-VITO ALTO SAX, MODEL 7133 SM, KEY
C13AC4-LEBLANC,NOBLET,VITO ALTO CL ADJ GUARD SCREWS........................................................136
SCREWS........................................................................135 C17AS2D-VITO ALTO SAX, MODEL 7133 KEY
C13C1-LEBLANC,NOBLET,OLD NORMANDY PIVOT GUARD SCREWS........................................................136
SCREWS..........................................................135 C17AS5-VITO ALTO SAX FLAT SPRG SCRWS...136
C13C12-LEBLANC,NOBLET,VITO THUMB REST C17BC1N-VITO BASS CL NEW PIVT SCREWS...136
SCREWS........................................................................135
208
 Index by item number

INDEX BY ITEM NUMBER

~C cont.~ ~C cont.~
C17BS2-VITO, HOLTON, MARTIN BARI SAX KEY C73EB/EN-8-36 SAX/SOUSA NECK SCREWS.......133
GUARD SCREWS................................................135, 136 C73GB/GN-10-32 SAX/SOUSA NECK SCREWS....133
C17C4-VITO CL ADJ SCFREWS.....................135, 136 C74FB/FN-4-.75 SAX NECK SCREWS.....................133
C17NC1-VITO CL PIVOT SCREWS................135, 136 C75HB/HN-1/4-20 SOUSA BELL SCREWS.............133
C17TS2-VITO MODEL 7131T,HOLTON SX604, C75JB/JN-5/16-24 SOUSA BELL SCREWS.............133
TENOR SAX KEY GUARD SCREWS..............135, 136 C75KB/KN-1/4-28 SOUSA BELL SCREWS.............133
C18B1-YAMAHA BASSOON PIVOT SCREWS.....136 C75LB/LN-1/4-24 SOUSA BELL SCREWS..............133
C18C1-YAMAHA CL PIVOT SCREWS.....................136 C76DB-8-32 BARITONE BELL NUT........................133
C18C3-YAMAHA CL G# ADJ SCREWS..................136 C76GB-10-32 BARITONE BELL NUT......................133
C18F1-YAMAHA FLUTE PIVOT SCREWS...........136 C77HB-1/4-20 SOUSA BELL NUT.............................133
C18F4-YAMAHA FLUTE ADJ SCREWS................136 C77JB-5/16-24 SOUSA BELL NUT............................133
C18F5-YAMAHA FL FLAT SPRING SCREWS......136 C77KB-1/4-28 SOUSA BELL NUT.............................133
C18F6-YAMAHA FLUTE PAD SCREWS................136 C77LB-1/4-24 SOUSA BELL NUT.............................133
C18F7-YAMAHA FL PAD WASHERS(ST OF 13)..136 ~D~
C18F10-YAMAHA SILVER PLATE FL CROWN..136 D1A-SPRING HOOK, MEDIUM.................................67
C18F11-YAMAHA NICKEL FLUTE CROWN.......136 D1B-SPRING HOOK, LARGE.....................................67
C18NS2-YAMAHA NECK SCRW 4MM X .70.........136 D2-CORK KNIFE...........................................................86
C18OB1-YAMAHA OBOE PIVOT SCREWS..........136 D2A-CORK KNIFE BLADE.........................................86
C18SA1-YAMAHA SAX PIVOT SCREWS..............136 D3-MOUTH BLOW PIPE FOR GAS..........................94
C18SA2-YAMAHA KEY GUARD SCREWS...........136 D4-MOUTH BLOW PIPE FOR ALCOHOL LAMP...94
C19F1-EMERSON FL PIVOT SCREWS..................134 D5-ADAPTOR CHUCK 0 TO 90..................................64
C19F4-EMERSON FL ADJ SCREWS.......................134 D6/D6A/D6B-BENCH PEGS.........................................86
C19F5-EMERSON FL FLAT SPRING SCREWS....134 D12A-CORK STRIP CUTTING GAUGE 4”............142
C19F6-EMERSON FLUTE PAD SCREWS..............134 D12B-CORK STRIP CUTTING GAUGE 12”..........142
C19F7-EMERSON FLUTE PAD WASHER.............134 D13-SAX PAD CUP HEIGHT GAUGE SET..............67
C19F9-EMERSON FLUTE GROMMET..................134 D14-SAX NECK SCREW EXTRACTOR...................67
C20SA1-BLESSING SAX PIVOT SCREW...............134 D14A-REPLACEMENT BLADE FOR D14................67
C30-100 CLARINET PIVOT SCREW ASST............136 D15S-COUNTERSINKS, SET OF 11...........................78
C31-100 SAX PIVOT SCREW ASST.........................136 D20/D20H-SM SOLID HINGE TUBE SHORT..........76
C32-100 FLUTE PIVOT SCREW ASST...................136 D21/D21H-LG SOLID HINGE TUBE SHORT...........76
C35-100 SCRWS FOR ALL INSTRUM. ASST........136 D22-BENCH MOTOR ADAPTOR...............................63
C41-PIVOT SCREWS 7.3MM....................................136 D23-STRAIGHT BURNISHER, SMALL....................30
C44-PIVOT SCREWS 8.1MM....................................136 D24-CURVED BURNISHER, SMALL........................30
C46-FRENCH CL FLAT SPRING SCREWS...........136 D25-STRAIGHT BURNISHER, SMALL....................30
C47-CONN SAX TOOL STEEL SCRW SM.............134 D26-CURVED BURNISHER, EXTRA SLIM.............30
C49-SAX FLAT SPRING SCREW.............................136 D27-0,2,4,6-JEWLERS SAW BLADES......................181
C50-THUMB REST SCREWS, NICKEL SILVER..136 D28-PAD RIVET PUNCH.............................................130
C50T-WOOD SCREW TAP........................................136 D29A-E-TUBULAR HINGE TUBE SHORTENERS...76
C51-THUMB REST SCREWS, NICKEL SILVER..136 D29AH-EH-SHORTENERS W/HANDLES................76
C60-NYLON BOOSTERS...........................................136 D29S-SET OF 5 TUBULAR HINGE TUBE SHORT...76
C70-100 SCREWS IN A KIT.......................................133 D29SH-SET OF 5 SHORTENERS W/HANDLES......76
C70AB/AN-6-32 LYRE SCREWS..............................133 D30-SINGLE EDGE RAZOR BLADES......................86
C70BB/BN-6-36 LYRE SCREWS...............................133 D32A/B-PENTAGON BROACHES.............................78
C70CB/CN-6-40 LYRE SCREWS..............................133 D33-BENCH KNIFE......................................................86
C70DB/DN-8-32 LYRE SCREWS..............................133 D34R/L-SHAFT ARBORS.............................................91
C70EB/EN-8-36 LYRE SCREWS...............................133 D35-TESTING FEELER HOLDER.............................67
C71AB/AN-6-32 LIGATURE SCREWS....................133 D36R/L-SHAFT ARBORS.............................................91
C71BB/BN-6-36 LIGATURE SCREWS.....................133 D38-SPRING PUNCHES...............................................67
C71DB/DN-8-32 LIGATURE SCREWS....................133 D40A/B/AH/BH-FRENCH HORN CORD...................28
C71EB/EN-8-36 LIGATURE SCREWS.....................133 D41-HEAT STAKING TOOL.....................................129
C71FB/FN-4-.75 LIGATURE SCREWS....................133 D42-DELUXE REVERSIBLE SCRAPER.................167
C72DB/DN-8-32 BARITONE BELL SCREWS........133 D42A-REPLACEMENT BLADES.............................167
C72GB/GN-10-32 BARITONE BELL SCREWS......133 D43-ACCORDION BASS BUTTON ADJ TOOL.....137
C73DB/DN-8-32 SAX/SOUSA NECK SCREWS......133

209
 Index by item number
INDEX BY ITEM NUMBER

~D cont.~ ~D cont.~
D44-PIN VISE.................................................................67 D120D-METRIC DIES.................................................179
D45-UTILITY KNIFE....................................................86 D120T-METRIC TAPS................................................179
D45A-EXTRA BLADES................................................86 D200D-DOMESTIC TAP & DIE SET........................179
D46-SHELLAC SPATULA SOP CL-MED.................88 D200-TAPS....................................................................179
D47-SHELLAC SPATULA BASS/ALTO CL-LG......88 D210-DIES.....................................................................179
D48-GOLD TRADEMARK CRAYON......................102 D220W-DRILL BITS.....................................................89
D49-WATER KEY INSTALLING JIG........................54 D220F-FRACTIONAL SIZE DRILL BITS.................89
D50-TUNING SLIDE MEASURING TOOL...............32 D220L-L HAND FRACTIONAL SIZE DRILL BIT....89
D54B-OBOE TENON CAP, BELL LG........................78 ~E~
D55A-CLARINET TENON CAP, BELL.....................78 E1-HOOK NOSE KEY LEVER PLIERS....................68
D55B-CLARINET TENON CAP, BARREL JOINT....78 E2A-COMPOUND LEVERAGE PLIERS...................64
D55C-CLARINET TENON CAP, CENTER JOINT....78 E3-SPRING REPLACEMENT PLIERS......................68
D55D-CL TENON CAP, CENTER JOINT W/G#......78 E4-SPRING PUNCHING PLIERS...............................68
D57-SILICONE CARBIDE WHEEL...........................64 E4P-REPLACEMENT PUNCH FOR E4.....................68
D57A-SILICONE CARBIDE WHEEL ONLY............64 E5-WHOLE SPRING REMOVING PLIERS.............68
D57B-ARBOR.................................................................64 E6-HOSE CONNECTION FEMALE.........................159
D60-NORTON SPRINGS............................................131 E7AL/AR/BL/BR-TAPERED SPINDLES...................91
D60B-NORTON SPRING BUSHINGS......................131 E8-ALTO SAX NECK HOLDER.................................67
D61A/B-BLUED NEEDLE SPRINGS........................131 E8A-TENOR SAX NECK HOLDER...........................67
D61C/D/E-BLUED NEEDLE SPRING ASSTS.........131 E9-LARGE FLUTE PAD IRONING TOOL...............68
D61W-WOOD BLOCK................................................131 E10-FLUTE KEY LEVELING TOOL.........................68
D62-BERYLLIUM COPPER SPRINGS....................132 E11-FLUTE PAD LEVELING TOOLS (3).................71
D63-BLUED STEEL SPRINGS..................................132 E12-BRASS JAW PLIERS............................................90
D70-FLAT CLARINET SPRINGS.............................132 E13-ACCORDION PLIERS, 3 WAY.........................137
D70A-ASST OF 100 FLAT CLARINET SPRINGS....132 E14-FLUTE BOOSTER PLIERS.................................70
D70B-ASST OF 500 FLAT SPRINGS........................132 E15A/B/C/D-SWEDGING PLIERS..............................64
D70C-ASST OF 350 FLAT SPRINGS........................132 E16A/C-CRACK PINNING WIRE..............................69
D70VS-SMALL VIALS FOR FLAT SPRIGNS........132 E17-VALVE MIRROR..........................................38, 143
D70VL-LARGE VIALS FOR FLAT SPRINGS........132 E18-SWISS PATTERN FILE SET (12).......................76
D70W-WOOD BLOCK................................................132 E19-FILE, 8” ROUND STRAIGHT “O” CUT..........181
D71-FLAT SPRINGS FOR SAX.................................132 E20-FILE, 10” ROUND SMOOTH............................181
D71A-100 FLAT SAX SPRING ASST........................132 E21-FILE, 10” FLAT BASTARD CUT......................181
D72-FLUTE/PICCOLO SPRING WIRE...................132 E22-FILE, 8” WARDING, SECOND CUT................181
D73A/B/C/D-PHOSPHOR BRONZE FLAT E23-FILE, 10” FLAT, SMOOTH CUT......................181
SPRINGS.......................................................................130 E24-FILE, 8” CANTSAW, SINGLE CUT.................181
D73E/F-PHOSPHOR BRONZE FLAT SPRING E25-FILE, 10” PILLAR, SMOOTH CUT..................181
ASSTS............................................................................130 E26-FILE, 6” DBL SLIM TAPER, 3 CORNER........181
D73W-WOOD BLOCK................................................130 E28A-FILE, 1/16” CYLINDRICAL HINGE
D74-FLUTE/PICCOLO SPRING WIRE PHOSPHOR/ TUBING.........................................................................181
BRONZE........................................................................132 E28B-FILE, 3/32” CYLINDRICAL HINGE
D80A/B-STAINLESS STEEL ROUND SPRINGS....131 TUBING.........................................................................181
D80C/D/E-STAINLESS STL RND SPRG ASSTS....131 E29-TONE HOLE FILE, 1/8” THK, 1-1/2” WIDE, 5”
D80VS-SMALL VIALS FOR ROUND SPRINGS....131 LONG...............................................................................76
D80VL-LG VIALS FOR ROUND SPRINGS............131 E29A-TONE HOLE FILE, NARROW, 3/16” THK,
D80W-WOOD BLOCK................................................131 29/32” WIDE, 8”LONG.................................................76
D100/101/102-DRILL SETS...........................................89 E29B-TONE HOLE FILE, 1/8” THK, 1-1/4” WIDE, 5”
D103/104-DRILL GAUGES...........................................89 LONG...............................................................................76
D108/108A-TAP WRENCHES....................................179 E30-COMBINATION FILE CLEANER....................181
D109/109A-DIE STOCKS............................................179 E31-BORING BAR, NEW MODEL.............................78
D110A/B-SCREW EXTRACTORS............................174 E31A-REPLACEMENT CUTTER...............................78
D113A-CONCAVE PEARL FINGER BUTTONS....102 E32A-#1 MORSE TAPER WIDE ANGLE WOOWDIND
D113B-CONVEX PEARL FINGER BUTTONS.......102 LIVE CENTER.................................................................91
D116A/B-PEARL HOLDERS.....................................102 E32B-#2 MORSE TAPER WIDE ANGLE
D118-DRILLS NO. 61 THRU 80...................................89 WOODWIND LIVE CENTER........................................91
D120A/B-METRIC TAP & DIE SETS.......................179
210
 Index by item number

INDEX BY ITEM NUMBER

~E cont.~ ~E cont.~
E33-CLARINET PAD LEVELING TOOL.........71, 113 E97D4/D8-1 THRU 5-DIAMOND DISCS....................77
E34-FLUTE PAD IRONING TOOL............................71 E97F-1 THRU 5-INDV ROTARY FILES....................77
E35B/C-QUICK DETACHABLE HOSE STEMS....159 E97P-1 THRU 9-INDV PILOTS...................................77
E36-FLUTE GROMMET & BOOSTER REMOVER E97R-1 THRU 5-BRASS ROUNDS..............................77
PLIERS............................................................................70 E97W-UNIVERSAL WRENCH...................................77
E38-TRIANGULAR SOLDER SCRAPER, SOLID E98-FLUTE TONE HOLE LEVELING TOOL.........77
STRAIGHT EDGE.......................................................163 E99-ELDRED “WIDGET”............................................90
E40-TRIANGULAR SOLDER SCRAPER, STRAIGHT E99A-SPECIAL ADJ “WIDGET”................................90
EDGES.....................................................163 E100-FLUTE KEY ARM BENDING SET...................72
E41-FLAT SPRING HOLE PUNCH............................71 E197-PAD SEAT REAMER (3)..................................100
E42-SAX PAD SLICKS (9)............................................73 E198-LARGE PAD SEAT REAMER (2)...................100
E45A-SPRING CLIP-SMALL....................................167 EB3-ERICK BRAND REPAIR MANUAL..................57
E45B-SPRING CLIP-LARGE.....................................167 ERV-STRING REP BOOK FOR THE BAND INST
E46-VERNIER GAUGE..............................................174 REPAIRMAN...................................................................58
E47-PIVOT SCREW REAMERS (3)...........................78 ~F~
E47H-PIVOT SCREW REAMES W/HANDLES.......78 F1-RECOILING AIR HOSE.......................................159
E48-1/2” AIR VALVE..................................................159 F2-DELUXE DOUBLE END SPRING HOOK...........70
E49-SOLDER TWEEZER 6”......................................175 F3-ADJ OBOE OCTAVE INSERT REMOVER........71
E50-SLIDE LOCK TWEEZER 6-1/2”.......................175 F4-SILVO 8 OZ CAN...................................................156
E51-MED SHARP POINT TWEEZER 4-1/2”..........175 F5-SM RAWHIDE MALLET.......................................37
E52-EXTRA LONG CRVD PNT TWEEZER 6-1/2”...175 F5A-MED RAWHIDE MALLET.................................37
E53-OCVTAVE TUBE REMOVER FOR CL.............71 F5B-JUMBO RAWHIDE MALLET............................37
E54-OCTAVE TUBE REMOVER FOR OBOE..........71 F6-UTILITY BENCH HAMMER, 2 OZ HEAD.......130
E55-THUMB TUBE REMOVER..................................90 F7A-BRASSO, 8 OZ CAN...........................................156
E56-WAX ACCORDIAN SPOON..............................137 F7B-BRASSO, 1 GAL CAN.........................................156
E57A-POST BODY LOCK COUNTERSINK, SM.....62 F8-NATIONAL TORCH.............................................165
E57B-POST BODY LOCK COUNTERSINK, LG.....62 F8A-SM GAS AND AIR TIP FOR F8........................165
E58A-SAX KEY SWEDGING DIE-SM.......................90 F8B-LG GAS AND AIR TIP FOR F8........................165
E58B-SAX KEY SWEDGING DIE-REG....................90 F8C-OXYGEN TIP FOR F8........................................165
E59-PEARL PROTECTOR.........................................102 F9-BRASS HEAD HAMMER.......................................44
E60-CRACK SLICK SPATULA...................................88 F10S-DENT HAMMERS (5).........................................12
E61-FLUTE GAUGE.............................................62, 112 F10H-DENT HAMMER HANDLE..............................12
E62-80 GRIT BANDSANDER BELTS......................144 F11-CANVAS HAMMER..............................................44
E63-120 GRIT BANDSANDER BELTS....................144 F11A-CANVAS HAMMER, 1-14”................................44
E64-150 GRIT BANDSANDER BELTS....................144 F12-CORK STRIPPER................................................142
E65-240 GRIT BANDSANDER BELTS....................144 F13-CURVED SOLDER SCRAPER-NARROW......163
E66-320 GRIT BANDSANDER BELTS....................144 F14-CURVED SOLDER SCRAPER-MEDIUM.......163
E67-POST LOCK SCREW COUNTERSINK.............62 F15-CURVED SOLDER SCRAPER-LARGE...........163
E68-POST COUNTERSINK 5.8MM............................62 F16-1/2” ROUND SCRAPER W/HANDLE...............163
E69-POST COUNTERSINK 6.5MM............................62 F17-ACCORDION TREBLE ADJ TOOLS (2).........137
E70-CORK PROTECTOR..........................................142 F20-KEY PIN REMOVING TOOL............................111
E71-NEW STYLE-CLAMP-WOOD DELUXE.........104 F20A-BRASS ANVIL (SHORT OR TALL)..............111
E74-COMBINATION SCRWDRVR/FL CLN ROD....62 F20P-PUNCH (POINTED,FLAT OR HOLLOW)....111
E81-TONE HOLE PAD SEAT FILE 1/4”.................100 F20LB-LEAD ANVIL..................................................111
E82-TONE HOLE PAD SEAT FILE 1/2”.................100 F21A/B-SHORT/LONG PINNING NEEDLES............111
E83-TONE HOLE PAD SEAT FILE 5/8”.................100 F24-ACCORDION STRAP HOLE PUNCH..............185
E84-TONE HOLE PAD SEAT FILE 3/4”.................100 F26-ALUMINUM HAND VISE..................................173
E85-TONE HOLE PAD SEAT FILE 1”....................100 F27-SAX KEY BENDING LEVERS (7).......................72
E87A/B/C-MINI TONE HOLE FILES........................76 F28-CLARINET MOUTHPIECE MANDREL...........70
E89-6” END CUT NIPPERS.......................................108 F28A-BASS/ALTO CL MOUTHPIECE MANDRL....70
E90-CORNET/TRPT TUNDING SL PLIERS............11 F30-1/4” HOSE, 2” OD................................................159
E92-BARITONE TUNING SLIDE PLIERS................11 F31A-SILVER SOLDER, .5 OZ..................................164
E94-SOUSAPHONE TUNING SLIDE PLIERS.........11 F31B-SILVER SOLDER, 1 OZ...................................164
E97-4-REFACING TOOL, 400 GRIT DIAMOND.....77 F32-SPARK LIGHTER...............................................163
E97-8-REFACING TOOL, 800 GRIT DIAMOND.....77 F32A-EXTRA FLINTS (5)...........................................163
211
 Index by item number
INDEX BY ITEM NUMBER

~F cont.~ ~F cont.~
F33-HI HEAT TORCH................................................165 F95-RIBBON SOLDER, FLAT THIN 60/40.............166
F33A-OXYGEN TIP.....................................................165 F96-T15-T15 X 80MM TORX DRIVER......................90
F33B/C-REPLACEMENT TIPS.................................165 F97-DUCK BILL PLIERS...........................................109
F35-SMALL SPRAY GUN..........................................160 F97A-THIN TIP DUCK BILL PLIERS.....................109
F36-6 OZ CUP ATTACHMENT FOR SM GUN......160 F98-NUT DRIVER, 3/32”............................................102
F37-6 OZ CUP FOR SM GUN....................................160 F99-NUT DRIVER, 1/8”..............................................102
F38-LARGE SPRAY GUN..........................................160 ~G~
F39-LARGE GUN CUP ATTACHMENT.................160 G2C-ECONOMY BUNSEN BURNER (PROPANE)....94
F40-EXTRA CUP FOR LARGE FUN........................160 G2N-ECONOMY BUNSEN BURNER (NATURAL)....94
F41-SILVER SOLDER FLUX-.5 LB..........................164 G3A/C-STORAGE BOXES, PLASTIC......................172
F42-SOFT SOLDER SPOOL......................................166 G5A/B-4” DIAL CALIPERS...........................51, 64, 175
F43-DUSTING GUN.....................................................160 G7-MAGNETIC SCRIBER W/CARBIDE POINT.....13
F43A-COUPLING FOR DUSTING GUN..................160 G7A-EXTRA POINT FOR G7......................................13
F44-LEAD FREE SOLDER .062” 1 LB.....................166 G8-CALIPER, MM & .001 INCHES............................50
F45-SOFT SOLDER, 60-40, .062” OD.......................166 G11-THREAD GAUGE, METRIC.............................179
F46A/B-SOFT SOLDER FLUX..................................166 G12-SPRING DIVIDERS, 4”......................................175
F47/F48-HEAVY DUTY SLIP JOINT PLIERS........107 G13-OUTSIDE CALIPERS, 4”...................................175
F49-TIX ANTI-FLUX..................................................166 G14-INSIDE CALIPERS, 4”.......................................175
F50-SLIDE REMOVAL PLIERS.................................34 G15-SCREW PITCH THREAD GAUGE..................179
F51-CURVED NOSE PLIERS....................................107 G16/16A-CENTER PUNCHES.....................................93
F52-ROUND NOSE PLIERS, 4-1/2”............................69 G17/17A-DRIVE TAPER PUNCHES..........................93
F54A/B-CHAIN NOSE PLIERS, 5”...........................109 G18-AUTOMATIC CENTER PUNCH........................93
F55A/B-CHAIN NOSE PLIERS, 6”...........................109 G18A-EXTRA POINTS FOR G18................................93
F56A/B-PARALLETL ACTION PLIERS, 6-1/2”.....107 G19-CLEAR MAGIC.....................................................75
F57-REGULAR MODE CUTTERS...........................108 G20-JET MAGIC...........................................................75
F58A-SMOOTH JAW PLIERS, 6-1/2”......................107 G21-SET OF 7 KEY LEVELING TOOLS..................72
F58B-SCORED JAW PLIERS, 6-1/2”........................107 G22-BLACK PIGMENT................................................75
F58C-SMOOTH JAW PLIERS, 5”, FLAT NOSE....107 G23-BENCH OILER......................................................82
F60-SWIVEL TOP SCREWDRIVER..........................66 G24A/B-DIAL CALIPERS..............................51, 64, 175
F60A-EXTRA BLADE, SHORT FOR F60..................66 G26/26S-FLUTE CLIPS.................................................85
F61A/B-PARALLEL ACTION PLIERS, 5”..............107 G30-SET OF 2 TROMBONE SL SPACING TLS.......55
F62-LONG FLAT NOSE PLIERS..............................109 G32A/B-ST OF 3 TRMBONE JOINT SPACERS.......18
F63-HEAVY DUTY SHOP SCISSORS......................108 G35-ST OF 3 TRMB CORK BARREL SPACERS.....18
F64-COMPOUND LEVERAGE TIN SNIPS.............108 G37A/B/C-RUBBER WEDGES....................................85
F65-HAND TUBING SHRINKER................................28 G38A/B-WOOD WEDGES............................................85
F66-SCREWDRIVER W/BLADE................................66 G39-VALVE GUIDE FITTING TOOL.......................38
F66A-BLADE FOR F66, 1-1/2” LNG W/.062” TIP....66 G39B-BRASS VALVE GUIDES...................................38
F66S-SET SCREW FOR SCREWDRIVERS..............66 G40-SLIDE SOLDER ROD...........................................53
F66W-SM ALLEN WRENCH FOR F66S...................66 G41A/B-TROMBONE BUMPER REMOVERS.........18
F67-SCREWDRIVER W/BLADE................................66 G42-ADJ SCREW DRILLING JIG..............................83
F67A-BLADE FOR F67, 3” LONG W/.085” TIP........66 G42A-TEFLON BEADING...........................................83
F68-SCREWDRIVER W/BLADE................................66 G43-SOLDER JIG........................................................163
F68A-BLADE FOR F68, 6” LONG W/.125” TIP........66 G43CL/CR/CS-CLAMPS FOR G43...........................163
F69-COMBO SCREWDRIVER/SPRINGHOOK.......66 G44-SCREW SLOTTING TOOL.................................82
F70-SCREW HOLDING SCREWDRIVER................66 G44A-BLADE (FOR G44 MADE BEFORE 2003).....82
F70A-BLADE FOR F70.................................................66 G44B-BLADE (FOR G44 MADE AFTER 2003).........82
F72-SUPER SCREWDRIVER......................................66 G45A/B-TROMBONE CORK BARREL DENT
F74-SCREWDRIVER BLADE MAGNETIZER.........66 REMOVERS...................................................................34
F75-SAX BUMPER ADJUSTER..................................90 G50-BASSOON TENON TOOL...................................97
F76-MUSIC WIRE CUTTERS...................................108 G50RC-REPLACEMENT CUTTER FOR G50..........97
F77-0 THRU 5-POWERDRIVER SCRWDRIVERS....65 G50B/C-REPLCEMENT TENONS..............................97
F77S/SL-POWERDRIVER SETS.................................65 G51-BASSOON TENON TOOLS.................................97
F80-SWEDGING TOOL W/3 COLLETS....................69 G51A/C-TENON PLUGS...............................................97
F80B-BODY & KNOB ONLY FOR F80......................69 G52-BASSOON TENON TOOLS.................................97
F80C-106/149/187-COLLETS FOR F80......................69 G52A/C-TENON PLUGS...............................................97
212
 Index by item number

INDEX BY ITEM NUMBER

~G cont.~ ~G cont.~
G53-CLARINET TONE HOLE UNDERCUTTERS......79 G90R-RIGHT HAND TAPERED SPINDLE................146
G54-BASS CL TONE HOLE UNDERCUTTERS..........79 G90L-LEFT HAND TAPERED SPINDLE...................146
G54A/B-INDV HANDLES FOR G54.............................79 G91R-ALUMINUM BUSHING, RIGHT HAND.........148
G54C-INSERTION ROD FOR G54................................79 G91L-ALUMINUM BUSHING, LEFT HAND............148
G55-INSERTION ROD/ALTO CLARINET...................79 G93A/B-BEESWAX......................................................137
G56-BORE MEASURING TOOL.................................110 G97-STIFF FRACTION RULER, 6”.............................174
G60-ADJUSTABLE JEWELERS SAW FRAME.........181 G97M-METRIC RIGID RULER...................................174
G61-FLAKE SHELLAC..................................................88 G98-STIFF FRACTION RULER, 12”...........................174
G62-METAL BACK SAW............................................108 G99-FLEXIBLE COMBO RULER...............................174
G63-ADJUSTABLE HACKSAW FRAME...................108 G100-SET OF OBOE TONE HOLE CUTTERS...........101
G63A/B/C-BLADES FOR G63.....................................108 G104-BASS CLARINET TONE HOLE CUTTER.......103
G64-HAND DRILL........................................................107 G104P-PILOT FOR G104..............................................103
G65A/B-CLEAR STICK SHELLAC...............................88 G106-BELL TENON REAMER......................................97
G66-LOWER TENON PLUG HOLDER.........................97 G106C-BLADES FOR BELL TENON REAMER..........97
G67A/B-AMBER STICK SHELLAC..............................88 G107-CLARINET BARREL REAMER........................110
G68A/B-BLACK STICK SHELLAC..............................88 ~H~
G69A/B/C-FRENCH CEMENT......................................87 H1-ASSEMBLY GLOVES............................................148
G70-CLARINET BARREL CENTERING TOOL..........62 H3/H4-CYLINDRICAL SCRATCH BRUSHES..........151
G71B-BELL TENON SET FOR Bb CLARINET...........98 H5/H7-GOBLET SCRATCH BRUSHES......................151
G71C-CUTTER FOR G71B............................................98 H11/12/13/14-CRIMPED BRASS SCRATCH
G71E-BELL TENON SET FOR Eb CLARINET............98 BRUSHES......................................................................151
G71F-CUTTER FOR G71E.............................................98 H20-POST DRILLING JIG & ACCESSORIES..............82
G72A/B/C/D/E/F-REPAIR TENON...............................98 H20A/B/C/D-EXTRA DRILLS FOR H20......................82
G73A/B/C/D-LOWER JOINT REPL TENON................98 H21-BENCH DUSTER BRUSH....................................168
G74A/S-RAISED TONE HOLE JIGS...........................103 H22-LONG HANDLED PLATERS BRUSH................168
G74F-FLY CUTTER.....................................................103 H23-GLUE BRUSH.......................................................168
G75A/B/C/D/E/F/G/H-DELRIN, BLACK...................110 H24-KEY BRUSH.........................................................168
G76-SPECIAL OBOE ARBOR.......................................99 H25-CLARINET BORE CLEANING BRUSH.............170
G77-SPECIAL BASS CL ARBOR KIT..........................99 H26-SAX BORE CLEANING BRUSH.........................170
G78-CLARIENT SOCKET GRAFTING KIT.................99 H26A-BRUSH WITH EXTENSION HANDLE...........170
G78A/B-FLY CUTTERS ONLY.....................................99 H27-FOOT SWITCH.......................................................63
G78U-CONVERSION KIT..............................................99 H28A/B/C/D/E/G/F-ABS PLASTIC ROD, BLK.........110
G79A-WOOD GRAFT FOR G78....................................99 H29-WELD-ON #16 GLUE...........................................110
G79B-ABS GRAFT FOR G78.........................................99 H34-PEARL HOLDER CLOSING DIE........................102
G80-SET OF 6 ACCORDIAN BASS ADJ TOOLS......137 H35-JOINT BARREL RING SHRINKING DIE...........104
G81-SET OF 3 REED TESTING & TUNING TLS......137 H40-LEAD LADLE.........................................................17
G82-/82S-FLUTE PAD SEATING CLIPS......................85 H41/42/43/44-INTERNAL FERRULE BRUSHES.......164
G83-ADJUSTABLE SOCKET REAMER....................100 H45/46/47/48-EXTERNAL TUBE BRUSHES.............164
G83A/B-REPLACEMENT BLADES............................100 H53-ALCOHOL LAMP,CHROME, ADJ WICK............95
G83C-OVERSIZE BLADE & SLEEVE.......................100 H53A-WICK FOR H53....................................................95
G83S-1/G83S-2-SLEEVES............................................100 H55-HEAVY DUTY TUBING BENDING VISE...........32
G84-TENON SET (SM)...................................................98 H56-PIN VISE HOLDER..............................................137
G84A/B-INDVIDUAL CUTTERS..................................98 H58-SAX NECK SWEDGING TOOL............................80
G84BA/BB/BS-UNCUT PILOTS....................................98 H58A-COLLETS FOR SAX NECK SWEDG TL...........80
G84C-BASS CLARINET CUTTER................................98 H58FC-780/790-FLUTE COLLETS FOR H58...............80
G84D-BAR ONLY FROM G84 SET..............................98 H59-EXPANDER.............................................................80
G84F/T-INDIVIDUAL CUTTERS.................................98 H59A-TRIPLE KEY EXTRUDER..................................80
G85-OBOE MIDDLE JOINT TENON TOOL................97 H60-GOOSENECK EXPANDER...................................81
G86-CLARINET TONE HOLE CUTTERS..................101 H60H-T HANDLE FOR H60..........................................81
G87-TAPERED TONE HOLE CUTTERS (3)..............103 H61-GOOSENECK EXPANDER...................................81
G87A/B/C-TAPERED TONE HOLE CUTTER...........103 H61H-T HANDLE FOR H61..........................................81
G87P-BLANK PILOTS ONLY..............................101,103 H62-FLUTE JOINT EXPANDER...................................81
G88-MOUTHPIECE PULLER........................................25 H62H-T HANDLE FOR H62..........................................81
G88C-CRADLE REPLACEMENT FOR G88................25 H63-PICCOLO JOINT EXPANDER..............................81
G89-AUTO LOCKING LUG FOR G88..........................25
213
 Index by item number
INDEX BY ITEM NUMBER

~H cont.~ ~L cont.~
H64-PICCOLO HEAD SWEDGING DIE...................81 L3-TRUMPET/CORNET BELL IRON.......................31
H65-PICCOLO HEAD MANDREL.............................92 L4-BELL IRON UNIVERSAL......................................31
H66-PICCOLO BODY MANDREL.............................92 L5-FRENCH HORN/TRMBONE BELL IRON..........31
H68-FLUTE TENON SLEEVE...................................100 L6A/L6B-MORSE TAPERS..........................................90
H70-FERREE’S QUICK-DRY CEMENT...................87 L7-CHUCKS FOR MOTOR SPINDLE..........................63
H70S-SOLVENT FOR H70...........................................87 L8-BENCH MOTOR SPINDLE...................................63
H72-4 OZ CAN W/BRUSH IN TOP.............................87 L9-JACOBS 0-1/2” CHUCK.........................................63
H75-HOT STUFF GLUE & CHIP KIT.......................75 L10-BINDING WIRE...................................................167
H75A-1/2 OZ HOT STUFF GLUE...............................75 L11-PATCH MAKING TOOL-SMALL......................52
H75B-1/3 CUP GRENADILLA CHIPS........................75 L11A-PATCH MAKING TOOL-LARGER SIZE......52
H75C-HOT SHOT ACCELERATOR SPRAY............75 L12-HEAVY DUTY POST PUSHER/DENT
H75D-ULTRA SOLVENT.............................................75 PULLER..........................................................................23
H75E-EXTRA TUBING.................................................75 L13-TUNING SLIDE REMOVING TOOL.................55
H76-TAPERED GLUE PLUGS..................................105 L13A-HOOK FOR L13..................................................55
H77/H78-CRYSTOLON OILSTONE........................176 L13B-RAWHIDE STRIP FOR L13..............................55
H80/80A/81/81A-ABRASIVE TAPE & CORD.........176 L14-ORIGINAL V-BLOCK..................................29, 173
H83-WET & DRY PAPER SHEETS..........................176 L14A-V BLOCK W/LOCKING SCREWS..........29, 173
H90-PUMICE, 1 LB.......................................................12 L15A-INDIVIDUAL DRAWRINGS.............................37
H101/102/103-FABRICUT ROLL...............................176 L15AS-DRAWRINGS (29)............................................37
H101A/102A/103A-FABRICUT, 15” STRIPS...........176 L15B-INDIVIDUAL DRAWRINGS.............................37
H110/111/112/113/114/115-EMERY ROLL...............176 L15BS-DRAWRINGS (18).............................................37
H110A/111A/112A/113A/114A/115A-EM STRIPS....176 L16A-R-INDIVIDUAL DRAWRINGS........................35
H116/120/121/122/123-EMERY ROLL......................176 L16S-SET OF 16 DRAWRINGS...................................35
H125/126/127-REPLACEMENT DISKS....................144 L17-LG BURNISHING RING-CORNET/TRPT........35
H200-POLISHING WHEEL.......................................148 L18-LG BURNISHING RING-TROMBONE.............35
~J~ L19-HANDLE FOR L17, L18........................................35
J1-CLIP-ON MAGNIFIERS.......................................186 L20-LEVELING BLOCK/BENCH ANVIL...............109
J2-1/2 FRAME MAGNIFIERS...................................186 L22-LEAD JAWS (2)....................................................173
J8/J9-PRESSURE SENSITIVE TEFLON SHEETS...73 L24-LEAD BLOCK, 4” X 12”.......................................52
J11-PATCHING MATERIAL NICKEL/SILVER......52 L26-LEAD PIGS.............................................................52
J14A-J-ROUND SOLID BRASS ROD.......................107 L28A-F-FLUSH BAND DIES......................................106
J14K/J14L-SQUARE SOLID BRASS ROD..............107 L29-4 FLUSH BAND DIES FOR OBOE......................106
J15/J16-PATCHING BRASS.........................................52 L30-FLUSH BAND FOR CLARINET..........................106
J17-PATCHING BRASS ASST.....................................52 L30A-FLUSH BAND FOR CL 1.185” X .240”............106
J20SS-ROUND NOSE PLIER...............................38, 105 L30B-FLUSH BAND FOR CL 1.185” X .316”............106
J21SS-CHAIN NOSE SWEDISH TYPE L31-FLUSH BAND FOR ALTO CLARINET..............106
PLIER......................................................................38, 105 L32-FLUSH BAND FOR BASS CLARIENT...............106
J22SS-SMALL DUCK BILL PLIER....................38, 105 L33/A-FLUSH BAND FOR OBOE...............................106
J26-LAMP W/MAGNIFIER AND SHADE...............169 L34-OBOE BELL RING DIE, PLUNGER....................106
J31-WENOL POLISH....................................................155 L36-ASST OF SHIM STOCK.......................................106
J34-RED BEAR POLISH............................................156 L37-MORGAN REFACING KIT........................105,185
J45/J48-MILLBOARD.................................................167 L38-VACUUM VISE.....................................................173
J60-LOW MELTING SILVER SOLDER KIT.........164 L40-BENCH VISE W/4” JAW......................................173
J61-LOW MELTING SILVER SOLDER ONLY.....164 L41-HEAVY DUTY VISE STAND..............................173
J62-FLUX ONLY FOR J61.........................................164 L42-DENT ROD HOLDING VISE.................................25
J85-RUST INHIBITOR, SPRAY CAN......................154 L50-WOODWIND REPAIR HOLDER...........................70
J88A/J88B-CORROSION CRACKER OIL..........11, 94 L50B-BASE ONLY FOR W/W REP. HOLDER............70
J90/91/92/93/94-ASSEMBLY BOARDS.....................106 L50P-1-5-TAPERED PLUGS..........................................70
J96-SAX BODY WHEEL..............................................83 L50S-1-3-SHAFTS...........................................................70
J99-HI-HEAT BLOW GUN..........................................86 L50T-”T” LEAK LIGHT ADAPTOR.............................70
L53-EXCALIBER SOLDERING KIT...........................162
~L~ L54-TORCH KIT...........................................................162
L1-BERNZ-O-MATIC BRAZING TORCH KIT.....162 L54-1-TIP FOR L54 TORCH........................................162
L2-BERNZ-O-MATIC PROPANE TORCH.............165 L56-BLAZER TORCH....................................................95
L2A-REFILL TANK....................................................165 L57-BUTANE REFILL....................................................95
214
 Index by item number

INDEX BY ITEM NUMBER

~L cont.~ ~N cont.~
L58-LAPPING COMPOUND 4 OZ................................12 N16A/B/C-SAX DENT TOOLS......................................57
L60-MICRO TORCH.......................................................95 N17-BASSOON BOCAL CABLE.................................104
L61-REFILLABLE CARTRIDGE (2).............................95 N19-SOLDERING CLAMP...........................................167
L62-PORTABLE BUTANE BUNSEN............................95 N20-24-VALVE LAPPING BLOCKS.............................12
L63-PENCIL TORCH....................................................162 N28A/C/D-GROUND VALVE SLEEVES......................45
L65-ECONOMY BUTANE BUNSEN BURNER...........95 N29S-DENT BALLS (6)..................................................22
L71-CONCENTRATED STERISOL 2OZ....................171 N29A-F-INDIVIDUAL DENT BALLS..........................22
L72-CONCENTRATED STERISOL 8OZ....................171 N30-SOUSAPHONE BELL JACK..................................27
L73-SANIMIST 2OZ.....................................................171 N31/A/B-DENT RODS....................................................27
L74-SANIMIST 8OZ.....................................................171 N32-DENT ROD..............................................................27
L100-GLUE GUN KIT COMPLETE..............................88 N33-DENT ROD..............................................................27
L104-6 CLEAR, 4” GLUE STICKS................................88 N34-DENT ROD..............................................................27
L105-6 WHITE, 4” GLUE STICKS................................88 N35/36/37-RIGHT ANGLE EXPANDERS.....................26
L106-24 CLEAR, 4” GLUE STICKS..............................88 N40/42/44/46-EXPANDABLE SL DENT TOOLS.........25
L107-24 WHITE, 4” GLUE STICKS..............................88 N47-BELL STEM MANDREL........................................32
~M~ N48A/48B-VENTURI RODS..........................................22
M19-FISH SKIN............................................................102 N49-TRUMPET MOUTHPIPE DENT ROD...................24
M49-BASSOON BELL RING-STANDARD..................79 N50/50A/50B-DRILL ROD.............................................74
M49A-BASSOON BELL RING-CUSTOM MADE.......79 N51A/B/C/S-MOUTHPIECE ARBORS.........................18
M56-BASSOON BODY LOCK....................................168 N52A-C-METRIC SLIDE MANDRELS.........................49
M56A-REPLACEMENT PIN AND SPRING...............168 N53A-S-SLIDE MANDRELS FOR TROMBONE.........49
M57-BASSOON CRUTCH ASSEMBLY.....................168 N53D-E-MESH SLEEVES..............................................49
M57A-BASSOON CRUTCH ONLY............................168 N54A-S-KNUCKLE DENT TOOLS (5).........................29
M57B-BASSOON HOLDER ONLY.............................168 N55A-S-KNUCKLE DENT TOOLS (5).........................29
M70A-SELMER RUBBER TIP.....................................185 N56-MOUTHPIPE CABLE KIT......................................24
M70B-LEBLANC RUBBER TIP..................................185 N56A/B-EXTENSIONS FOR N56..................................24
M70C-SELMER ROD HOLDER..................................185 N57AG/N57AGH-INDIVIDUAL DENT BALLS..........13
M70D-LEBLANC ROD HOLDER...............................185 N57C-CASE ONLY FOR N57 BALLS...........................13
M70E-SELMER WING SCREW..................................185 N57CD-DOUBLE CASE ONLY FOR N57 BALLS......13
M70F-LEBLANC WING SCREW................................185 N57D-SET OF 5 DRIVERS.............................................13
M70G-SELMER KNURLED NUT...............................185 N57G-101 DENT BALLS, 5 DRIVERS..........................13
M70H-LEBLANC WING NUT.....................................185 N57GH-101 DENT BALLS, 1/2 SIZES..........................13
M70J-SELMER FLOOR PEG ONLY...........................185 N57GL-BALLS, 25 SIZES..............................................13
M70K-LEBLANC FLOOR PEG ONLY.......................185 N57X-SET OF 4 BARREL DENT BALLS.....................13
M70L-LEBLANC FLOOR PEG COMPL.....................185 N58A/C/D-GROUND CASING MANDRELS..............45
M70S-SELMER FLOOR PEG COMPL........................185 N59-PENCIL MAGNET..................................................13
M71-CLARINET THUMB REST W/SCREWS...........171 N60-SAX POST RAISING TOOL...................................55
ML170-CLARINET/OBOE THUMB REST.................171 N60A-ASSORTED SAX POSTS.....................................55
N60B-SAX POST RAISING TOOL-BARI.....................55
~N~ N61-SAX BODY STRAIGHTENING TOOL.................56
N1-6” BURNISHER.........................................................30 N62A/AS-20 DRILLED DENT BALLS..........................15
N2-8” BURNISHER.........................................................30 N62B/BS-DRILLED DENT BALLS IN 1/2 SIZES........15
N2A-WOOD HANDLES TO FIT N2,3,5,6,7..................30 N63A/AS-INDIVIDUAL DENT BALLS........................15
N3-10” LONG STRAIGHT BURNISHER..................30 N63B/BS-DRILLED DENT BALLS IN 1/2 SIZES........15
N4-YAMAHA TUNING SLIDE DENT KIT..................58 N64A/AS-DRILLED DENT BALLS...............................15
N5/6/7-EXTRA LNG R ANGLE EXPANDERS.............26 N64B/BS-INDIVIDUAL DRILLED DENT BALLS......15
N8/9-DOUBLE END BURNISHERS..............................30 N65A/S-LG BARREL SHAPED DENT BALLS............13
N10-EXPANDABLE TRMB DENT REMOVER...........50 N66A/B/C-MOUTHPIECE REC REAMERS.................36
N11-EXPANDABLE TRMB DENT REMOVER...........50 N67-DENT ROD FOR BASS/BARI................................27
N11A-EXPANDABLE BASS TRMB DENT REMVR..50 N68-RIGHT ANGLE MANDREL...................................38
N12-BURNISHING RING...............................................49 N69-CURVED ROD, BASS/BARITONE.......................27
N13-BELL MOUNTING JIG-CORNET/TRPT............167 N70-CURVED ROD, FRENCH HORN..........................28
N14A/B/C-MANDRELS..................................................36 N71-”S” CURVED ROD-FRENCH HORN....................28
N15-MTHPIECE SHANK STRAIGHTENING TL........18 N72-BODY BOW DENT REMOVER............................56
N16S-SET OF SAX DENT TOOLS (3)...........................57 N73-GOOSENECK DENT ROD.....................................56
215
 Index by item number
INDEX BY ITEM NUMBER

~N cont.~ ~O cont.~
N74-STRAIGHT ROD.....................................................27 O19-BASSOON SWABS...............................................170
N75-FLUTE HEAD MANDREL.....................................92 O20-CHAMOIS CLARINET SWAB............................170
N75A-ALTO FLUTE HEAD MANDREL......................92 O21-MOUTHPIECE BRUSH FOR REED INST..........168
N76-FLUTE BODY MANDREL.....................................92 O22-MOUTHPIECE BRUSH FOR BRASS INST.......168
N76A-ALTO FLUTE BODY MANDREL, .937.............92 O23-VALVE BRUSH FOR BRASS INST....................168
N76B-ALTO FLUTE BODY MANDREL, .984.............92 O24-ALTO CLARINET SWAB....................................170
N77A-F-FLUTE HEAD SWEDGING DIE.....................81 O25-BASS CLARINET SWAB.....................................170
N78-FLUTE PAD CUP TOOL......................................105 O26-SOUSAPHONE GRILL.........................................171
N79-FLUTE PAD HOLE PUNCH SET..........................93 O27-SOUSAPHONE HOLDER....................................171
N79P-PUNCH ONLY.....................................................93 O28-ADJUSTABLE FR HORN HOLDING JIG............53
N79Y-YAMAHA PUNCH ONLY...................................93 O28U-UPDATE FOR O28...............................................53
N80A/AS/B/BS/C/CS/D/DS/E/ES-DENT BALLS.........14 O29-ADJ VALVE INST HOLDING JIG........................53
N80F/FS/G/GS-UNDRILLED DENT BALLS...............35 O30-CELLO SET...........................................................186
N81A/N81B/N81S-SAX DENT BALLS.........................57 O33-SAX STRAP, BLK, ALTO/TENOR.....................185
N82-DENT BALL HOLDER...........................................14 O34-CLARINET STRAP, BLK, ALTO/BASS.............185
N83A/B/C/D/S-ROLLER DENT BALLS.......................22 O36-SAX STRAP, BLACK...........................................185
N84H-MOUNTING PLATE FOR N84S.........................14 O38-OCTAVE KEY LEVER TUBING...........................73
N84S-DENT BALLS, SET OF 6.....................................14 O41-O45-HEAT SHRINK TUBING...............................73
N85-SAX BODY DENT REMOVER..............................58 O50-54-FLEXIBLE VINYL TUBING, CLEAR.............73
N86-TRPT MOUTHPIPE DENT ROLLER KIT.............24 O60/O61-FLEXIBLE VINYL TUBING.......................177
N87A-TROMBONE SLIDE DENT ROLLER................49 O70A-D/O70S-WOOD ASSEMBLY MANDRELS.......53
N87U-UPGRADE N87 TO N87A...................................49 ~P~
N88-SOUSA DENT ROD , SHORT................................27 P1-PRECISION FLUTE ROLLER..................................92
N89A/N89B-ROD THREAD ADAPTORS.....................15 P2/3/4/5/6/7-DOUBLE HANDLE ROLLERS.................23
N90-UNIVERSAL TAPERED MANDREL....................32 P8/9/10-CONE SHAPED ROLLERS..............................23
N91A-J/N91S-TAPERED MANDRELS.........................33 P11-7” ROLLER..............................................................23
N93-SAX BODY MANDREL.........................................56 P12-12” ROLLER............................................................23
N94-UNIVERSAL TAPERED MANDREL....................32 P14/15/16-CONTOURED BELL ROLLERS..................23
N95/N95B/N96-DENT REMOVING RINGS.................34 P18/19/20-MICROMETERS..........................................175
N97-COMPACT BENCH MOTOR.................................63 P24-TELESCOPING GAUGES.....................................174
N98-VALVE LAPPING MOTOR...................................12 P28-2-1/2” CUTTING PAD.............................................93
N99A/N99B-BENCH MOTORS.....................................63 P30-CORK PAD CUTTERS 6 THRU 16........................93
N100-ALUMINUM HAND BRAKE...............................63 P32-OBOE CORK PAD HOLE CUTTER....................142
N105/N106/N107-HOOK BURNISHERS.......................30 P40/41/42-HANGERS....................................................186
N115-CLARINET BODY CENTERING CLAMP..........94 P50-TRUMPET DENT BALL DRIVER.........................21
N124A-D/N124S-FRENCH HORN DENT RODS.........28 P50A-REPLACEMENT CABLE.....................................21
N130-SANDING RODS (3).............................................64 P50B-POLY VINYL SLEEVE........................................21
N131-N140-ADJUSTABLE REAMERS.........................36 P51-TUBA MOUTHPIPE DENT BALL DRIVER.........20
N131A-N140A-REPLACEMENT BLADES...................36 P52-CYLINDRICAL TUBING SL DENT BALL
~O~ HAMMER........................................................................21
O4-WOOD LACQUER MANDREL.............................154 P52A-REPLACEMENT CABLE.....................................21
O5-WOOD LACQUER MANDREL FOR TRMB........154 P53-TROMBONE DENT BALL RETRIEVER..............19
O6-600 TUBING CLEANER BALLS...........................157 P53A-REPLACEMENT CABLE.....................................19
O7A-FRENCH HORN CLEANER................................170 P54-TROMBONE HAMMER.........................................20
O7B-BASSOON BOCAL CLEANER...........................170 P54A-REPLACEMENT CABLE.....................................20
O8-FRENCH HORN HOLDER.......................................26 P55-CORNET/TRPT TUNING SL DENT BALL
O9A/O9B-WIRE BRUSHES.........................................170 HAMMER........................................................................20
O10-CORNET/TRUMPET POLISHING JIG.................53 P55A-REPLACEMENT CABLE.....................................20
O11/O12-FILE HANDLES............................................181 P56-FRENCH HORN BELL DRIVER............................19
O14-CLARINET SWAB................................................170 P56A-HANDLE W/2 STROKE CABLES & BRASS
O15-FLUTE SWAB.......................................................170 BALLS..............................................................................19
O16-PICCOLO SWAB..................................................170 P56B-H-BALL SEGMENTS...........................................19
O17-OBOE DOUBLE END WOOL SWAB.................170 P56J-REPLACEMENT CABLE.....................................19
O18-OBOE SWABS......................................................170 P56K-EXTENSION HANDLE........................................19

216
 Index by item number

INDEX BY ITEM NUMBER

~P cont.~ ~Q cont.~
P56-LG-LARGE STROKE CABLE................................19 Q65-1-LEAK LIGHT TESTING KIT..............................84
P56-SM-SMALL STROKE CABLE...............................19 Q65-2-LEAK LIGHT TESTING KIT (220 VOLT)........84
P56U-UPDATE FOR P56U.............................................19 Q65A-TRANSFORMER..................................................84
P57-FR HORN HOOK-BACK DRIV/RETR..................19 Q70A/B-SMALL BULBS................................................84
P57A-HANDLE ONLY FOR P57...................................19 Q71A/B-LARGE BULBS................................................84
P58-SAX NECK DRIVER/RETRIEVER........................20 Q75-PICCOLO LEAK LIGHT........................................83
P58B-SET OF BALLS FOR P58 (6)...............................20 Q75-6-6” BULB ONLY...................................................83
P60-ROTARY VALVE BEARING TOOL.....................51 Q80-FLOURESCENT LEAK LIGHT.............................84
P60B-BODY & HANDLE ONLY FOR P60..............51,69 Q80-2-FLOURESCENT LEAK LIGHT (220 VOLT)....84
P60C-0-3-INDIVIDUAL COLLETS...............................51 Q82-CONTROL BOX ONLY..........................................84
P60C-5-7-INDIVIDUAL COLLETS..........................51,69 Q82-2-CONTROL BOX ONLY (220 VOLT).................84
P60W-SWEDGING TOOL FOR W/W’S........................69 Q83-6” TUBE WITH CORK AND PLUG......................84
P61-ROTAR BEARING PLATE EXPANDER..........51,58 Q85-12” TUBE WITH CORD AND PLUG....................84
P71-CORNET/TRPT BELL MANDREL........................31 Q87-6” FLOURESCENT TUBE......................................84
P72-TROMBONE BELL MANDREL............................31 Q89-12” FLOURESCENT TUBE FOR Q80/85..............84
P80-ROCKET ROLLER..................................................51 Q94/Q95-SNEAKY LIGHTS..........................................83
P81-INDIVIDUAL BALLS.............................................15 ~R~
P81S-SET OF 9 STEEL DENT BALLS..........................15 R1-BUFF, RAZOR EDGE 4”........................................147
P82A-F/P82S-TUBA DENT BALLS..............................16 R2/R3-BUFFS, TAPERED BELL.................................147
P82S-ALL 73 TUBA DENT BALLS..............................16 R6-BUFF, LEATHER CENTER, 6”..............................147
P83S-ROD TAYLOR CABLE SET.................................17 R7-BUFF, SOFT FLANNEL, 8”...................................147
P83-6/7/8/9-CABLES.......................................................17 R8A/R8B-BUFFS, LOOSE MUSLIN...........................147
P83R-CABLE END BALL..............................................17 R9-BUFF, MUSLIN SPIRAL STITCHED....................147
P84-TUBA CABLE SYSTEM.........................................17 R10-BUFFS FOR Z35 STITCHED, 2”..........................150
P86-PRITCHARD CABLE SYSTEM.............................15 R12-BUFFS, FLANNEL, 10”........................................147
P88L/M/S-TUBING TRUE TOOLS...............................48 R18-BUFF, MUSLIN, 11”.............................................147
P89-TROMBONE SLIDE PLATE..................................50 R22-REVERSIBLE BUFFING GLOVES, COTTON...148
P90-TROMBONE SLIDE STONE COMPLETE............48 R25/26/27/28-RAGGING TAPE...................................148
P90B-STEEL BAR (SET OF 2).......................................48 R30-ULTRA THIN RRAGGING TAPE.......................148
P90M-MAGNETS ONLY (SOLD BY THE EA)............48 R45A/B-EMERY CAKE, BLACK...............................149
P90S-STONE ONLY.......................................................48 R46A/B-TRIPOLI CAKE, ORANGE............................149
P91-STAND FOR P90.....................................................48 R47A/B-NUWHITE CAKE, OFF WHITE....................149
P100A-VALVE THREAD MANDRELS........................39 R48A/B-RED ROUGE...................................................149
P100S-SET OF 10 VALVE THREAD MANDLRES.....39 R49-CLARINET KEY BUFFING COMPOUND.........149
P101/P102-THREAD RESTORING TOOLS..................52 R50-TESTING CORKS (5)..............................................83
PT-5/6/7-POWER TONE FLUTE PLUGS....................189 R70-CORK GREASE.....................................................139
~Q~ R71-CORK GREASE, 1 LB..........................................139
Q1-NICKOLAS CLEAR SPRAY LACQUER..............159 R75-SAX NECK CLEANER.........................................170
Q1G-NICKOLAS GOLD SPRAY LACQUER.............159 R76/76A-PAD AND CORK CEMENT...........................87
Q10B/Q10S-LYRES, TRPT/CORNET.........................184 R80-DBL BUFF RAKE COMPL W/HOLDER............148
Q11-LYRE, BARI/TUBA/SOUSA/EXTRA LONG.....184 R82-REPLACEMENT RAKE.......................................148
Q12A/Q12B-LYRES, TROMBONE.............................184 R88-WOOD FILING BLOCK.......................................181
Q13A/Q13B-LYRES, ADJUSTABLE TROMBONE...184 R95-FLAKE GLUE, 1 LB BAG......................................87
Q14-LYRE, SAXOPHONE...........................................184 R96-ELECTRIC GLUE POT, 1 QT SIZE.......................87
Q15M-LYRE, CL MIDDLE JOINT WITH RING........184 REP-FERREE’S REPAIR MANUAL.............................57
Q16M-LYRE, CL MIDDLE JOINT, RING ONLY......184 RU1-USED BUFFS........................................................148
Q16S-LYRE, CLARINET RING SCREWS ONLY......184 ~S~
Q17-LYRE, Bb FOR METAL CLARINET...................184 S2B-LYRE SOCKET, SOLDER ON, BRASS..............172
Q19-LYRE, WRIST FOR FLUTE & PICCOLO...........184 S3BA/BM-MOUTHPIECE TUNING BIT, BRASS......177
Q21A-LYRE, ALTO CLARINET W/SOCKET............184 S3BT-MOUTHPIECE ADAPTOR, TRPT/CORNET...177
Q21B-LYRE, BASS CLARINET W/SOCKET.............184 S3BTB-TROMBONE TO BASS TRMB ADAPTOR...177
Q22-LYRE, BASSOON WITH SOCKET.....................184 S3SA/SM-MTHPIECE TUNING BITS, FR HORN.....177
Q29-DELUXE REPAIR KIT....................................59,193 S5B-FING RINGS, SOLDER ON TYPE, SILVER.......172
Q30-LARGE EMERGENCY REPAIR KIT.............59,193 S13N-PEARL BUTTONS FOR TRPT/CORNET.........172
Q31-SMALL EMERGENCY REPAIR KIT.............59,193
217
 Index by item number
INDEX BY ITEM NUMBER

~S cont.~ ~T cont.~
S18P-TENOR SAX END PLUG, PLASTIC.................192 T23/24/25B/N-SPLIT RIVETS, BRASS/NICKEL.......188
S19G-ALTO SAX END PLUG, GOLD LACQUER....192 T26-ASST OF 100 SPLIT RIVETS BRASS/NICKL....188
S19P-ALTO SAX END PLUG, PLASTIC....................192 T27/28B/N-WASHERS, BRASS/NICKEL...................188
S19S-ALTO SAX END PLUG, SILVER......................192 T29-ASST OF 100 WASHERS, BRASS/NICKEL.......188
S20N/25N/30N-WATER KEYS COMPLETE................54 T30BL/BR-LEATHER POST HANDLE, BLK/BR......190
S35/35S-AMADO WATER KEY ASSEMBLIES...........54 T33BL/BR-HANDLE, END BUCKLE, BLK/BR........190
S39-DRUM HEAD TUCKER........................................186 T34BL/BR-HANDLE, SIDE BUCKLE, BLK/BR........190
S50/51-LIGATURES, Bb CLARINET, NICKEL.........192 T37-HANDLE, HEAVY DUTY, BLACK VINYL.......190
S52G/52N-LIGATURES, SOPRANO SAX..................192 T38-VINYL BLACK HANDLE....................................190
S53G/53N-LIGATURES, ALTO SAX..........................192 T39-HEAVY, BLK LEATHER HNDL W/STEEL.......190
S54G/54N-LIGATURES, C MELODY SAX................192 T42/44/46-FRET WIRE.................................................169
S55G/55N-LIGATURES, TENOR SAX.......................192 T50BR/BL/TN-HNDL, PLASTIC POST, BLK/BR/
S56N-LIGATURE, BARITONE SAX, NICKEL..........192 TAN................................................................................189
S57G/57N-LIGATURE, BASS SAX.............................192 T53-HANDLE, FLAT PLASTIC...................................189
S58-LIGATURE, ALTO CLARINET, NICKEL...........192 T54-HANDLE, BLACK PLASTIC, 5”.........................189
S59-LIGATURE, BASS CLARINET, NICKEL...........192 T55-HANDLE, LONG, FLAT BLACK PLASTIC.......189
S60-Eb CLARINET MOUTHPIECE CAP, NICKEL...192 T56BL-HANDLE, LEATHER W/RINGS, BLACK.....189
S61-Bb CLARINET MOUTHPIECE CAP, NICKEL...192 T60/61-ROCHE’-THOMAS, VALVE OIL...................191
S62G/62N-SOPRANO SAX MOUTHPIECE CAPS....192 T62/63-ROCHE’-THOMAS SLIDE OIL......................191
S63G/63N-ALTO SAX MOUTHPIECE CAPS............192 T64-ROCHE’-THOMAS SLIDE CREAM....................191
S64G/64N-C MELODY SAX MOUTHPIECE CAPS..192 T65-ROCHE’-THOMAS TUNING SLIDE GREASE..191
S65G/65N-TENOR SAX MOUTHPIECE CAPS..........192 T66-ROCHE’-THOMAS BONE BOTTLE, PLASTIC
S66G/66N-BARITONE SAX MOUTHPIECE CAPS...192 SPRAYER......................................................................191
S68-ALTO CLARINET CAP, NICKEL........................192 T67-ROCHE’-THOMAS BORE OIL............................191
S69-BASS CLARINET CAP, NICKEL.........................192 T68-ROCHE’-THOMAS KEY OIL..............................191
S70-VALVE CLEANING ROD, STEEL......................168 T69-ALISYN VALVE, SLIDE/KEY OIL.....................191
S71-TROMBONE CLEANING ROD, STEEL..............168 T70-3M SILVER PROTECTOR STRIPS.....................183
S72-FLUTE CLEANING ROD, ALUMINUM.............168 T71-3M SILVER CLEANER........................................156
S73-TROMBONE CLEANING ROD W/HANDLE.....168 T72-3M COPPER AND BRASS CLEANER................156
S74-TRUMPET CLEANING ROD W/HANDLE.........168 T73-SILVERSMITH’S POLISH, 12 OZ.......................156
S75-TUBA/SOUSA CLEANING ROD, DELRIN........168 T74-SILVERSMITH’S SPRAY, 14.5 OZ.....................156
S76-PICCOLO CLEANING ROD.................................168 T80-PAD PRESERVATIVE, 4 OZ................................191
S78/S79-POLYGON SPRINGS.......................................54 T81-ALISYN BORE/WOOD CONDITIONER............191
S80-S89-VALVE SPRINGS............................................54 T82-ALISYN CORK/TUNING SLIDE GREASE........191
S90-93B-WATER KEY SPRINGS..................................54 T83-ALISYN SOLVENT/CLEANER...........................191
S96-ROTARY VALVE SPRING.....................................54 T84-ALISYN HEAVY DUTY KEY OIL......................191
~T~ T85/T85A-TUNE LUBE................................................183
T2-FLUTE CASE LATCH, BRASS..............................187 ~X~
T5-LATCH W/LOCK, BRASS/NICKEL......................187 X17-30 DRAWER CABINET........................................169
T6-FLUSH LATCH SET, NICKEL...............................187 X17A-EXTRA DRAWERS FOR X17...........................169
T7-LATCH WITHOUT LOCK, BRASS/NICKEL.......187 X18-36 DRAWER CABINET........................................169
T8-DRAWBLT LATCH W/O LOCK, BRASS/NKL...187 X19-EXTRA DRAWERS FOR X18..............................169
T9-SUITCASE LOCK SET, BRASS.............................187 X20-EXTRA CROSS DIVIDERS FOR X18.................169
T9A-SUITCASE HASP ONLY, BRASS......................187 X21-DEEP COMPACT CABINET................................169
T10/T11-STOP HINGE, BRASS/NICKEL...................188 X22-EXTRA DRAWERS FOR X21..............................169
T12-SMALL CASE LATCH, NICKEL.........................187 X23-EXTRA CROSS DIVIDERS FOR X22.................169
T13-LARGE CASE LATCH, NICKEL.........................187 X26-EXHAUST FAN.....................................................159
T14-FLUTE CASE LATCH, NICKEL..........................187 X27-LIGHT FIXTURES................................................159
T15-HANDLE LOOP, BRASS/NICKEL......................188 X30/31/32/33-POLY TANKS/BARREL LINERS........157
T17-LARGE FLUSH LATCH SET, BRASS................187 X50-CHEESECLOTH, BOX OF 80 YDS.....................156
T17C-HASP, 1-1/4”, CENTER TO CENTER...............187 X51-CHEESECLOTH BY THE YARD........................156
T18-LATCH W/LOCK, NICKEL..................................187 X52-100/PKG OF COTTON PADS...............................155
T20-BLACK PLASTIC BOTTOM STUDS..................188 X55-FLANNEL BOLT, 50 YARDS..............................156
T21-CASE REINFORCEMENT ANGLE BRACE.......188 X56-FLANNEL BY THE YARD..................................156

218
 Index by item number

INDEX BY ITEM NUMBER

~X cont.~ ~Z cont.~
X68-ROUND WORK BASKET....................................154 Z60-6/7-SHOES.................................................................2
X70A/B/C-CLEAR LACQUER.....................................158 Z60-8-BOLT FOR LOCKING FORKED ARM................2
X71A/B/C-THINNER....................................................158 Z60-9A/9B-CURVED ARMS............................................2
X72A/B-RETARDER....................................................158 Z60-10-FORKED ARM.....................................................2
X73-CONCENTRATE, DYE, 2 OZ..............................158 Z60-11A/11B-ROLLERS...................................................2
X80A/B/C-PERMA LACQUER....................................161 Z60-12/13-MANDRELS....................................................2
X81A/B/C-REDUCER...................................................161 Z60-14-STRAIGHT MANDREL....................................2,3
X82A/B-PERMA-LAQ DYE.........................................161 Z60-14A/14B/14C-SLUGS................................................3
X83A/B-CATALYST.....................................................161 Z60-14D-TRUMPET STEM MANDREL...................2,3,6
X100-FLUTE PAD OVEN.............................................112 Z60-14U-UPDATE FOR Z60-14.......................................3
X100A-FLUTE PAD OVEN (220 VOLT)....................112 Z60-15-TAPERED TROMBONE MANDREL.................2
X116A/B-SPECIAL BUFFING MOTORS......................91 Z60-16A-SAX ROLLER....................................................2
X183-CORK SANDING ACCESSORY..........................74 Z60-16B-SAX ROLLER WHEEL..................................2
X195-DREMEL VARIABLE SPEED MOTO TOOL...177 Z60-17-EX WIDE SOUSA BELL FLAIR ROLLER........2
~Z~ Z60-17A-FORKED ARM..................................................2
Z2-BELT/DISC SANDER.............................................144 Z60-17B-ROLLER ARM...................................................2
Z4-TOOL CHEST..........................................................172 Z60-18-SM 1” RADIUS SOUSA BRANCH ROLLER....2
Z6/6A/6B-SYNTHETIC LUBRICANT............2,10,44,183 Z60-19-MED. 1-5/8” SOUSA BRANCH ROLLER..........2
Z8/8A/8B-MONEL OIL ADDITIVE........................44,183 Z60-21-SOUSA BELL SHOE...........................................2
Z10A/B/C-COLD CLEANER.......................................160 Z60-22-DENT ROD...........................................................3
Z15A/B-LACQUER REMOVER, SLVR CLEANER...157 Z60-22A-EXTENDED CURVED ARM...........................3
Z19A/B/C-LIME & SCALE REMOVER, DELIMER..154 Z60-23-BURNISHING RING, 4-1/2”...............................3
Z21A/B-IMMERSION TYPE COLD STRIP................160 Z60-24-POWER DISC, 1-1/4”...........................................4
Z22A/B/C-BRUSH ON TYPE COLD STRIP...............160 Z60-25-POWER DISC, 3”.................................................4
Z25A/B-TARNISH REMOVER....................................155 Z60-25AL-LOW PROFILE POWER DISC, 2-1/2”..........4
Z27-PLATIC FLUTE TRAY.........................................154 Z60-25L-LOW PROFILE DISC, 3”..................................4
Z30/Z32-TOOL CHESTS..............................................172 Z60-26-POWER DISC, 4”.................................................4
Z35-AIR BUFFER W/4 BUFFS....................................150 Z60-26L-LOW PROFILE DISC, 4”..................................4
Z35S-SHAFT ONLY.....................................................150 Z60-27-POWER DISC, 5”.................................................4
Z40-JET SAND BLASTER...........................................155 Z60-28-ROLLER, 5”..........................................................5
Z42A-AIR JET, 1/8”......................................................155 Z60-29-TAPERED SLIM ROLLER..................................5
Z42S-SAND NOZZLE, 1/4”..........................................155 Z60-30-CONVEX ROLLER..............................................5
Z43A-AIR JET, 5/32”....................................................155 Z60-31-DENT MACHINE VISE.......................................3
Z43S-SAND NOZZLE, 5/16”........................................155 Z60-32-30 DEGREE ARM................................................5
Z45-BLOWER ONLY...................................................150 Z60-33-ROLLER, 7”..........................................................5
Z45A-MOTOR ONLY...................................................150 Z60-36-CURVED ROLLER, 1-1/4”..................................6
Z46-COMPLETE BLOWER W/1 HP MOTOR............150 Z60-36A/36B-STEM ROLLERS.......................................6
Z51A-BUFFING HOOD................................................150 Z60-37-TROMBONE SLIDE DENT ROLLER................6
Z51BL/BS-BRACKETS................................................150 Z60-38-FLUTE HEAD MANDREL..................................6
Z52-FLEXIBLE TUBING.............................................150 Z60-39-FLUTE BODY MANREL....................................6
Z54-Y TUBE..................................................................150 Z60-40-STRUT..................................................................6
Z55-3 SPACERS............................................................146 Z60-50-TONE HOLE/BODY BURNISHING SET...........7
Z56-SAFETY FLANGE NUTS W/WRENCH..............146 Z61-BASE FOR Z60..........................................................9
Z56W-WRENCH ONLY...............................................146 Z61E-DENT MACHINE BASE (EUROPE).....................9
Z56L/R-NUTS...............................................................146 Z61S-DENT MACHINE STAND......................................8
Z58-COLLECTOR ASSEMBLY...................................150 Z61-1/2/3-CURVED RODS...............................................9
Z58B-BAG ONLY.........................................................150 Z61-3C-SM BURNISHING WHEEL FOR Z61................9
Z60-DENT/BURNISHING MACHINE............................1 Z61-4-BRAKE & 2 LOCKS..............................................9
Z60S-BENCH MOUNT FOR Z60.....................................8 Z61-5-MANDREL CLAMP...............................................9
Z60-1-FRAME FOR Z60 W/SPEED ADJ.........................2 Z61-5B-SMALL BALL.....................................................9
Z60-1U-SPEED ADJ UPDATE FOR Z60 FRAME..........1 Z61-6-COUNTERWEIGHT..............................................9
Z60-2-PRESSURE ADJ WHEEL......................................2 Z61-7-STAND FOR Z61....................................................9
Z60-3A/3B-CIRCULAR BURNISHING WHEELS.........2 Z61-8-SETTING NUT..................................................9,10
Z60-4-LONG ROUND TUBE...........................................2 Z61-9A/B/C/D-BALLS...................................................10
Z60-5A-LARGE BALL.....................................................2 Z61-11-ADJUSTABLE ROD..........................................10
219
 Index by item number
INDEX BY ITEM NUMBER

~Z cont.~
Z61-13A/B/C/D/S-ALUMINUM BALLS.......................10
Z61-16-BASE VISE.........................................................10
Z71-WALL MOUNT BUFFER.....................................145
Z73-WALL MOUNT BUFFER.....................................145
Z97L/R-SCRATCH BRUSH MACHINES...................151
Z100-Z105-FLOOR BUFFERS.....................................145
Z110-113-BELTSANDERS...........................................144
Z115A-C-BELTSANDER BELTS................................144
Z116A-C-BELTSANDER BELTS................................144
Z120-WOODWIND BENCH LATHE............................91

220