Control Valves - Actuators - Accessories MIL 41000 Heavy Duty Cage Guided Control Valves KSB o.) () = -MIL41000 F4 Table of Contents Introduction. Features Typical Applications Technical information '* Model Decodification '* Standard Sizes / Ratings Standard End Connections © General Data ‘© Seat Leakage Class / Temperature Range ‘© Flow Coefficients (Rated Cv) Construction Dimensions and Weights o1 02-03 03 04-12 13-16 17-18 Introduction Hallmarks of exceptional service requirements of control valves are four fold: high pressure drop capability, high capacity, tight shut-off and high temperature capability. MIL 41000 series exhibits these characteristics in all valve sizes. The rugged cage guiding, optional pressure balancing and a host of custom-engineered trim designs make these valves suitable for higher pressure drops and other severe applications, where conventionally designed control valves failto perform satisfactorilyFeatures jher Allowable Pressure Drops 41000 series control valves provide exceptional and dependable performance over a wide range of pressure drops typical of severe services. Just as important, it handles a vast majority of all shut-off pressures with standard pneumatic spring- diaphragm actuators. Greater Capacity with Low Recovery Rated capacity for each 41000 series valve is at top levels established for contemporary cage guided valves. These unusually high capacities are attained with minimam pressure recovery, as indicated by the high critical flow factors, which minimises possibility of cavitation in liquid service. Tight Shut-off 41000 series valves can provide single scat leak tightness of Class IV in accordance with FCI 70.2, ortheexceptional leak tightness of Class V. Wide Temperature Range Standard 41000 series valves handle temperatures from -30°C to 566°C, Standard bonnet is designed with a moderately finned extension, so no bonnet change is necessary in this temperature range. Optional designs makes 41000 series control valves suitable for operations up to -196 °C and above 566°C. High Performance Material as Standard Without exception, the material specified as standard for 41000 series valves have been tested and selected to provide trouble free operation in services with high pressures and extreme temperatures. The superior trim material employed ‘ensures durability of the valve for any severe application, 02 S Simple, High Performance Trim Design Every valve is available with standard and reduced Cv cages. For balanced design, common plug and seat result in reduced spare parts inventory. For applications where cavitation or high noise is anticipated, standard cage is replaced with multi-hole cage, Clamped seat and cage facilitate easy trim removal and valve maintenance. ® = rcMIL 41000 Variety of Specially Engineered Trim Packages Lo-4B / Anti-cavitation Single Stage Trim Provides excellent noise attenuation for compressible fluids and cavitation protection for liquid service. Lo-dB/ Anti-cavitation Multistage Trim is designed for noise control on gas or steam at high pressure drop ratios and high pressure drops for liquid service. Auxiliary Shut-off Pilot Plug Used for tight shut-off requirements, with a pilot plug closing the balancing holes in shut-off condition, Typical Applications MIL 41000 series heavy duty cage guided control valves are engineered for the most demanding applications in process industries, ranging from power generation to integrated petroleum and chemical processing pants and 4 host of other modern process industries. These valves provide complete solution for all application needs in core sectors. A few of the critical typical applications for which these valves are employed includes: Utility/Captive Power plants © Feed water regulation Condensate pump recirculation ‘© Spray water control and block © Deaerator pegging steam control ‘© Soot blower pressure reduction © Heater drain ete. ec] Compressor antisurge Separator letdown Gas gathering and metering stations Make-up hydrogen & hydrogen quench Cold & hot recycle gas control Reactor feed & stripping steam Reformed gas vent, hydrocarbons to flare, etc. eee e eee yy MIL q Pressure Energized Dynamic SealRing Tight shut off attained by arresting the leakage through the seal ring by means of a pressure energised polymeric seal ring located in the plug pressing against the walls of thecage Static Seal Ring Designed for high pressure tight shut-off and continuous throttling applications. The special seal ring with a longer heel located in the cage imparts excellent dynamic stability while throttling, [MIL 41000, 12" 300# ASME for Charge Gas Compressor Antisurge Valve ‘for Petrochemical Complex, Panipat, Haryana 03Technical Information Model Decodification MIL 41000 “a , ” ” , ©. Undefined 1. Low capacity unbalanced 2. With pressure-energised ace Direct spring 41, Heavy duty. polymeric seal ring (stati) ©. Undefined 4, standard caieerd cage guided Slobe control 3. With pressure-energised 1. Linear Pastore 5 ‘ive pomeri seal ring (aynamic) Se japhrage are 4. With auiar shutoff pilot 67, Direct piston 3. Multistage, olinder 7 Hw aay plug > cutomzed —* nase eae angleconvol 5. with metalic sa ring X. On-Off aaa Siinder' ave =“ 4 Mutiare 6. With polymeric seal ring Pee 90. Electrical actuator 7. High capacity unbalanced 9. With graphite seal ring 1508-6008 U UB UB U USB USB UB UB B 900H-15008 U US USB US SB SB SB BB 2s08- aso U US USB US SB SB se 6 6B (other sizes or rating an also be given, consult MIL VALVE Enno eee {: Balanced 4120041400 41500/ 41600/ 41800 inch) @MIL 41000 Standard End Connections” Sor PRU eC} es 075-2 Fse Fse FSB 25-18 Fe Fe Fe 8 20-24 FB Fe 8 8 26-32 Fe ; E Flanged (RF, RT TAG, FA) S:Socket Weld Burt Weld IN, 5,65 or other rating and end connection can be usually supplied. Consult MIL General Data rong ao Type: High Capacity Globe or Angle Single stage / Multistage (Anti 180°C Graphite row toopen "rlowta dose Z MIL 05Seat Leakage Class / Temperature Range co an100 41200" 41300" 41400 41500 41600" ar700 «41900 ‘lass: 0.5% of maximum rated capacity t 50 psig atmosphere Class: 0.1% of maximum ated capacity at 50 psig to atmosshere Clas V + 0.01% of maximum rated capacity at 50 pig to atmosphere 196 196 Clas V: 5 10° per minute of wa 23.33 For 41200, max. working pressure: 400 bar For 41300,max.orkingpressure:200bar Saas 556 35 a5 566 566 a7 556 Special designs avalableupto305°Cand <4" vahesize,consu Ml Soe (i) 075-3 15-6 15-32 15-32 075-8 15-4 erential Special designs avalable for appliatlons outside the given temperature range, consul MI MIL 41000 peer wv we v - v - v - v v vw “ Thiclsss usually specified forericl applications where the conrolvalvemay be required toe cored for long periodsafsime ithigh diferent pressure arossthe seating surfaces i) = -NIC MIL 41100 Design (Low Capacity, Unbalanced) MIL 41100 Single Stage Low Capacity Unbalanced Valves (Linear / Equal % / On-off) ital Flow Factor (€or F) at full pen postion 0.90 Giecuaekee ke uous 07581 075 150#-2500# 17,25 So (inch) RATING Cocco) 15075" 1508-25008 17,2538 68 10 12,16 20" 2 7s" 1508-25008 17,2538 68 10 12,16 20" 25%, 30 25 075" 1504-25008 : 8 10 12,16 2o™ 25%, 30" 3 15 1508-6008 - - - 25,30 "20,25, 80 wit 1.5 stroke ther Cvs on request MIL 41102 Single Stage Low Capacity Lo-dB / Anti-cavitation Valves tical Flow Factor (€or F) at full pen poston: 0.34 Een are eae P| O75&1 075 150#- 25008 17,25,38 Da (ASME CLASS) o7 15 075" 1508-25008 17,2538 6 8 10 12,16 20" 2 ors 1504-25007 17,2538 6 8 10 12,16 20" 25", 30" 25 075" 1508. 25008 ‘ 8 10 12,16 20" 25", 30°" 3 15 150H- 6008 Ss Ss Ss 25,30 620,25, 30th 15° aroke ‘ther cvs on request Z MIL (MIL 41000 MIL 41700 Design (High Capacity, Unbalanced) MIL 41700 Single Stage High Capacity Unbalanced Valves (Linear / Equal % / On - Off) itil Flow Factor (€or F) at full open poston: 0.90 ae ies ECOL) 075.1 ays Wok-soow ny 2S : fy 15078 stm coor aE sw “| TT] 25, 3, on 2075 sok soo 728 2% 248 to soon ws TR : 4 1S -150# - 600# - - - = 49 66 pel 140 195 - - 2750, 5 2 . ws x00 00 150% - 600% 68 126 es +320, ‘ee 82 ts0h-etor ToT a3 oo 8: Cv available for 1" valve only 6275 with 4" orifice diameter Other Cvs on request, MIL 41700 Single Stage High Capacity Lo-dB / Anti-cavitation Valves real Flow Factor (CFF) at fll pen poston 0.84 Pe Rest Secihce ca O Ga es a Se 5 5 5 te 15075 sson-cooe 1225, an.25 ; a5 Dl rere lesen) 3729 [zs . . Tl 215 ores = sas 30S aa, a 415 tees Aas Tt a . 200, an corto 10 12% ee : = 00.5 : Gy available for 1” valve only Other Cvs on request. a 08 Ss ZB MILMIL 41000 Clamping cage MIL 41200 Design (Tight Shut-off, with Static Seal Ring) Static Seal Ring °° Seal Ring (static) : The special seal ring with 2 longer heel located in the cage imparts excellent dynamic stability during throttling, while proceeding FCI 70.2 Class V leak tightness in the closed position MIL 41200 Static Seal Ring Valves ( Linear / Equal % / On-off) Critical Flow Factor (Cerf) at full open position : 0.90, eae keane [eee Dom [oe Ds Ds | aor i) 075 9000-25000 20 075 9008-1500 2 _16,20,25, . . . 15 25008 ale 20, 25, 30,35 . . 25 1.5 9008-25008 ~ San ene sare 15 ; ; + 30,47, 65,75 ; : 1504 6008 2 : : E 120 : : . . 25, 30,47, . . 3 15 poet ‘9008 - 1500 2 : : : 95 : : 075 ; ; : 2 25,5060" = - 25008 15 ; ; E : 30, 75° 2 : 150¢ - 6008 . . . - 95, 120, . 140, 170 9004 - 15008 4 2 . . . . - 90, 120, - 25008 sana 6 2 9008-15008 - : ; : : 25 "cy avalable for Onoft valves only ‘other Orson request a Ba ZB MILMIL 41000 MIL 41300/41400/41500/41600/41900 Single Stage Valves Hic ema 2 15 2 1.84 5 184 2 - 2s a2 - 2s : 325 : 3 = 325 3 = 325. 48 a3 - 325 = 4325 5 6a 6x4 3.25, : 4 = 4375 4 = 4375 xa oa 4375 : 6 4a7s > ‘ 5.125 6 5 = 8125 : : 8 6s 4 65 a 2 2s 108 65 > - 1s 6s: : 0 69 > 10 > 8 10 a : 11068 - aos : m8 : 2 = 975 2 - 975 : 4 975 : 4 = 4 = ari 16 ; B 18x16 zs - 8 20 a m = | A 2 Sal ev avlable for On-Off Valves only 10 ‘crtial How Factor (¢ or) for Linear Equal % 2 fll open postion: 0.80 {cra How Factor (€or) for La / Ante at fl open poston = 0.8 = 075 12,16,30,40 14.35 812,162530 15 12,16,40 14.35 122530 15 26,30,35,65,75, 16,26,35,50,65 15,25,50,65 18 30,35,75 16,26,30,35,50,65,90 15,25,30,35,50,65 15 26,3065, 16,26,35,50,65 15,25,50,65,75 2 30, 45, 60,75,95,130 '35,56,30,110,120 30,45,95,120 2 30,45, 60,75,95,130,140,155 _35,56,80,110,140, 30,45,70,95,120 2 30, 45, 60,75,95,155 35,56,90,110,140, 30,45,95,120 2 30, 45, 60,75,95,155 35,56,90,110,140 30,45,65,95,120 2 30,45, 60,75,95,155,190 35,56,90,110,140, 30,45,95,120 2 ‘95, 160, 205 45, $0,140,170 45,70,95,120,145,180 2 30,45,60,85,160, 205,240 45, 80,140,170,200,225 _45,55,70,85,120,145,195 2 60, 70,95,155,160,205,240 45, 56, 90,110, 140, 45,70,95 110,120, ‘702205 145,195 25 205, 240,260 ° 155, 170,225 145,195 2 160,205, 250, 300, 360, 144,255,300, 360 130, 145 25 = = 105, 210, 255, 300, 2 160, 205,300,350, 400 144,170,175,205,255,300,360 _70,125,130,145 25 5 ‘400 105, 210, 255, 300, 2 160, 204, 300, 350, 400 14,255,360 130,145 25 425 300,400, 425 105,210,255, 300,425 "" 25 260, 380, 500,575 230,300,400 105,210,255,300 3 5 575 155, 175, 315, 400,450 25 260,280,500, 640 230,300,400 105,210,255,300 3 5 575,640 155,175,315,400,500, 550 25 260,280,500,640 230,300,400 105,210,255, 300 3 5 575,640 155,175,315,400,500 25 260,380,500, 640 230,300,400 105,210,255,300 3 5 575,640 155,175,315,400,500 2 ‘400,750 360,650 200,650 35 E 750 250,500,750 3 400,750 360,650 300,650 a5 900 200,900 250, 500, 750, 900 3 400,750 360,650 250,300, 500, 50 a5. 900, 1000 800, 900, 1000 "750, 850, 900, 1000, 3 400,750 360,650 300,650, 35 5 750 250,500,750 3 400,750 360,650,900 250, 500, 650 a5. 900, 1900 800, 1000 750, 1000 a5 60 220 20 4 700, 1050, 1260 500, 750, 900, 1150 580,725, 1100, 1260 4 700, 900, 1050, 1260, 1400 500, 750, 900, 1250 315,580,625,725,1100, 400 4 1100 1000 1050 4 1950 1760 1600 4 1600,1830,2150 1600,1960 725,1400, 1800 4 1800, 2000 = 1800 ‘ 2500 2250 72000,2200 4 2600,2750 1600, 2450 1800,2100 6 2750 250 2200 4 2500,3100,3400"" 1960, 2750 2100 6 3500, 3800" 3100 3500 8 5000, 6000"* 2300, 4500, 4500 2 ‘3000 - cy 425 with 3° sok ‘other Cvs on request, a a ZB MILMIL 41000 Multi-hole Trims for Noise / Cavitation Attenuation In compressible fluid flow, Mult-hole trim attenuates noise, by shifting the peak frequency outside the audible range. Also the fluid acoustic energy is lowered by reduction in size of fluid jets. For cavitation control in incompressible flow, multi-hole trim design is used in flow to close direction where flow is divided into small jets which allows cavitation to occur at the center of cage, away from all metal surfaces, avoiding damages to trim parts. MIL 41003 - Multi Stage Lo-dB / Critical Flow Factor (or F) a full open position: 0.95 os Ga || Cats |S Dd ae ns Lr 150#- 6008 2 35,45, 65,75 9008-15008 2 35, 40,45, 65,75, 100, 1508-6008 2 30,42, 55,70, 85, 100, 120 4 9008-15008 2 30, 42,45, 55, 65, 70, 100, 120 25008 2 45, 60,75, 80, 90, 95, 1508-6008 2 45 4a 9008-15008 2 42,95 1500-15000 2 55, 80, 95, 105, 145, 195, 95 co 25008 Z 25 120 1508-15008 2 45,75 ext 2 45, 65,70, 95 25008 25 120 1508-600% 3 155, 195, 280 2008-15008 25 155, 195, 300 25 155 25008 3 215, 300 to 150P-6008 35 250, 430, 500 9008-15008 3 250, 430, 500 1x8 9008-15008 3 400 12 1508-60084 650, 725, 20 1500-60004 2000 other Cvs on request, Lo-dB / Ant-cavitation Multi-stage Trim with Diffuser Designed to provide additional noise and cavitation attenuation properties in *Flow to close” applications. "2 MIL 41000 MIL 41004 Design (Multi-stage Low Noise Valves) ‘Multistage Lo-dB. Trim: Designed to provide noise attenuation for gas or steam applications at high pressure drop ratios. MIL 41104 Unbalanced Multi-stage Lo-dB Valves 1 Flow Facto (Cot F) a full open postion: 095 ORIFICE DIAMETER (inch) Vs RATED Cv arr | _cnreromneenennsnarn | ci) a fa 1 075 1504-6008 25 a8 - - : 1 0.75 s00#-25008 3,172 38 5 - - : 15 15° 9008-2500# TZ 3s" 10 12,16 20 - 20 15°" 9008 - 25008 - 2", 3.8", 6™ a" 10 12,16 20 25 25 1.5% 9008 - 25008 - - an 10 12,16 20 25 3015 S008- 25000 - : 10 16 20 25,30 v1.7.2, 3.8, 6, 8 with 0.75" stroke ‘Other v's on request MIL 41004 Balanced Multi-stage Lo-dB Valves Ctl Flow Factor (oF F) at full pen poston 0.85, Soy Runs ORIFICE DIAMETER A () CON sorCD) {inch) Py 2 25 15 1504008 1216 2 1808-1008 a 2 12.16.2370 1508-1008 ars 2 25,45 95,105 ‘ 25008 3.25 2 45, 80 13015008 sms 2 tes . 25000 4375, 25 120, 160 s 13015008 sas 3 210,290,300 0 1308-15008 : 3 300,35 500 2 1500-008 os 4 0,085 " 15015008 2 4 noConstruction MIL 41500 / 41600 / 41900 Balanced Construction Typical Cage Designs (2) Equal % (6) Linear (0) Lo-dB/Anti-cav Linear MIL WMaterial of Construction MIL 41000 1 Valve Plug Stem 2 Packing Flange Stud 3 Packing Flange Nut 4 Packing Flange 5 Packing Follower 6 Packing Spacerantern Ring 7 Gland Packing 818 Bonnet, Body ° Body Stud 10 Body Nut " Body Gasket 2 Plug Pin 41200 41200 13 Sealing 414/500 41600 41900 1“ Valve Plug A cage 16 seat Ring Diuser Seat Ring ” Seat Ring Gasket 19 Flat Spring & Pio Pug a0 (For MIL 41400, ref. page 15) me Getip Pilot Spring (For MIL 41409, ef. page 15) 17.4 PH SST H 1075 (< 343°C) SUPER ALLOY (ASTM A 638 Gr 660) (6343 °¢) ASTM A 193 Gr 88 ASTM A 194 Gr ASTM A 105, 308 SST 208 SST PTFE < 180°C GRAPHITE > 180°C Carbon Steel : ASTM A 216 Gr WCC Alloy Steel: ASTM A 217 Gr WCs Alloy Steel: ASTM A 217 Gr WC3 Alloy Steel: ASTM A 217 Gr CSIC12ICI2A Stainless Steel: ASTM A 351 Gr CF8/CFBM/CFBCICF3/CF2M ASTM A 193 Gr B7 (< 454°C) ‘ASTM A 193 Gr B16 (454°C - 538°C) [ASTM A 453 Gr 660 (> 538°C) [ASTM A 194 Gr 2H (<454°C) [ASTM A 194 Gr 7 (454°C-538 °C) ASTM A 194 Gr 8C(> 538°C) 161 SST + Graphite (spiral wound) 316 SST Spring energised Ekonol+PTFE Spring energised Ekonol+PTFE Ni Resist D3 PTFE Graphite 17.4 PH SST H 1075 (< 343 °C) ‘CAGNM, Nitrided (> 343 °0) CFBM Chrome plated (<243 °c) ‘CAGNM Nitrded ( 343 °c) 410 SST (< 343°C) 316 SST + Stelite (343°) 16L SST + Graphite peal wound) APH SST H 1075 (< 343°C) Inconel X 750 (> 343 °C) CAGNMsStellte No.6, Chrome plated (< 243°C) CAGNMStellte No.6, Nitrided Spring Stee! (< 343°C) Inconel X 750 (> 343 °C) "Material indicated above are for reference only. MIL eserves the right to supaly alternate material forms due to constant product upgradsion ‘Other spect material are avaiable on request. 4MIL 41000 Seal Ring (Dynami) MIL 41300 Construction (Tight Shut-off, with Dynamic Seal Ring) "Seal Ring (Dynamic) : Tight shut-off achieved by arresting the seal ring leakage to FCI 70.2, lass V limits, by using a special pressure energised MIL 41400 Construction (Tight Shut-off, With Auxiliary Shut-off Pilot Plug)” Pot Plog “rcp Piet Spring Main Plug Valve in Open Position Valve in Closed Position © auxiliary Shut-off Plot Plug: Used for applications, where tight shutoff is required in the high temperature service, beyond capebilties of seal rings. The pilot plug closes the balancing holes in shut-ot# condition. No ‘Soft’ parts are used for sealing and FCI 70.2, Class V tight shut-off can be ensured even beyond 566 °C ) MIL \) 5 (MIL 71000 Angle body valves are tailored for the following applications '* Hydrocarbons to Flare ‘© Compressor bypass or antisurge ‘© Gas gathering and metering stations ‘* Other applications where piping configuration requires an angle body © Compressor recycle Bonnet Bonnet Plug cage Plug Seat Ring cage Seat Ring Angle Body ‘Angle Body MIL 71600 Construction MIL 71104 Construction (Angle Valve with Polymeric Seal Ring - Cast Design) (Multi-stage Angle Valve - Forged Design) ‘Note: MIL 71000 being a custom engineered control valve, the data furnished here is representative rather than inclusive of complete product offering. MIL can specifically design 71000 series to meet any specific application requirements with all possible combinations of Inlet and outlet sizes. For compressible fluids, generally angle valves have expanding outlets The trim variants available in 41000 series described hitherto can be provided for 71000 series also 16 ) W MILMIL 41000 Dimensions and Weights Dimensions (mm) & Shipping Weights (W in kg) for MIL 41000 Body Subassembly”” oar) oreo oar) Evi) aya) prt) [SS eee ee 7) 2m 6 82ST 2 2655 52 25h 5G SH ASHES 8S a2 288s HBTS 28ST 1308 3 298 1530010038115 300S 1003365 120« 300100 a 352137626881 4 352 137320165685 13720 t6S— 58S 1530s a 4517430203878 89055 6 451 tz 3902578174380 2a 50858390280 8 54320549569 205 a5 at g0NS 2304869 toe 75227538 wt 752375388752, 269 53450 10 673 «2556723085679 752269564 77 3332098077558 620 98D 382715 893866001170 «527385. 6001170387855 1480 16 1016 ai 705 14551057 4597051455 «108597181506 20 1420527822765 1420588782765 HBS? 8233100 yeas 1120 as 7551590460445 755 | 20S 851740 24 1500561867 1500561867 5 5 5 nr) eno oreo) Boe) FLANGED (RT) eter) a 333589 tah AS33828 SOS 196 3783S B12} SKK HS 0 - : 2 - 315135198 3881S 394 120251105405 4B 251105 - - 3 44 1312831184835 1483005301200 aa 51h 1612217532532 zi - 4 5161 3308S 5325330185 S7S 31a (280 6a ma 212330 oa 7172053038072 330380750170 6 17-205 3909577 2380395760182 3 917-58 52170391258 521703022232 gs mas 10 109581 570 0011793105 OS : we - 5 - : : - 1022283646 +1800 2133350626 123557368 - 5 - 14x10 - : - = 1200-316 6802300 = pprosimate simensions and weights fuished ae for reference ony. ) W = =MIL 41000 Dimensions (mm) & Shipping Weights (W in kg) for MIL 41000 Body Subassembly”” Ree heed Reed Retr) ete) ere) SS we] wD E - - 2 757583682855 32015288 HOS 288g] HGS 108281105 3 4401153005500 5 ast 200 18 aa aka aah ta HDT 4 ma 173137 380302930 HS oa oo 77330 ea 560162330215 S605 5802568173080 6 560162390 235560165380 « 235680177390 85 3 655 20596 = 355655015556] Sz1 708 to 8022556750802 2854550882985 2 sR wD 50 msg] 4 1029385600 5 5 5 5 5 5 16 1108459705 tats 1085978 tats 5 5 : 2 ease 782 - - 5 : : ‘Approximate dimensions and weighs furnished ae for reference only PY RA Sales & Service offices ‘New Delhi: MIL Controls Ltd, KSB House, A-96, Sector-4, Gautam Sudh Nagar, Noida.201 301, india Tel: +91 (120) 2541081-83,2541501.03, Fax: 491 (120) 2550567 E-mail salesnoida mil@ksb.com Mumbai: MIL Controls Ltd,KSB Pumps Ltd, 126, Maker Chamber Il, Nariman Point, ‘Mumbai 400021, India. Tel: +91 22) 65588787, 65588757-59, 66588761, Fax: +91 (22) 65588788. E-mail salesmumbaLmil@ksb.com Kolkata MIL Controls sd, KSB Pumps Ltd, 2nd Floor, 30 Circus Avenue, Kolkata 700 017, India. Tel:+91 (33) 22809847, 22809848, 22870473, Fax: +91 (63) 22870588, 22809847. E-mail saleskolkata.mil@ksb.com Cherinai: MIL Controls Ltd, KSB Pumps Ltd, Guindy House, 2nd Floor, No: 95, ‘Anna Salai, Chennai 600 032, india. Tel: +81 (44) 22352571 -72, 22300629, Fax: +91 (44) 22352749 E-mallsaleschennal.mll@ksb.com Vadodara: MIL Controls Ltd, KSB Pumps Ltd, 4-8, Ramakrishna Chambers, Productivity Road, Vadodara 390 005, India. Tel: +81 (265) 2330832, 2333226, Fax: +91 (265) 2350002 E-mail: salesbaroda mil@ksb.com Pune: MIL Controls Ltd, KSB Pumps Ltd, Plat No - 28/21, Dll Block, MIDC, Chinchwvad, Pune 411 018, India. Tel-+91 (20) 27409100, Fax: +91 (20)27470890 E-mail: salespune,mil@ksb.com Middle East & Asia Paci China: KSB Valves (Shanghai) Co.Ltd 29 F.Xing-Yuan Technology Building, 418 Guiping Road, Shanghai, China, Post Code: 200233, Tel 86-21-6485 1778, Fax: +86-21-6485 9115 Dubal: KSB Middle East FZE, P.0.Box: 18315, Jebel All Dubal, UA E, Tel 4971-4-883 0455, Fax 4871-4.883 0456 indonesia: PTKSB Indonesia, Jalan Timor Blok 02-1, Kawasan Industri MM 2100 Cibitung, Jawa Barat, Indonesia Tel: +6221 89983570, Fax: +52 21 89983571 Korea: KSB Korea Ltd, Soo Young Building, 6¢-1, Hannam-Dong, Yongsan-Ku, Seoul 140-210, Korea. Tel: +#82-2-790 4351, Fax: +82-2-790 4350 Malaysia: KSB Malaysia Pumps & Valves SDN BHD 2, Jalan PIU 3/47 Sunway Damansara, 47810 Petaling Jaya, Selangor Darul Ehsan, Malaysia, Tel: +60-03-7805 3397, Fax: +60-03-7805 1373 Singapore: KSB Singapore (Asia Pacific) PTE Uta, & Woodlands Walk, Singapore 738248. Tel: 6757 7200, Fax: 6482 3005. Taiwan: KSB Taiwan Co.Ltd, No: 154-6 Sec 1, Datong Ré, Xizhi Dist, 10635, New Taipe’ City, Tel: +886-2-2649 2255, Fax: ¥886-2-2649 8833 Thailand: KSB Pumps Co Ltd, Bangkok 10530, Thailand. Tel +66-2-988 2324, Fax: +66-2-9882213 18 i) MIL «\y MIL Controls Limited Meladoor, Annamanada, Pin 680 741, “Thrissur Dist, Kerala, india ‘Tel: 481 (a80) 2685700 Fax: + 81 (480) 2880952 Email: sales mil@ksb.com ‘Web : www milcontrols.com AKSB Company - KSB a) © cn Una. Ate