601 A Truck Mounted Drilling Rig
PAT-Drill 601 is a truck mounted drill rig powered by a deck
engine mounted on a rail chassis to fit any suitable 15,000 kg
GVW truck.
For down-the-hole-hammer and mud rotary drilling up to 400 m
depth 150-305 mm diameter – according to tool selection.
Key Features :
Mast can accomodate 3, 4 m drill pipes 90/100/120mm diameter.
Mast can be ‘raised’ and ‘dumped’ to make clearance to set surface casing or suit drill pipe handling.
Rig table 400mm opening.
Advanced Hydrauilic Circuit - close loop electro/mechanical control valves for efficent power delivery.
Options for PTO full power & deck mounted compressors & mud pumps.
TECHNICAL DATA & SPECIFICATION
RECOMMENDED HOLE RANGE (Depths to 400 m)
Medium & Hard rock, DTH-Hammer drilling :
(Needs a seperated air compressor)
6” - 8” DTH-Hammer with the capacity to drill
6” - 12” (150-305 mm) diameter.
Soft formations, rotary ‘mud’ drilling :
(Needs a seperated mud pump)
Drag bit or PDC drill bit 6” -15” (150-380 mm) diameter.
TOP ROTATION HEAD
Double reduction gearbox, A hydraulic motor driven, and
variable rotation speed. Enable to swing-a-side for easily
casing installation. 50 mm (2”) Air/water pipe work & flanged
drill pipe adaptor inside diameter, sub joint 2 3/8 API Reg IF /
2 7/8 API Reg.
Gear box ratio 4:1
Speed 0 – 90 rpm
Max. torque 6,540 Nm
MAST
All steel work 300x300 mm. , 7.50 metres long, break-out table WATER/FOAM INJECTION PUMP
to open 400 mm diameter. Mast raised to vertical from storage Triple piston pump driven by a hydraulic motor.
position by a hydraulic cylinder through heavy duty chain. Motor speed: 450 rpm
The machine is also equipped with 4 LED flood lights for night Max. displacement: 10 litres/min
time operation. Max. working pressure: 35 bar
FEED SYSTEM STABLISING JACK
Rotation head is raised and lowered by a hydraulic cylinder and 4 jacks hydraulic, re-positional to adjust ground clearance.
heavy- duty transmission chain. Head travelling stroke 5.85 metres.
Pull up - Capacity: 9,500 kg AIR LUBRICATION SYSTEM
Max. speed: 30 metres/min Fitted lubricator of piston pump electric control type to inject
lubrication-fully adjustable flow control-for DTH-Hammer.
Max pressure: 45 bar
OPERATION CONTROL PANEL Oil tank capacity: 20 litres
5 levers controlling rotation head, pull and feed, winch
2 regulators for rotation speed, pull/feed weight DRILL PIPE
5 system pressure gauges Drill pipe length: 3,4 metres
Ridgid mounted control panel with lockable cover plate. Drill pipe diameter: 90 mm
HYDRAULIC POWER PACK TRUCK
Engine: 85 hp (63.9 kW) at 2500 rpm, 4 cylinders, YANMAR HINO Model: FG8J1D, Truck (GVW) 15,000 Kg capacity 4.30 m.
4TNV98T diesel engine turbo charged, water-cooled, electric cargo body length on 700 mm. over face chassis rails.
start. Suspension: Leaf springs and shock absorbers.
Hydraulic system: Piston pumps type, system pressure 310 bar Wheels & Tyres: 7.5x20/11.00-20-16 PR
max, 450 litres tank capacity.
Fuel tank: Engine truck
601
DIMENSIONS
Overall length : (L) 7.3 m
H Overall width : 2.50 m
Overall height : (H) 3.60 m
Weight (without drill pipes) 11,200 kg
Promotion of Appropriate Technology Co.,Ltd. reserves the right to change these specifications without notice
PROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD
44 M4 CHIANGRAKNOI, SAMKOK PATHUMTHANI 12160 THAILAND
Phone +66(0)2199 3785 Fax+66(0)2199 3787 www.pat-drill.com Email: pat@pat-drill.com
