CNNPX310R-6P
6-port sector antenna, 2x 824–960 and 4x 1710–2170 MHz, 65°
HPBW, 3x RET with manual override.
Integrated Internal Remote Electrical Tilt (RET), with independent control of electrical tilt
with manual override on all arrays
General Specifications
Antenna Type Sector
Band Multiband
Grounding Type RF connector inner conductor and body grounded to reflector and
mounting bracket
Performance Note Outdoor usage
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, high band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6
Remote Electrical Tilt (RET) Information, General
RET Interface 8-pin DIN Male
RET Interface, quantity 1 male
Dimensions
Width 370 mm | 14.567 in
Length 2630 mm | 103.543 in
Depth 120 mm | 4.724 in
Electrical Specifications
Operating Frequency Band 1710 – 2170 MHz | 824 – 960 MHz
Remote Electrical Tilt (RET) Information, Electrical
Protocol 3GPP/AISG 2.0 (Single RET)
Power Consumption, idle state, maximum 2W
Page 1 of 5
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 28, 2020
CNNPX310R-6P
Power Consumption, normal conditions, maximum 13 W
Input Voltage 10–30 Vdc
Internal RET High band (2) | Low band (1)
Electrical Specifications
Frequency Band, MHz 824–890 890–960 1710–1880 1920–2170
Gain, dBi 17 17.5 16.8 17.8
Beamwidth, Horizontal, degrees 67 62 68 63
Beamwidth, Vertical, degrees 7.5 7 7.2 6.5
Beam Tilt, degrees 0–10 0–10 0–10 0–10
USLS (First Lobe), dB 18 18 18 18
Front-to-Back Ratio at 180°, dB 25 25 25 25
Isolation, Cross Polarization, dB 30 30 30 30
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0 1.43 | 15.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150
Input Power per Port, maximum, 500 500 300 300
watts
Material Specifications
Radome Material Polyester fiberglass pultrusion
Mechanical Specifications
Wind Loading at Velocity, maximum 1,430.0 N @ 160 km/h | 321.5 lbf @ 160 km/h
Wind Speed, maximum 200 km/h | 124.274 mph
Packaging and Weights
Width, packed 440 mm | 17.323 in
Depth, packed 216 mm | 8.504 in
Length, packed 2755 mm | 108.465 in
Net Weight, without mounting kit 36.5 kg | 80.469 lb
Weight, gross 38.5 kg | 84.878 lb
Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
Page 2 of 5
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 28, 2020
CNNPX310R-6P
ROHS Compliant
Included Products
T-029-GL-E — Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel antennas. Includes 2 clamp sets.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
Page 3 of 5
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 28, 2020
T-029-GL-E
Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round
members for panel antennas. Includes 2 clamp sets.
General Specifications
Application Outdoor
Color Silver
Dimensions
Compatible Length, maximum 2850 mm | 112.205 in
Compatible Length, minimum 1500 mm | 59.055 in
Compatible Diameter, maximum 115 mm | 4.528 in
Compatible Diameter, minimum 60 mm | 2.362 in
Antenna-to-Pipe Distance 85 mm | 3.346 in
Bracket-to-Bracket Distance 1400 mm | 55.118 in
Material Specifications
Material Type Galvanized steel
Mechanical Specifications
Mechanical Tilt 0°–8°
Packaging and Weights
Included Brackets | Hardware
Packaging quantity 1
Regulatory Compliance/Certifications
Agency Classification
CE Compliant with the relevant CE product directives
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Page 4 of 5
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 16, 2020
T-029-GL-E
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
Page 5 of 5
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 16, 2020
