Important notice

Dear Customer,

On 7 February 2017 the former NXP Standard Product business became a new company with the
tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS
semiconductors with its focus on the automotive, industrial, computing, consumer and wearable
application markets

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use
the references to Nexperia, as shown below.

Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/,

use http://www.nexperia.com

Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use

salesaddresses@nexperia.com (email)

Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on
the version, as shown below:
- © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights
reserved
Should be replaced with:
- © Nexperia B.V. (year). All rights reserved.

If you have any questions related to the data sheet, please contact our nearest sales office via e-mail
or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and
understanding,

Kind regards,

Team Nexperia
 PESDxS1UL series
Unidirectional ESD protection diodes
Rev. 3 — 25 October 2011 Product data sheet

1. Product profile

1.1 General description

Unidirectional ElectroStatic Discharge (ESD) protection diodes in a SOD882 leadless ultra
small Surface Mounted Device (SMD) plastic package designed to protect one signal line
from the damage caused by ESD and other transients.

1.2 Features and benefits

 Ultra small SMD plastic package  Ultra low leakage current: IRM < 700 nA
 ESD protection of one line  ESD protection up to 30 kV
 Max. peak pulse power: PPP = 150 W  IEC 61000-4-2; level 4 (ESD)
 Low clamping voltage: VCL = 20 V  IEC 61000-4-5; (surge); IPP up to 15 A
 AEC-Q101 qualified

1.3 Applications
 Computers and peripherals  Communication systems
 Audio and video equipment  High-speed data lines
 Parallel ports

1.4 Quick reference data

Table 1. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff voltage
PESD3V3S1UL - - 3.3 V
PESD5V0S1UL - - 5.0 V
PESD12VS1UL - - 12 V
PESD15VS1UL - - 15 V
PESD24VS1UL - - 24 V
Cd diode capacitance f = 1 MHz; VR = 0 V
PESD3V3S1UL - 207 300 pF
PESD5V0S1UL - 152 200 pF
PESD12VS1UL - 38 75 pF
PESD15VS1UL - 32 70 pF
PESD24VS1UL - 23 50 pF
NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

2. Pinning information
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
1 cathode [1]
1 2
2 anode 1 2
sym035

Transparent
top view

[1] The marking bar indicates the cathode.

3. Ordering information
Table 3. Ordering information
Type number Package
Name Description Version
PESD3V3S1UL - leadless ultra small plastic package; 2 terminals; SOD882
PESD5V0S1UL body 1.0  0.6  0.5 mm

PESD12VS1UL
PESD15VS1UL
PESD24VS1UL

4. Marking
Table 4. Marking codes
Type number Marking code
PESD3V3S1UL G1
PESD5V0S1UL G2
PESD12VS1UL G3
PESD15VS1UL G4
PESD24VS1UL G5

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 2 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

5. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
PPP peak pulse power tp = 8/20 s [1] - 150 W
IPP peak pulse current tp = 8/20 s [1]

PESD3V3S1UL - 15 A
PESD5V0S1UL - 15 A
PESD12VS1UL - 5 A
PESD15VS1UL - 5 A
PESD24VS1UL - 3 A
Tj junction temperature - 150 C
Tamb ambient temperature 65 +150 C
Tstg storage temperature 65 +150 C

[1] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5.

Table 6. ESD maximum ratings

Symbol Parameter Conditions Min Max Unit
VESD electrostatic discharge voltage IEC 61000-4-2 [1]

(contact discharge)
PESD3V3S1UL - 30 kV
PESD5V0S1UL - 30 kV
PESD12VS1UL - 30 kV
PESD15VS1UL - 30 kV
PESD24VS1UL - 23 kV
PESDxS1UL series MIL-STD-883 - 10 kV
(human body model)

[1] Device stressed with ten non-repetitive ESD pulses.

Table 7. ESD standards compliance

Standard Conditions
IEC 61000-4-2; level 4 (ESD) > 15 kV (air); > 8 kV (contact)
MIL-STD-883; class 3B (human body model) > 8 kV

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 3 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

001aaa631

001aaa630 IPP
120
100 %

100 % IPP; 8 μs 90 %
IPP
(%)

80
e−t

50 % IPP; 20 μs

40

10 %

tr = 0.7 ns to 1 ns t
0
0 10 20 30 40 30 ns
t (μs) 60 ns

Fig 1. 8/20 s pulse waveform according to Fig 2. ESD pulse waveform according to
IEC 61000-4-5 IEC 61000-4-2

6. Characteristics
Table 8. Characteristics
Tamb = 25 C unless otherwise specified
Symbol Parameter Conditions Min Typ Max Unit
VRWM reverse standoff voltage
PESD3V3S1UL - - 3.3 V
PESD5V0S1UL - - 5.0 V
PESD12VS1UL - - 12 V
PESD15VS1UL - - 15 V
PESD24VS1UL - - 24 V
IRM reverse leakage current
PESD3V3S1UL VRWM = 3.3 V - 0.7 2 A
PESD5V0S1UL VRWM = 5.0 V - 0.1 1 A
PESD12VS1UL VRWM = 12 V - <1 50 nA
PESD15VS1UL VRWM = 15 V - <1 50 nA
PESD24VS1UL VRWM = 24 V - <1 50 nA
VBR breakdown voltage IR = 5 mA [1]

PESD3V3S1UL 5.2 5.6 6.0 V

PESD5V0S1UL 6.4 6.8 7.2 V
PESD12VS1UL 14.7 15.0 15.3 V
PESD15VS1UL 17.6 18.0 18.4 V
PESD24VS1UL 26.5 27.0 27.5 V

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 4 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

Table 8. Characteristics …continued

Tamb = 25 C unless otherwise specified
Symbol Parameter Conditions Min Typ Max Unit
Cd diode capacitance f = 1 MHz; VR = 0 V
PESD3V3S1UL - 207 300 pF
PESD5V0S1UL - 152 200 pF
PESD12VS1UL - 38 75 pF
PESD15VS1UL - 32 70 pF
PESD24VS1UL - 23 50 pF
VCL clamping voltage [2]

PESD3V3S1UL IPP = 1 A - - 8 V
IPP = 15 A - - 20 V
PESD5V0S1UL IPP = 1 A - - 9 V
IPP = 15 A - - 20 V
PESD12VS1UL IPP = 1 A - - 19 V
IPP = 5 A - - 35 V
PESD15VS1UL IPP = 1 A - - 23 V
IPP = 5 A - - 40 V
PESD24VS1UL IPP = 1 A - - 36 V
IPP = 3 A - - 70 V
rdif differential resistance
PESD3V3S1UL IR = 1 mA - - 400 
PESD5V0S1UL IR = 1 mA - - 80 
PESD12VS1UL IR = 1 mA - - 200 
PESD15VS1UL IR = 1 mA - - 225 
PESD24VS1UL IR = 0.5 mA - - 300 

[1] Pulse test: tp  300 s; duty cycle  0.02.

[2] Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5.

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 5 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

001aaa726 001aaa193
104 1.2

PPP PPP
(W) PPP(25°C)

103 0.8

102 0.4

10 0
1 10 102 103 0 50 100 150 200
tp (μs) Tj (°C)

Tamb = 25 C
Fig 3. Peak pulse power as a function of exponential Fig 4. Relative variation of peak pulse power as a
pulse duration; typical values function of junction temperature; typical
values

001aaa727 001aaa728
240 50
Cd Cd
(pF) (pF)
200 40

160 30
(1)

120 20
(2) (1)

(2)
80 10
(3)

40 0
0 1 2 3 4 5 0 5 10 15 20 25
VR (V) VR (V)

f = 1 MHz; Tamb = 25 C f = 1 MHz; Tamb = 25 C

(1) PESD3V3S1UL; VRWM = 3.3 V (1) PESD12VS1UL; VRWM = 12 V
(2) PESD5V0S1UL; VRWM = 5.0 V (2) PESD15VS1UL; VRWM = 15 V
(3) PESD24VS1UL; VRWM = 24 V
Fig 5. Diode capacitance as a function of reverse Fig 6. Diode capacitance as a function of reverse
voltage; typical values voltage; typical values

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 6 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

I
001aaa729
10

IRM
IRM(25°C)
(1)

(2) −VCL −VBR −VRWM V

−IRM
1
−IR

− +

P-N

10−1 −IPP
−100 −50 0 50 100 150
Tj (°C) 006aaa407

(1) PESD3V3S1UL; VRWM = 3.3 V

(2) PESD5V0S1UL; VRWM = 5.0 V
IR is less than 15 nA at 150 C for:
PESD12VS1UL; VRWM = 12 V
PESD15VS1UL; VRWM = 15 V
PESD24VS1UL; VRWM = 24 V
Fig 7. Relative variation of reverse leakage current Fig 8. V-I characteristics for a unidirectional ESD
as a function of junction temperature; typical protection diode
values

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 7 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

ESD TESTER RG 223/U 4 GHz DIGITAL

Rd 450 Ω 50 Ω coax OSCILLOSCOPE
10×
ATTENUATOR

Cs 50 Ω

note 1

D.U.T.
(DEVICE
UNDER
TEST)
Note 1: IEC 61000-4-2 network
Cs = 150 pF; Rd = 330 Ω

vertical scale = 200 V/div vertical scale = 20 V/div

horizontal scale = 50 ns/div horizontal scale = 50 ns/div

PESD24VS1UL
GND

PESD15VS1UL
GND

GND PESD12VS1UL

GND PESD5V0S1UL
GND
GND PESD3V3S1UL

unclamped +1 kV ESD voltage waveform clamped +1 kV ESD voltage waveform

(IEC 61000-4-2 network) (IEC 61000-4-2 network)

GND

GND

vertical scale = 200 V/div vertical scale = 10 V/div

horizontal scale = 50 ns/div horizontal scale = 50 ns/div

unclamped −1 kV ESD voltage waveform clamped −1 kV ESD voltage waveform

(IEC 61000-4-2 network) (IEC 61000-4-2 network)
006aaa682

Fig 9. ESD clamping test setup and waveforms

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 8 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

7. Application information
The PESDxS1UL series is designed for protection of one unidirectional data line from the
damage caused by ESD and surge pulses. The PESDxS1UL series may be used on lines
where the signal polarities are either positive or negative with respect to ground. The
PESDxS1UL series provides a surge capability of 150 W for an 8/20 s waveform.

line to be protected line to be protected

(positive signal polarity) (negative signal polarity)

PESDxS1UL PESDxS1UL

ground ground

unidirectional protection of one line

006aaa681

Fig 10. Application diagram

Circuit board layout and protection device placement

Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:

1. Place the PESDxS1UL as close to the input terminal or connector as possible.

2. The path length between the PESDxS1UL and the protected line should be
minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.

8. Test information

8.1 Quality information

This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 9 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

9. Package outline

0.62 0.50
0.55 0.46

0.30 2
0.22

0.65 1.02
0.95

0.30
0.22 1

0.55 cathode marking on top side (if applicable)

0.47

Dimensions in mm 03-04-17

Fig 11. Package outline SOD882

10. Packing information

Table 9. Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number Package Description Packing quantity
10000
PESD3V3S1UL SOD882 4 mm pitch, 8 mm tape and reel -315
PESD5V0S1UL
PESD12VS1UL
PESD15VS1UL
PESD24VS1UL

[1] For further information and the availability of packing methods, see Section 14.

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 10 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

11. Soldering

1.3

0.7 R0.05 (8×)

solder lands

0.6 0.7 0.8 solder resist

0.9
(2×) (2×) (2×)
solder paste

occupied area

0.3
Dimensions in mm
(2×)
0.4
(2×)
0.5
(2×) sod882_fr

Reflow soldering is the only recommended soldering method.

Fig 12. Reflow soldering footprint SOD882

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 11 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

12. Revision history

Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PESDXS1UL_SER v.3 20111025 Product data sheet - PESDXS1UL_SER v.2
Modifications: • Section 1.2 “Features and benefits”: updated
• Table 7: updated
• Table 8: added pulse conditions for breakdown voltage VBR
• Section 8 “Test information”: added
• Section 11 “Soldering”: added
• Section 13 “Legal information”: updated
PESDXS1UL_SER v.2 20090820 Product data sheet - PESDXS1UL_SER v.1
PESDXS1UL_SER v.1 20060331 Product data sheet - -

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 12 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

13. Legal information

13.1 Data sheet status

Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.

13.2 Definitions malfunction of an NXP Semiconductors product can reasonably be expected

to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
Draft — The document is a draft version only. The content is still under
NXP Semiconductors products in such equipment or applications and
internal review and subject to formal approval, which may result in
therefore such inclusion and/or use is at the customer’s own risk.
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of Applications — Applications that are described herein for any of these
information included herein and shall have no liability for the consequences of products are for illustrative purposes only. NXP Semiconductors makes no
use of such information. representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended Customers are responsible for the design and operation of their applications
for quick reference only and should not be relied upon to contain detailed and and products using NXP Semiconductors products, and NXP Semiconductors
full information. For detailed and full information see the relevant full data accepts no liability for any assistance with applications or customer product
sheet, which is available on request via the local NXP Semiconductors sales design. It is customer’s sole responsibility to determine whether the NXP
office. In case of any inconsistency or conflict with the short data sheet, the Semiconductors product is suitable and fit for the customer’s applications and
full data sheet shall prevail. products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
Product specification — The information and data provided in a Product design and operating safeguards to minimize the risks associated with their
data sheet shall define the specification of the product as agreed between applications and products.
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however, NXP Semiconductors does not accept any liability related to any default,
shall an agreement be valid in which the NXP Semiconductors product is damage, costs or problem which is based on any weakness or default in the
deemed to offer functions and qualities beyond those described in the customer’s applications or products, or the application or use by customer’s
Product data sheet. third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
13.3 Disclaimers the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.

Limited warranty and liability — Information in this document is believed to Limiting values — Stress above one or more limiting values (as defined in
be accurate and reliable. However, NXP Semiconductors does not give any the Absolute Maximum Ratings System of IEC 60134) will cause permanent
representations or warranties, expressed or implied, as to the accuracy or damage to the device. Limiting values are stress ratings only and (proper)
completeness of such information and shall have no liability for the operation of the device at these or any other conditions above those given in
consequences of use of such information. the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
In no event shall NXP Semiconductors be liable for any indirect, incidental,
repeated exposure to limiting values will permanently and irreversibly affect
punitive, special or consequential damages (including - without limitation - lost
the quality and reliability of the device.
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such Terms and conditions of commercial sale — NXP Semiconductors
damages are based on tort (including negligence), warranty, breach of products are sold subject to the general terms and conditions of commercial
contract or any other legal theory. sale, as published at http://www.nxp.com/profile/terms, unless otherwise
Notwithstanding any damages that customer might incur for any reason agreed in a valid written individual agreement. In case an individual
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards agreement is concluded only the terms and conditions of the respective
customer for the products described herein shall be limited in accordance agreement shall apply. NXP Semiconductors hereby expressly objects to
with the Terms and conditions of commercial sale of NXP Semiconductors. applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without No offer to sell or license — Nothing in this document may be interpreted or
limitation specifications and product descriptions, at any time and without construed as an offer to sell products that is open for acceptance or the grant,
notice. This document supersedes and replaces all information supplied prior conveyance or implication of any license under any copyrights, patents or
to the publication hereof. other industrial or intellectual property rights.

Suitability for use — NXP Semiconductors products are not designed, Export control — This document as well as the item(s) described herein
authorized or warranted to be suitable for use in life support, life-critical or may be subject to export control regulations. Export might require a prior
safety-critical systems or equipment, nor in applications where failure or authorization from competent authorities.

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 13 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this
13.4 Trademarks
document, and as such is not complete, exhaustive or legally binding. Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.

14. Contact information

For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com

PESDXS1UL_SER All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.

Product data sheet Rev. 3 — 25 October 2011 14 of 15

NXP Semiconductors PESDxS1UL series
Unidirectional ESD protection diodes

15. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2
4 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Application information. . . . . . . . . . . . . . . . . . . 9
8 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 9
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 9
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
10 Packing information . . . . . . . . . . . . . . . . . . . . 10
11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
13.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14 Contact information. . . . . . . . . . . . . . . . . . . . . 14
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.

© NXP B.V. 2011. All rights reserved.

For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 25 October 2011
Document identifier: PESDXS1UL_SER
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Nexperia:
PESD12VS1UL,315 PESD15VS1UL,315 PESD24VS1UL,315 PESD3V3S1UL,315 PESD5V0S1UL,315